Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Passive Monitors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Active/Passive Remote Sensing of a Mature Soybean Canopy at L-band

This paper reports on development of a scattering model of a soybean canopies at L-band. The scattering model will be used for active and passive remote sensing of soybean plants with an emphasis on mature soybeans where the presence of pods is important to the observed microwave signal. The active problem is treated using the Distorted Born Approximation (DBA) and the passive problem is analyzed using Peake's method. These results are compared with field measurements made in 2012 by the truck-mounted ComRAD system, which is a combined radar and radiometer instrument operating at L-band. Investigation of backscatter from the soybean canopy shows good agreement between the radar measurement data and modeling results. The results also indicate that the L-band radar backscatter can be used to monitor both the soil moisture and the growth of the soybean pods. Past passive modeling efforts have not considered soybeans late in the growing season when pods are important. A new passive radiation model of soybean canopy will be developed based on the backscatter model.

Yiwen Zhou↗
NASA NTRS1995

Automated Facility For Cleaning Large Flex Hoses

Technicians no longer exposed to hazardous cleaning materials. Proposed computer-controlled facility cleans bellow-type expansion joints and large flex hoses. Major portions of automated cleaning facility contained in clean room. One piece of equipment in clean room tower in which hose or expansion joint to be cleaned hoisted by hydraulic machinery and hung vertically. Once hose or expansion joint hung in required position, technician initiates programmed cleaning procedure from console on computer monitoring system. Procedure includes degreasing, cleaning with detergents, rinsing, pickling, and passivating operations. After cleaning completed, technician removes hose or expansion joint from tower and wraps open ends to prevent recontamination of interior.

Landry, Louis E.↗
NASA NTRS1997

Environmental Radiation Measurements on MIR Station: Internal Experiment - Program 1

Environmental radiation levels on the Russian space station Mir are being monitored under differing shielding conditions by a series of six area passive dosimeters (APDs) placed at individual locations inside the Core and Kvant 2 modules, and by an External Dosimeter Array (EDA) to be-deployed on the exterior surface of the Kvant 2 module. Each APD and the EDA contains CR-39 plastic nuclear track detectors (PNTDs) for measurement of LET spectra and TLDs for absorbed dose measurements. Two of the missions, NASA-2/Mir-21 and NASA-3/Mir-22 have been completed and the six APDs from each mission returned to Earth from Mir. This report covers progress to date on the analysis of TLDs and PNTDs from these two missions. For NASA-2/Mir-21, average mission absorbed dose rates varied from 271 to 407 micro-Gy/d at the APDS. For NASA-3/Mir-22, average mission absorbed dose rates varied from 265 to 421 micro-Gy/d.

Benton, E. V.↗
NASA NTRS2003

The HYDROS Mission: Requirements and Baseline System Design

The HYDROS mission is under development by NASA as part of its Earth System Science Pathfinder (ESSP) program. HYDROS is designed to provide global maps of the Earth's soil moisture and freezel/thaw state every 2-3 days, for weather and climate prediction, water and carbon cycle studies, natural hazards monitoring, and national security applications. HYDROS uses a unique active and passive L-band microwave system that optimizes measurement accuracy, spatial resolution, and coverage. It provides measurements in nearly all weather conditions, regardless of solar illumination. The designs of the radar and radiometer electronics, antenna feedhorn and reflector, and science data system, are driven by specific mission and science objectives. These objectives impose requirements on the frequencies, polarizations, sampling, spatial resolution, and accuracy of the system. In this paper we describe the HYDROS mission requirements, baseline design, and measurement capabilities.

soil moisture↗
NASA NTRS2005

Deployable Mini-Payload Missions Enabled by Small Radioisotope Power Systems (RPSs)

Deployable mini-payloads are envisioned as small, simple, standalone instruments that could be deployed from a mother vehicle such as a rover or the proposed Jupiter Icy Moons Orbiter to key points of interest within the solar system. Used in conjunction with a small radioisotope power system (RPS), these payloads could potentially be used for long-duration science missions or as positional beacons for rovers or other spacecraft. The RPS power source would be suitable for deployable mini-payload missions that would take place anywhere there is limited, intermittent, or no solar insolation. This paper introduces two such concepts: (1) a seismic monitoring station deployed by a rover or aerobot, and (2) a passive fields and particles station delivered by a mother spacecraft to Jupiter.

deployables↗
NASA NTRS2011

Impact of January 2005 Solar Proton Events on Chlorine Species

Sudden changes in stratospheric chlorine species in the polar northern atmosphere, caused by the Solar Proton Events (SPEs) of 17 and 20 January 2005, have been investigated and compared with version 4 of the Whole Atmosphere Community Climate Model (WACCM4). We used Aura Microwave Limb Sounder (MLS) measurements to monitor the variability of ClO, HCl, HOCl and Michelson Interferometer for Passive Atmospheric Sounder (MIPAS) on ENVISAT to retrieve ClONO2. SPE-induced chlorine activation has been identified. HCl decrease occurred at nearly all the investigated altitudes with the lowest values (of less than 0.25 ppbv) on 21 January. HOCl was found to be the main active chlorine species under nighttime conditions (with increases of more than 0.2 ppbv) whereas both HOCL and CLO enhancements (about 0.1 ppbv) have been observed at the polar night terminator. Further, small ClO decreases (of less than 0.1 ppbv) and ClONO2 enhancements (~0.2 ppbv) have been observed at higher latitudes (i.e., at nighttime) roughly above 2hPa. While WACCM4 reproduces most of the SPE-induced variability in the chlorine species fairly well, in some particular regions discrepancies between the modeled and measured temporal evolution of the abundances of chlorine species were found. HOCl changes are modelled very well with respect to both magnitude and geographic distribution. ClO decreases are reproduced at high latitudes, whereas ClO enhancements in the terminator region are underestimated and attributed to background variations. WACCM4 also reproduces the HCl depletion in the mesosphere but it does not show the observed decrease below about 2 hPa. Finally, WACCM4 simulations indicate that the observed ClONO2 increase is dominated by background variability, although SPE-induced production might contribute by 0.1 ppbv.

Damiani, A.↗
NASA NTRS2012

Impact of January 2005 Solar Proton Events on Chlorine Species

Sudden changes in stratospheric chlorine species in the polar northern atmosphere, caused by the Solar Proton Events (SPEs) of 17 and 20 January 2005, have been investigated and compared with version 4 of the Whole Atmosphere Community Climate Model (WACCM4). We used Aura Microwave Limb Sounder (MLS) measurements to monitor the variability of ClO, HCl, HOCl and Michelson Interferometer for Passive Atmospheric Sounder (MIPAS) on ENVISAT to retrieve ClONO2. SPE-induced chlorine activation has been identified. HCl decrease occurred at nearly all the investigated altitudes (i.e., 10-0.5 hPa) with the strongest decrease (of about 0.25 ppbv) on 21 January. HOCl was found to be the main active chlorine species under nighttime conditions (with increases of more than 0.2 ppbv) whereas both HOCl and ClO enhancements (about 0.1 ppbv) have been observed at the polar night terminator. Further, small ClO decreases (of less than 0.1 ppbv) and ClONO2 enhancements (about 0.2 ppbv) have been observed at higher latitudes (i.e., at nighttime) roughly above 2 hPa. While WACCM4 reproduces most of the SPE-induced variability in the chlorine species fairly well, in some particular regions discrepancies between the modeled and measured temporal evolution of the abundances of chlorine species were found. HOCl changes are modelled very well with respect to both magnitude and geographic distribution. ClO decreases are reproduced at high latitudes, whereas ClO enhancements in the terminator region are underestimated and attributed to background variations. WACCM4 also reproduces the HCl depletion in the mesosphere but it does not show the observed decrease below about 2 hPa. Finally, WACCM4 simulations indicate that the observed ClONO2 increase is dominated by background variability, although SPE-induced production might contribute by 0.1 ppbv.

Damiani, A.↗
NASA NTRS2013

Wireless Sensor Applications in Extreme Aeronautical Environments

NASA aeronautical programs require rigorous ground and flight testing. Many of the testing environments can be extremely harsh. These environments include cryogenic temperatures and high temperatures (greater than 1500 C). Temperature, pressure, vibration, ionizing radiation, and chemical exposure may all be part of the harsh environment found in testing. This paper presents a survey of research opportunities for universities and industry to develop new wireless sensors that address anticipated structural health monitoring (SHM) and testing needs for aeronautical vehicles. Potential applications of passive wireless sensors for ground testing and high altitude aircraft operations are presented. Some of the challenges and issues of the technology are also presented.

Wilson, William C.↗
NASA NTRS2016

Towards Validation of SMAP: SMAPEX-4 & -5

The L-band (1 - 2 GHz) microwave remote sensing has been widely acknowledged as the most promising method to monitor regional to global soil moisture. Consequently, the Soil Moisture Active Passive (SMAP) satellite applied this technique to provide global soil moisture every 2 to 3 days. To verify the performance of SMAP, the fourth and fifth campaign of SMAP Experiments (SMAPEx-4 -5) were carried out at the beginning of the SMAP operational phase in the Murrumbidgee River catchment, southeast Australia. The airborne radar and radiometer observations together with ground sampling on soil moisture, vegetation water content, and surface roughness were collected in coincidence with SMAP overpasses. The SMAPEx-4 and -5 data sets will benefit to SMAP post-launch calibration andvalidation under Australian land surface conditions.

Ye, Nan↗
NASA NTRS2017

Modelling the Passive Microwave Signature from Land Surfaces: A Review of Recent Results and Application to the L-Band SMOS SMAP Soil Moisture Retrieval Algorithms

Two passive microwave missions are currently operating at L-band to monitor surface soil moisture (SM) over continental surfaces. The SMOS sensor, based on an innovative interferometric technology enabling multi-angular signatures of surfaces to be measured, was launched in November 2009. The SMAP sensor, based on a large mesh reflector 6 m in diameter providing a conically scanning antenna beam with a surface incidence angle of 40deg, was launched in January of 2015. Over the last decade, an intense scientific activity has focused on the development of the SM retrieval algorithms for the two missions. This activity has relied on many field (mainly tower-based) and airborne experimental campaigns, and since 2010-2011, on the SMOS and Aquarius space-borne L-band observations. It has relied too on the use of numerical, physical and semi-empirical models to simulate the microwave brightness temperature of natural scenes for a variety of scenarios in terms of system configurations (polarization, incidence angle) and soil, vegetation and climate conditions. Key components of the inversion models have been evaluated and new parameterizations of the effects of the surface temperature, soil roughness, soil permittivity, and vegetation extinction and scattering have been developed. Among others, global maps of select radiative transfer parameters have been estimated very recently. Based on this intense activity, improvements of the SMOS and SMAP SM inversion algorithms have been proposed. Some of them have already been implemented, whereas others are currently being investigated. In this paper, we present a review of the significant progress which has been made over the last decade in this field of research with a focus on L-band, and a discussion on possible applications to the SMOS and SMAP soil moisture retrieval approaches.

SMOS↗
NASA NTRS1997

Arctic and Antarctic Sea Ice Concentrations from Multichannel Passive-Microwave Satellite Data Sets: October 1978-September 1995 User's Guide

Satellite multichannel passive-microwave sensors have provided global radiance measurements with which to map, monitor, and study the Arctic and Antarctic polar sea ice covers. The data span over 18 years (as of April 1997), starting with the launch of the Scanning Multichannel Microwave Radiometer (SMMR) on NASA's SeaSat A and Nimbus 7 in 1978 and continuing with the Defense Meteorological Satellite Program (DMSP) Special Sensor Microwave/Imager (SSMI) series beginning in 1987. It is anticipated that the DMSP SSMI series will continue into the 21st century. The SSMI series will be augmented by new, improved sensors to be flown on Japanese and U.S. space platforms. This User's Guide provides a description of a new sea ice concentration data set generated from observations made by three of these multichannel sensors. The data set includes gridded daily ice concentrations (every-other-day for the SMMR data) for both the north and south polar regions from October 26, 1978 through September 30, 1995, with the one exception of a 6-week data gap from December 3, 1987 through January 12, 1988. The data have been placed on two CD-ROMs that include a ReadMeCD file giving the technical details on the file format, file headers, north and south polar grids, ancillary data sets, and directory structure of the CD-ROM. The CD-ROMS will be distributed by the National Snow and Ice Data Center in Boulder, CO.

Sea ice concentration↗
NASA NTRSDate not supplied

Development of a Photoacoustic Formaldehyde Monitor

Key indoor air quality pollutant formaldehyde (H 2 CO) is tracked on International Space Station (ISS) using passive badges returned to the ground periodically for analysis. The process is time-consuming both in preparation and for analysis upon return 6-12 months later. Badges also require precious crew time for deploy, retrieval and stow. As NASA’s focus in space exploration shifts to the Moon and Mars, archival sample return becomes increasingly impractical, so the aim of this project is to develop a highly reliable real-time analyzer for H 2 CO at low concentrations with data downlinked. Potential sources of H 2 CO include materials off gassing, use of formalin as a tissue fixative in biological payloads and overheating of acetal polymers. The Spacecraft Maximum Allowable Concentration (SMAC) for H 2 CO in air is 100 ppb for exposures of 7 days or longer. ISS concentrations of H 2 CO are running only 10 - 30 ppb in the recent several years but have spiked as high as 60 ppb. Gateway real time monitoring requirements for H 2 CO call for a range of 8 - 138 ppb. For this project, a concentration range of 5 - 500 ppb H 2 CO is targeted. The core tunable diode laser spectroscopy (TDLS) technology used for this project was developed by Vista Photonics through the NASA and US Navy Small Business Innovation Research (SBIR) programs. Monitors based on TDLS have been demonstrated on ISS, trialed on a nuclear submarine and are being certified as portable Anomaly Gas Analyzers (AGA) for both ISS and Orion. Initially, direct absorption TDLS was used exclusively in these devices. The H 2 CO target concentration, however, is low ppb, and a longer wavelength is required, so a photoacoustic spectroscopy (PAS) technique was adapted, where the laser excitation is detected by a sensitive microphone vs. a conventional photodetector. This paper will discuss the results of NASA-JSC laboratory testing of a prototype PAS based formaldehyde in air monitor and briefly discuss next steps.

Photoacoustic Formaldehyde Monitor↗
NASA NTRS1992

Botswana water and surface energy balance research program. Part 2: Large scale moisture and passive microwaves

The Botswana water and surface energy balance research program was developed to study and evaluate the integrated use of multispectral satellite remote sensing for monitoring the hydrological status of the Earth's surface. The research program consisted of two major, mutually related components: a surface energy balance modeling component, built around an extensive field campaign; and a passive microwave research component which consisted of a retrospective study of large scale moisture conditions and Nimbus scanning multichannel microwave radiometer microwave signatures. The integrated approach of both components are explained in general and activities performed within the passive microwave research component are summarized. The microwave theory is discussed taking into account: soil dielectric constant, emissivity, soil roughness effects, vegetation effects, optical depth, single scattering albedo, and wavelength effects. The study site is described. The soil moisture data and its processing are considered. The relation between observed large scale soil moisture and normalized brightness temperatures is discussed. Vegetation characteristics and inverse modeling of soil emissivity is considered.

Vandegriend, A. A.↗
NASA NTRS2021

Impact of Random and Periodic Surface Roughness on P- and L-band Radiometry

L-band passive microwave remote sensing is currently considered a robust technique for global monitoring of soil moisture. However, soil roughness complicates the relationship between brightness temperature and soil moisture, with current soil moisture retrieval algorithms typically assuming a constant roughness parameter globally, leading to a potential degradation in retrieval accuracy. This current investigation established a tower-based experiment site in Victoria, Australia. P-band (~40-cm wavelength/0.75 GHz) was compared with L-band (~21-cm wavelength/1.41 GHz) over random and periodic soil surfaces to determine if there is an improvement in brightness temperature simulation and soil moisture retrieval accuracy for bare soil conditions, due to reduced roughness impact when using a longer wavelength. The results showed that P-band was less impacted by random and periodic roughness than L-band, evidenced by more comparable statistics across different roughness conditions. The roughness effect from smooth surfaces (e.g., 0.8-cm root-mean-square height and 11.1-cm correlation length) could be potentially ignored at both P- and L-band with satisfactory simulation and retrieval performance. However, for rougher soil (e.g., 1.6-cm root-mean-square height and 6.8-cm correlation length), the roughness impact needed to be accounted for at both P- and L-band, with P-band observations showing less impact than L-band. Moreover, a sinusoidal soil surface with 10-cm amplitude and 80-cm period substantially impacted the brightness temperature simulation and soil moisture retrieval at both P- and L-band, which could not be fully accounted for using the SMOS and SMAP default roughness parameters. However, when retrieving roughness parameters along with soil moisture, the ubRMSE at P-band over periodic soil was improved to a similar level (0.01-0.02 m3/m3) as that of smooth flat soil (0.01 m3/m3), while L-band showed higher ubRMSE over the periodic soil (0.03-0.04 m3/m3) than over smooth flat soil (0.01 m3/m3). Accordingly, periodic roughness effects were reduced by using observations at P-band.

Soil roughness↗
NASA NTRS1988

An overview of a tether deployment monitoring system

A study was conducted to investigate the feasibility of monitoring the position of a tether during tether deployment. Several major configurations were investigated, including considerations of passive or active optical detection, radar, lidar, and active instrumentation packages. Cost, weight, the impact on tether operational dynamics, and the orbiter integration considerations were studied for each of these methods. Results indicated that implementation of such a monitoring system can be accomplished with little or no impact on tether deployment operations. Design diagrams are presented for two launchers and a tether attitude/tension detector.

Ibanez, P.↗
NASA NTRS1981

The Bristol method of satellite-improved rainfall monitoring

Remote sensing estimates of area average precipitation are useful to agricultural and climatological applications. Estimates obtained by active or passive microwaves, infrared and visible sensors may be augmented and improved using indirect measures of precipitation, such as the change in near surface soil moisture content caused by a particular event. Measurements of soil moisture using infrared radiances do not provide precipitation information in real time since the sky must clear. However, the resultant estimate of precipitation is a time integrated value which provides a significant savings in data handling and can overcome virtually all of the sampling problems associated with the monitoring of precipitation through storms of long duration.

Barrett, E. C.↗
DOE OSTI2022

Detecting thermal crack growth on a large additive manufactured structure using acoustic emission

Large format additive manufacturing (LFAM) proved to have a great potential to become an adjacent technology to traditional manufacturing methods. One of the sectors LFAM is targeting is rapid tool/mold development for composites. This includes large mold structures used for high-temperature molding techniques (in-oven or autoclave). Although, these large printed structures (reaching hundreds of pounds) develop thermal-residual stress during cool-down and can eventually crack, turning the structure into waste. Acoustic emission (AE), a passive non-intrusive global nondestructive evaluation (NDE) technique, was used to monitor crack growth and can provide the right tools that can be used for feedback loop for corrective action. This research performs thermal testing on a large AM mold with preexisting cracks, in an attempt to monitor crack growth using AE. AE was able to detect, identify and locate the crack source by means of acoustic features, waveform characteristics, spectrum analysis, and difference in arrival times.

Spencer, Ryan↗