Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PYROXENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Noritic fragments in the Apollo 14 and 12 soils and the origin of Oceanus Procellarum.

Fragments of noritic breccias having a range of recrystallization textures and noritic basalts comprise about 80% of the 1 to 2 mm soil samples from Cone Crater (14142) and the bottom of the trench (14151). In five other samples, noritic fragments range in abundance from 42 to 56%. The remaining particles in each case are glasses, soil breccias, and glass-bonded aggregates; other crystalline rock types such as anorthosites constitute less than 1% of the soil. Noritic materials - i.e., Apollo 12 and 14 norites and ropy (KREEP) glass particles, can be divided into two broad groups on a chemical basis. The particles in one group have relatively high bulk TiO2 contents and high Fe/(Fe + Mg) ratios in their normative pyroxenes; the ropy glasses from Apollo 12 and 14 and a few Apollo 12 noritic rock fragments are in this category. Particles in the other class contain pyroxenes with a lower Fe/(Fe + Mg) and have a range of TiO2 contents; most noritic rock fragments from Apollo 12 and 14 are in this group. The ropy glasses may be from Copernicus or other rayed craters, but almost all the norites derive from the Fra Mauro formation or other noritic occurrences associated with Oceanus Procellarum.

Taylor, G. J.↗

Ar40-Ar39 systematics in rocks and separated minerals from Apollo 14.

The Ar40-Ar39 dating technique has been applied to separated minerals (plagioclase, pyroxene, quintessence and an 'ilmenite' concentrate), and whole rock samples of Apollo 14 rocks 14310 and 14073. Plagioclase shows the best gas retention characteristics, with no evidence of anomalous behavior and only a small amount of gas loss in the initial release. Ages determined from the plagioclase of 14310 and 14073 are (3.87 plus or minus 0.05) and (3.88 plus or minus 0.05) AE respectively. Low apparent ages at low release temperatures, which are frequently observed in whole rock Ar40-Ar39 experiments on lunar basalts, are shown to be principally due to gas loss in the high-K interstitial glass (quintessence) phase, confirming earlier suggestions. The decrease in apparent ages in the high-temperature release previously observed in several total rock samples of Apollo 14 basalts has been identified with the pyroxene. Plagioclase is also found to be the most suitable mineral for the determination of cosmic ray exposure ages, and exposure ages of 280 and 113 m.y. are found for 14310 and 14073, respectively, indicating that these rocks, which are very similar in many respects, have different exposure histories.

Turner, G.↗

Visible and near-infra-red transmission and reflectance measurements of the Luna 20 soil.

Visible and near-infrared spectra of chemically analyzed grains of glass and minerals from the Luna 20 sample were compared with diffuse reflectance spectra of the bulk soil. As in the spectra of soil samples from other localities on the moon, pyroxene contributes two broad absorption features near 1 and 2 microns. The soil has a high integral reflectance (or albedo) arising from plagioclase, which appears to be the dominant mineral in the lunar highlands. The Luna 20 soil curve is most similar to the reflectance curves of the non-rayed soils at Apollo 16, in agreement with the generally similar mineralogy of these samples. The average pyroxene composition in the Luna 20 soil, as determined from the absorption bands in the diffuse reflectance spectra, and analyses of single crystals, is more calcic than in the lithic fragments. Thus, the soil appears to have a few per cent of admixed material derived from mare basalts. Comparison of the soil spectrum with telescopic curves of nearby areas reveals a close similarity.

Adams, J. B.↗

Luna 20 soil - Abundance and composition of phases in the 45-125 micron fraction.

Glass compositions in the Luna 20 soil indicate a minor contribution of mare rocks and a major contribution of highly feldspathic highland material. Glasses with the composition of highland basalt (anorthositic gabbro or norite) predominate in a range of highly aluminous glasses. The analyses of minerals in the soil show that the highland rocks have a unique assemblage of minerals that can readily be distinguished from the mineral assemblages of either mare or KREEP basalts. The soils are characterized by abundant anorthitic, low-Fe plagioclase. Highly magnesian orthopyroxenes, pigeonites, and augites are the most prominent pyroxenes. Unlike mare basalt pyroxenes, clinopyroxenes with intermediate Ca values are not abundant, but extreme iron enrichment toward pyroxferroite does occur. Olivines are more abundant than at other sites and are Mg-rich, low in Ca and Cr. Spinels with compositions approaching MgAl2O4 predominate over pleonastes and chromites. Ilmenite and metal are present but not abundant. The mineral compositions are consistent with derivation from a suite of highly feldspathic rocks in which highland basalt compositions predominate.

Reid, A. M.↗

High voltage electron microscopy of lunar samples

Lunar pyroxenes from Apollo 11, 12, 14, and 15 were investigated. The iron-rich and magnesium-rich pyroxene specimens were crushed to a grain size of ca. 50 microns and studied by a combination of X-ray and electron diffraction, electron microscopy, 57 Fe Mossbauer spectroscopy and X-ray crystallography techniques. Highly ordered, uniform electron-dense bands, corresponding to exsolution lamellae, with average widths of ca. 230A to 1000A dependent on the source specimen were observed. These were?qr separated by wider, less-dense interband spacings with average widths of ca. 330A to 3100A. In heating experiments, splitting of the dense bands into finer structures, leading finally to obliteration of the exsolution lamellae was recorded. The extensive exsolution is evidence for significantly slower cooling rates, or possibly annealing, at temperatures in the subsolidus range, adding evidence that annealing of rock from the surface of the moon took place at ca. 600 C. Correlation of the band structure with magnetic ordering at low temperatures and iron clustering within the bands was studied.

Fernandez-Moran, H.↗

Spectral reflectance of 72275 from Boulder 1, Station 2, Apollo 17

Spectral reflectance measurements were made of samples 72275,103 (chip) and 72275,98 (saw cuttings). Both the chips and the cuttings consist mainly of friable feldspathic breccia. Sample 72275,103, a chip taken from eastend piece 72275,27, is rich in gray polymict breccia. The saw cuttings were derived from the entire rock, but they are probably strongly biased toward the friable feldspathic matrix material that has been preferentially disaggregated. The spectra of both samples show two prominent absorption bands arising from Fe2(+) in pyroxene. The depths of these bands are large enough to preclude the presence of much glass or opaque material in the samples. From the spectral properties alone, it is clear that the samples are not soil breccias nor vitric breccias, as, of course, has been verified by petrography. The wavelengths of the principal absorption bands plot on the pyroxene trend, indicating that orthopyroxene is spectrally dominant.

Adams, J. B.↗

Spectral reflectance systematics for mixtures of powdered hypersthene, labradorite, and ilmenite

Spectral reflectance measurements in the range from 0.4- to 2.5 microns were made for synthetic powder mixtures of a single suite of plagioclase, pyroxene, and ilmenite, which are the principal mineral phase types making up virtually all lunar surface materials studied to date. Binary and ternary data plots of the parameters albedo, band depth, and red to blue ratios versus mixture composition show how variation in the concentration of each mineral phase in a mixture affects changes in the overall reflectance spectrum of the mixture. Principal mixing effects noted are (1) the disproportionate darkening effect of opaque ilmenites and (2) the persistence, the wavelength stability, and the depth versus concentration proportionality of the 1-micron band of pyroxene. These results indicate that by comparing the albedo and band depth of an unknown spectrum with calibration data obtained with laboratory standards, it is possible to determine the ratio of crystalline phases in the material producing spectra such as may be obtained telescopically from small areas on lunar and planetary surfaces.

Nash, D. B.↗

Vapor-phase crystallization of iron in lunar breccias

A vuggy breccia fragment from sample 67482 contains an iron crystal with a previously unreported crystal form, the trigonal trisoctahedron. The dominant habit is the trapezohedron with smaller cube and trisoctahedron faces. The geometric relationship of the iron crystal to the plagioclase-pyroxene substrate indicates that the iron crystal was the last mineral to form in the vug. The open network of plagioclase and pyroxene crystals lining the vug wall and the iron crystals with well-developed crystal faces suggests growth from a vapor phase.-

Clanton, U. S.↗

Apollo 17 1-2 mm fines - Mineralogy and petrology

Nine 1-2 mm Apollo 17 soil samples from the South Massif and the Sculptured Hills are examined using petrographic and microprobe techniques. Each soil was separated into six groupings based on macroscopic features observed under a stereomicroscope. The groups and their characteristics are described. Minor differences observed include a higher content of fine-grained, dark, friable breccia and a higher content of high-Mg mafic-bearing fragments in the Sculptured Hills soils. The olivine and pyroxene compositions for light breccia from the soil samples are summarized. During the soil examination, several distinctive fragments seen include coarse orthopyroxene-plagioclase fragments with diopside-rich veins, a plagioclase-forsterite fragment with an igneous texture and a pyroxene-plagioclase fragment with isotropic, subhedral plagioclase grains.

Steele, I. M.↗

Surface friction of rock in terrestrial and simulated lunar environments

The conventional probe-on-the rotating-disk concept was used to determine the surface friction in mineral probe/specimen interfaces. Nine rocks or minerals and two stainless steels were tested in both new (NT) and same track (ST) tests under three different pressure environments-atmospheric, UHV, and dry nitrogen. Each environment was further subdivided into two testing conditions, that is, ambient and elevated (135 C) temperatures. In NT tests, friction was the lowest in an atmospheric pressure condition for all rock types and increased to the largest in UHV ambient condition except for pyroxene and stainless steel. Friction values measured in dry nitrogen ambient condition lie between the two extremes. Heating tends to increase friction in atmospheric and dry nitrogen environment but decreases in UHV environment with the exception of stainless steel, basalt, and pyroxene. In ST tests, friction was the lowest in the first run and increased in subsequent runs except for stainless steel where the reverse was true. The increases leveled off after a few runs ranging from the second to the seventh depending on rock types.

Roepke, W. W.↗

An Atlas of extraterrestrial particles collected with NASA U-2 aircraft, 1974 - 1976

Extraterrestrial particles collected during U-2 flights in the stratosphere were divided into four groups: chondritic, iron-sulfur--nickel, mafic silicates, and others. The chondritic aggregates are typically composed of Fe, Mg, Si, C, S, Ca, and Ni. Detectable levels of He-4 implanted from the solar wind occur in some. Olivine, spinel, and possibly pyrrhotite and a hydrated layered-lattice silicate were identified. The chondritic ablation particles contain no sulfur and appear to have been melted. Magnetite, olivine, and pyroxene were identified. The iron-sulfur-nickel type particles resemble meteoritic iron sulfide with a small amount of nickel, and contain magnetite and troilite. The mafic silicate type particles are iron magnesium silicate grains with clumps of chondritic aggregate particles adhering to their surfaces. Olivine and possibly pyrrhotite and pyroxene were identified. Most of the iron-nickel type particles are spherules and include taenite and wustite. The other type particles include nickel-iron mounds on spheroidal glassy-like grains having chondritic-like elemental abundances.

Brownlee, D. E.↗

Experimental investigation of reaction coronas on olivine in Apollo 14 high-grade breccias

Reaction coronas of pyroxene plus or minus ilmenite occur around clasts of olivine in Apollo 14 high-grade metamorphic breccias. In experiments of several months duration, there was no evidence of corona formation at 1000 C, but at 1050, with oxygen fugacity at or above Ilm-Ru-Fe and below Fe-Fe(1-x)O, incipient coronas formed around Fo(50-70), Fo(68), En(69) + Fe. Reduction of olivine under these conditions is inconsistent with the calculated stability relations and is attributed to uncertainties in the activity coefficient for olivine or pyroxene. The experiments also suggest that vesicularity in the Apollo 14 high-grade breccias may correlate with the amount of glassy material in their unmetamorphosed precursors. The metamorphic event is attributed to burial in a hot ejecta blanket, such as that of the Imbrium event.

Kesson, S. E.↗

Crystallization history of lunar picritic basalt sample 12002 - Phase-equilibria and cooling-rate studies

Experimental crystallization of a lunar picrite composition (sample 12002) at controlled linear cooling rates produces systematic changes in the temperature at which crystalline phases appear, in the texture, and in crystal morphology as a function of cooling rate. Phases crystallize in the order olivine, chromium spinel, pyroxene, plagioclase, and ilmenite during equilibrium crystallization, but ilmenite and plagioclase reverse their order of appearance and silica crystallizes in the groundmass during controlled cooling experiments. The partition of iron and magnesium between olivine and liquid is independent of cooling rate, temperature, and pressure. Comparison of the olivine nucleation densities in the lunar sample and in the experiments indicates that the sample began cooling at about 1 deg C/hr. Pyroxene size, chemistry, and growth instability spacings, as well as groundmass coarseness, all suggest that the cooling rate subsequently decreased by as much as a factor of 10 or more. The porphyritic texture of this sample, then, is produced at a decreasing, rather than a discontinuously increasing, cooling rate.

Walker, D.↗

Partitioning of chromium between silicate crystals and melts

Experiments were performed determining the distribution of chromium between olivine, pyroxenes, and melt at oxygen fugacity values near those of lunar rocks for a wide range of bulk compositions. The range of values of D-Cr (wt% of Cr2O3 in crystals/Cr2O3 in melt) is 0.6-1.3 for olivine and 1.6-3.5 for pyroxene; this ratio shows no obvious dependence on any experimental parameter.

Huebner, J. S.↗

Compositional interrelationships of mare basalts from bulk chemical and melt inclusion studies

Petrographic and electron microprobe data (355 new analyses) are presented on melt inclusions and their host phases found in a reexamination of the Apollo thin section collection. In addition, occurrences of early armalcolite and ilmenite are described and new data are presented on quench-pyroxene compositions and melt inclusions in chromian ulvospinel. Compositional differences between mare basalt types and their melt inclusions are illustrated with plots of compositions normalized to a terrestrial lava composition, that of the 1965 Makaopuhi lava lake. The plots emphasize the fact that mare basalts are not significantly differentiated relative to the compositions that are possible as defined by the melt inclusion data. Distribution coefficients for Fe and Mg partitioning between trapped melt and host olivine and ilmenite are calculated and show a range about probable equilibrium values. It is suggested that the crystallization sequence olivine-ilmenite-plagioclase-pyroxene defined by the melt inclusion data may be the actual sequence which obtained generally for Apollo 11 and 17 mare basalts just prior to eruption.

Weiblen, P. W.↗

Isotopic and chemical investigations on Angra dos Reis

Isotope ratios and chemical abundance measurements for a variety of elements are reported for total meteorite and mineral separates of the Angra dos Reis achondrite. U-Pb, Th-Pb, and Pb-Pb ages are concordant at 4.54 eons for the total meteorite and for high-purity whitlockite, which indicates that Angra dos Reis is an early planetary differentiate that has not been disturbed for these systems since 4.54 eons ago. The implications of different ratios of Sr-87 and Sr-86 found in different components are discussed. Xe isotopic measurements show that Pu-244 was enriched in the whitlockite relative to the pyroxene by a factor of about 18. Chemical enrichment factors between the whitlockite and the fassaitic pyroxene in Angra dos Reis are presented

Wasserburg, G. J.↗

The Kramer Creek, Colorado meteorite - A new L4 chondrite

Results of bulk chemical analyses and mineralogical and petrographic studies of a chondrite found at Kramer Creek, Colorado, are reported. The meteorite has been classified as an L-group chondrite on the basis of its bulk chemistry, the fayalite content of its olivine (21.7%) and the ferrosilicate content of its pyroxene (18.3%). The presence of interstitial glass and the iron oxide percent mean deviations for olivine and low-Ca pyroxene (2.4 and 4.6%) place the specimen in petrologic group 4 of the Van Schmus and Wood classification (1967)

Gibson, E. K., Jr.↗

Are the stratospheric dust particles meteor ablation debris or interplanetary dust?

Natural and laboratory created fusion crusts and debris from artificial meteor samples were used to develop criteria for recognizing meteor ablation debris in a collection of 5 to 50 micron particles from the stratosphere. These laboratory studies indicate that meteor ablation debris from nickel-iron meteoroids produce spherules containing taenite, wuestite, magnetite, and hematite. These same studies also indicate that ablation debris from chondritic meteoroids produce spheres and fragmentary debris. The spheres may be either silicate rich, containing zoned olivine, magnetite, and glass, or sulfide rich, containing iron oxides (e.g., magnetite, wuestite) and iron sulfides (e.g., pyrrhotite, pentlandite). The fragmentary debris may be either fine-grained aggregates of olivine, magnetite, pyroxene, and occasionally pyrrhotite (derived from the meteorite matrix) or individual olivine and pyroxene grains (derived from meteorite inclusions).

Blanchard, M. B.↗