Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PROCESSING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

A Field Survey of Rare Earth Element Concentrations in Process Streams Produced by Coal Preparation Plants in the Eastern USA

I this work, a field study was undertaken to experimentally measure the concentrations of rare earth elements (REEs) contained in the process streams generated by a group of 20 coal preparation plants located in the eastern USA. For each site, representative samples of clean coal product, coarse refuse, and fine refuse were collected. Each sample was then partitioned into preselected size and density classes by wet screening/sieving and float-sink testing. The resultant products were dried and subjected to laboratory analyses to determine ash contents and rare earth element concentrations including Yttrium and Scandium. A detailed analysis of the database generated by this exercise showed that coal-based products from these preparation plants contained significant quantities of rare earth elements. In particular, the coarse refuse streams currently discarded by the 20 plants examined were found to contain a sufficient tonnage of REEs to satisfy the current domestic demand for these important elements. The data also showed a strong positive correlation between ash content and REE concentration, which suggested that the primary association of REEs in eastern USA bituminous coal sources is likely within fractions containing inorganic impurities. This association was well described using a simple power equation relating ash content and REE concentration. The ratio of heavy-to-light rare earth elements was discovered to be significantly higher in organically rich fractions of clean coal, suggesting that mineral impurities intimately associated with carbonaceous matter have elevated concentrations of heavy rare earth elements. A similar trend was observed for a grouping of rare earth elements (Y, Nd, Eu, Tb, and Dy) that are likely subject to near-term supply shortages. Finally, the database showed that a linear correlation existed between La for many REEs of interest, although there were several notable exceptions for some high-value REEs (Lu, Pr, and Tb).

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Fiber orientation and porosity in large-format extrusion process: The role of processing parameters

Controlling fiber orientation and porosity in short-fiber thermoplastic composites is important for enhancing mechanical, electrical and thermal properties in large-format additive manufacturing. This study employs a factorial design of experiments (DoE) to assess the effects of nozzle diameter (5.08 mm–10.16 mm), temperature (230–250 °C), and extruder screw speed (150–280 rpm) on flow rate, shear rate, porosity, fiber orientation, fiber length and tensile strength in 20 % carbon fiber-filled acrylonitrile butadiene styrene. ANOVA results show that screw speed significantly impacts flow rate, while nozzle diameter and temperature have lesser effects. Shear rate increases with smaller nozzles and higher speeds. Porosity decreases from 5.58 % with a 10.16 mm nozzle to 3.11 % with a 5.08 mm nozzle at 150 rpm due to increased shear rates, which induce shear thinning, reducing viscosity and facilitating gas escape. Larger nozzles (10.16 mm) produce larger, more heterogeneous pores, while smaller nozzles (5.08 mm) yield smaller, uniform pores. Beads produced with the 5.08 mm nozzle exhibit longer fiber lengths due to reduced residence time, lower shear stress, and better alignment. Fiber orientation improves with smaller nozzles due to higher shear rates but decreases with higher screw speeds (280 rpm) due to shorter residence times. The highest fiber alignment (A xx ∼ 0.65) and low porosity (∼3%) were achieved with a 5.08 mm nozzle at 150 rpm, while equivalent additive manufacturing-compression molding samples exhibited better tensile strength (∼93 MPa) under these conditions. In conclusion, these findings emphasize the importance of optimizing processing parameters to enhance fiber alignment and reduce porosity for improved mechanical performance.

Design of experiments↗
DOE OSTI2021

Distribution of rare earth elements in the pilot-scale processing of fly ashes derived from eastern Kentucky coals: Comparisons of the feed and processed ashes

Beneficiated fly ash from the combustion of Central Appalachian high volatile bituminous coals was extracted with HNO 3 in a pilot-scale processing plant. Several major oxides (notably CaO and SO 3 , but also including Fe 2 O 3 , MgO, K 2 O, and P 2 O 5 ) and minor elements (Mn, As, Sr, Ba, and Pb) are depleted in the post-HNO 3 -extraction spent ash. The total lanthanides, Y, and Sc concentration is reduced by about 20% in the spent ash, with Gd showing the greatest decrease. Along with Gd, Nd and Dy are also well differentiated between the feed and spent ashes, with La and Sm showing minimal partitioning. The Gd decrease is correlated with the depletion of Fe 2 O 3 . The heavy rare earth elements (REE heavier than Eu) and Y are disproportionately concentrated in the HNO 3 -leachate compared to the light REE. For the ashes studied, Sc did not partition between the feed and spent ashes. Pozzolanicity tests show that the compressive strength and strength activity indices of the spent ash + ordinary Portland cement (OPC) mixes are comparable to 100% OPC, indicating that the spent ashes produced in the pilot-scale runs have the potential to be sold as a Class F fly ash. Finally, the beneficiated ash chemistry influences the chemistry of the post-HNO 3 -extraction spent ash and the HNO 3 -leachate. A 500-ppm-REE fly ash will presumably be a more economically favorable feedstock than an ash with a significantly lesser concentration.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2019

Magnesium Alloy ZK60 Tubing made by Shear Assisted Processing and Extrusion (ShAPE)

ZK60 Magnesium tubing has been friction extruded from as-cast billets and T5 conditioned bars using Shear Assisted Processing and Extrusion (ShAPE). Tubes having an outer diameter of 50.8 mm and wall thickness of 1.9 mm were extruded with >20 times less ram force compared to conventional extrusion due to the unique shearing conditions and tooling inherent to ShAPE. Microstructures of the as-cast billet and T5 bar feedstock materials were significantly different from each other in terms of grain size, texture, and second phase distribution; yet the resulting microstructures after ShAPE were remarkably similar. An average grain size of 4-5 microns, 20o tilt of basal texture away from the extrusion axis, and refined second phases having a uniform distribution were achieved independent of the feedstock material. Hardness for as-extruded and artificially aged tubes are presented with isotropic behavior explained by detailed microstructural analysis. This work suggests that bulk ZK60 magnesium alloys extrusions may be fabricated in a single step, with microstructures that are unobtainable with conventional extrusion.

Friction Stir Extrusion, Friction Consolidation an↗
DOE OSTI2021

The effect of WAAM process parameters on process conditions and production metrics in the fabrication of single-pass multi-layer wall artifacts

The present work seeks to understand the impact of varying dwell time and input deposition power on part quality and overall production time for wire arc additive manufacturing. In this work, multi-layer wall geometries were deposited under different input power conditions without affecting the material deposition rate by setting traverse speed and wire feed speed constant and varying the contact tip-to-workpiece distance and the deposition power settings. Current and voltage data and optical imaging of the deposition zone were captured in situ, and wall geometry was characterized using laser scanning, so to understand the applicability of these methods for determining part height in situ. Furthermore, the present results demonstrate that alternating dwell times with lower input deposition power can result in significantly reduced overall production time and minimal material underbuilding, despite increased deposition geometry width. Furthermore, it is shown that while elimination of process dwell results in severe underbuilding of the deposition, it also yields the highest production rate for a hybrid-finished (e.g., deposited, machined) wall in terms of mm in build direction per minute and the highest buy-to-fly ratio.

36 MATERIALS SCIENCE↗