Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRESSURE RANGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

High pressure–low temperature phase diagram of barium: Simplicity versus complexity

Barium holds a distinctive position among all elements studied upon densification. Indeed, it was the first example shown to violate the long-standing notion that high compression of simple metals should preserve or yield close-packed structures. From modest pressure conditions at room temperature, barium transforms at higher pressures from its simple structures to the extraordinarily complex atomic arrangements of the incommensurate and self-hosting Ba-IV phases. By a detailed mapping of the pressure/temperature structures of barium, we demonstrate the existence of another crystalline arrangement of barium, Ba-VI, at low temperature and high pressure. The simple structure of Ba-VI is unlike that of complex Ba-IV, the phase encountered in a similar pressure range at room temperature. First-principles calculations predict Ba-VI to be stable at high pressure and superconductive. The results illustrate the complexity of the low temperature-high pressure phase diagram of barium and the significant effect of temperature on structural phase transformations.

36 MATERIALS SCIENCE↗

Features of the electron density dynamics in the filamentation of femtosecond laser radiation in air at elevated pressure

The electron density in the plasma channel of a femtosecond filament in air at pressures from 1 to 7 atm is measured at different instants, starting from the ionisation onset and up to several hundreds of picoseconds after it. The initial electron density is found to increase sharply in the pressure range of 3 – 4 atm. The plasma channel diameter is found to decrease with an increase in pressure from 3 to 7 atm. (extreme laser radiation: physics and fundamental applications)

74 ATOMIC AND MOLECULAR PHYSICS↗

Crystallographic Structure of Ti-6Al-4V, Ti-HP and Ti-CP Under High Pressure

The phase stability of a commercial purity (Ti-CP), high purity (Ti-HP) and Ti-6Al-4V alloy were investigated in a diamond anvil cell up to 32 GPa and 298 K using a polychromatic X-ray beam. The Ti-CP and Ti-HP shown the same HCP (c/a {approx} 0.632) to Hexagonal (c/a {approx} 1.63) non reversible martensitic transition at about 9 GPa. The as received Ti-6Al-4V shows a very low relative volume fraction {beta}-Ti/{alpha}-Ti. No phase changes were observed in the Ti-6Al-4V alloy in the pressure range of this study. The {alpha} phase of the Ti-6Al-4V shows monotonic volume cell pressure dependence. This volume change is reversible and non-hysteretic. The cell of the a phase recovered its original volume when the pressure was released.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Measuring Pressure Has a New Standard

The Force-Balanced Piston Gauge (FPG) tests and calibrates instrumentation operating in the low pressure range. The system provides a traceable, primary calibration standard for measuring pressures in the range of near 0 to 15 kPa (2.2 psi) in both gauge and absolute measurement modes. The hardware combines a large area piston-cylinder with a load cell measuring the force resulting from pressures across the piston. The mass of the piston can be tared out, allowing measurement to start from zero. A pressure higher than the measured pressure, which keeps the piston centered, lubricates an innovative conical gap located between the piston and the cylinder, eliminating the need for piston rotation. A pressure controller based on the control of low gas flow automates the pressure control. DHI markets the FPG as an automated primary standard for very low-gauge and absolute pressures. DHI is selling the FPG to high-end metrology laboratories on a case by case basis, with a full commercial release to follow.

Source record↗

Shock Tube and Modeling Study of the H + O2 = OH + O Reaction over a Wide Range of Composition, Pressure, and Temperature

The rate coefficient of the reaction H + 02 = OH + 0 was determined using OH laser absorption spectroscopy behind reflected shock waves over the temperature range 1050-2500 K and the pressure range 0.7-4.0 atm. Eight mixtures and three stoichiometries were used. Two distinct and independent criteria were employed in the evaluation of k(sub 1). Our recommended expression for k(sub 1) is k(sub 1) = 7.13 x 10(exp 13)exp(-6957 K/T) cm(exp 3)mol(exp -1)s(exp -1) with a statistical uncertainty of 6%. A critical review of recent evaluations of k(sub 1) yields a consensus expression given by k(sub 1) = 7.82 x 10(exp 13)exp(-7105 K/7) cm(exp 3)mol(exp -1)s(exp -1) over the temperature range 960-5300 K. We do not support a non-Arrhenius rate coefficient expression, nor do we find evidence of composition dependence upon the determination of k(sub 1).

Ryu, Si-Ok↗

Speed of Sound Measurements of Binary Mixtures of 1,1-Difluoroethylene (R-1132a) + Propane and Derived Speed of Sound of Pure R-1132a

Speed of sound data, measured using a dual-path pulse-echo instrument, are reported for three binary mixtures of 1,1-difluoroethylene (R-1132a) with propane at temperatures ranging from 230 to 345 K and pressures ranging from slightly above the bubble curve to a maximum pressure of 50 MPa. Significant attenuation of the pulse-echo signals was observed for measurements on pure R-1132a. Therefore, the R-1132a sample was doped with propane at mole fractions ranging from 0.0274 to 0.0887 and the propane + R-1132a mixture data was used to derive sound speeds for pure R-1132a. The data were compared to a preliminary equation of state for R-1132a, and deviations ranged from 2 % to 8 %. This demonstrates that the preliminary R-1132a EoS needs to be refit to better represent the speed of sound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Filling the vacuum chamber of a technological system with homogeneous plasma using a stationary glow discharge

Experimental study of a glow discharge with electrostatic confinement of electrons is carried out in the vacuum chamber volume V {approx} 0.12 m{sup 3} of a technological system 'Bulat-6' in argon pressure range 0.005-5 Pa. The chamber is used as a hollow cathode of the discharge with the inner surface area S {approx} 1.5 m{sup 2}. It is equipped with two feedthroughs, which make it possible to immerse in the discharge plasma interchangeable anodes with surface area S{sub a} ranging from {approx}0.001 to {approx}0.1 m{sup 2}, as well as floating electrodes isolated from both the chamber and the anode. Dependences of the cathode fall U{sub c} = 0.4-3 kV on the pressure p at a constant discharge current in the range I = 0.2-2 A proved that aperture of the electron escape out of the electrostatic trap is equal to the sum S{sub o} = S{sub a} + S{sub f} of the anode surface S{sub a} and the floating electrode surface S{sub f}. The sum S{sub o} defines the lower limit p{sub o} of the pressure range, in which U{sub c} is independent of p. At p < p{sub o} the cathode fall U{sub c} grows up dramatically, when the pressure decreases, and the pressure p tends to the limit p{sup ex}, which is in fact the discharge extinction pressure. At p {approx} p{sup ex} electrons emitted by the cathode and the first generation of fast electrons produced in the cathode sheath spend almost all their energy up to 3 keV on heating the anode and the floating electrode up to 600-800{sup o}C and higher. In this case the gas in the chamber is being ionized by the next generations of electrons produced in the cathode sheath, their energy being one order of magnitude lower. When S{sub a} < (2m/M){sup 1/2}S, where m is the electron mass and M is the ion mass, the anode may be additionally heated by plasma electrons accelerated by the anode fall of potential U{sub a} up to 0.5 kV.

74 ATOMIC AND MOLECULAR PHYSICS↗

High-resolution neutron time-of-flight measurements for light water at the Spallation Neutron Source (SNS), Oak Ridge National Laboratory

Series of light water inelastic neutron scattering experiments have been made at the Oak Ridge National Laboratory (ORNL), Spallation Neutron Source (SNS) covering temperatures ranging from 295 K to 600 K and pressures of 1 bar and 150 bar. The temperatures and pressures ranges correspond to that of pressurized light water reactors. The inelastic scattering measurements will help the development of light water thermal scattering kernels, also known as S (α,β) thermal scattering law (TSL), in a consistent fashion given the amount and the quality of the measured data. Light water thermal scattering evaluations available in existing nuclear data libraries have certain limitations and pitfalls. This paper introduces the state of the art of the light water thermal scattering cross-section data not only for room temperature but as well as for reactor operating temperatures, i.e. 550 - 600 K. During the past few years there has been a renewed interest in re-investigating the existing TSL models and utilize the recent experimental data or perform molecular dynamics simulations. It should be pointed out that no single TSL evaluation is based entirely on experimental data and one has to rely on TSL models or a combination of both. New TOF measurement of light water at the SNS, with a detailed description of the experimental setup, measurement conditions, and the associated foreseen results is presented in this paper. The analysis of the experimental data would help in validating the existing approach based on old experimental data or based on molecular dynamic simulations using classical water models, knowledge of which is very important to generate TSL libraries at reactor operating conditions.

Leal, Luiz C.↗

Pressure-induced phase transition on K{sub 2}MoO{sub 4}: A Raman scattering study and ab initio calculations

This work reports high pressure Raman scattering results on dipotassium molybdate (K{sub 2}MoO{sub 4}). The effects of hydrostatic pressure on the vibrational properties of K{sub 2}MoO{sub 4} has been investigated in the pressure range from 0.5 to 7.3 GPa. This study also indicates that K{sub 2}MoO{sub 4} crystals exhibit a pressure-induced first-order phase transition at about 2.2 GPa from monoclinic to an unknown symmetry. Calculaions based on density-functional theory (DFT) unveiled the structural changes undergone by the K{sub 2}MoO{sub 4} system under hydrostatic pressure. The phase transition is connected with the increase of the polyhedral KO{sub 6} distortion due to an increased anionic interaction as volume decrease, therefore leading to tiltings and/or rotations of the MoO{sub 4} tetrahedra. The consequence of such tiltings and/or rotations of the MoO{sub 4} tetrahedra is to increase the disorder of these units. The high-pressure phase transforms directly into the ambient-pressure phase as pressure is released. - Graphical Abstract: Dipotassium molybdate (K{sub 2}MoO{sub 4}) belongs to the class of single molybdates and tungstates with a general composition of the A{sub 2}MO{sub 4} (A=Li, Na, K, Rb, Cs; {Mu}=Mo, W). At room temperature and ambient pressure, the crystal of K{sub 2}MoO{sub 4} is monoclinic and it belongs to the C2/m (C{sub 2h}{sup 3}) space group. This material is attracting a considerable attention due to its interesting structural and thermodynamic properties. This work reports a high pressure study on this system. Highlights: Black-Right-Pointing-Pointer We reports high pressure Raman scattering results on dipotassium molybdate. Black-Right-Pointing-Pointer Our study indicates a pressure-induced first-order phase transition at around 2.16 GPa. Black-Right-Pointing-Pointer DFT calculations indicate that phase transition is connected with the increase of KO{sub 6} distortion. Black-Right-Pointing-Pointer Tiltings and/or rotations of the MoO{sub 4} tetrahedra are related to increased disorder.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Compression studies of TiB[subscript 2] using synchrotron x-ray diffraction

The compressibility of TiB{sub 2} has been determined separately by synchrotron x-ray diffraction and ultrasonic measurements on samples loaded in diamond-anvil cells and in multianvil high-pressure apparatus up to pressures of 65.9 GPa and 13.9 GPa, respectively, at ambient temperature. The high-pressure x-ray diffraction measurements, carried out on a pure polycrystalline sample, show a monotonic decrease of the lattice parameters with pressure, with the c/a ratio variation suggesting an increase in the structural rigidity along the c direction. No structural transition is observed even after laser heating of the sample up to 2200 K at 40 GPa, indicating a phase stability of TiB{sub 2} in this pressure range. The ultrasonic measurements of compressional V{sub p} and shear V{sub s} velocities on a cylindrical specimen show linear pressure dependencies. Using the third-order Eulerian finite strain equation to fit the pressure-volume x-ray data, we obtain an isothermal bulk modulus of K{sub To} = 232.9 {+-} 4.2 GPa and its pressure derivative K{sub To} = 3.86 {+-} 0.23. Similarly, the parameters derived from fitting the finite strain equation to the ultrasonic data give an adiabatic bulk modulus of K{sub So} = 232.9 {+-} 1.6 GPa and K'{sub So} = 3.02 {+-} 0.24, in good agreement with the x-ray diffraction measurements. The shear modulus and its pressure derivative derived from the ultrasonic measurements are G{sub So} = 259.8 {+-} 0.4 and G{sub So} = 2.52 {+-} 0.01, respectively.

43 PARTICLE ACCELERATORS↗

Pressure Induced Phase Transitions In SmVO{sub 4}: An In-Situ Raman Study

High pressure room temperature Raman investigation on SmVO{sub 4} was carried out up to 19 GPa. The ambient zircon phase was observed to remain stable up to 5.8 GPa. At higher pressure two structural phase transitions were observed at 6.8 GPa and 15.9 GPa respectively. The second phase transition was found to be reversible whereas the intermediate phase was retained on complete pressure release.

36 MATERIALS SCIENCE↗

Characterization of real gas properties for space shuttle main engine fuel turbine and performance calculations

Real thermodynamic and transport properties of hydrogen, steam, the SSME mixture, and air are developed. The SSME mixture properties are needed for the analysis of the space shuttle main engine fuel turbine. The mixture conditions for the gases, except air, are presented graphically over a temperature range from 800 to 1200 K, and a pressure range from 1 to 500 atm. Air properties are given over a temperature range of 320 to 500 K, which are within the bounds of the thermodynamics programs used, in order to provide mixture data which is more easily checked (than H2/H2O). The real gas property variation of the SSME mixture is quantified. Polynomial expressions, needed for future computer analysis, for viscosity, Prandtl number, and thermal conductivity are given for the H2/H2O SSME fuel turbine mixture at a pressure of 305 atm over a range of temperatures from 950 to 1140 K. These conditions are representative of the SSME turbine operation. Performance calculations are presented for the space shuttle main engine (SSME) fuel turbine. The calculations use the air equivalent concept. Progress towards obtaining the capability to evaluate the performance of the SSME fuel turbine, with the H2/H2O mixture, is described.

Harloff, G. J.↗

First-principles study of the structural and elastic properties of Cr{sub 2}AlX (X=N, C) compounds

The structural, electronic and elastic properties of Cr{sub 2}AlX, with X=N, C, have been investigated at the density functional theory level by applying a plane-wave pseudopotential approach. The band structure and density of states reveal the metallic features of Cr{sub 2}AlX. The total and projected density of states indicate that the bonding is achieved through a hybridization of Cr 3d states with Al and X-atom p states. The Cr 3d-X2p bonds are lower in energy and are stiffer than Cr 3d-Al 3p bonds. The charge density distributions indicate that there exist soft Cr-Al and relatively strong Cr-X covalent bonds, which might be responsible for their hardness. The elastic constants were obtained in the pressure range 0-100 GPa, and satisfy the stability conditions for hexagonal crystal, which indicates that these two compounds are stable in the pressure regime studied. By analyzing bulk modulus to shear modulus ratio and Cauchy pressure, Cr{sub 2}AlC is predicted to be brittleness and Cr{sub 2}AlN is ductile. The Debye temperature was obtained from the average sound velocity. - Graphical abstract: The heterogeneity of chemical bonds in Cr{sub 2}AlX (X=N, C) is observed: soft Cr-Al and relatively strong Cr-X covalent bonds might be contributed to their hardness. Highlights: Black-Right-Pointing-Pointer Cr 3d-X2p (X=N, C) bonds are lower in energy and stiffer than Cr 3d-Al 3p bonds for Cr{sub 2}AlX. Black-Right-Pointing-Pointer The hardness of Cr{sub 2}AlX might be ascribed to soft Cr-Al and relatively strong Cr-X covalent bonds. Black-Right-Pointing-Pointer The predicted brittleness of Cr{sub 2}AlC and ductility of Cr{sub 2}AlN originated from their novel structure.

36 MATERIALS SCIENCE↗

Local supply of gas in vacuum: Application to a field ion source

The flow of hydrogen, helium, and nitrogen through a millimeter long and micrometer size annulus capillary from a high pressure chamber to a low pressure chamber is measured in a wide pressure range. The corresponding gas conductance is deduced. Molecular, transition, and viscous regimes are observed. The local supply of gas strongly increases with pressure in the viscous regime up to a regime controlled by capillary exit loss. Based on such a geometry, the gas supply to a field ion source with a coaxial structure is shown to be increased by more than three orders of magnitude compared to a conventional supply.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Radical–Radical Reactions in Molecular Weight Growth: The Phenyl + Propargyl Reaction

The mechanism for hydrocarbon ring growth in sooting environments is still the subject of considerable debate. The reaction of phenyl radical (C 6 H 5 ) with propargyl radical (H 2 CCCH) provides an important prototype for radical–radical ring-growth pathways. We studied this reaction experimentally over the temperature range of 300–1000 K and pressure range of 4–10 Torr using time-resolved multiplexed photoionization mass spectrometry. We detect both the C 9 H 8 and C 9 H 7 + H product channels and report experimental isomer-resolved product branching fractions for the C 9 H 8 product. We compare these experiments to theoretical kinetics predictions from a recently published study augmented by new calculations. Here, these ab initio transition state theory-based master equation calculations employ high-quality potential energy surfaces, conventional transition state theory for the tight transition states, and direct CASPT2-based variable reaction coordinate transition state theory (VRC-TST) for the barrierless channels. At 300 K only the direct adducts from radical–radical addition are observed, with good agreement between experimental and theoretical branching fractions, supporting the VRC-TST calculations of the barrierless entrance channel. As the temperature is increased to 1000 K we observe two additional isomers, including indene, a two-ring polycyclic aromatic hydrocarbon, and a small amount of bimolecular products C 9 H 7 + H. Our calculated branching fractions for the phenyl + propargyl reaction predict significantly less indene than observed experimentally. We present further calculations and experimental evidence that the most likely cause of this discrepancy is the contribution of H atom reactions, both H + indenyl (C 9 H 7 ) recombination to indene and H-assisted isomerization that converts less stable C 9 H 8 isomers into indene. Especially at low pressures typical of laboratory investigations, H-atom-assisted isomerization needs to be considered. Regardless, the experimental observation of indene demonstrates that the title reaction leads, either directly or indirectly, to the formation of the second ring in polycyclic aromatic hydrocarbons.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Pressure Effects on the Relaxation of an Excited Ethane Molecule in High-Pressure Bath Gases

Here, we use molecular dynamics to calculate the rotational and vibrational energy relaxation of C 2 H 6 in Ar, Kr, and Xe bath gases over a pressure range of 10 to 400 atm and at temperatures of 300 K and 800 K. The C 2 H 6 is instantaneously excited by 80 kcal/mol randomly distributed into both vibrational and rotational modes. The computed relaxation rates show little sensitivity to the identity of the noble gas in the bath. Vibrational relaxation rates show a non-linear pressure dependence at 300 K. At 800 K the reduced range of bath gas densities covered by the range of pressures do not yet show any non-linearity in the pressure dependence. Rotational relaxation is characterized with two relaxation rates. The slower rate is comparable to the vibrational relaxation rate. The faster rate has a linear pressure dependence at 300 K but an irregular, nonlinear pressure dependence at 800 K. To understand this, a model was developed based on approximating the periodic box used in the molecular dynamics simulations by an equal-volume collection of cubes where each cube is sized to allow only single occupancy by the noble gas or the molecule. Combinatorial statistics then leads to a pressure and temperature dependent analytic distribution of the bath gas species the molecule encounters in a collision. This distribution, the dissociation energy of molecule/bath gas complexes and bath gas clusters, and the computed energy release per collision combine to show that only at 300 K is the energy release sufficient to dissociate likely complexes and clusters. This suggests that persistent and pressure-dependent clusters and complexes at 800 K may be responsible for the non-linear pressure dependence of rotational relaxation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Lab and Reservoir Study of Produced Hydrocarbon Molecular Weight Selectivity during CO 2 Enhanced Oil Recovery

Two laboratory experiments were performed to investigate the molecular weight selectivity of crude oil hydrocarbons mobilized into CO 2 at the reservoir temperature (42 °C) and pressures ranging from below the minimum miscibility pressure (MMP) of 9.69 MPa (1406 psi) to pressures well above the MMP (8.27–27.58 MPa, 1200–4000 psi). The hydrocarbon composition at equilibrium in the CO 2 -rich upper “miscible” phase was measured, as was the ability of four pore volumes of CO 2 to recover crude oil hydrocarbons from a sand bed. Both experiments showed significant selectivity against producing higher molecular weight hydrocarbons at lower pressures. In addition, the bias against higher molecular weight hydrocarbons continued even at pressures well above the 9.69 MPa MMP. For example, both the total hydrocarbon concentration in the CO 2 -rich “miscible” phase and the fraction of C 21 –C 36 increased dramatically from 10.34 to 21.13 MPa (from 1500 to 3500 psi), even though both pressures were above the MMP. In addition, when crude oil was first equilibrated at 20.68 MPa (3000 psi) and then lowered before sampling the “miscible” phase, substantial deposition of the higher molecular weight hydrocarbons occurred with the result that the hydrocarbon composition and concentrations were similar to those when the crude oil was exposed to only the lower CO 2 pressures without first being exposed to any higher pressure. The sand flush experiments showed similar results to the “miscible” phase samplings in that both the total hydrocarbons and the fraction of C 21 –C 36 recovered increased dramatically with pressure, regardless of whether the pressures were below or more than double the MMP. The crude oil samples remaining after CO 2 exposures also showed large increases in molecular weight as well as higher viscosity and lower American Petroleum Institute (API) gravity than the original crude oil. As predicted by both lab experiments, produced crude oil samples collected from two wells before and after CO 2 breakthrough showed significant bias against high-molecular-weight hydrocarbons, with the fraction of C 21 –C 36 produced dropping by as much as 60–80% after CO 2 breakthrough compared to crude oil samples collected from the same wells before CO 2 breakthrough. Furthermore, these results verify that crude oil during a CO 2 flood does not move as a homogeneous “miscible” phase and that hydrocarbon dissolution (vaporization into the “miscible” phase) of lower molecular weight hydrocarbons dominates oil recovery in both the field and lab experiments.

02 PETROLEUM↗

Pressure-Dependent Magnetic Properties of Quasi-2D Cr 2 Si 2 Te 6 and Mn 3 Si 2 Te 6

Recently, pressure has been used to induce structural and magnetic phase transitions in many layered quantum materials whose layers are linked by van der Waals forces. Materials with such weakly held layers allow for relatively easy manipulation of the superexchange mechanism, which can give rise to novel magnetic behavior. Here, using hydrostatic pressure as a disorderless means to manipulate the interlayer coupling, we applied pressure on two quasi-2D sister compounds, namely, Cr 2 Si 2 Te 6 (CST) and Mn 3 Si 2 Te 6 (MST), up to ~1 GPa. Magnetic property measurements with the application of pressure revealed that the ferromagnetic transition temperature decreases in CST, while the opposite occurs for the ferrimagnetic MST. In MST, magnetization decreases with the increase in pressure, and such a trend is not clearly observed within the pressure range studied for CST. The overall pressure effect on magnetic characteristics such as exchange couplings and magnetic anisotropy energies is also examined theoretically using density functional theory. Exchange coupling in MST is strongly frustrated, and the first nearest neighbor interaction is the most dominant of the components with the strongest pressure dependence. In CST, the exchange coupling parameters exhibit very little dependence on pressure. This combined experimental and theoretical work has the potential to expand to other relevant quantum materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗