Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POLLUTION CONTROL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

How can environmental regulations promote clean coal technology adoption in APEC developing economies?

The study examines both existing and emerging regulatory frameworks in order to determine which type of regulations that would be most effective at promoting clean coal technology adoption in development Asia Pacific Economic Co-operation (APEC) economies and would be practical to implement. regulations targeting air emissions; regulations targeting water use; and regulations concerning coal combustion by-products. When considering the potential effect of existing and new environmental regulations on the adoption of clean coal the analysis of technologies was organised into three categories: environmental control technologies; high efficiency coal combustion technologies; and carbon dioxide capture and storage (CCS). To target the recommendations towards APEC economies that would benefit the most from this analysis, the study focused on developing and transition APEC economies that are expected to rely on coal for a large part of their future generating capacity. These economies include China, Indonesia, the Philippines, the Russian Federation, Thailand, and Vietnam. ACARP provided funding to this study, under Project C15078. 10 figs., 14 tabs., 10 apps.

20 FOSSIL-FUELED POWER PLANTS↗

Energy and environment legislative digest 2008

This Digest (published every year) is a compilation of energy and environmental legislation enacted by the Southern States Energy Board's 18 member states and territories during the 2008 legislative session.

01 COAL, LIGNITE, AND PEAT↗

Controllability analysis and decentralized control of a wet limestone flue gas desulfurization plant

Presently, decentralized feedback control is the only control strategy used in wet limestone flue gas desulfurization (WLFGD) plants. Proper tuning of this control strategy is becoming an important issue in WLFGD plants because more stringent SO{sub 2} regulations have come into force recently. Controllability analysis is a highly valuable tool for proper design of control systems, but it has not been applied to WLFGD plants so far. In this paper a decentralized control strategy is designed and applied to a WLFGD pilot plant taking into account the conclusions of a controllability analysis. The results reveal that good SO{sub 2} control in WLFGD plants can be achieved mainly because the main disturbance of the process is well-aligned with the plant and interactions between control loops are beneficial to SO{sub 2} control.

01 COAL, LIGNITE, AND PEAT↗

Model predictive control of a wet limestone flue gas desulfurization pilot plant

A model predictive control (MPC) strategy based on a dynamic matrix (DMC) is designed and applied to a wet limestone flue gas desulfurization (WLFGD) pilot plant to evaluate what enhancement in control performance can be achieved with respect to a conventional decentralized feedback control strategy. The results reveal that MPC can significantly improve both reference tracking and disturbance rejection. For disturbance rejection, the main control objective in WLFGD plants, selection of tuning parameters and sample time, is of paramount importance due to the fast effect of the main disturbance (inlet SO{sub 2} load to the absorber) on the most important controlled variable (outlet flue gas SO{sub 2} concentration). The proposed MPC strategy can be easily applied to full-scale WLFGD plants.

01 COAL, LIGNITE, AND PEAT↗

National Level Co-Control Study of the Targets for Energy Intensity and Sulfur Dioxide in China

Since 2006, China has set goals of reducing energy intensity, emissions, and pollutants in multiple guidelines and in the Five Year Plans. Various strategies and measures have then been taken to improve the energy efficiency in all sectors and to reduce pollutants. Since controlling energy, CO 2 emissions, and pollutants falls under the jurisdiction of different government agencies in China, many strategies are being implemented to fulfill only one of these objectives. Co-controls or integrated measures could simultaneously reduce greenhouse gas (GHG) emissions and criteria air pollutant emissions. The targets could be met in a more cost effective manner if the integrated measures can be identified and prioritized. This report provides analysis and insights regarding how these targets could be met via co-control measures focusing on both CO 2 and SO 2 emissions in the cement, iron &steel, and power sectors to 2030 in China.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Response of SO2 and Particulate Air Pollution to Local and Regional Emission Controls: A Case Study in Maryland

This paper addresses the questions of what effect local regulations can have on pollutants with different lifetimes and how surface observations and remotely sensed data can be used to determine the impacts. We investigated the decadal trends of tropospheric sulfur dioxide (SO2) and aerosol pollution over Maryland and its surrounding states, using surface, aircraft, and satellite measurements. Aircraft measurements indicated fewer isolated SO2 plumes observed in summers, a 40 decrease of column SO2, and a 20 decrease of atmospheric optical depth (AOD) over Maryland after the implementation of local regulations on sulfur emissions from power plants (90 reduction from 2010). Surface observations of SO2 and particulate matter (PM) concentrations in Maryland show similar trends. OMI SO2 and MODIS AOD observations were used to investigate the column contents of air pollutants over the eastern U.S.; these indicate decreasing trends in column SO2 (60 decrease) and AOD (20 decrease). The decrease of upwind SO2 emissions also reduced aerosol loadings over the downwind Atlantic Ocean near the coast by 20, while indiscernible changes of the SO2 column were observed. A step change of SO2 emissions in Maryland starting in 20092010 had an immediate and profound benefit in terms of local surface SO2 concentrations but a modest impact on aerosol pollution, indicating that short-lived pollutants are effectively controlled locally, while long-lived pollutants require regional measures.

satellite measurements↗

Pollution Measuring System

Research Ventures, Inc.'s visiplume is a portable, microprocessor-controlled air pollution monitor for measuring sulfur dioxide emissions from fossil fuel-fired power plants, and facilities that manufacture sulfuric acid. It observes smokestack plumes at a distance from the stack obviating the expense and difficulty of installing sample collectors in each stack and later analyzing the samples.

Source record↗

Two-Stage Combustor Reduces Pollutant Emissions

By controlling fuel-to-air ratio of local reactants, pollutant emissions would be minimized in a proposed two-stage combustor for gas-turbine engines. It would use fuel-rich partial-oxidation stage and air-rich combustion stage to reduce emissions of nitrogen oxide, carbon monoxide and hydrocarbons. Combustor fuel-lean burning limit would be extended simultaneously.

Clayton, R. M.↗

Supercritical CO 2 Cycles for Power Production

Conference presentation at Energy, Utility & Environment Conference (EUEC), San Diego, California, February 8–10, 2017. This presentation reviews the Allam Cycle principles and also the challenges and opportunities of producing power with the Allam Cycle using North Dakota lignite. Points of emphasis include corrosion analysis, efficient removal of impurities from the syngas, gasifier integration, and design considerations for a high-pressure oxy-fired syngas combustor.

01 COAL, LIGNITE, AND PEAT↗

Supercritical CO 2 Cycles for Power Production Development

Conference presentation at 42nd International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida, June 11–15, 2017. This presentation reviews the Allam Cycle principles and also the challenges and opportunities of producing power with the Allam Cycle using North Dakota lignite. Points of emphasis include corrosion analysis, efficient removal of impurities from the syngas, gasifier integration, and design considerations for a high-pressure oxy-fired syngas combustor.

01 COAL, LIGNITE, AND PEAT↗

Design of a Coal-Based Allam Cycle Large Pilot Plant

Conference presentation at 44th International Technical Conference on Clean Energy (Clearwater Clean Energy Conference), Clearwater, Florida, June 16–21, 2019. This presentation describes a proposed pilot project to demonstrate a coal-based Allam Cycle power system, which uses supercritical CO₂ to generate electricity with high efficiency and near-zero emissions. It outlines the technology concept, pilot plant scale, potential sites, costs, and next steps toward detailed design and construction.

01 COAL, LIGNITE, AND PEAT↗

Dynamic Corrosion Testing of Alloys for Supercritical CO 2 Cycles

Conference presentation at 2017 International Pittsburgh Coal Conference, Pittsburgh, Pennsylvania, September 5–8, 2017. This presentation addresses bench-scale testing of potential metal alloys and their corrosion potential in a supercritical CO 2 cycle. To enable this assessment a dynamic corrosion system capable of simultaneous testing of six alloy types was developed. Two alloys, Inconel C-276 and 316 stainless steel, were used for this testing. Results of their behavior and resistance to selective acid condensation will be discussed.

01 COAL, LIGNITE, AND PEAT↗

Supercritical CO 2 Cycles for Power Production

Conference presentation at 8th International Freiberg Conference, Cologne, Germany, June 12–16, 2016. This presentation reviews the Allam Cycle principles and also the challenges and opportunities of producing power with the Allam Cycle using North Dakota lignite. Points of emphasis include corrosion analysis, efficient removal of impurities from the syngas, gasifier integration, and design considerations for a high-pressure oxy-fired syngas combustor.

01 COAL, LIGNITE, AND PEAT↗

Transition in source contributions of PM2.5 exposure and associated premature mortality in China during 2005–2015

The serious fine particle (PM2.5) pollution in China causes millions of premature deaths. Driven by swift eco-nomic growth and stringent control policies, air pollutant emissions in China have changed signi?cantly in the last decade, but the change in the source contribution of PM2.5-related health impacts remains unclear. In this study, we develop a multi-pollutant emission inventory in China for 2005–2015, and combine chemical transport modeling, ambient/household exposure evaluation and health impact assessment to quantify the contribution of eight emission sectors to PM2.5 exposure and associated health risk. From 2005 to 2015, the mortality due to PM2.5 from ambient air pollution (AAP) decreases from 1.04 (95% con?dence interval, 0.84–1.25) million to 0.87 (0.70–1.04) million. The agricultural sector contributes 25% and 32% to ambient PM2.5-attributed mor-tality in 2005 and 2015, respectively, representing the largest contributor during this period. The contribution of power plants drops monotonously from 13% to 6%. The percentage contribution of industrial process drops signi?cantly while the contribution of industrial combustion stays the same level. The overall contribution of industry is still as large as 26% in 2015 in spite of strict control measures. For transportation, despite strict emission standards, its contribution increases remarkably due to the rapid growth of vehicle population. When both ambient and household PM2.5 exposures are taken into account, the mortality due to integrated population-weighted exposure to PM2.5 (IPWE) drops from 1.78 (1.46–2.09) million in 2005 to 1.28 (1.05–1.52) million in 2015. Most of the IPWE reduction comes from domestic combustion as a result of urbanization and improved income, whereas this sector remains the largest contributor (58%) to IPWE-related health risk in 2015. Our results suggest that the government should dynamically adjust the air pollution control strategy according to the change in source contributions. Domestic combustion and agriculture should be prioritized considering their predominant contributions to mortality and the lack of e?ective control policies. More stringent control mea-sures for industry and transportation are necessary since the existing policies have not adequately reduced their health impacts. Electricity production is no longer the top priority of air pollution control policies given its lower health impact compared with that of other sources.

Zheng, Haotian↗

Dust control for draglines

Monitoring dust levels inside draglines reveals room for improvement in how filtration systems are used and maintained. The Australian firm BMT conducted a field test program to measure airflow parameters, dust fallout rates and dust concentrations, inside and outside the machine house, on four draglines and one shovel. The study involved computational fluid dynamics (CFD) simulations. The article describes how the tests were made and gives results. It was not possible to say which of the two main filtration systems currently used on Australian draglines - Dynavane or Floseps - performs better. It would appear that more frequent maintenance and cleaning would increase the overall filtration performance and systems could be susceptible to repeat clogging in a short time. 2 figs., 1 photos.

01 COAL, LIGNITE, AND PEAT↗

JV Task-Long-Kiln NOx Reduction Study

Field sampling was conducted by the Energy & Environmental Research Center at two Lafarge North America cement kiln locations in Canada. Emissions including SO{sub x}, NO{sub x}, and particulate were measured and reported at various locations throughout the kilns. At each site data were collected on two kilns during field sampling. However, only Kiln 1 at the Ravena site was utilized for modeling efforts. Experimental work was then conducted to estimate the effectiveness of various NO{sub x} control techniques on limiting both NO{sub x} and SO{sub x} emissions in cement kiln exhaust. Theory-based models were constructed to estimate both NO{sub x} and SO{sub x} emissions from cement kilns. These models were then applied to estimating the impact of various NO{sub x} control strategies on kiln exhaust emissions. The sulfur model constructed as part of this work was successful at predicting SO{sub 2} emissions and sulfur capture in the Alpena kiln. This model is designed to run as a postprocessing step that uses the output of a NO{sub x} model as input. With an accurate NO{sub x} model, the sulfur model may prove to be a valuable tool in estimating the impact of kiln modifications on sulfur emissions. The NO{sub x} model was also applied to model several operating scenarios on three of Lafarge's kilns: Alpena 20/21, Alpena 22/23, and Ravena 1. The predictions of the flue gas temperature at the kiln feed end, the kiln shell heat loss, the quality of clinker, and the excess O{sub 2} in the flue gas are consistent with the audit data. The developed simulation tool in this project has proven to be an effective way to investigate the NO{sub x} emissions, to optimize kiln performance, and to assess changes in operating condition on kiln performance.

54 ENVIRONMENTAL SCIENCES↗

Developing Highly Sensitive Micro-Biosensors for in-situ Monitoring Mercury and Chromium(IV) Contaminants by Genetically-evolving and Computer-designing Metal-binding Proteins

Mercury has been well known as an environmental pollutant to the environment and to cause serious effects on human health for several decades. To effectively control mercury pollution and reduce mercury damages, the sensitive determination of mercury is essential. Currently, many different types of sensor-based assays have been developed, while the whole-cell biosensor has been gaining increasingly attentions due to its easy reproducibility and the possibility to greatly reduce the cost. However, significant improvements on the specificity, sensitivity, stability and simplicity of the whole-cell biosensor are still needed prior to its eventual commercialization. Sponsored by US Department of Energy under the contract agreement DE-FG02-07ER64410, we applied the special synthetic biology and directed evolution strategies to improve the effectiveness and performance of whole-cell biosensors. We have constructed different whole-cell biosensors for the mercuric ion and methylmercury detection with metalloregulator MerR, fluorescent protein mCherry and organomercurial lyase MerB. By introducing the mercuric transporter MerT, we were able to increase the detection sensitivity of whole-cell biosensors by at least one fold. By introducing the bio-amplification genetic circuit based on the gene cascade expression system of $P_{RM-}cI$ from bacteriophage λ and Pm-XylS2 from Pseudomonas putida, we have increased the detection sensitivity of whole-cell biosensors by 1~2 folds in our tested conditions. With the directed evolution of MerR and subsequent high-throughput screening via color assay and microplate screening, we have dramatically increased the detection sensitivity by up to 10 folds at low concentration of mercury (II) of 1-10nM. Structural modeling and computational analysis of the mutated MerR showed that many mutations could cause the change of a loop to helix, which could be responsible for the increased mercury sensitivity.

02 PETROLEUM↗