Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHASE ANGLE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

The coherent backscattering opposition effect

We have measured the opposition effect, the nonlinear surge in reflectance seen in particulate materials as phase angle approaches zero degrees, in a suite of materials of varying particle size and reflectance. These samples were illuminated by linearly and circularly polarized monochromatic radiation at two wavelengths, 0.442 and 0.633 microns. By measuring the linear and circular polarization ratios for each sample, we have found that in highly reflective materials the behavior of the reflected radiation is consistent with the coherent backscattering process which has recently been proposed to explain the opposition surge that is seen in such media. The size and width of the coherent backscattering opposition peak vary as a function of reflectance of the sample. The opposition effect has been observed in particulate materials studied in the laboratory and it is also observed in the radiation reflected from solar system bodies which present a regolith to the earth based observer. The traditional explanation of the opposition effect, the shadow-hiding hypothesis, is that it was caused by the elimination of mutual shadows cast between the regolith grains as the phase angle of the observation became smaller. This shadow-hiding hypothesis, however, is unable to explain the opposition effect seen in highly reflective materials such as magnesium oxide and barium sulfate powders. This is because highly reflective media will multiply scatter the incident radiation between the regolith grains. This causes the shadows to be eliminated. We have measured the angular scattering properties of a suite of materials of different reflectivity. We have observed polarization ratios in reflective particulates that are consistent with coherent backscattering as the principal process which causes the opposition surge.

Nelson, R. M.↗

Aeroelastic Calculations of Quiet High- Speed Fan Performed

An advanced high-speed fan was recently designed under a cooperative effort between the NASA Glenn Research Center and Honeywell Engines & Systems. The principal design goals were to improve performance and to reduce fan noise at takeoff. Scale models of the Quiet High-Speed Fan were tested for operability, performance, and acoustics. During testing, the fan showed significantly improved noise characteristics, but a self-excited aeroelastic vibration known as flutter was encountered in the operating range. Flutter calculations were carried out for the Quiet High-Speed Fan using a three-dimensional, unsteady aerodynamic, Reynolds-averaged Navier-Stokes turbomachinery code named "TURBO." The TURBO code can accurately model the viscous flow effects that can play an important role in various aeroelastic problems such as flutter with flow separation, flutter at high loading conditions near the stall line (stall flutter), and flutter in the presence of shock and boundary-layer interaction. Initially, calculations were performed with no blade vibrations. These calculations were at a constant rotational speed and a varying mass flow rate. The mass flow rate was varied by changing the backpressure at the exit boundary of the computational domain. These initial steady calculations were followed by aeroelastic calculations in which the blades were prescribed to vibrate harmonically in a natural mode, at a natural frequency, and with a fixed interblade phase angle between adjacent blades. The AE-prep preprocessor was used to interpolate the in-vacuum mode shapes from the structural dynamics mesh onto the computational fluid dynamics mesh and to smoothly propagate the grid deformations from the blade surface to the interior points of the grid. The aeroelastic calculations provided the unsteady aerodynamic forces on the blade surface due to blade vibrations. These forces were vector multiplied with the structural dynamic mode shape to calculate the work done on the blade during one vibration period, then this result was converted to an aerodynamic damping. Flutter occurs when the aerodynamic damping becomes negative, if structural damping is ignored. The results of these aeroelastic calculations are summarized in this plot of aerodynamic damping versus mass flow rate at a constant rotational speed. As the backpressure is increased, the mass flow rate through the fan decreases and the fan operating point moves towards the stall line. The aeroelastic calculations showed that the aerodynamic damping decreases as the stall line is approached, as observed during testing. In addition, the aeroelastic calculations with the TURBO code correctly predicted the aeroelastic parameters: the most unstable vibration mode and interblade phase angle, as observed during testing. The Quiet High-Speed Fan demonstrated significant noise reductions during testing, but flutter imposed limits on its operating range. The accurate calculation of the aeroelastic characteristics using the TURBO code is a significant step toward eliminating flutter from the operating range and toward realizing the benefits of reduced fan noise. The aeroelastic calculations described here were performed under a grant by University of Toledo researchers in collaboration with Glenn's researchers.

Bakhle, Milind A.↗

Latitudinal and energy dependence of energetic neutral atom spectral indices measured by the Interstellar Boundary Explorer

We investigate the latitudinal and energy dependence of the globally distributed 0.5–6 keV energetic neutral atom (ENA) spectra measured by the Interstellar Boundary Explorer (IBEX) during the first 3 yrs of the mission. Our results are: (1) the ENA spectral indices at the two lowest energies (0.89 and 1.47 keV) exhibit no clear trend with ecliptic latitude θ, while those at ∼2.29 and ∼3.41 keV exhibit a clear latitudinal pattern; flatter spectra occur above 60° latitude and steeper spectra occur ±30° of the equator. (2) The latitudinal dependence of the spectral indices at different energies can be represented by the cosine function γ=a{sub 0}+a{sub 1}cos(a{sub 2}θ) with unique offsets, amplitudes, and phase angles; the higher energy ENA indices transition to successively larger amplitudes within ±45° of the equator. Our results confirm the previously reported latitudinal organization of the ENA spectra and their remarkable similarity to that of the solar wind (SW) speed observed by Ulysses in the inner heliosphere. While earlier studies showed that the ∼0.5–6 keV globally distributed ENA spectral indices could be represented as single power laws over much of the sky, our new results indicate that this is an over-simplification because the spectral indices have an energy and latitude dependence. This dependence is an important factor that must be taken into consideration by models and simulations that seek to map the IBEX ENA observations back to the latitudinal profile of the SW speed structure observed in the inner heliosphere.

79 ASTRONOMY AND ASTROPHYSICS↗

Non-contact electrochemical evaluation of biofilms

Abstract Here, we demonstrate a non-contact technique for electrochemical evaluation of biofilms on surfaces in relation to corrosion. Electrochemical impedance spectrometry was employed, incorporating flat patterned electrodes positioned over the surfaces of aluminum and glass with and without biofilms. Signal communication from the working electrode to the counter electrode followed electric field lines passing tangentially through the biofilms. Electrochemical impedance parameters that were evaluated included complex impedance, phase angle, imaginary (out of phase) conductivity and Cole–Cole plots with a corresponding equivalent circuit. Changes in the impedance properties due to the presence of biofilms were monitored and correlated through microbiological, chemical and electrochemical assays. Impedance parameters associated with microbial activity correlated with biofilms on aluminum and glass surfaces. This technical approach provides impedance information about the biofilm without the signal traveling through the underlying conductive media or disrupting the biofilm. In this way, biological contributions to surface fouling can be evaluated with minimal contribution from the inorganic surface under the biofilm. In addition, this technique can be used to monitor biofilms on electrochemically inert surfaces as well as electrically conductive surfaces. Graphic abstract

Turick, Charles E. (ORCID:0000000307815846)↗

Time and Phase Resolved Optical Spectra of Potentially Hazardous Asteroid 2014 JO25

The asteroid 2014 JO25, considered to be potentially hazardous by the Minor Planet Center, was spectroscopically followed during its close-Earth encounter on 2017 April 19 and 20. The spectra of the asteroid were taken with the low-resolution spectrograph (LISA), mounted on the 1.2 m telescope at the Mount Abu Infrared Observatory, India. Coming from a region close to the Hungaria population of asteroids, this asteroid follows a comet-like orbit with a relatively high inclination and large eccentricity. Hence, we carried out optical spectroscopic observations of the asteroid to look for comet-like molecular emissions or outbursts. However, the asteroid showed a featureless spectrum, devoid of any comet-like features. The light curve of the asteroid was analyzed using V-band magnitudes derived from the spectra and the most likely solution for the rotation of the asteroid was obtained. The absolute magnitude H and the slope parameter G were determined for the asteroid in the V filter band using the IAU accepted standard two-parameter H–G model. A peculiar, rarely found result from these observations is its phase bluing trend. The relative B–V color index seems to decrease with increasing phase angle, which indicates a phase bluing trend. Such trends have seldom been reported in the literature. However, phase reddening in asteroids is very common. The asymmetry parameter g and the single-scattering albedo w were estimated for the asteroid by fitting the Hapke phase function to the observed data. The asteroid shows a relatively large value for the single-scattering albedo and a highly back-scattering surface.

79 ASTRONOMY AND ASTROPHYSICS↗

A note on correlation description

The paper suggests some modifications to definitions of correlation functions made by Freeman and Bennett (1974) specifically for comparing measured quantities with those predicted by rotor theories, with reference to rotorcraft flight simulation. Special attention is paid to the quality of correlation, determined by a quality factor relating the measured and computed entities. Correlation criteria (mean load and rotor performance, overall amplitude and phase, harmonic altitude and harmonic phase) are examined, along with phase angle correlation criteria (harmonic phase defined by sine-cosine relation and harmonic phase defined by a first positive peak rotor azimuth position)

Mccloud, J. L., III↗

The effect of finite geometry on the three-dimensional transfer of solar irradiance in clouds

Results are presented for a Monte Carlo model applied to a wide range of cloud widths and heights, and for an analytical model restricted in its application to cuboidally shaped clouds whose length, breadth, and depth may be varied independently; the clouds must be internally homogeneous with respect to their intrinsic radiative properties. Comparative results from the Monte Carlo method and the derived analytical model are presented for a wide range of cloud sizes, with special emphasis on the effects of varying the single scatter albedo, the solar zenith angle, and the scattering phase angle.

Davies, R.↗

Speed control for synchronous motors

Feedback circuit controls fluctuations in speed of synchronous ac motor. Voltage proportional to phase angle is developed by phase detector, rectified, amplified, compared to threshold, and reapplied positively or negatively to motor excitation circuit. Speed control reduces wow and flutter of audio turntables and tape recorders, and enhances hunting in gyroscope motors.

Packard, H.↗

Voyager 2 photopolarimeter observations of Titan

Observations of Titan's whole-disk polarization at 2460 and 7500 A are presented and analyzed in terms of model scattering atmospheres. If the Titan aerosols are spherical or nearly spherical, no single combination of refractive index and size distribution is able to fit data at both wavelengths. However, a vertically inhomogeneous distribution suggested by Tomasko and Smith (1980), characterized by a size gradient with altitude, fits the data at 2640 A moderately well but must be modified at intermediate and large optical depths to fit the 7500-A data. Results for synthetic phase functions indicate that the single-scattering polarization must be 70 percent or larger in the UV and 78 percent or larger in the near-IR at 90-deg phase angle, depending on the phase function. If the correct phase function is similar to that for 0.5-micron-radius spheres, the UV single-scattered polarization must be 84 percent and the near-IR single-scattered polarization must be over 90 percent. Such large polarizations are impossible for 0.5-micron-radius spheres but may be possible for nonspherical particles with effective radii near 0.5 micron, although the existence of nonspherical particles with the scattering properties required by these and other observations has not been demonstrated.

West, R. A.↗

Amalthea - Voyager imaging results

Voyager images of Amalthea are presented, which reveal an irregular satellite in synchronous rotation relative to Jupiter with dimensions of 270 x 165 x 150 km. The surface appears scarred by large craters and sharp ridges to indicate a history of cosmic battering. Amalthea'a normal surface reflectance is 5-6% with a very red color and a mean opposition angle magnitude of +14. The phase coefficient between phase angles of 0.8 and 42 deg of 0.042 + or - 0.004 mag/deg indicates that the phase integral does not exceed 0.3 and the Bond Albedo is less than 0.02. Several prominent bright spots of 10-50 km across occur on local slopes and ridges, have albedos several times higher than the background, and have a greenish color where the spectrum bends down beyond 0.56 microns.

Veverka, J.↗

Modification of the loss cone for energetic particles

Abstract The optimal pitch angle which maximizes the penetration distance, along the magnetic field, of relativistic charged particles injected from the midplane of an axisymmetric field is investigated analytically and numerically. Higher‐order terms of the magnetic moment invariant are necessary to correctly determine the mirror point of trapped energetic particles, and therefore the loss cone. The modified loss cone resulting from the inclusion of higher‐order terms is no longer entirely defined by the pitch angle but also by the phase angle of the particle at the point of injection. The optimal orientation of the injection has a nonzero component perpendicular to the magnetic field line, and is in the plane tangential to the flux surface. Numerical integration of particle orbits were carried out for a relativistic electron in a dipole field, showing agreement with analytic expressions. The results are relevant to experiments, which are concerned with injection of relativistic beams into the atmosphere from aboard a spacecraft in the magnetosphere.

Porazik, Peter↗

Detection of ocean glint and ozone absorption using LCROSS Earth observations

The Lunar CRater Observation and Sensing Satellite (LCROSS) observed the distant Earth on three occasions in 2009. These data span a range of phase angles, including a rare crescent phase view. For each epoch, the satellite acquired near-infrared and mid-infrared full-disk images, and partial-disk spectra at 0.26-0.65 μm (λ/Δλ ∼ 500) and 1.17-2.48 μm (λ/Δλ ∼ 50). Spectra show strong absorption features due to water vapor and ozone, which is a biosignature gas. We perform a significant recalibration of the UV-visible spectra and provide the first comparison of high-resolution visible Earth spectra to the NASA Astrobiology Institute's Virtual Planetary Laboratory three-dimensional spectral Earth model. We find good agreement with the observations, reproducing the absolute brightness and dynamic range at all wavelengths for all observation epochs, thus validating the model to within the ∼10% data calibration uncertainty. Data-model comparisons reveal a strong ocean glint signature in the crescent phase data set, which is well matched by our model predictions throughout the observed wavelength range. This provides the first observational test of a technique that could be used to determine exoplanet habitability from disk-integrated observations at visible and near-infrared wavelengths, where the glint signal is strongest. We examine the detection of the ozone 255 nm Hartley and 400-700 nm Chappuis bands. While the Hartley band is the strongest ozone feature in Earth's spectrum, false positives for its detection could exist. Finally, we discuss the implications of these findings for future exoplanet characterization missions.

79 ASTRONOMY AND ASTROPHYSICS↗

Grid Forming Control Tuning for a Hybrid Inverter-Based Resource Power Plant

A hybrid inverter-based resource (IBR) power plant consists of grid-following (GFL) and grid-forming inverter-based resources (GFM-IBR) connected in parallel. Here, this research focuses on how to design and tune GFM's control parameters to ensure stable operation of the hybrid power plant for weak and strong grid conditions. We consider two design cases: one where the GFL-IBR does not provide frequency support, and one where it does. It is found that the GFM's power-frequency synchronizing system can lose stability when the power-frequency droop constant is large and/or the grid is strong. Additionally, if the GFL has its frequency support enabled, oscillation stability worsens. To explain the mechanism of the interactions, we construct a feedback system for the synchronizing loop, which consists of the GFM's power-frequency droop control that generates the GFM's synchronizing angle, the GFL's phase-locked loop that measures the voltage phase angle, the GFL's frequency-power control that generates its power order, and the rest of the system. The feedback system is effective in illustrating the potential stability risks. Successful design ensures that the hybrid power plant can operate smoothly and ride through grid disturbances.

feedback systems↗

Optical properties of orbital debris

This paper discusses the albedoes and phase angle effects found for 400 members of eight debris swarms using observations obtained in 1990 and 1991 with the NASA Johnson Space Center CCD-equipped portable Schmidt telescope. The mean albedo derived by comparing optical brightnesses with averaged radar cross sections (RCS's) is 10 percent. The standard deviation in log albedo is 0.40 if the RCS's are assumed to contribute equally to the scatter. The RCS's used in this work are the median values obtained by comparing data from 47 separate RCS catalog updates. Forty objects are sufficiently free of tumble or aspect angle effects to yield consistent phase function slopes. These range from specular in nature (zero slope) through Lambertian (moderate slope) to lunar (steep slope) with the mean lying midway between specular and Lambertian.

Henize, Karl G.↗

Aeroelastic Stability Computations for Turbomachinery

This paper describes an aeroelastic analysis program for turbomachines. Unsteady Navier-Stokes equations are solved on dynamically deforming, body fitted, grid to obtain the aeroelastic characteristics. Blade structural response is modeled using a modal representation of the blade and the work-per-cycle method is used to evaluate the stability characteristics. Nonzero interblade phase angle is modeled using phase-lagged boundary conditions. Results obtained showed good correlation with existing experimental, analytical, and numerical results. Numerical analysis also showed that given the computational resources available today, engineering solutions with good accuracy are possible using higher fidelity analyses.

Srivastava, R.↗