Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PERMITTIVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Structure, upconversion photoluminescence, and dielectric properties of Ho{sup 3+}- and Yb{sup 3+}-codoped tetragonal tungsten bronze Sr{sub 4}La{sub 2}Ti{sub 4}Nb{sub 6}O{sub 30}

Highlights: • TTB-type SLTN: Ho-Ybx with space group P4/mbm was determined. • UC photoluminescence of SLTN: Ho-Ybx ceramics was first reported. • Bright UC green emission was observed at room temperature. • Two-photon energy transfer process was confirmed for the UC processes. • Temperature stability of dielectric permittivity was improved for SLTN: Ho-Ybx. - Abstract: Ho{sup 3+}- and Yb{sup 3+}-codoped Sr{sub 4}La{sub 2}Ti{sub 4}Nb{sub 6}O{sub 30} (Sr{sub 4}La{sub 1.94–x}Ho{sub 0.06}Yb{sub x}Ti{sub 4}Nb{sub 6}O{sub 30}, abbreviated as SLTN: Ho-Ybx) ceramics have been synthesized, and their structural, up-conversion (UC) photoluminescence, and dielectric properties have been carefully investigated. Through Rietveld structural refinement, SLTN: Ho-Ybx samples are determined as single tetragonal tungsten bronze (TTB) phase with space group P4/mbm in which larger Sr{sup 2+} ions fill the A{sub 2}-sites, relative smaller La{sup 3+}, Ho{sup 3+}, and Yb{sup 3+} ions occupy the A{sub 1}-sites, while Ti{sup 4+} and Nb{sup 4+} ions fill the B-sites. Under 980 nm near infrared (NIR) excitation, bright UC green emission, relatively weak red and near-infrared (NIR) emissions, originating from {sup 5}F{sub 4}/{sup 5}S{sub 2} → {sup 5}I{sub 8}, {sup 5}F{sub 5} → {sup 5}I{sub 8}, and {sup 5}F{sub 4}/{sup 5}S{sub 2} → {sup 5}I{sub 7} transitions of Ho{sup 3+} ions, are confirmed for SLTN: Ho-Ybx. Two-photon energy transfer process is proved through pumping laser power dependence of emission intensity measurement. Furthermore, the influence of Ho{sup 3+}- and Yb{sup 3+}- ions on the dielectric properties of SLTN: Ho-Ybx is also investigated and the temperature stability of dielectric permittivity is improved.

36 MATERIALS SCIENCE↗

Electrical properties of AC{sub 3}B{sub 4}O{sub 12}-type perovskite ceramics with different cation vacancies

Highlights: • AC{sub 3}B{sub 4}O{sub 12} perovskite with different concentration cation vacancies were prepared. • Cell parameter decreases with the increase of concentration of cation vacancies. • PTCO and CTO remain high dielectric permittivity but depress loss greatly. • Dielectric loss associates with cation vacancies and motion of oxygen vacancies. - Abstract: AC{sub 3}B{sub 4}O{sub 12}-type perovskite CaCu{sub 3}Ti{sub 4}O{sub 12} (CCTO), □{sub 0.34}Pr{sub 0.67}Cu{sub 3}Ti{sub 4}O{sub 12} (PCTO), □{sub 1}Cu{sub 3}Ta{sub 2}Ti{sub 2}O{sub 12} (CTTO), □{sub 2}Cu{sub 2}Ta{sub 4}O{sub 12} (CTO) ceramics with different concentration cation vacancies were prepared through traditional solid state reaction method. X-ray diffraction analysis indicated that CCTO and PCTO are perovskite cubic with space group Im-3 (no. 204) while CTTO and CTO are Pm-3 (no. 200). Cell parameter of the samples dramatically increases with the increase of cation vacancies. Dielectric permittivity of them maintains very high value of ∼10{sup 4} from room temperature to 550 K but the dielectric loss is depressed with the increase of cation vacancies in the same space group. The dielectric properties and conductivity behavior were described by the Debye relaxation and the universal dielectric response, respectively. The effect mechanism of cation vacancy and crystal structure on carrier transposition were discussed.

36 MATERIALS SCIENCE↗

Green synthesis of magnesium ion incorporated nanocrystalline hydroxyapatite and their mechanical, dielectric and photoluminescence properties

Highlights: • Rapid technique to synthesize nanorods of magnesium ion incorporated hydroxyapatite. • Enhanced electrical and mechanical properties. • Improved photoluminescence and wettability on magnesium incorporation. • Increased in vitro bioactivity. - Abstract: Nanocrystalline hydroxyapatite (HAp-Ca{sub 10}(PO{sub 4}){sub 6}(OH){sub 2,} 35 nm) and magnesium (Mg{sup 2+}) ion incorporated HAp were synthesized by microwave technique. XRD (X-ray diffraction), FTIR (Fourier transform infrared spectroscopy), FE-HRTEM (Field emission high resolution transmission electron microscopy), DLS (dynamic light scattering), EDXRF (energy dispersive X-ray fluorescence spectrometry), microhardness, permittivity and alternating current (ac) conductivity, besides the PL (photoluminescence), wettability and in vitro bioactivity of the samples were analysed. EDXRF revealed the Mg{sup 2+} ion incorporation in HAp. The Mg{sup 2+} ion incorporation did not alter the phase but drastically reduced the crystallite size and particle size respectively by 48% and 32%. There was enhanced microhardness (24%) at low level (<13%) and decreased zeta potential of Mg{sup 2+} ion incorporation. The permittivity, ac conductivity, PL, wettability and in vitro bioactivity were enhanced on Mg{sup 2+} ion incorporation. These properties enable them to be a promising candidate for wound healing, bone replacement applications and also as a biosensor.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Effect of mechanical alloying synthesis process on the dielectric properties of (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} piezoceramics

Highlights: • MA samples show higher dielectric permittivity and Curie temperature. • In MA samples, dielectric loss is almost 27% less than conventional ones. • In MA samples, sintering time and temperature are lower than conventional ones. • In MA samples, particle morphology is more homogeneous conventional ones. • In MA samples, crystallite size is smaller conventional ones. - Abstract: In present work, in order to study the effects of synthesis techniques on dielectric properties, the BNBT lead-free piezoceramics with (Bi{sub 0.5}Na{sub 0.5}){sub 0.94}Ba{sub 0.06}TiO{sub 3} stoichiometry (called as BNBT6) were synthesized by mechanical alloying (MA) and conventional mixed oxides methods. The structural, microstructural, and dielectric properties were carried out by X-ray diffractometer (XRD), scanning electron microscope (SEM), and impedance analyzer LCR meter, respectively. Based on results, the density of MA samples is considerably higher than conventional samples owning to smaller particles size and more uniformity of particle shape of MA samples. Moreover, the dielectric properties of MA samples are comparatively improved in which the dielectric loss of these samples is almost 27% less than conventional ones. Furthermore, MA samples exhibit obviously higher dielectric permittivity and Curie temperature compared to the conventional samples.

36 MATERIALS SCIENCE↗

Fabrication of flower-like Ni0.5Co0.5(OH)2@PANI and its enhanced microwave absorption performances

Highlights: • Ni{sub 0.5}Co{sub 0.5}(OH){sub 2} with flower-like structure@PANI was designed and synthesized via a two-step route. • The maximum reflection loss of Ni{sub 0.5}Co{sub 0.5}(OH){sub 2}@PANI is −39.8 dB at 6.4 GHz with a matching thickness of 2.5 mm. • The 3D flower-like architecture of Ni{sub 0.5}Co{sub 0.5}(OH){sub 2}@PANI possesses high specific surface area, large permittivity and improved impedance matching effect. - Abstract: Ni{sub 0.5}Co{sub 0.5}(OH){sub 2} with flower-like structure@PANI was designed and synthesized via a two-step route. Field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM) results illustrated that the Ni{sub 0.5}Co{sub 0.5}(OH){sub 2} had a 3D flower structure with a homogeneous distribution. The Ni{sub 0.5}Co{sub 0.5}(OH){sub 2} was coated by polyaniline (PANI) and embedded in polyaniline matrix. The as-synthesized Ni{sub 0.5}Co{sub 0.5}(OH){sub 2}@PANI possessed a BET specific surface area of 58.82 m{sup 2} g{sup −1}, and its pore diameter was in the mesoporous range (3.93 nm). Investigations of EM wave absorption properties indicated that the maximum absorption intensity of Ni{sub 0.5}Co{sub 0.5}(OH){sub 2}@PANI was as high as −39.8 dB at 6.4 GHz and the absorption bandwidth exceeding −10 dB was 3.1 GHz (4.9–8 GHz) with a matching thickness of 2.5 mm. The excellent EM wave absorption properties of the material were ascribed to its high permittivity and improved impedance matching effect. Therefore, it is anticipated that the Ni{sub 0.5}Co{sub 0.5}(OH){sub 2}@PANI composite would serve as a promising microwave absorber.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhanced temperature-stable dielectric properties in oxygen annealed 0.85(K0.5Na0.5)NbO3-0.15SrZrO3 ceramic

Highlights: • Prepared O{sub 2}-annealed KNN-15SZ could meet the EIA X8R specification. • Oxygen annealing resulted in different variation of T{sub m} of cores and shells. • Variation of T{sub m} related to decrease of oxygen vacancies and diffusion of KNN. • Enhanced dielectric temperature stability attributed to change of PNRs size. - Abstract: The structure, morphology and dielectric properties of the oxygen annealed (O{sub 2}-annealed) and untreated (as-prepared) 0.85(K{sub 0.5}Na{sub 0.5}) NbO{sub 3}-0·15SrZrO{sub 3} (KNN-15SZ) ceramics were investigated. The temperature dependence of dielectric permittivity shows two diffuse dielectric peaks associated with duplex core-shell structure, leading to relatively stable dielectric permittivity in a wide temperature range. Interestingly, the O{sub 2}-annealed sample with the operating temperature range of −104 °C–157 °C could meet the EIA X8R specification, which is superior to the as-prepared one (−98 °C–130 °C) for the EIA X7R specification. Furthermore, the dielectric contribution from cores and shells of both samples was divided by the Lorentz fitting. The relation between relaxation frequency and temperature of both samples obeyed the Vogel-Fulcher law. This finding could pave a possible way to modify dielectric temperature stability for multilayer ceramic chip capacitors applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High energy storage density of temperature-stable X9R ceramics

Highlights: • The addition of KNbO{sub 3} improved the temperature-stable properties and energy density. • The x = 0.07 and x = 0.09 sample met the X8R requirements. • The x = 0.03 and x = 0.05 sample met the X9R requirements. • The maximum discharge energy density of x = 0.05 sample reached up to 2 J/cm{sup 3} at 17.85 kV/mm. - Abstract: The effects of KNbO{sub 3} addition on the temperature stability of dielectric properties and energy-storage performances of Sr{sub 0.5}Na{sub 0.25}Bi{sub 0.25}TiO{sub 3}-MgO ((1-x)SNBTM5-xKN) ceramics were systematically investigated. It shows that KNbO{sub 3} has completely diffused into SNBT lattice to form a solid solutions. Two obvious maxima in permittivity curves were observed due to the formation of the polar nanoregions. For the sample with x = 0.05 addition, its permittivity variation region, where △ε'/ε'{sub 25 °C} is no more than ± 15%, retains wide the range from −55 °C to 200 °C, indicating that the ceramics can meet the requirement of X9R specification. Furthermore, this sample shows a high electric breakdown strength of 17.85 kV/mm and a high discharge energy density of 2 J/cm{sup 3}. The noticeable reduced remnant polarization induced by KNbO{sub 3} addition also contributes to the improved energy-storage performances. Thus, these novel ceramics with the aforementioned characteristics will potentially benefit the applications of high pulse power capacitors at high temperatures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase structure, dielectric properties, and relaxor behavior of (K{sub 0.5}Na{sub 0.5})NbO{sub 3}-(Ba{sub 0.5}Sr{sub 0.5})TiO{sub 3} lead-free solid solution for high temperature applications

The (1-x)(K{sub 0.5}Na{sub 0.5})NbO{sub 3}-x(Ba{sub 0.5}Sr{sub 0.5})TiO{sub 3} (KNN-BST) solid solution has been synthesized by conventional solid-state sintering in order to search for the new lead-free relaxor ferroelectrics for high temperature applications. The phase structure, dielectric properties, and relaxor behavior of the (1-x)KNN-xBST solid solution are systematically investigated. The phase structure of the (1-x)KNN-xBST solid solution gradually changes from pure perovskite phase with an orthorhombic symmetry to the tetragonal symmetry, then to the pseudocubic phase, and to the cubic phase with increasing addition of BST. The 0.90KNN-0.10BST solid solution shows a broad dielectric peak with permittivity maximum near 2500 and low dielectric loss (<4%) in the temperature range of 100-250 deg. C. The result indicates that this material may have great potential for a variety of high temperature applications. The diffuse phase transition and the temperature of the maximum dielectric permittivity shifting toward higher temperature with increasing frequency, which are two typical characteristics for relaxor ferroelectrics, are observed in the (1-x)KNN-xBST solid solution. The dielectric relaxor behavior obeys a modified Curie-Weiss law and a Vogel-Fulcher relationship. The relaxor nature is attributed to the appearance of polar nanoregions owing to the formation of randon fields including local electric fields and elastic fields. These results confirm that the KNN-based relaxor ferroelectrics can be regarded as an alternative direction for the development of high temperature lead-free relaxor ferroelectrics.

36 MATERIALS SCIENCE↗

Effect of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO glass on the dielectric and magnetic properties of ferroelectric/ferromagnetic composite for low temperature cofired ceramic technology

Ni-Cu-Zn ferrite/BaTiO{sub 3} composites with different additive amounts of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO (BBSZ) glass have been prepared by a conventional solid-reaction method and sintered at 900 deg. C to adapt to low temperature cofired ceramic (LTCC) technology. The dielectric and magnetic properties of the composites can be effectively improved with increasing BBSZ content. Here, the BBSZ glass mainly plays two roles, one is as a sintering aid promoting grain growth and the other is as a low permittivity phase or nonmagnetic phase leading to dilution effect on the dielectric or magnetic properties of the composites. The effect degree of above two roles is related to the variation in BBSZ content and has been discussed combining with the effective medium theory. The lower and upper bounds for the effective permittivity and permeability have been given by the Maxwell-Garnett rules.

36 MATERIALS SCIENCE↗

Microwave resonances of a hairpin probe in a magnetized plasma

The effect due to the electron cyclotron frequency on the microwave resonances of a hairpin probe is investigated in a moderate to strongly magnetized plasma. The magnetic field is independently varied over a wide range from 0.01-0.13 T while maintaining the local plasma density constant. At strong magnetic fields the resonance frequency is found to be lower than that measured in vacuum implying that the relative plasma dielectric permittivity, epsilon{sub p}>1. It is proposed that the experiments reported here are consistent with a permittivity model that includes magnetic field.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Microwave properties of epitaxial (111)-oriented Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} thin films on Al{sub 2}O{sub 3}(0001) up to 40 GHz

Perovskite Ba{sub 0.6}Sr{sub 0.4}TiO{sub 3} (BST) thin films have been grown on Al{sub 2}O{sub 3}(0001) substrates without/with inserting an ultrathin TiO{sub x} seeding layer by rf magnetron sputtering. X-ray diffraction and pole figure studies reveal that the film with the TiO{sub x} layer (12-A-thick) is highly oriented along the (111) direction and exhibits a good in-plane relationship of BST(111)||Al{sub 2}O{sub 3}(0001). The high frequency dielectric measurements demonstrate that the complex permittivity ({epsilon}={epsilon}{sup '}-j{epsilon}{sup ''}) is well described by a Curie-von Scheidler dispersion with an exponent of 0.40. The resulting epitaxial BST films show high permittivity ({approx}428) and tunability ({approx}41%, at 300 kV/cm and 40 GHz) and their microwave properties (1-40 GHz) potentially could be made suitable for tunable devices.

36 MATERIALS SCIENCE↗

Structure, dielectric, and magnetic properties of Sr{sub 2}TiMnO{sub 6} ceramics

Sr{sub 2}TiMnO{sub 6}, a double perovskite associated with high degree of B-site cation disorder was investigated in detail for its structural, magnetic, and dielectric properties. Though x-ray powder diffraction analysis confirms its cubic structure, first order Raman scattering and infrared reflectivity spectra indicate a breaking of the local cubic symmetry. The magnetization study reveals an anomaly at 14 K owing to a ferrimagnetic/canted antiferromagneticlike ordering arising from local Mn-O-Mn clusters. Saturated M-H hysteresis loops obtained at 5 K also reflect the weak ferromagnetic exchange interactions present in the system and an approximate estimation of Mn{sup 3+}/Mn{sup 4+} was done using the magnetization data for the samples sintered at different temperatures. The conductivity and dielectric behavior of this system has been investigated in a broad temperature range of 10 to 300 K. Intrinsic permittivity was obtained only below 100 K whereas giant permittivity due to conductivity and Maxwell-Wagner polarization was observed at higher temperatures. X-ray photoemission studies further confirmed the presence of mixed oxidation states of Mn and the valence band spectra analysis was carried out in detail.

36 MATERIALS SCIENCE↗

Soft and hybrid-doped Pb(Zr,Ti)O{sub 3} ceramics under stress, electric field, and temperature loading

We investigated the influence of uniaxial pressure (0-1000 bars) applied parallelly or perpendicularly to the ac or dc electric field (in a one-dimensional or two-dimensional manner) on dielectric and ferroelectric properties of selected soft and hybrid-doped PZT ceramics (1 mol. % Gd, 1 mol. % La and 1 mol. % (La+Fe)-doped Pb(Zr{sub 0.54}Ti{sub 0.46}) O{sub 3}). Applying uniaxial pressure leads to a reduction of the peak intensity of the electric permittivity ({epsilon}), of the frequency dispersion, and of the dielectric hysteresis. The peak intensity of {epsilon} becomes diffused and shifts to a higher temperatures with increasing pressure. Simultaneous application of uniaxial pressure and dc electric field (perpendicular to each other) in the poling process implies in improvement of the ferroelectric properties, indicating a new possibility for poling materials with a high coercive field and/or high electric conductivity. It was also found that simultaneous application of uniaxial pressure and dc electric field (perpendicular to each other) allowed observation of the space charge in the depolarization process. The electrostrictive coefficient Q{sub 11} and differential permittivity were evaluated from obtained data. Our results show that applying uniaxial pressure induces similar effects as increasing the Ti-ion concentration in the PZT system. We interpreted our results based on the Cochran soft-mode and domain switching processes under the action of pressure.

36 MATERIALS SCIENCE↗

Nonlinear heating of underdense collisional plasma by a laser pulse

The nonlinear interaction of a laser pulse with a homogenous unmagnetized underdense plasma, taking ohmic heating and the effects of ponderomotive force into account, is theoretically studied. Since the ponderomotive force modifies the electrons density and temperature distribution, the nonlinear dielectric permittivity of plasma is obtained in non-relativistic regime. Furthermore, electric and magnetic fields, electron density, temperature distribution, and the effective permittivity variations are obtained in terms of plasma length by making use the steady state solutions of the Maxwell and hydrodynamic equations. It is shown that the oscillations wave length of electric and magnetic fields decreases when the laser intensity increases. At the same time, in this case, electron density oscillations become highly peaked. Also, the amplitude of the electron temperature oscillations increase and their wavelength decreases.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic models of partially ionized complex plasmas in the low frequency regime

The results from three kinetic models of complex plasmas taking into account collisions with neutrals are compared in the low-frequency regime: The ''full'' model which considers the absorption of plasma fluxes on dust particles and dust charge fluctuations, the ''multi-component'' model where both these effects are neglected, and the ''standard'' model which takes into account the dust charge perturbations but not the absorption of fluxes. We derive and numerically evaluate expressions of the low frequency responses of these models, also taking into account the modification of the capture cross-sections due to the effect of neutrals. The role of plasma sources and collisions with neutrals is assessed by computing the plasma permittivities and static permittivities for all the three models.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Correlations of dielectric properties with electronic structure and phonon vibration of low loss tunable Ba{sub 0.4}Sr{sub 0.6}Ti{sub 1-y}Mn{sub y}O{sub 3} ceramics

Correlations of dielectric properties with electronic structure and phonon vibration of Ba{sub 0.4}Sr{sub 0.6}Ti{sub 1-y} Mn{sub y}O{sub 3} (y = 0.00-0.20) ceramics were studied by using spectroscopic techniques. High level of Mn substitution prevented the reduction of Ti{sup 4+} and enhanced the charge ordering of Ti{sup 3+}/Ti{sup 4+}, leading to materials with high Q values. An increase in the concentration of Mn resulted in hardening of the softest mode, which led to a reduction in relative permittivity, dielectric loss, and tunability with increasing y. Raman spectra revealed that higher vibration frequency of Ti-O bonds was related to lower relative permittivity, and narrower width of Mn-O stretching corresponded to a higher Q x f.

36 MATERIALS SCIENCE↗

Dirac cone and double zero materials

Materials with zero permittivity and zero permeability (double zero) possess very interesting wave manipulation characteristics. Systems with Dirac cones in the band structure also possess amazing wave transport properties. These two classes of material are actually related to each other. We show that dielectric photonic crystals can be designed and fabricated which exhibit Dirac cones at k = 0 at a finite frequency. A subset of such materials behave as if they have zero permittivity and zero permeability at the Dirac point, as well as exhibiting properties intrinsic to a Dirac cone.

36 MATERIALS SCIENCE↗

Ferromagnetic Resonance of Micro- and Nano-sized Hexagonal Ferrite Powders at Millimeter Waves

Complex magnetic permeability and dielectric permittivity of micro- and nano-sized powdered barium (BaFe{sub 12}O{sub 19}) and strontium (SrFe{sub 12}O{sub 19}) hexaferrites have been studied in a broadband millimeter wave frequency range (30-120 GHz). Transmittance measurements have been performed using a free space quasi-optical millimeter wave spectrometer, equipped with a set of high power backward wave oscillators. Real and imaginary parts of dielectric permittivity for both types of micro- and nanoferrites have been calculated using analysis of recorded high precision transmittance spectra. Frequency dependences of the magnetic permeability have been obtained from Schloemann's equation for partially magnetized ferrites. These materials show promise as tunable millimeter wave absorber, based on their size-dependent absorption.

36 MATERIALS SCIENCE↗