SEARCH · Engineering Papers

Results for “PERIODICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2021

Clogging, dynamics, and reentrant fluid for active matter on periodic substrates

Here, we examine the collective states of run-and-tumble active matter disks driven over a periodic obstacle array. When the drive is applied along a symmetry direction of the array, we find a clog-free uniform liquid state for low activity, while at higher activity, the density becomes increasingly heterogeneous and an active clogged state emerges in which the mobility is strongly reduced. For driving along nonsymmetry or incommensurate directions, there are two different clogging behaviors consisting of a drive-dependent clogged state in the low activity thermal limit and a drive-independent clogged state at high activity. These regimes are separated by a uniform flowing liquid at intermediate activity. There is a critical activity level above which the thermal clogged state does not occur, as well as an optimal activity level that maximizes the disk mobility. Thermal clogged states are dependent on the driving direction while active clogged states are not. In the low activity regime, diluting the obstacles produces a monotonic increase in the mobility; however, for large activities, the mobility is more robust against obstacle dilution. We also examine the velocity-force curves for driving along nonsymmetry directions and find that they are linear when the activity is low or intermediate but become nonlinear at high activity and show behavior similar to that found for the plastic depinning of solids. At higher drives, the active clustering is lost. For low activity, we also find a reentrant fluid phase, where the system transitions from a high mobility fluid at low drives to a clogged state at higher drives and then back into another fluid phase at very high drives. We map the regions in which the thermally clogged, partially clogged, active uniform fluid, clustered fluid, active clogged, and directionally locked states occur as a function of disk density, drift force, and activity.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Measurement and memory in the periodically driven complex Ginzburg-Landau equation

In the present work we illustrate that classical but nonlinear systems may possess features reminiscent of quantum ones, such as memory, upon suitable external perturbation. As our prototypical example, we use the two-dimensional complex Ginzburg-Landau equation in its vortex glass regime. Here, we impose an external drive as a perturbation mimicking a quantum measurement protocol, with a given “measurement rate” (the rate of repetition of the drive) and “mixing rate” (characterized by the intensity of the drive). Using a variety of measures, we find that the system may or may not retain its coherence, statistically retrieving its original glass state, depending on the strength and periodicity of the perturbing field. The corresponding parametric regimes and the associated energy cascade mechanisms involving the dynamics of vortex waveforms and domain boundaries are discussed.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2022

Superlubric-pinned transition of a two-dimensional solid dusty plasma under a periodic triangular substrate

Here, the superlubric-pinned transition in the depinning dynamics of a two-dimensional (2D) solid dusty plasma modulated by 2D triangular periodic substrates is investigated using Langevin dynamical simulations. When the lattice structure of the 2D solid dusty plasma perfectly matches the triangular substrate, two distinctive pinned and moving ordered states are observed as the external uniform driving force gradually increases from zero. When there is a mismatch between the lattice structure and the triangular substrate, however, on shallow substrates, it is discovered that all of the particles can slide freely on the substrate even when the applied driving force is tiny. This is a typical example of superlubricity, which is caused by the competition between the substrate-particle and particle-particle interactions. If the substrate depth increases further, as the driving force increases from zero, there are three dynamical states consisting of the pinned state, the disordered plastic flow state, and the moving ordered state. In an underdense system, where there are fewer particles than potential well minima, it is found that the occurrence of the three different dynamical states is controlled by the depth of the substrate, which is quantitatively characterized using the average mobility.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2024

Reversible, irreversible, and mixed regimes for periodically driven disks in random obstacle arrays

We examine an assembly of repulsive disks interacting with a random obstacle array under a periodic drive and find a transition from reversible to irreversible dynamics as a function of drive amplitude or disk density. At low densities and drives, the system rapidly forms a reversible state where the disks return to their exact positions at the end of each cycle. In contrast, at high amplitudes or high densities, the system enters an irreversible state where the disks exhibit normal diffusion. Between these two regimes, there can be an intermediate irreversible state where most of the system is reversible, but localized irreversible regions are present that are prevented from spreading through the system due to a screening effect from the obstacles. Here, we also find states that we term “combinatorial reversible states” in which the disks return to their original positions after multiple driving cycles. In these states, individual disks exchange positions but form the same configurations during the subcycles of the larger reversible cycle.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2024

Peak effect and dynamics of stripe- and pattern-forming systems on a periodic one-dimensional substrate

Here we examine the ordering, pinning, and dynamics of two-dimensional pattern-forming systems interacting with a periodic one-dimensional substrate. In the absence of the substrate, particles with competing long-range repulsion and short-range attraction form anisotropic crystal, stripe, and bubble states. When the system is tuned across the stripe transition in the presence of a substrate, we find that there is a peak effect in the critical depinning force when the stripes align and become commensurate with the substrate. Under an applied drive, the anisotropic crystal and stripe states can exhibit soliton depinning and plastic flow. When the stripes depin plastically, they dynamically reorder into a moving stripe state that is perpendicular to the substrate trough direction. We also find that when the substrate spacing is smaller than the widths of the bubbles or stripes, the system forms pinned stripe states that are perpendicular to the substrate trough direction. The system exhibits multiple reentrant pinning effects as a function of increasing attraction, with the anisotropic crystal and large bubble states experiencing weak pinning but the stripe and smaller bubble states showing stronger pinning. We map out the different dynamic phases as a function of filling, the strength of the attractive interaction term, the substrate strength, and the drive, and demonstrate that the different phases produce identifiable features in the transport curves and particle orderings.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2025

Shapiro steps observed in a two-dimensional Yukawa solid modulated by a one-dimensional vibrational periodic substrate

Depinning dynamics of a two-dimensional (2D) solid dusty plasma modulated by a one-dimensional (1D) vibrational periodic substrate are investigated using Langevin dynamical simulations. As the uniform driving force increases gradually, from the overall drift velocity varying with the driving force, four significant Shapiro steps are discovered. The data analysis results indicate that, when the ratio of the frequency from the drift motion over potential wells to the external frequency from the modulation substrate is close to integers, dynamic mode locking occurs, corresponding to the discovered Shapiro steps. In conclusion, around both termini of the first and fourth Shapiro steps, the transitions are found to be always continuous, however, the transition between the second and third Shapiro steps is discontinuous, probably due to the different arrangements of particles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Topological Exact Flat Bands in Two-Dimensional Materials under Periodic Strain

Here we study flat bands and their topology in 2D materials with quadratic band crossing points under periodic strain. In contrast to Dirac points in graphene, where strain acts as a vector potential, strain for quadratic band crossing points serves as a director potential with angular momentum . We prove that when the strengths of the strain fields hit certain “magic” values, exact flat bands with emerge at charge neutrality point in the chiral limit, in strong analogy to magic angle twisted-bilayer graphene. These flat bands have ideal quantum geometry for the realization of fractional Chern insulators, and they are always fragile topological. The number of flat bands can be doubled for certain point group, and the interacting Hamiltonian is exactly solvable at integer fillings. We further demonstrate the stability of these flat bands against deviations from the chiral limit, and discuss possible realization in 2D materials.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Vortex Lattices in Active Nematics with Periodic Obstacle Arrays

Here, we numerically model a two-dimensional active nematic confined by a periodic array of fixed obstacles. Even in the passive nematic, the appearance of topological defects is unavoidable due to planar anchoring by the obstacle surfaces. We show that a vortex lattice state emerges as activity is increased, and that this lattice may be tuned from “ferromagnetic” to “antiferromagnetic” by varying the gap size between obstacles. We map the rich variety of states exhibited by the system as a function of distance between obstacles and activity, including a pinned defect state, motile defects, the vortex lattice, and active turbulence. We demonstrate that the flows in the active turbulent phase can be tuned by the presence of obstacles, and explore the effects of a frustrated lattice geometry on the vortex lattice phase.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Particle Dynamics in a Diblock-Copolymer-Based Dodecagonal Quasicrystal and Its Periodic Approximant by X-Ray Photon Correlation Spectroscopy

Temperature-dependent X-ray photon correlation spectroscopy (XPCS) measurements are reported for a binary diblock copolymer blend that self-assembles into an aperiodic dodecagonal quasicrystal (DDQC) and a periodic Frank-Kasper σ phase approximant. The measured structural relaxation times are Bragg scattering wavevector-independent and are five times faster in the DDQC than the σ phase, with minimal temperature dependence. Further, the underlying dynamical relaxations are ascribed to differences in particle motion at the grain boundaries within each of these tetrahedrally close-packed assemblies. These results identify unprecedented particle dynamics measurements of tetrahedrally-coordinated micellar block polymers, thus expanding the application of XPCS to ordered soft materials.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

DOE OSTI2024

Search for Periodic Time Variations of the Solar 8 B Neutrino Flux between 1996 and 2018 in Super-Kamiokande

We report a search for time variations of the solar 8 B neutrino flux using 5804 live days of Super-Kamiokande data collected between May 31, 1996, and May 30, 2018. Super-Kamiokande measured the precise time of each solar neutrino interaction over 22 calendar years to search for solar neutrino flux modulations with unprecedented precision. Periodic modulations are searched for in a dataset comprising five-day interval solar neutrino flux measurements with a maximum likelihood method. We also applied the Lomb-Scargle method to this dataset to compare it with previous reports. The only significant modulation found is due to the elliptic orbit of the Earth around the Sun. The observed modulation is consistent with astronomical data: we measured an eccentricity of (1.53 ± 0.35)%, and a perihelion shift of (−1.5 ± 13.5) days.

astroparticle detectors↗

DOE OSTI2024

Sliding dynamics for bubble phases on periodic modulated substrates

We analyze a bubble-forming system composed of particles with competing long-range repulsive and short-range attractive interactions driven over a quasi-one-dimensional periodic substrate. We find various pinned and sliding phases as a function of substrate strength and drive amplitude. When the substrate is weak, a pinned bubble phase appears that depins elastically into a sliding bubble lattice. For stronger substrates, we find anisotropic bubbles, disordered bubbles, and stripe phases. Plastic depinning occurs via the hopping of individual particles from one bubble to the next in a pinned bubble lattice, and as the drive increases, there is a transition to a state where all of the bubbles are moving but are continuously shedding and absorbing individual particles. This is followed at high drives by a moving bubble lattice in which the particles can no longer escape their individual bubbles. The transition between the plastic and elastic sliding phases can be detected via signatures in the velocity-force curves, differential conductivity, and noise. When the bubbles shrink due to an increase in the attractive interaction term, they fit better inside the pinning troughs and become more strongly pinned, leading to a reentrant pinning phase. For weaker attractive terms, the size of the bubbles becomes greater than the width of the pinning troughs and the depinning becomes elastic with a reduced depinning threshold. Published by the American Physical Society 2024

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2025

Subharmonic Shapiro steps in depinning dynamics of a two-dimensional solid dusty plasma modulated by one-dimensional nonlinear deformed periodic substrates

Langevin dynamical simulations are performed to investigate the depinning dynamics of a two-dimensional (2D) solid dusty plasma, which is modulated by one-dimensional (1D) nonlinear deformed periodic substrates, and also driven by the combination of the DC and AC forces. As the DC driving force increases gradually, pronounced subharmonic and harmonic Shapiro steps are discovered under the combined modulation of the deformed substrate and the external AC drive. Here, these observed subharmonic and harmonic Shapiro steps are attributed to the dynamic mode locking. The data analysis results indicate that the nonlinear deformed substrate strongly influences these subharmonic Shapiro steps, which can be accurately diagnosed using the fraction of sixfold coordinated particles. Furthermore, the diagnostic of the kinetic temperature clearly indicates the difference between harmonic and subharmonic Shapiro steps, i.e., the particle motion is slightly less synchronized at subharmonic Shapiro steps, caused by the unstable locations of the deformed substrate.

36 MATERIALS SCIENCE↗

DOE OSTI2025

Growth functions of periodic space tessellations

This work analyzes the rules governing the growth of the numbers of vertices, edges and faces in all possible periodic tessellations of the 2D Euclidean space, and encodes those rules in several types of polynomial growth functions. These encodings map the geometric, combinatorial and topological properties of the tessellations into sets of integer coefficients. Several general statements about these encodings are given with rigorous mathematical proof. The variation of the growth functions is represented graphically and analyzed in orphic diagrams, so named because of their similarity to orphic art. Several examples of 3D space groups are included, to emphasize the complexity of the growth functions in higher dimensions. A freely available Python library is presented to facilitate the discovery of the growth functions and the generation of orphic diagrams.

Chemistry↗

DOE OSTI2021

A Data-Driven Multi-Period Importance Sampling Strategy for Stochastic Economic Dispatch

Power systems with high penetrations of renewable energy (e.g., wind power) require sophisticated approaches to optimize system performance due to uncertainty in short-term system generation capacity. In this paper, we combine a data-driven analog scenario selection method with importance sampling to create a novel scenario construction approach for two-stage stochastic economic dispatch problems with a large number of wind farms on a network. The proposed method produces scenarios with realistic physics by finding high-fidelity analogs that can describe future states of the system. We show how to extend this method to multi-period operations and demonstrate the effectiveness of this technique by simulating economic dispatch operations on a synthetic test system over the course of a week.

data-driven forecasting↗

DOE OSTI2022

Design, Construction, and Testing of 0.5-m, 18-mm Period Nb 3 Sn Superconducting Undulator Magnets

We report design and fabrication of a new Nb 3 Sn-based superconducting undulator (SCU) are underway at the Advanced Photon Source (APS) of Argonne National Laboratory in collaboration with Fermilab and Lawrence Berkeley National Laboratory. To develop a robust and reliable fabrication process, the magnet development consists of several steps. First, magnetic and mechanical simulations were performed to optimize the magnet design; then, the design matured further by fabricating and testing a series of very short prototypes, ~8 cm long with a period length of 18 mm. These short prototype studies were previously reported. Second, the design was scaled to an intermediate length of ~0.5 m. These two steps led to the final design of ~1.1–m-long magnets, which are currently being fabricated. The quench behavior of each 0.5-m-long undulator magnet, as well as undulator assemblies from these magnets, was studied. The first SCU magnet assembly did not meet the design specifications due to the breakdown of the insulation. With an improved design and fabrication process based on lessons learned, the second SCU assembly achieved the design undulator field of 1.2 T. The design was further optimized, and the third set of magnets was fabricated and successfully tested.

43 PARTICLE ACCELERATORS↗

DOE OSTI2022

Design, Fabrication, and Testing of a 1.9 m Long, 16.5 mm Period NbTi Superconducting Undulator for the Advanced Photon Source Upgrade

Superconducting undulator (SCU) technology has been in use at the Advanced Photon Source since 2013. Due to the successful and reliable operation of the existing SCUs, the Advanced Photon Source upgrade project has decided to expand the use of NbTi-based SCUs. The first new magnets to be designed and fabricated are 1.9 m long with a period length of 16.5 mm. NbTi superconductor is used for coil winding and there are four separate coils wound on the mandrel to produce the main undulator field along with end compensation and distributed dipole compensation. The magnetic design, fabrication details, assembly, and testing are described in detail.

NbTi.↗

DOE OSTI2024

Quench Behavior of 18-mm-Period, 1.1-m-Long Nb 3 Sn Undulator Magnets

A novel Nb 3 Sn-based superconducting undulator (SCU) was developed and integrated into the Advanced Photon Source (APS) at Argonne National Laboratory. The SCU achieved user operation within an accelerator environment. Compared to its Nb-Ti counterpart, the Nb 3 Sn SCU operates at substantially higher currents. Thus, a detailed experimental evaluation of the SCU magnets’ performance was necessary under both “wet” and indirectly cooled conditions to ensure its reliability during operation. Here our study indicated that the cooling method has a noticeable influence on the magnet's behavior. Specifically, energy dissipation in the magnets during quenches was observed to be greater under indirect cooling than with “wet” cooling. This investigation provided insights into the safe operational limits. Guided by these insights the more challenging high-current tests were successfully carried out at the end of the user phase. The SCU achieved the design undulator field of 1.17 T at 820 A and 4.2 K, with a magnetic gap of 9.5 mm and a period of 18 mm. Actual performance exceeded the specifications, reaching 850 A.

43 PARTICLE ACCELERATORS↗

DOE OSTI2023

Promoting Physical Activity During Pregnancy and the Postpartum Period

Introduction Physical activity is important for improving and maintaining overall health across the life span, including during and after pregnancy. Achieving recommended levels of physical activity can be challenging during pregnancy and the postpartum period. The US Office of Disease Prevention and Health Promotion sought to promote physical activity during and after pregnancy through the development of health education materials for the Move Your Way campaign. Research was conducted with pregnant and postpartum people to learn what types of messages and materials would encourage physical activity in these populations. Methods Participants were recruited from 3 regions of the United States to participate in 90‐minute virtual focus groups. Eligible participants were aged 18 years or older and either pregnant or 6 weeks to 1 year postpartum. Participants were asked questions about their beliefs, attitudes, and perceptions about physical activity and prompted to provide feedback on health promotion messages and images. Sessions were recorded, transcribed, and analyzed for key themes. Results Twenty‐four focus groups were conducted with 48 pregnant participants and 52 postpartum participants. Sixteen sessions were conducted in English and 8 were conducted in Spanish. Most participants had questions about how much physical activity is recommended, and many cited their health care provider as a trusted source of information. Participants responded positively to materials that acknowledged the uniqueness of each pregnant or postpartum experience, referenced gradually increasing physical activity levels, highlighted the benefits of physical activity, focused on safety, addressed common barriers, and displayed realistic representations of physical activity. Discussion There is an opportunity to improve messaging about physical activity during and after pregnancy. To better promote physical activity, perinatal health care providers and other health professionals can share information about recommended amounts of physical activity, communicate the benefits, and promote realistic and achievable physical activity messages that address common barriers in these populations.

Nursing↗