Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Oxygen Recovery”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

High Fidelity Simulations of a Methane-Oxygen Rotating Detonation Rocket Engine

The rotating detonation combustor (RDC) is an important realization of pressure gain combustion for practical applications. The RDC system is characterized by a highly unsteady flow field, with multiple reflected pressure waves following the strong detonations and the existence of partially-burnt gases entrained within the detonation annulus during the injector recovery process. While experimental efforts have provided macroscopic properties of an RDC with a given fuel-oxidizer mixture and geometry, limited optical access and reduced lifespan of flow-field diagnostic equipment constrain understanding of the mechanisms that lend to wave stability, controllability, and sustainability. To this end, high-fidelity numerical simulations of the Air Force Research Laboratory (AFRL) methane-oxygen rotating detonation rocket engine (RDRE) are performed to provide detailed insight into the detonation physics and anomalous behavior within the combustor. The results highlight the merit of high-fidelity numerical studies in analyzing the combustion processes and injector dynamics of a complex combustion system. The simulations capture the general wave behavior observed within the experimental studies. Three different operating conditions, with varying global equivalence ratio and system mass flow rate, are considered: (1) baseline configuration, (2) high equivalence ratio, and (3) high mass flow rate. The high mass flow rate case results in increased detonation wave strength whereas the high equivalence ratio results in increased deflagrative heat release. The high equivalence ratio case results in chaotic behavior with two pairs of counter-rotating detonation waves, whereas a single pair of co-rotating waves is observed in the baseline and high mass flow rate cases. Further, parasitic combustion of the reactant mixture ahead of the detonation wave diminishes its strength and reduces propagation speed to approximately 50-60\% of the Chapman-Jouguet (CJ) condition. In this work, a detailed analysis of the detonation wave behavior, injector dynamics, and the statistics of combustion parameters are presented.

Prakash, Supraj↗
DOE OSTI2020

The Effects of Field Line Curvature (FLC) Scattering on Ring Current Dynamics and Isotropic Boundary

Abstract In the ring current dynamics, various loss mechanisms contribute to the ring current decay, including losses to the upper atmosphere through particle precipitation. This study implements the field line curvature (FLC) scattering mechanism in a kinetic ring current model and investigates its role in precipitating ions into the ionosphere during the 17 March 2013 storm. Simulation results indicate that (1) the FLC scattering process exerts on energetic ions on the nightside where the magnetospheric configuration is more stretching. It is more effective on heavy ions (e.g., O + ). These ion losses thereafter lead to a faster recovery of the ring current. (2) The FLC‐associated ion precipitation mainly occurs in the outer region (L > 5 for protons and L > 4.5 for oxygen ions) on the nightside. The O + precipitation takes places in a wider region than protons although its intensity is much lower. Comparisons with POES observations suggest that more proton precipitation is needed in the inner region. This is probably caused by the less stretched configuration in the simulation that prevents more precipitation. It may also imply that other loss process is required in the model such as wave‐particle interactions. (3) The storm time precipitating proton flux of tens of keV due to the FLC scattering sometimes becomes comparable to that of electrons on the nightside, although electrons usually dominate the ionospheric energy deposition from the midnight eastward toward the dayside. (4) The FLC scattering process seems to be capable of explaining the formation of isotropic boundary in the ionosphere during the investigated event.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS2000

Oxidant damage during and after spaceflight

The objectives of this study were to assess oxidant damage during and after spaceflight and to compare the results against bed rest with 6 degrees head-down tilt. We measured the urinary excretion of the F(2) isoprostane, 8-iso-prostaglandin (PG) F(2alpha), and 8-oxo-7,8-dihydro-2 deoxyguanosine (8-OH DG) before, during, and after long-duration spaceflight (4-9 mo) on the Russian space station MIR, short-duration spaceflight on the shuttle, and 17 days of bed rest. Sample collections on MIR were obtained between 88 and 186 days in orbit. 8-iso-PGF(2alpha) and 8-OH DG are markers for oxidative damage to membrane lipids and DNA, respectively. Data are mean +/- SE. On MIR, isoprostane levels were decreased inflight (96. 9 +/- 11.6 vs. 76.7 +/- 14.9 ng. kg(-1). day(-1), P < 0.05, n = 6) due to decreased dietary intake secondary to impaired thermoregulation. Isoprostane excretion was increased postflight (245.7 +/- 55.8 ng. kg(-1). day(-1), P < 0.01). 8-OH DG excretion was unchanged with spaceflight and increased postflight (269 +/- 84 vs 442 +/- 180 ng. kg(-1). day(-1), P < 0.05). On the shuttle, 8-OH DG excretion was unchanged in- and postflight, but 8-iso-PGF(2alpha) excretion was decreased inflight (15.6 +/- 4.3 vs 8.0 +/- 2.7 ng. kg(-1). day(-1), P < 0.05). No changes were found with bed rest, but 8-iso-PGF(2alpha) was increased during the recovery phase (48.9 +/- 23.0 vs 65.4 +/- 28.3 ng. kg(-1). day(-1), P < 0.05). The changes in isoprostane production were attributed to decreased production of oxygen radicals from the electron transport chain due to the reduced energy intake inflight. The postflight increases in the excretion of the products of oxidative damage were attributed to a combination of an increase in metabolic activity and the loss of some host antioxidant defenses inflight. We conclude that 1) oxidative damage was decreased inflight, and 2) oxidative damage was increased postflight.

Mir Project↗
NASA NTRS2002

Evaluation of Small Mass Spectrometer Systems

This work is aimed at understanding the aspects of designing a miniature mass spectrometer (MS) system. A multitude of commercial and government sectors, such as the military, environmental agencies and industrial manufacturers of semiconductors, refrigerants, and petroleum products, would find a small, portable, rugged and reliable MS system beneficial. Several types of small MS systems are evaluated and discussed, including linear quadrupole, quadrupole ion trap, time of flight and sector. The performance of each system in terms of accuracy, precision, limits of detection, response time, recovery time, scan rate, volume and weight is assessed. A performance scale is setup to rank each systems and an overall performance score is given to each system. All experiments involved the analysis of hydrogen, helium, oxygen and argon in a nitrogen background with the concentrations of the components of interest ranging from 0-5000 part-per-million (ppm). The relative accuracies of the systems vary from < 1% to approx. 40% with an average below 10%. Relative precisions varied from 1% to 20%, with an average below 5%. The detection limits had a large distribution, ranging from 0.2 to 170 ppm. The systems had a diverse response time ranging from 4 s to 210 s as did the recovery time with a 6 s to 210 s distribution. Most instruments had scan times near, 1 s, however one instrument exceeded 13 s. System weights varied from 9 to 52 kg and sizes from 15 x 10(exp 3)cu cm to 110 x 10(exp 3) cu cm.

Arkin, C. Richard↗
DOE OSTI2023

Redox-Based Chemical Looping Large-Scale Air Separation Unit Designs Using Perovskite Material

Oxygen production by means of air separation through redox cycle reactions of Sr 1–x Ca x FeO 3-δ perovskite particles is examined numerically in the context of modular large-scale units. Fixed-bed, multicomponent reactor designs allowing for the recovery of the energy released by the exothermic oxidation (or adsorption) to enhance the endothermic reduction (or desorption) of the perovskite material are considered and compared against a baseline cylindrical packed bed. Numerically, the gas–solid reacting system is approximated as a single-phase reacting gas flow through a porous medium of constant porosity. The redox kinetics account for the oxygen nonstoichiometry of the perovskite, which exhibits a dependence on the temperature and the oxygen partial pressure, in order to describe some mechanisms of the oxygen vacancies. Results show that the spontaneous release of the oxygen from the lattice arrangements, through the thermal management of the heat of the oxidation reaction from the geometrical design of the reactors, can be enhanced up to 4% with respect to the baseline oxygen production of 0.201 g O 2 ·h –1 ·g perovskite –1 with the cylindrical packed bed, in the condition of operations in this work, at 500 °C. Sensitivity to the operation temperature showed that the oxygen production is greatly enhanced by approximately 30% with the increase of the temperature from 500 to 550 °C. We report this result is consistent with experimental observations of faster release of the oxygen from the lattice arrangements of this perovskite at 550 °C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Understanding the Adsorption of Rare-Earth Elements in Oligo-Grafted Mesoporous Carbon

Rare-earth elements (REEs) are 17 elements of the periodic table primarily consisting of lanthanides. In modern society, the usage of REEs is ubiquitous in almost all modern gadgets and therefore efficient recovery and separation of REEs are of high importance. Selective adsorption and chelation of REEs in solid sorbents is a unique and sustainable process for their recovery. In this work, single-stranded oligos with 100 units of thymine were grafted onto carboxylated mesoporous carbon to synthesize a sorbent with phosphorus and oxygen functionalities. Additionally, the sorbent was characterized by X-ray photoelectron spectroscopy, Fourier-transform infrared spectroscopy, and scanning electron microscopy-energy-dispersive X-ray spectroscopy. Three different REEs with varying atomic radii and densities, Lu, Dy, and La, were adsorbed onto the carbon from aqueous solutions. It was observed that the adsorbed amounts increased with the increase in the atomic radius or decrease in the atomic density. Calculation of the distribution coefficients for all the equilibrium adsorption amounts suggested that adsorption is more effective in the lower concentration region. The L 3 -edge X-ray absorption near-edge structure confirmed a 3+ oxidation state of REEs in the adsorbed phase. Extended X-ray absorption fine structure (EXAFS) confirmed the binding of REEs with oxygen functionalities in the adsorbed phase. The radial distribution functions calculated from the EXAFS data suggest a longer RE–O distance for La compared to those for Lu and Dy. The coordination numbers and Debye–Waller factors have typical values of about 8–9 atoms and 0.01–0.02 Å 2 , respectively.

36 MATERIALS SCIENCE↗
NASA NTRS1975

Isolation and removal of waste products

Methods of isolation and elimination of waste products in spacecraft cabins are described. The role of waste products in the environment, collection and transport of waste products to storage containers, or to recovery systems, preservation of waste products, and storage and removal of waste products are among the factors discussed. Regeneration of the waste products to recover water and/or oxygen, is briefly considered.

Borshchenko, V. V.↗
NASA NTRS1990

Development of a fuel cell for the EMU

The fuel cell technology for the advanced portable life support system is reviewed, using the breadboard test data, and the design concepts are presented for the development of the improved preprototype fuel cell. Subscale test results confirm the suitability of the solid polymer electrolyte fuel cell fueled by hydride stored hydrogen and oxygen for extravehicular mobility unit (EMU) power generation. Issues verified include passive, zero-G product water removal, nonventing operation in the EMU duty cycle, and complete recovery of product water in potable form. The long cycle life and quick rechargeability are confirmed in 600 h of testing including 150 deep discharge cycles.

Beckstrom, Paula↗
DOE OSTI2021

Performance of a Natural Gas Solid Oxide Fuel Cell System With and Without Carbon Capture

The fuel cell program at the United States Department of Energy (DOE) National Energy Technology Laboratory (NETL) is focused on the development of low-cost, highly efficient, and reliable fossil-fuel-based solid oxide fuel cell (SOFC) power systems that can generate environmentally-friendly electric power with at least 90 percent carbon capture. NETL’s SOFC technology development roadmap is aligned with near-term market opportunities in the distributed generation sector to validate and advance the technology while paving the way for utility-scale natural gas (NG)- and coal-derived synthesis gas-fueled applications via progressively larger system demonstrations. The present study represents a part of a series of system evaluations being carried out at NETL to aid in prioritizing technological advances along research pathways to the realization of utility-scale SOFC systems, a transformational goal of the fuel cell program. In particular, the system performance of utility-scale NG fuel cell (NGFC) systems with and without carbon dioxide (CO2) capture is presented. The NGFC system analyzed features an external auto-thermal reformer (ATR) feeding the fuel to the SOFC system consisting of planar anode-supported SOFC with separated anode and cathode off-gas streams. In systems with CO2 capture, an air separation unit (ASU) is used to provide the oxygen for the ATR and for the combustion of unutilized fuel in the SOFC anode exhaust along with a CO2 purification unit to provide a nearly pure CO2 stream suitable for transport for usage in enhanced oil recovery operations or for storage in underground saline formations. Remaining thermal energy in the exhaust gases is recovered in a bottoming steam Rankine cycle while supplying any process heat requirements. A reduced order model (ROM) developed at the Pacific Northwest National Laboratory (PNNL) is used to predict the SOFC performance. The ROM, while being computationally effective for system studies, provides other detailed information about the state of the stack, such as the internal temperature gradient, generally not available from simple performance models often used to represent the SOFC. Such additional information can be important in system optimization studies to preclude operation under off-design conditions that can adversely impact overall system reliability. The NGFC system performance was analyzed by varying salient system parameters, including the percent of internal (to the SOFC module) NG reformation—ranging from 0 to 100 percent—fuel utilization, and current density. The impact of advances in underlying SOFC technology on electrical performance was also explored.

solid oxide fuel cell (SOFC), natural gas fuel cel↗
DOE OSTI2025

A fast computational framework for the design of solvent-based plastic recycling processes

Multicomponent plastics cannot be processed using mechanical recycling technologies, hindering efforts to deal with plastic waste. Multicomponent plastics include multilayer plastic films, which are widely used for food and healthcare packaging. Multilayer films combine several layers (potentially dozens) of different polymers to protect products from external factors (e.g., oxygen, water, temperature, shock, and light). Solvent-based separation processes have emerged as a promising alternative to recycle these complex materials. For instance, the Solvent-Targeted Recovery and Precipitation (STRAP TM ) process uses sequential solvent washes to selectively dissolve and separate constituent polymers from multicomponent plastic waste, including films. STRAP TM process design (separation sequence, type of solvents, and operating conditions) changes significantly depending on the design of the multilayer plastic film (e.g., number, types, and proportions of polymers). The ability to quickly quantify the economic and environmental benefits of diverse STRAP TM process designs is essential to accelerate the development of sustainable recycling processes and more recyclable multilayer film products. In this work, we present a fast computational framework that integrates molecular-scale models, process modeling, and techno-economic and life cycle analysis to quickly evaluate STRAP TM designs. The computational framework is general and can be used to study the processing of complex multilayer plastic waste streams that contain many layers. Furthermore, we highlight the different uses of the framework via targeted case studies.

Computational framework↗
DOE OSTI2021

High-efficiency catalytic reduction of residual oxygen for purification of carbon dioxide streams from high-pressure oxy-combustion systems

Pressurized oxy-combustion is a promising technology for carbon capture, utilization, and storage. For the captured CO 2 to be used for enhanced oil recovery or stored in geological formations, flue gas impurities, including residual O 2 in the CO 2 stream, must be purified to meet the purity specifications. A catalytic approach to reducing residual O 2 with CH 4 was investigated in this study. Five CoMn- and Cu-based catalysts were synthesized or acquired, and a reverse-flow fixed-bed reactor was used to assess their performance for O 2 removal from a simulated oxy-combustion flue gas at 15 bar. The impacts of the operating parameters on O 2 removal, such as temperature, gas hourly space velocity, O 2 /CH 4 ratio, and gas pressure, were investigated. Among the tested catalysts, the two CoMn catalysts were superior in both activity and selectivity, with the reaction lighting off at about 350 °C and achieving 99% O 2 removal at about 500 °C. Finally, the kinetics of the catalytic reaction is discussed, and the Mars–van Krevelen redox mechanism is deemed valid for describing the reaction pathway for the top-performing CoMn catalysts. The catalytic reaction was determined to be first order in CH 4 and zero order in O 2 under the test conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1982

Effect of exercise on the pseudodiabetes of bed rest

The effect of intensive isotonic exercise and isometric exercise (with its low metabolic rate) during bed rest on plasma insulin and glucose tolerance test was investigated. The subjects were seven healthy men, 19 to 22 years in age, 166 to 188 cm in height, and 62.40 to 103.80 kg in weight; maximal oxygen uptakes ranged from 3.36 to 4.38 liters/min. It appears that bed-rest-induced glucose intolerance is diminished with increasing energy expenditure during both bed rest and recovery.

Greenleaf, J. E.↗
DOE OSTI2021

Representing methane emissions from wet tropical forest soils using microbial functional groups constrained by soil diffusivity

Tropical ecosystems contribute significantly to global emissions of methane (CH 4 ), and landscape topography influences the rate of CH 4 emissions from wet tropical forest soils. However, extreme events such as drought can alter normal topographic patterns of emissions. Here we explain the dynamics of CH 4 emissions during normal and drought conditions across a catena in the Luquillo Experimental Forest, Puerto Rico. Valley soils served as the major source of CH 4 emissions in a normal precipitation year (2016), but drought recovery in 2015 resulted in dramatic pulses in CH 4 emissions from all topographic positions. Geochemical parameters including (i) dissolved organic carbon (C), acetate, and soil pH and (ii) hydrological parameters like soil moisture and oxygen (O 2 ) concentrations varied across the catena. During the drought, soil moisture decreased in the slope and ridge, and O 2 concentrations increased in the valley. We simulated the dynamics of CH 4 emissions with the Microbial Model for Methane Dynamics-Dual Arrhenius and Michaelis–Menten (M3D-DAMM), which couples a microbial functional group CH 4 model with a diffusivity module for solute and gas transport within soil microsites. Contrasting patterns of soil moisture, O 2 , acetate, and associated changes in soil pH with topography regulated simulated CH 4 emissions, but emissions were also altered by rate-limited diffusion in soil microsites. Changes in simulated available substrate for CH 4 production (acetate, CO 2 , and H 2 ) and oxidation (O 2 and CH 4 ) increased the predicted biomass of methanotrophs during the drought event and methanogens during drought recovery, which in turn affected net emissions of CH 4 . A variance-based sensitivity analysis suggested that parameters related to aceticlastic methanogenesis and methanotrophy were most critical to simulate net CH 4 emissions. This study enhanced the predictive capability for CH 4 emissions associated with complex topography and drought in wet tropical forest soils.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1991

Recovery of reflectance from imaging spectrometer measured radiance using a radiative transfer code

Radiance data were acquired over part of the Clark Mountain Range, California in 1990 by the Airborne Visible Infrared Imaging Spectrometer (AVIRIS). From these calibrated radiance data, the lateral distribution of water vapor in precipitable mm was recovered through analysis of the 940 nm water absorption. Surface pressure height was calculated from the 760 nm oxygen absorption band in the AVIRIS data. Surface slopes are estimated from relative elevations derived from the equivalent water vapor elevation for a standard atmosphere. Atmospheric optical depths measured at the Mountain Pass site in these data are extended to the entire region and varied based on the calculated surface pressure elevation. These parameters, derived from every AVIRIS spatial element, are used to constrain the LOWTRAN 7 radiative transfer code for the recovery of surface reflectance. Once transformed to reflectance, the imaging spectrometer data may be analyzed quantitatively for determination of surface composition, and compared with reflectance measurements acquired from different locations, times, and instruments.

Green, Robert O.↗
DOE OSTI2021

Catalytic Reduction of Residual Oxygen for the Purification of Carbon Dioxide Streams from Pressurized Oxy-Combustors

Pressurized oxy-combustion (OC) is regarded as an energy-efficient alternative to atmospheric OC. To utilize the captured carbon dioxide (CO2) from pressurized OC for enhanced oil recovery or carbon storage in geological formations, the CO2 product stream must meet the required purity specifications. One major impurity in OC flue gases is residual O2 (e.g., 3 vol%). In this study, a catalytic approach has been investigated to remove the residual O2 through a reduction reaction with injected methane (CH4) in a reverse-flow fixed-bed (RFFB) reactor. The performance was tested for a supported copper (Cu)-based catalyst synthesized by incipient wetness impregnation and a cobalt-manganese (CoMn) oxide catalyst synthesized by a coprecipitation method. A commercial Cu-based catalyst was also studied as the reference. Experimental results revealed that under the reverse-flow operation, the temperature profiles in the reactor were symmetrical on both sides of the catalyst zone and were more homogenous than those under the conventional one-direction-flow operation. Among the tested catalysts, the CoMn catalyst was the most reactive for promoting the reduction of O2 with CH4, able to attain >95% O2 removal at 475 °C and a gas hourly space velocity (GHSV) of 18,000 h-1 with a feed gas containing 3 vol% O2. Under all experiments, the concentrations of carbon monoxide (CO) were lower than 30 ppmv in the effluent gas streams. The reaction between O2 and CH4 could be depicted by using the Mars–van Krevelen redox mechanism based on a two-step reduction–oxidation reaction pathway.

36 MATERIALS SCIENCE↗
NASA NTRS2001

Ischemia causes muscle fatigue

The purpose of this investigation was to determine whether ischemia, which reduces oxygenation in the extensor carpi radialis (ECR) muscle, causes a reduction in muscle force production. In eight subjects, muscle oxygenation (TO2) of the right ECR was measured noninvasively and continuously using near infrared spectroscopy (NIRS) while muscle twitch force was elicited by transcutaneous electrical stimulation (1 Hz, 0.1 ms). Baseline measurements of blood volume, muscle oxygenation and twitch force were recorded continuously, then a tourniquet on the upper arm was inflated to one of five different pressure levels: 20, 40, 60 mm Hg (randomized order) and diastolic (69 +/- 9.8 mm Hg) and systolic (106 +/- 12.8 mm Hg) blood pressures. Each pressure level was maintained for 3-5 min, and was followed by a recovery period sufficient to allow measurements to return to baseline. For each respective tourniquet pressure level, mean TO2 decreased from resting baseline (100% TO2) to 99 +/- 1.2% (SEM), 96 +/- 1.9%, 93 +/- 2.8%, 90 +/- 2.5%, and 86 +/- 2.7%, and mean twitch force decreased from resting baseline (100% force) to 99 +/- 0.7% (SEM), 96 +/- 2.7%, 93 +/- 3.1%, 88 +/- 3.2%, and 86 +/- 2.6%. Muscle oxygenation and twitch force at 60 mm Hg tourniquet compression and above were significantly lower (P < 0.05) than baseline value. Reduced twitch force was correlated in a dose-dependent manner with reduced muscle oxygenation (r = 0.78, P < 0.001). Although the correlation does not prove causation, the results indicate that ischemia leading to a 7% or greater reduction in muscle oxygenation causes decreased muscle force production in the forearm extensor muscle. Thus, ischemia associated with a modest decline in TO2 causes muscle fatigue.

Non-NASA Center↗
DOE OSTI2025

Incorporation of Oxygen Carrier Recycle into Large-Scale Production of Cu-Based Oxygen Carriers

One of the greatest challenges in the chemical looping combustion (CLC) of solid fuels is developing an oxygen carrier material that is reactive and attrition resistant and can be prepared at a reasonable cost. Recent efforts in oxygen carrier development have followed two primary approaches: (1) using natural ores, such as ilmenite, or (2) developing highly attrition-resistant and reactive synthetic materials. Both approaches have shortcomings, namely, the low reactivity and incompatibility of ores with solid fuel CLC and the high cost and low durability of synthetic materials. Here, a different approach is taken where attrition is assumed inevitable and the recycling of spent oxygen carrier materials is incorporated into oxygen carrier manufacture. For solid fuel CLC, Cu-based oxygen carriers are attrited and are collected with fly ash. Copper oxides are more reactive with nitric acid than most ash materials, meaning that a copper-nitrate-rich leachate can be generated. This copper nitrate stream could then be reused in oxygen carrier synthesis by impregnation. For proof of concept, leaching experiments were conducted to verify that copper oxides are selectively leached from ash-containing spent oxygen carriers. Several cases for process design are proposed based on the composition of spent materials, as the degree of copper oxidation and type of solid fuel dictate leaching residence times and general processing intensity. The four stages proposed here include impurity removal, copper leaching and recovery, solid–liquid separation, and evaporation/concentrating. The resulting process should be able to recover up to 95% of copper while minimizing inclusion of undesirable ash-based impurities.

anions↗