SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This slide presentation focuses on how the Next Generation Air Space System can assist in reducing environmental pollution and reduced fuel consumption. By modifying some of the current aviation practices such as the dive and drive descent and making more efficient air traffic flow, the new system can assist in noise reduction, emissions reductions and reduce delays in routing and improve operational efficiency
The envisioned future of Advanced Air Mobility involves low-altitude operation of a new class of air vehicles. The low altitudes of the flight paths would have these vehicles spending most of their operation in conditions where unpredictable wind and turbulence effects may occur. Wind measurements will hence be critical to ensure safe and efficient operations for AAM. Such wind measurement could be used as a monitoring system for warning of hazardous wind events, as data input to forecasting models, or as a research tool to understand wind effects in complex environments. To meet this need NASA is evaluating wind sensing technologies with a capability to probe the atmospheric boundary layer. Doppler lidar is a leading candidate ground-based sensor, as shown by the decades-long history of being an effective tool for many wind studies. However, there is a need to re-assess the Doppler wind lidars for the AAM application which involves evaluating wind effects as vehicles operate in and out of vertiports, notably regarding spatial resolution. Meeting the needs for spatial resolution may involve the use of dual-Doppler techniques, rather than just single Doppler lidar. The study was furthermore motivated by looking toward the future of AAM, in which the air vehicles involved can also provide wind measurements. Airborne wind measurements, obtained directly from vehicle-mounted anemometers or indirectly from vehicle navigation data, offer a means to compare remotely sensed wind lidar with in-situ measurements. The following sections report on results of wind measurements obtained using lidar and the small uninhabited aircraft systems (sUAS’s) operating in the same volume of air.
RePED is a novel prototype alternator that has been designed and built to operate at 35 kW under 250 degrees C ambient temperature conditions. The operating efficiency will be measured using a 225-kW motor to drive the machine in a back-to-back configuration. The goal is to determine if the RePED alternator can deliver 35 kW at a rotational speed of 1,000 rpm while operating in 250 degrees C ambient temperature and have a minimum efficiency of 60%. Dynamometer testing of a high-temperature alternator for geothermal drilling presents several unique challenges, especially around maintaining and managing the various sources and types of energy passing through the system without impacting data quality. The objectives of this report are to (1) describe the test stand in detail, the relative orientation of each major component, and the data acquisition system and (2) discuss the behavior of the test stand components such that this report can serve as a reference document for future projects.
Researchers at the NASA Glenn Research Center, in collaboration with industry, are reducing gas turbine engine emissions by studying visually the air-fuel interactions and combustion processes in combustors. This is especially critical for next generation engines that, in order to be more fuel-efficient, operate at higher temperatures and pressures than the current fleet engines. Optically based experiments were conducted in support of the Ultra-Efficient Engine Technology program in Glenn's unique, world-class, advanced subsonic combustion rig (ASCR) facility. The ASCR can supply air and jet fuel at the flow rates, temperatures, and pressures that simulate the conditions expected in the combustors of high-performance, civilian aircraft engines. In addition, this facility is large enough to support true sectors ("pie" slices of a full annular combustor). Sectors enable one to test true shapes rather than rectangular approximations of the actual hardware. Therefore, there is no compromise to actual engine geometry. A schematic drawing of the sector test stand is shown. The test hardware is mounted just upstream of the instrumentation section. The test stand can accommodate hardware up to 0.76-m diameter by 1.2-m long; thus sectors or small full annular combustors can be examined in this facility. Planar (two-dimensional) imaging using laser-induced fluorescence and Mie scattering, chemiluminescence, and video imagery were obtained for a variety of engine cycle conditions. The hardware tested was a double annular sector (two adjacent fuel injectors aligned radially) representing approximately 15 of a full annular combustor. An example of the two-dimensional data obtained for this configuration is also shown. The fluorescence data show the location of fuel and hydroxyl radical (OH) along the centerline of the fuel injectors. The chemiluminescence data show C2 within the total observable volume. The top row of this figure shows images obtained at an engine low-power condition, and the bottom row shows data from a higher power operating point. The data show distinctly the differences in flame structure between low-power and high-power engine conditions, in both location and amount of species produced (OH, C2) or consumed (fuel). The unique capability of the facility coupled with its optical accessibility helps to eliminate the need for high-pressure performance extrapolations. Tests such as described here have been used successfully to assess the performance of fuel-injection concepts and to modify those designs, if needed.
The Lightweight Surface Manipulation System, or LSMS, is a family of scalable long-reach cable-actuated manipulators. The design of the LSMS has a high payload ratio for efficient operations on planetary surfaces like the Moon or Mars. The LSMS has nonlinear, coupled, and hybrid dynamics. The engineering decisions that led to these challenging dynamics make this structure light and efficient. This paper proposes a novel trajectory tracking algorithm for these cranes that facilitates precise autonomous and teleoperated operations. This algorithm enables these robots to follow complex trajectories that avoid obstacles and pickup regolith in a construction site.
The Lightweight Surface Manipulation System, or LSMS, is a family of scalable long-reach cable-actuated manipulators. The design of the LSMS has a high payload ratio for efficient operations on planetary surfaces like the Moon or Mars. The LSMS has nonlinear, coupled, and hybrid dynamics. The engineering decisions that led to these challenging dynamics make this structure light and efficient. This paper proposes a novel trajectory tracking algorithm for these cranes that facilitates precise autonomous and teleoperated operations. This algorithm enables these robots to follow complex trajectories that avoid obstacles and pickup regolith in a construction site.
The South Pole Telescope Shirokoff Line Intensity Mapper (SPT-SLIM) is a millimeter-wave line-intensity mapping experiment, deployed on the South Pole Telescope (SPT) during the 2024-2025 Austral Summer season. This pathfinder experiment serves to demonstrate the on-sky operation of multi-pixel on-chip spectrometer technology. We present on the cryogenic performance of the SPT-SLIM receiver for this Year 1 observing campaign. The SPT-SLIM receiver utilizes an Adiabatic Demagnetization Referigerator (ADR) for cooling the focal plane of superconducting filterbank spectrometers to a temperature of 150mK. We demonstrate stable thermal performance of the focal plane module during observing operations in line with thermal modelling, enabling a cryogenic operation efficiency above 80%. We also report on the receiver control system design utilizing the Observatory Control System (OCS) platform for automated cryogenic operation on the SPT.
Major advances in space power technology are being made in photovoltaic, solar thermal, and nuclear systems. Despite these advances, the power systems required by the energy and power intensive mission of the future will be massive due to the large collecting surfaces, large thermal management systems, and heavy shielding. Reducing this mass on board the space vehicle can result in significant benefits because of the high cost of transporting and moving mass about in space. An approach to this problem is beaming the power from a point where the massiveness of the power plant is not such a major concern. The viability of such an approach was already investigated. Efficient microwave power beam transmission at 2.45 GHz was demonstrated over short range. Higher frequencies are desired for efficient transmission over several hundred or thousand kilometers in space. Superconducting DC-RF conversion as well as RF-DC conversion offers exciting possibilities. Multivoltage power conditioning for multicavity high power RF tubes could be eliminated since only low voltages are required for Josephson junctions. Small, high efficiency receivers may be possible using the reverse Josephson effects. A conceptual receiving antenna design using superconducting devices to determine possible system operating efficiency is assessed. If realized, these preliminary assessments indicate a role for superconducting devices in millimeter and submillimeter free space power transmission systems.
Orbiting 380 miles above the earth, NASA s Hubble Space Telescope (HST) has returned a wealth of scientific data about our universe and galaxies beyond highlighted by spectacular images of the birth and death of stars, colliding galaxies, and other extra-worldly events. Despite its tremendous success for almost two decades, the HST ground support system experienced down-to-earth problems prior to the turn of the century, namely budgetary ones. To keep HST operating efficiently to 201 2 and beyond, the Vision 2000 project was conceived with the primary goal of substantially reducing the costs of operating and maintaining the spacecraft ground systems. Taking advantage of this atypical management opportunity, a set of Product Development Teams (PDTs) were established, whose charter was to re-engineer the ground system, and in doing so, reduce the remaining life-of-mission operating and maintenance costs, while providing improved reliability and increased capabilities.
NextGen has begun the modernization of the nation’s air transportation system, with goals to improve system safety, increase operation efficiency and capacity, provide enhanced predictability, resilience and robustness. With these improvements, NextGen is poised to handle significant increases in air traffic operations, more than twice the number recorded in 2016, by 2025.1 NextGen is evolving toward collaborative decision-making across many agents, including automation, by use of a Net-Centric architecture, which in itself creates a very complex environment in which the navigation and operation of aircraft are to take place. An intricate environment such as this, coupled with the expected upsurge of air traffic operations generates concern respecting the ability of the human-agent to both fly and manage aircraft within. Therefore, it is both necessary and practical to begin the process of increasingly autonomous systems within the cockpit that will act independently to assist the human-agent achieve the overall goal of NextGen. However, the straightforward technological development and implementation of intelligent machines into the cockpit is only part of what is necessary to maintain, at minimum, or improve human-agent functionality, as desired, while operating in NextGen. The full integration of Increasingly Autonomous Systems (IAS) within the cockpit can only be accomplished when the IAS works in concert with the human, formulating trust between the two, thereby establishing a team atmosphere. Imperative to cockpit implementation is ensuring the proper performance of the IAS by the development team and the human-agent with which it will be paired when given a specific piloting, navigation, or observational task. Described in this paper are the steps taken, at NASA Langley Research Center, during the second and third phases of the development of an IAS, the Traffic Data Manager (TDM), its verification and validation by human-agents, and the foundational development of Human Autonomy Teaming (HAT) between the two.
The South Pole Telescope Shirokoff Line Intensity Mapper (SPT-SLIM) is a millimeter-wavelength line-intensity mapping experiment, which was deployed on the South Pole Telescope (SPT) during the 2024-2025 Austral summer season. This pathfinder experiment serves to demonstrate the on-sky operation of multi-pixel on-chip spectrometer technology. We report on the cryogenic performance of the SPT-SLIM receiver for the first year of commissioning observations. The SPT-SLIM receiver utilizes an Adiabatic Demagnetization Refrigerator (ADR) for cooling the focal plane of superconducting filterbank spectrometers to a temperature of 150 mK. We demonstrate stable thermal performance of the focal plane module during observations consistent with thermal modeling, enabling a cryogenic operating efficiency above 80%. We also report on the receiver control system design utilizing the Observatory Control System (OCS) platform for automated cryogenic operation on the SPT.
Urban Air Mobility (UAM) is set to transform transportation in densely populated regions like the San Francisco Bay Area. This paper introduces an innovative simulation approach to explore large-scale UAM scenarios, emphasizing the use of distributed sensing to enhance operational efficiency and safety. The Revolutionary Vertical Lift Technology (RVLT) model is employed as the framework for simulating complex interactions among multiple vehicles within urban landscapes. Strategically deployed ground sensor nodes enable distributed sensing, enhancing situational awareness and operational effectiveness. By integrating empirical data and geographical realism, the simulations provide a systematic analysis of the feasibility, efficiency, and safety considerations associated with UAM deployment in urban environments. Factors such as air traffic density and infrastructural requirements are thoroughly examined, offering actionable insights for policymakers and industry stakeholders. This paper aims to refine the structure and scenarios for large-scale simulations based on distributed sensing, thereby contributing to the advancement of UAM operations.
Urban Air Mobility (UAM) is set to transform transportation in densely populated regions like the San Francisco Bay Area. This paper introduces an innovative simulation approach to explore large-scale UAM scenarios, emphasizing the use of distributed sensing to enhance operational efficiency and safety. The Revolutionary Vertical Lift Technology (RVLT) model is employed as the framework for simulating complex interactions among multiple vehicles within urban landscapes. Strategically deployed ground sensor nodes enable distributed sensing, enhancing situational awareness and operational effectiveness. By integrating empirical data and geographical realism, the simulations provide a systematic analysis of the feasibility, efficiency, and safety considerations associated with UAM deployment in urban environments. Factors such as air traffic density and infrastructural requirements are thoroughly examined, offering actionable insights for policymakers and industry stakeholders. This paper aims to refine the structure and scenarios for large-scale simulations based on distributed sensing, thereby contributing to the advancement of UAM operations.
The rapid increase in electric vehicle (EV) adoption demands enhancements in the efficiency and adaptability of EV supply equipment (EVSE). Traditional EVSE systems often fail to optimize power delivery to meet the variable acceptance rates of EV batteries, resulting in significant energy wastage and reduced operational efficiency. This research addresses these challenges by integrating queuing theory with modular EVSE architectures, offering a dual strategy to optimize the operation of EV charging stations. A simulation model was developed to assess various configurations of charger capacities and outlet numbers. This model aimed to identify the optimal setup that maximizes station utilization while minimizing charging times and maximizing throughput. The model focused on charger capacities ranging from 50 to 250 kW and analyzed the different capacities’ effects on charging times and the number of vehicles served. The results indicate that a charger capacity of 125 kW is optimal, striking a balance between the charging time and the number of EVs served per hour, thus achieving the highest station utilization rate. This capacity allows for servicing a significant number of EVs with moderate increases in charging times. Lower capacities, although capable of serving more vehicles, lead to longer charging times and decreased throughput efficiency. The study underscores the effectiveness of combining queuing theory with flexible, modular charging systems that can dynamically adjust to EV charging demands.
Like other industrial processes, the production of metallic nuclear fuels (MNF) requires that fabrication facilities be able to reliably meet production demands, operate efficiently, and adhere to federal and local safety regulations. In turn, the set of design variables employed by such a facility, such as operations policies, infrastructure and machinery purchased, and the type and number of staff hired, directly impact a facility’s ability to satisfy these goals. Therefore, facility designers must carefully determine which set of design variable values optimally satisfies these constraints. In this paper, we explore how values for these high-level design variables, namely hiring requirements, can be determined in the context of nuclear fuel manufacturing through the coupling of physics-based and discrete-event simulation technologies. Using the Versatile Test Reactor (VTR) program as a case study, we demonstrate how SCALE and MCNP nuclear physics model outputs can be integrated into ExtendSim discrete-event simulation (DES) models of the fuel fabrication process to determine the optimal number of staff hired to ensure fuel production goals are met, operations comply with effective dose limit regulations, and overall project costs are reduced.
Airports are on the front line of significant innovations, allowing the movement of more people and goods faster, cheaper, and with greater convenience. As air travel continues to grow, airports will face challenges in responding to increasing passenger vehicle traffic, which leads to lower operational efficiency, poor air quality, and security concerns. This paper evaluates methods for traffic demand forecasting combined with traffic microsimulation, which will allow airport operations staff to accurately predict traffic and congestion. Using two years of detailed data describing individual vehicle arrivals and departures, aircraft movements, and weather at Dallas-Fort Worth (DFW) International Airport, we evaluate multiple prediction methods including the Auto Regressive Integrated Moving Average (ARIMA) family of models, traditional machine learning models, and DeepAR, a modern recurrent neural network (RNN). We find that these algorithms are able to capture the diurnal trends in the surface traffic, and all do very well when predicting the next 30 minutes of demand. Longer forecast horizons are moderately effective, demonstrating the challenge of this problem and highlighting promising techniques as well as potential areas for improvement. Traffic demand is not the only factor that contributes to terminal congestion, because temporary changes to the road network, such as a lane closure, can make benign traffic demand highly congested. Combining a demand forecast with a traffic microsimulation framework provides a complete picture of traffic and its consequences. The result is an operational intelligence platform for exploring policy changes, as well as infrastructure expansion and disruption scenarios. To demonstrate the value of this approach, we present results from a case study at DFW Airport assessing the impact of a policy change for vehicle routing in high demand scenarios. This framework can assist airports like DFW as they tackle daily operational challenges, as well as explore the integration of emerging technology and expansion of their services into long term plans.
The microwave arcjet thruster uses microwave energy to create a free-floating plasma discharge within a microwave resonant cavity. This discharge typically absorbs 99% of the input power and converts it to thermal energy which is then transferred to the flowing propellant gas. Recent modifications have allowed the thruster to be operated in a fixed configuration where neither the cavity geometry nor the tuning mechanisms are adjusted. The prototype has demonstrated its ability to operate in this fixed configuration using a variety of propellant gases, i.e., nitrogen, helium, ammonia, and hydrogen. The current design is capable of efficient operation over a wide range of power levels (250 W to over 6000 W). Current work is focused on obtaining LIF velocimetry data of the velocity profile at the exit plane of the nozzle.
The purpose of this technical memorandum is to document some of the fundamental considerations in the aerodynamic design of a proprotor blade, which include distributions of twist, chord, and thickness. A proprotor is expected to operate efficiently in different speed regimes, such as hover and forward flight, which presents challenges that are unique from designing either rotors or propellers. Operating in hover and at high advance ratios in cruise present conflicting design requirements on the blade's geometry that must be reconciled with the vehicle's mission. Though a proprotor must also fly in edgewise and other non-axial flight phases, these portions of the mission do not typically drive the proprotor's aerodynamic design. This memorandum describes an approach to integrate a blade's twist and chord distributions to provide an aerodynamic performance estimate that could be coupled with other design considerations, such as acoustics or structures. The intended audience for this memorandum is engineers beginning to work in this discipline who are looking for a primer on the behavior of proprotor performance and design considerations. The memorandum is not intended as a step-by-step guide to designing proprotors, nor does it provide insight into more advanced proprotor design/analysis tools.