Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “O”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2008

The First Detection of [O IV] from an Ultraluminous X-ray Source with Spitzer: Evidence of High Unbeamed Luminosity in Holmberg II ULX

We present the first Spitzer Infrared Spectrograph (IRS) observations of the [O IV] 25.89 micron emission line detected from the ultraluminous X-ray source (ULX) in Holmberg II. This line is a well established signature of high excitation, usually associated with AGN. Its detection suggests that the ULX has a strong impact on the surrounding gas. A Spitzer high resolution spectral map shows that the [O IV] is coincident with the X-ray position of the Holmberg II ULX. We find that the luminosity and the morphology of the line emission is consistent with photoionization by the soft X-ray and far ultraviolet (FUV) radiation from the accretion disk of the binary system and inconsistent with narrow beaming. We show that the emission nebula is radiation bounded both in the line of sight direction and to the west, and probably matter bounded to the east. Evidence for a massive black hole (BH) in this ULX is mounting. Detailed photoionization models favor an intermediate mass black hole of at least 85 Solar Mass as the ionization source for the [OIV] emission. We find that the spectral type of the companion star strongly affects the expected strength of the [O IV] emission. This finding could explain the origin of [O IV] in some starburst galaxies containing black hole binaries.

Berghea, C. T.↗
NASA NTRS2009

The First Detection of [O IV] from an Ultraluminous X-ray Source with Spitzer: Evidence for High Luminosity in Holmberg II ULX - 2

This is the second of two papers examining Spitzer Infrared Spectrograph (IRS) observations of the ultraluminous X-ray source (ULX) in Holmberg II. Here we perform detailed photoionization modeling of the infrared lines. Our analysis suggests that the luminosity and morphology of the [O IV] 25.89 micron emission line is consistent with photoionization by the soft X-ray and far ultraviolet (FUV) radiation from the accretion disk of the binary system and inconsistent with narrow beaming. We show that the emission nebula is matter-bounded both in the line of sight direction and to the east, and probably radiation-bounded to the west. A bolometric luminosity in excess of 10(exp 40) erg/s would be needed to produce the measured [O IV] flux. We use modeling and previously published studies to conclude that shocks likely contribute very little, if at all, to the high-excitation line fluxes observed in the Holmberg II ULX. Additionally, we find that the spectral type of the companion star has a surprisingly strong effect on the predicted strength of the [O IV] emission. This finding could explain the origin of [O IV] in some starburst systems containing black hole binaries.

Berghea, C. T.↗
NASA NTRS2009

The First Detection of [O IV] from an Ultraluminous X-ray Source with Spitzer. II. Evidence for High Luminosity in Holmberg II ULX

This is the second of two papers examining Spitzer Infrared Spectrograph (IRS) observations of the ultraluminous X-ray source (ULX) in Holmberg II. Here we perform detailed photoionization modeling of they infrared lines. Our analysis suggests that the luminosity and morphology of the [O IV] 25.89 micron emission line is consistent with photoionization by the soft X-ray and far ultraviolet (FUV) radiation from the accretion disk of the binary system and inconsistent with narrow beaming. We show that the emission nebula is matter-bounded both in the line of sight direction and to the east, and probably radiation-bounded to the west. A bolometric luminosity in excess of 1040 erg per second would be needed to produce the measured [O IV] flux. We use modeling and previously published studies to conclude that shacks likely contribute very little, if at all, to the high excitation line fluxes observed in the Holmberg II ULX. Additionally, we find that the spectral type of the companion star has a surprisingly strong effect on they predicted strength of the [O IV] emission. This finding could explain the origin of [O IV] hi some starburst systems containing black hole binaries.

Berghea, C. T.↗
NASA NTRS2010

First Detection of the [O(sub III)] 88 Micrometers Line at High Redshifts: Characterizing the Starburst and Narrow-Line Regions in Extreme Luminosity Systems

We have made the first detections of the 88 micrometers [O(sub III)] line from galaxies in the early universe, detecting the line from the lensed active galactic nucleus (AGN)/starburst composite systems APM 08279+5255 at z 3.911 and SMM J02399-0136 at z = 2.8076. The line is exceptionally bright from both systems, with apparent (lensed) luminosities approx.10(exp 11) Solar Luminosity, For APM 08279, the [O(sub III)] line flux can be modeled in a star formation paradigm, with the stellar radiation field dominated by stars with effective temperatures, T(sub eff) > 36,000 K, similar to the starburst found in M82. The model implies approx.35% of the total far-IR luminosity of the system is generated by the starburst, with the remainder arising from dust heated by the AGN. The 881,tm line can also be generated in the narrow-line region of the AGN if gas densities are around a few 1000 cu cm. For SMM J02399, the [O(sub III)] line likely arises from HII regions formed by hot (T(sub eff) > 40,000 K) young stars in a massive starburst that dominates the far-IR luminosity of the system. The present work demonstrates the utility of the [O(sub III)] line for characterizing starbursts and AGN within galaxies in the early universe. These are the first detections of this astrophysically important line from galaxies beyond a redshift of 0.05.s

Ferkinhoff, C.↗
NASA NTRS2010

Altitude Variation of the CO2(V2)-O Quenching Rate Coefficient in Mesosphere and Lower Thermosphere

Among the processes governing the energy balance in the mesosphere and lower thermosphere (MLT), the quenching of CO2(v2) vibrational levels by collisions with oxygen atoms plays an important role. However, the k(CO2-O) values measured in the lab and retrieved from atmospheric measurements vary from 1.5 x 10(exp -12)cu cm/s through 9.0 x 10(exp -12)cu cm/s that requires further studying. In this work we used synergistic data from a ground based lidar and a satellite infrared radiometer to estimate k(CO2-O). We used the night- and daytime temperatures between 80 and 110 km measured by the Colorado State University narrow-band sodium (Na) lidar located at Fort Collins, Colorado (41 N, 255E) as ground truth of the SABER/TIMED nearly simultaneous ( +/-10 minutes) and common volume (within +/-1 degree in latitude, +/-2 degrees in longitude) observations. For each altitude in 80-110 km interval we estimate an 'optimal" value of k(CO2-O) needed to minimize the discrepancy between the simulated 15 micron CO2 radiance and that measured by the SABER/TIMED instrument. The k(CO2-O) obtained in this way varies in altitude from 3.5 x 10(exp -12)cu cm/s at 80 km to 5.2 x 10(exp -12)cu cm/s for altitudes above 95 km. We discuss this variation of the rate constant and its impact on temperature retrievals from 15 pm radiance measurements and on the energy budget of MLT.

Feofilov, A.↗
NASA NTRS2010

Altitude Variation of the CO2 (V2)-O Quenching Rate Coefficient in Mesosphere and Lower Thermosphere

Among the processes governing the energy balance in the mesosphere and lower thermosphere (mlt), the quenching of CO2(N2) vibrational levels by collisions with oxygen atoms plays an important role. However, the k(CO2-O) values measured in the lab and retrieved from atmospheric measurements vary from 1.5 x 10(exp -12) cubic centimeters per second through 9.0 x 10(exp -12) cubic centimeters per second that requires further studying. In this work we used synergistic data from a ground based lidar and a satellite infrared radiometer to estimate K(CO2-O). We used the night- and daytime temperatures between 80 and 110 km measured by the colorado state university narrow-band sodium (Na) lidar located at fort collins, colorado (41N, 255E) as ground truth of the saber/timed nearly simultaneous (plus or minus 10 minutes) and common volume (within plus or minus 1 degree in latitude, plus or minus 2 degrees in longitude) observations. For each altitude in 80-110 km interval we estimate an "optimal" value of K(CO2-O) needed to minimize the discrepancy between the simulated 15 mm CO2 radiance and that measured by the saber/timed instrument. The K(CO2-O) obtained in this way varies in altitude from 3.5 x 10(exp -12) cubic centimeters per second at 80 km to 5.2 x 10(exp -12) cubic centimeters pers second for altitudes above 95 km. We discuss this variation of the rate constant and its impact on temperature retrievals from 15 mm radiance measurements and on the energy budget of mlt.

Feofilovi, Artem↗
NASA NTRS2014

Leak Rate Performance of Silicone Elastomer O-Rings Contaminated with JSC-1A Lunar Regolith Simulant

Contamination of spacecraft components with planetary and foreign object debris is a growing concern. Face seals separating the spacecraft cabin from the debris filled environment are particularly susceptible; if the seal becomes contaminated there is potential for decreased performance, mission failure, or catastrophe. In this study, silicone elastomer O-rings were contaminated with JSC- 1A lunar regolith and their leak rate performance was evaluated. The leak rate values of contaminated O-rings at four levels of seal compression were compared to those of as-received, uncontaminated, O-rings. The results showed a drastic increase in leak rate after contamination. JSC-1A contaminated O-rings lead to immeasurably high leak rate values for all levels of compression except complete closure. Additionally, a mechanical method of simulant removal was examined. In general, this method returned the leak rate to as-received values.

leak rate↗
NASA NTRS2022

Present-Day and Future PM 2.5 and O 3 -Related Global and Regional Premature Mortality in the EVAv6.0 Health Impact Assessment Model

We used the EVAv6.0 system to estimate the present (2015) and future (2015–2050) global PM 2.5 and O 3 -related premature mortalities, using simulated surface concentrations from the GISS-E2.1-G Earth system model. The PM 2.5 -related global premature mortality is estimated to be 4.3 and 4.4 million by the non-linear and linear models, respectively. Ischemic heart diseases are found to be the leading cause of PM 2.5 -related premature deaths, contributing by 35% globally. Both long-term and short-term O 3 -related premature deaths are estimated to be around 1 million, globally. Overall, PM 2.5 and O 3 -related premature mortality leads to 5.3–5.4 million premature deaths, globally. The global burden of premature deaths is mainly driven by the Asian region, which in 2015 contributes by 75% of the total global premature deaths. An increase from 6.2% to 8% in the PM 2.5 relative risk as recommended by the WHO leads to an increase of PM 2.5 -related premature mortality by 28%, to 5.7 million. Finally, bias correcting the simulated PM 2.5 concentrations in 2015 leads to an increase of up to 73% in the global PM 2.5 -related premature mortality, leading to a total number of global premature deaths of up to 7.7 million, implying the necessity of bias correction to get more robust health burden estimates. PM 2.5 and O 3 -related premature mortality in 2050 decreases by up to 57% and 18%, respectively, due to emission reductions alone. However, the projected increase and aging of the population leads to increases of premature mortality by up to a factor of 2, showing that the population exposed to air pollution is more important than the level of air pollutants, highlighting that the population dynamics should be considered when setting up health assessment systems.

Premature mortality↗
NASA NTRS2024

Theoretical Prediction of Thermal Expansion Anisotropy for Y 2 Si 2 O 7 Environmental Barrier Coatings Using a Deep Neural Network Potential and Comparison to Experiment

Environmental barrier coatings (EBCs) are an enabling technology for silicon carbide (SiC)-based ceramic matrix composites (CMCs) in extreme environments such as gas turbine engines. However, development of new coating systems is hindered by the large design space and difficulty in predicting properties for these materials. Density Functional Theory (DFT) has successfully been used to model and predict some thermodynamic and thermo-mechanical properties of high-temperature ceramics for EBCs, although these calculations are challenging due to their high computational costs. In this work, we use machine learning to train a deep neural network potential (DNP) for Y 2 Si 2 O 7 , which is then applied to calculate thermodynamic and thermo-mechanical properties at near-DFT accuracy much faster and using less computational resources than DFT. We use this DNP to predict phonon-based thermodynamic properties of Y 2 Si 2 O 7 with good agreement to DFT and experiments. We also utilize the DNP to calculate the anisotropic, lattice direction-dependent coefficients of thermal expansion (CTEs) for Y 2 Si 2 O 7 . Molecular dynamics trajectories using the DNP correctly demonstrate accurate prediction of the anisotropy of the CTE in good agreement with diffraction experiments. In the future, this DNP could be applied to accelerate additional property calculations for Y 2 Si 2 O 7 compared to DFT or experiments.

rare earth silicates↗
NASA NTRSDate not supplied

A New Era of H-O-C-S Magma Solubility Modeling: Better, Faster, Stronger

H 2 O, CO 2 , and S are the most abundant volatiles in magmatic systems and are critical to understanding magma storage, phase equilibria, and volcanic eruptions. Models that consider all three of these components, however, may not allow for critical examination and adjustment of assumptions underlying the model, or provide benchmark testing or extensible interfaces. Thus, understanding why models produce different results can be challenging. We have gathered authors of established (D-Compress) and recent (VolFe, EVo, Sulfur_X, MAGEC) H-O-C-S volatile solubility models to work together to understand how and why our models diverge. We present a series of benchmark basalt degassing scenarios revealing that often understated model assumptions such as fO 2 buffer equations, fO 2 -Fe 3+ /ΣFe relationships, and even major element normalization routines have outsized effects on model results. All models consider S 2- and S 6+ melt species but with different approaches to sulfate/sulfide capacities, partition coefficients, and species fugacities, leading to divergence in the evolution of modeled gas compositions, melt S and Fe speciation, and fO 2 , with the extent of divergence depending on melt composition. Such scenarios enable meaningful intercomparison of existing models and lay the groundwork for a user-friendly yet powerful solubility modeling framework. Given our wealth of existing solubility literature, we suggest that the field of magmatic volatiles should focus now on the creation of modern tools and the modular implementation of existing model equations or methods, and that the evaluation of code usability, transparency, and benchmarking should be codified pillars of the peer-review process. As an example of such an endeavor, we present early work coupling these sulfur solubility models with VESIcal, an extensible and rigorously tested python library containing seven existing H 2 O-CO 2 solubility models. VESIcal includes the ability to extract, edit, and even interchange assumptions underlying any model. For example, users may combine or swap separately published H 2 O, CO 2 , and S models, as well as underlying model choices, such as Equations of State and redox models.

volatiles in magmas↗
NASA NTRS1979

An experimental and theoretical study of the mean diurnal variation of O/+/, NO/+/, O2/+/, and N2/+/ ions in the mid-latitude F1 layer of the ionosphere

A theoretical model of the diurnal variations in the compositions of the ions O(+), NO(+), O2(+) and N2(+) in the midlatitude F1 layer is presented and compared with measurements made by AE-C. The theoretical model includes the rate coefficients and branching ratios for the dissociative recombination of NO(+), O2(+) and N2(+) with electrons and the ion-atom interchanges of O(+) with N2 and N2(+) with O. Input parameters to the model comprise measurements of ion and electron temperatures, neutral atmosphere composition, the solar EUV flux and the photoelectron spectrum. In general, model calculations are found to agree with satellite measurements, confirming the major ion sources and sinks of the photochemical model, which has an accuracy of + or - 60%.

Torr, D. G.↗
NASA NTRS1983

The solar O III spectrum. II - Longer wavelengths, line widths, and the He II Lyman alpha radiation field

The solar O III spectrum above 900 A is analyzed, including several visible and infrared lines which are important in nebular studies. The dependence of the line intensities on the rate of photoexcitation by He Ly-alpha is determined, and the observability of these lines in the solar spectrum is studied. The impact approximation is employed to calculate the expected line widths of the stronger solar O III lines. The photoexciting field at 304 A calculated from the observed intensities of the O III lines below 900 A (Bhatia et al., 1982) is compared with the field predicted by a recent model (Avrett et al., 1976). It is shown that additional radiation trapping must be present beyond that given by this model.

Kastner, S. O.↗
NASA NTRS1986

On the loss of O(+) ions (less than 17 keV/e) in the ring current during the recovery phase of a storm

ISEE-1 observations of magnetospheric H(+) and O(+) ions at 0.01-17.4 keV/e during the recovery phase of the magnetic storm of December 11, 1977 are reported. The data are presented graphically and analyzed in detail. It is found that the phase-space density of H(+) in the magnetotail remained about the same during the recovery, while that of O(+) decreased steadily, and the loss of low-energy O(+) from the outer ring current is attributed to inward convection of the decreasing density in the tail.

Cladis, J. B.↗
NASA NTRS1998

POLAR/TIDE Survey of Thermal O+ Characteristics near 5000km Altitude over the Polar Cap

We analyze measurements of thermal 0+ parameters from the Thermal Ion Dynamics Experiment (TIDE) on POLAR for April - May, 1996 obtained near 5000 km altitude within the polar cap ionosphere - magnetosphere interface region. Certain aspects of O+ parameters in this region were explored by Su et. al. [1998]. In this report, we hope to extend our understanding of the O+ behavior by examining relationships of densities, parallel velocities, and temperatures to the convection velocities, IMF By and Bz components. Preliminary results with the convection velocities are currently being analyzed. In doing so, we are guided in part by the Cleft Ion Fountain paradigm and model developed by Horwitz and Lockwood [1985] which involves downward O+ flows in the polar magnetosphere.

Stevenson, B. A.↗
NASA NTRS1996

Polar Observations of Properties of H+ and O+ Conics in the Cusp Near ~5300 km Altitude

Observations by the thermal ion dynamics experiment (TIDE) on POLAR are used to explore features of low-energy ionospheric ion conical distributions at approximately 5300 km altitude over the southern cusp under different interplanetary magnetic field (IMF) conditions with negative and positive B(sub z) components. The properties are summarized as follows: (1) At the edge upstream of the convection in the cusp, the energy of outflowing ion distributions abruptly increased from a few eV to approximately 100 eV; (2) The angular distributions also abruptly changed from rammed < approximately 5 eV polar wind distributions to approximately 10-100 eV conics; (3) These conic signatures gradually gave way again to polar wind components further downstream of the cusp; (4) The uppermost energy of the detected O+ was larger than that of H+, while the density and flux of O+ were lower than those of H+; (5) The cone angles for both light and heavy ion conics were largest for the upstream region of the convection; (6) Cone angles are wider for O+ than H+; (7) The cone angles as well as the conic energies gradually decreased in the convection direction; (8) The UFI beams and conics were sometimes observed alternately, particularly for H+, and (9) In some cases, the distinct ion conic bursts occurred multiple times during a single cusp crossing.

Hirahara, M.↗
NASA NTRS1972

A discussion of CO and O on Venus and Mars

The absorption of solar ultraviolet radiation in the wavelength range 2000 to 2200 A by CO2 strongly reduces the dissociation rate of HCl on Venus. The Cl catalytic reaction for the rapid recombination of O and CO and the yellow coloration of the Venus haze by OCl(-) and Cl3(-) appears to be unlikely. At the time of the Martian dust storm, the dissociation of H2O in the vicinity of the surface may vanish. The increase of dissociation at high altitudes, however, can be the source of H atoms in the upper atmosphere. The H atoms from the dissociation of hydrides may catalyze the recombination of CO and O in the lower atmospheres of these planets according to the following scheme: H + CO + M yields HCO + M, and HCO + O yields H + CO2. In the case of Venus, there may be other kinds of sinks for the photodissociation products, and its chemical environment might be more complex than that of Mars.

Shimizu, M.↗
NASA NTRS1972

On the production of N2O from the reaction of O(1 D) with N2

Ozone was photolyzed at 2537 A and 25 C in the presence of 42-115 torr of O2 and about 880 torr of N2 to test the relative importance of the two reactions: (1) O(1D) + N2 + M yields N2O + M, and (2) O(1D) + N2 yields O(3P) + N2. N2O was not found as a product. Thus from our detectability limit for N2O (0.3 micron), an upper limit to the efficiency of the first reaction relative to the second of 0.0000025 at 1000 torr total pressure was computed. This corresponds to k1/k2 smaller than 0.8 x 10 to the minus 25 power cu cm/particle.

Simonaitis, R.↗