Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical approximations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A model for the formation of the Local Group

Observational tests of a model for the formation of the Local Group are presented and analyzed in which the mass concentration grows by gravitational accretion of local-pressure matter onto two seed masses in an otherwise homogeneous initial mass distribution. The evolution of the mass distribution is studied in an analytic approximation and a numerical computation. The initial seed mass and separation are adjusted to produce the observed present separation and relative velocity of the Andromeda Nebula and the Galaxy. If H(0) is adjusted to about 80 km/s/Mpc with density parameter Omega = 1, then the model gives a good fit to the motions of the outer members of the Local Group. The same model gives particle orbits at radius of about 100 kpc that reasonably approximate the observed distribution of redshifts of the Galactic satellites.

Peebles, P. J. E.↗

Mixed spectral/finite difference approximations for slightly viscous flows

A numerical scheme is presented, which employs a standard finite difference approximation for the viscous terms in high Reynolds number flows, and resorts to pseudo-spectral methods for the advection terms to greatly reduce the major source of numerical error without dramatically increasing computational cost. The spectral/finite difference (SFD) method evaluates the advection term and second-order differences to evaluate the diffusion term. The fully finite difference (FFD) method with second-order central differences on both terms is also used. The SFD method can handle strong shocks and can outperform the FFD method at moderate viscosity.

Zang, T. A.↗

Theoretical simulation of solar spectra in the middle ultraviolet and visible for atmospheric trace constituent measurements

Two balloon flights reaching float altitudes of approximately 30 and 40 km respectively, were used to obtain scans of the ultraviolet and visible solar spectra. Both flights covered the UV (2800-3500A) at approximately 0.3A resolution and the visible at approximately 0.6A. Numerous scans were obtained during ascent and from float for both flights. All spectral scans obtained at float, from high sun to low sun, were calibrated in wavelength by using several standard solar spectra for line position references. Comparisons of low sun scans and high sun scans show significant atmospheric continuum extinction and have the potential of being used to identify atmospheric lines superimposed on the attenuated solar spectrum. The resolution was mathematically degraded to approximately 5A to better see the broad band atmospheric extinction. This low resolution is also appropriate for the available low resolution absorption coefficients of NO2 and O3, allowing the identification of NO2 and O3 features on the sunset spectra.

Goldman, A.↗

Diffuse energy transport and coda-wave interferometry for resonant transmission between reverberant structures

Approximate analytic and numerical theories are developed with which to model, and compare with laboratory measurements, the diffuse ultrasonic field transmitted from one elastic body to another through a resonant coupling. Particular focus is on the sensitivity of the transmitted field to perturbations in the natural frequency of the coupling, and on the manifestation of such perturbations as time delays in the second body. Immediate application is to measurements of slow dynamic elastic nonlinearity. It is found that the developed approximate theories do a good job of predicting the time dependence of mean square transmitted signal and signal spectra. They also predict the time delays, both their erratic character and their means. Analytic dependence of these time shifts on the fractional frequency perturbation df/f is derived.

42 ENGINEERING↗

Parton Energy Loss in the Generalized High-Twist Approach

In this work, we calculate the radiative parton energy loss in the deeply inelastic scattering (DIS) off a large nucleus within a generalized high-twist approach. The final gluon radiation spectrum is a convolution of the hard partonic part and the transverse momentum dependent (TMD) quark-gluon correlation function, without the twist expansion in the transverse momentum of the initial gluons used in original high twist approach. The TMD quark-gluon correlation function can be factorized approximately as the product of initial quark distribution and TMD gluon distribution which can be used to define the generalized or TMD jet transport coefficient. The radiation spectrum will recover the Gylassy-Levai-Vitev (GLV) result in the first order of the opacity expansion, under the static scattering center and soft gluon radiation approximation. We also investigate numerically the difference as a result of the soft gluon radiation approximation, under the static scattering center approximation.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Data-Centric Approach to Capture Non-Polynomial Nonlinear Dynamics

We propose an analytical construction of observable functions in the extended dynamic mode decomposition (EDMD) algorithm. EDMD is a numerical method for approximating the spectral properties of the Koopman operator. The choice of observable functions is fundamental for applying EDMD to nonlinear problems arising in systems and control. Existing methods either start from a set of dictionary functions and look for the subset that best fits the underlying nonlinear dynamics or rely on machine learning algorithms to “learn” observable functions. Conversely, in this paper, we start from the dynamical system model and lift it through the Lie derivatives, rendering it into a polynomial form. This proposed transformation into a polynomial form is exact and provides an adequate set of observable functions. The strength of the proposed approach is its applicability to a broader class of nonlinear dynamical systems, particularly those with nonpolynomial functions and compositions thereof. Moreover, it retains the physical interpretability of the underlying dynamical system and can be readily integrated into existing numerical libraries. We demonstrate the proposed approach with an application to electric power systems. The modeled system consists of a single generator connected to an infinite bus, where nonlinear terms include sine and cosine functions. The results demonstrate the effectiveness of the proposed procedure in off-attractor nonlinear dynamics for estimation and prediction; the observable functions obtained from the proposed construction outperform methods that use dictionary functions comprising monomials or radial basis functions.

extended dynamic mode decomposition↗

An extension of the Lighthill theory of jet noise to encompass refraction and shielding

A formalism for jet noise prediction is derived that includes the refractive 'cone of silence' and other effects; outside the cone it approximates the simple Lighthill format. A key step is deferral of the simplifying assumption of uniform density in the dominant 'source' term. The result is conversion to a convected wave equation retaining the basic Lighthill source term. The main effect is to amend the Lighthill solution to allow for refraction by mean flow gradients, achieved via a frequency-dependent directional factor. A general formula for power spectral density emitted from unit volume is developed as the Lighthill-based value multiplied by a squared 'normalized' Green's function (the directional factor), referred to a stationary point source. The convective motion of the sources, with its powerful amplifying effect, also directional, is already accounted for in the Lighthill format: wave convection and source convection are decoupled. The normalized Green's function appears to be near unity outside the refraction dominated 'cone of silence', this validates our long term practice of using Lighthill-based approaches outside the cone, with extension inside via the Green's function. The function is obtained either experimentally (injected 'point' source) or numerically (computational aeroacoustics). Approximation by unity seems adequate except near the cone and except when there are shrouding jets: in that case the difference from unity quantifies the shielding effect. Further extension yields dipole and monopole source terms (cf. Morfey, Mani, and others) when the mean flow possesses density gradients (e.g., hot jets).

Ribner, Herbert S.↗

Risk cross sections and their application to risk estimation in the galactic cosmic-ray environment

Radiation risk cross sections (i.e. risks per particle fluence) are discussed in the context of estimating the risk of radiation-induced cancer on long-term space flights from the galactic cosmic radiation outside the confines of the earth's magnetic field. Such quantities are useful for handling effects not seen after low-LET radiation. Since appropriate cross-section functions for cancer induction for each particle species are not yet available, the conventional quality factor is used as an approximation to obtain numerical results for risks of excess cancer mortality. Risks are obtained for seven of the most radiosensitive organs as determined by the ICRP [stomach, colon, lung, bone marrow (BFO), bladder, esophagus and breast], beneath 10 g/cm2 aluminum shielding at solar minimum. Spectra are obtained for excess relative risk for each cancer per LET interval by calculating the average fluence-LET spectrum for the organ and converting to risk by multiplying by a factor proportional to R gamma L Q(L) before integrating over L, the unrestricted LET. Here R gamma is the risk coefficient for low-LET radiation (excess relative mortality per Sv) for the particular organ in question. The total risks of excess cancer mortality obtained are 1.3 and 1.1% to female and male crew, respectively, for a 1-year exposure at solar minimum. Uncertainties in these values are estimated to range between factors of 4 and 15 and are dominated by the biological uncertainties in the risk coefficients for low-LET radiation and in the LET (or energy) dependence of the risk cross sections (as approximated by the quality factor). The direct substitution of appropriate risk cross sections will eventually circumvent entirely the need to calculate, measure or use absorbed dose, equivalent dose and quality factor for such a high-energy charged-particle environment.

NASA Discipline Radiation Health↗

Numerical integration of asymptotic solutions of ordinary differential equations

Classical asymptotic analysis of ordinary differential equations derives approximate solutions that are numerically stable. However, the analysis also leads to tedious expansions in powers of the relevant parameter for a particular problem. The expansions are replaced with integrals that can be evaluated by numerical integration. The resulting numerical solutions retain the linear independence that is the main advantage of asymptotic solutions. Examples, including the Falkner-Skan equation from laminar boundary layer theory, illustrate the method of asymptotic analysis with numerical integration.

Thurston, Gaylen A.↗

Well-Balanced Second-Order Convex Limiting Technique for Solving the Serre–Green–Naghdi Equations

In this article, we introduce a numerical method for approximating the dispersive Serre–Green–Naghdi equations with topography using continuous finite elements. The method is an extension of the hyperbolic relaxation technique introduced in Guermond et al. (J Comput Phys 450:110809, 2022). It is explicit, second-order accurate in space, third-order accurate in time, and is invariant-domain preserving. It is also well balanced and parameter free. Special attention is given to the convex limiting technique when physical source terms are added in the equations. The method is verified with academic benchmarks and validated by comparison with laboratory experimental data.

97 MATHEMATICS AND COMPUTING↗

Exploration of lattice Hamiltonians for functional and structural discovery via Gaussian process-based exploration–exploitation

Statistical physics models ranging from simple lattice to complex quantum Hamiltonians are one of the mainstays of modern physics that have allowed both decades of scientific discovery and provided a universal framework to understand a broad range of phenomena from alloying to frustrated and phase separated materials to quantum systems. Traditionally, exploration of the phase diagrams corresponding to multidimensional parameter spaces of Hamiltonians was performed using a combination of basic physical principles, analytical approximations, and extensive numerical modeling. However, exploration of complex multidimensional parameter spaces is subject to the classic dimensionality problem, and the behaviors of interest concentrated on low dimensional manifolds remain undiscovered. Here, we demonstrate that a combination of exploration and exploration–exploitation with Gaussian process modeling and Bayesian optimization allows effective exploration of the parameter space for lattice Hamiltonians and effectively maps the regions at which specific macroscopic functionalities or local structures are maximized. We argue that this approach is general and can be further extended well beyond the lattice Hamiltonians to effectively explore the parameter space of more complex off-lattice and dynamic models.

42 ENGINEERING↗

Behavior of solitary waves of coupled nonlinear Schrödinger equations subjected to complex external periodic potentials with odd-$\mathcal{PT}$ symmetry

In this work, we discuss the response of both moving and trapped solitary wave solutions of a two-component nonlinear Schrödinger system in 1 + 1 dimensions to an odd-$\mathcal{PT}$ external periodic complex potential. The dynamical behavior of perturbed solitary waves is explored by conducting numerical simulations of the nonlinear system and using a collective coordinate variational approximation. We present case examples corresponding to choices of parameter values and initial conditions involved therein. The results of the collective coordinate approximation are compared against numerical simulations where we observe qualitatively good agreement between the two. Unlike the case for a single-component solitary wave in a complex periodic $\mathcal{PT}$-symmetric potential, the collective coordinate equations do not have a small oscillation regime, and initially the height of the two components changes in opposite directions often causing instability. We find that the dynamic stability criteria we have used in the one-component case are a good indicator for the onset of dynamic instabilities in the present setup.

97 MATHEMATICS AND COMPUTING↗

Accurate localization of Kosterlitz-Thouless-type quantum phase transitions for one-dimensional spinless fermions

We investigate the charge-density wave (CDW) transition for one-dimensional spinless fermions at half band filling with nearest-neighbor electron transfer amplitude t and interaction V. The model is equivalent to the anisotropic XXZ Heisenberg model for which the Bethe Ansatz provides an exact solution. For V>V c =2t, the CDW order parameter and the single-particle gap are finite but exponentially small, as is characteristic for a Kosterlitz-Thouless transition. It is notoriously difficult to locate such infinite-order phase transitions in the phase diagram using approximate analytical and numerical approaches. Second-order Hartree-Fock theory is qualitatively applicable for all interaction strengths, and predicts the CDW transition to occur at V$^{(2)}_{c,2}$≈1.5t. Second-order Hartree Fock theory is almost variational because the density of quasiparticle excitations is small. We apply the density-matrix renormalization group (DMRG) for periodic boundary conditions for system sizes up to 514 sites, which permits a reliable extrapolation of all physical quantities to the thermodynamic limit, apart from the critical region. We investigate the ground-state energy, the gap, the order parameter, the momentum distribution, the quasiparticle density, and the density-density correlation function to locate V c from the DMRG data. In conclusion, tracing the breakdown of the Luttinger liquid and the peak in the quasiparticle density at the band edge permits us to reproduce V c with an accuracy of one percent.

1-dimensional spin chains↗

Primordial nucleosynthesis with non-extensive statistics

The conventional Big Bang model successfully anticipates the initial abundances of 2 H(D), 3 He, and 4 He, aligning remarkably well with observational data. However, a persistent challenge arises in the case of 7 Li, where the predicted abundance exceeds observations by a factor of approximately three. Despite numerous efforts employing traditional nuclear physics to address this incongruity over the years, the enigma surrounding the lithium anomaly endures. In this context, we embark on an exploration of Big Bang nucleosynthesis (BBN) of light element abundances with the application of Tsallis non-extensive statistics. A comparison is made between the outcomes obtained by varying the non-extensive parameter q away from its unity value and both observational data and abundance predictions derived from the conventional big bang model. Here, a good agreement is found for the abundances of 4 He, 3 He and 7 Li, implying that the lithium abundance puzzle might be due to a subtle fine-tuning of the physics ingredients used to determine the BBN. However, the deuterium abundance deviates from observations.

Bertulani, Carlos A.↗

Development of the uncertainty quantification toolkit's python interface and surrogate construction tutorial

The uncertainty quantification toolkit (UQTk) is a collection of c++ libraries that assess the confidence of numerical models. Surrogate approximations, often polynomial chaos expansions (PCEs), lessen the computational cost of these assessments. I developed a Python interface in UQTk for regression and Bayesian compressive sensing to add to the existing Galerkin projection method. These methods receive an object containing the polynomial basis information and NumPy arrays of sample points, call c++ methods, and return the PCE coefficients in a NumPy array. To demonstrate these methods, I wrote a tutorial in which I use them to construct surrogates for Genz functions and calculate the resulting error.

97 MATHEMATICS AND COMPUTING↗

Vertical-Axis Wind Turbine Steady and Unsteady Aerodynamics for Curved Deforming Blades

Vertical-axis wind turbines’ simpler design and low center of gravity make them ideal for floating wind applications. However, efficient design optimization of floating systems requires fast and accurate models. Low-fidelity vertical-axis turbine aerodynamic models, including double multiple streamtube and actuator cylinder theory, were created during the 1980s. Commercial development of vertical-axis turbines all but ceased in the 1990s until around 2010 when interest resurged for floating applications. Despite the age of these models, the original assumptions (2-D, rigid, steady, straight bladed) have not been revisited in full. When the current low-fidelity formulations are applied to modern turbines in the unsteady domain, aerodynamic load errors nearing 50% are found, consistent with prior literature. However, a set of steady and unsteady modifications that remove the majority of error is identified, limiting it near 5%. This paper shows how to reformulate the steady models to allow for unsteady inputs including turbulence, deforming blades, and variable rotational speed. A new unsteady approximation that increases numerical speed by 5–10× is also presented. Combined, these modifications enable full-turbine unsteady simulations with accuracy comparable to higher-fidelity vortex methods, but over 5000× faster.

17 WIND ENERGY↗

On propagation of long waves in curved ducts.

A two-dimensional detailed study of the behavior of long waves in curved ducts and in junctions between straight and curved ducts will be given. The mathematical treatment of the problem utilizes the method of separation variables. Solutions and expressions for principal mode of the wave are obtained by using the linearized equation of motion solved for its characteristic values. The unavoidable approximations in the numerical solutions of the cylindrical functions are due to use of series expansion of Bessel functions and from restrictions necessary to solve infinite matrices.

Rostafinski, W.↗

The transmission of sonic boom signals into rooms through open windows.

This paper is the second of two companion papers. In the first paper, expressions for the acoustic field generated inside a room with an open window due to incoming transient or periodic signals have been presented. In this paper, the technique has been applied to the specific example of an N-wave type signal. Detailed mathematical analysis is followed by its approximate version and numerical computation. Results of controlled experiments, using simulated sonic booms, have been compared with theoretical predictions.

Vaidya, P. G.↗