Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nuclear matrix elements”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Nanostructured Alumina Forming Austenitic Alloy (NAFA) Production using Advanced Manufacturing

Alumina-forming austenitic (AFA) alloys are well known for their exceptional corrosion-resistant properties due to the formation of a dense oxide scale beneficial in their application as a nuclear material. However, use of the alloys in core material applications is limited due to the high nickel-transmutation and helium generation rate in service, leading to swelling and reduced lifetimes. Enhancing the sink strength to pin gas bubbles and increasing gas management of the material may mitigate many of the degradation phenomena expected during alloy deployment (such as high-temperature helium embrittlement and cavity swelling for lead-cooled fast-reactor applications). Nanostructured materials are usually produced using a time-consuming and expensive batch process like mechanical alloying to achieve the fine homogenous distribution of nanoprecipitates throughout the matrix material. Integrating the nanoprecipitates in modern additive manufacturing processes has proven difficult, as the required nano-sizes or number densities cannot be achieved simultaneously. Efforts to increase the number density of precipitates by adding more precipitate-forming rare-earth elements led to agglomeration of such elements, while the nano-sized precipitates did not form in sufficient quantity when not enough rare-earth element was use. In this work a novel approach to advanced manufacturing and the fabrication of Nanostructured AFA (NAFA) materials was chosen. A dual precipitate-forming NAFA steel with a chemistry more suitable for advanced reactor applications was produced to create an environmentally resistant, high-sink-strength austenitic alloy for advanced reactor cladding applications.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Nanostructured Alumina-Forming Austenitic Alloy (NAFA) Production Using Advanced Manufacturing

Alumina-forming austenitic (AFA) alloys are well known for their exceptional corrosion-resistant properties due to the formation of a dense oxide scale beneficial in their application as a nuclear material. However, use of the alloys in core material applications is limited due to the high nickel-transmutation and helium generation rate in service, leading to swelling and reduced lifetimes. Enhancing the sink strength to pin gas bubbles and increasing gas management of the material may mitigate many of the degradation phenomena expected during alloy deployment (such as high-temperature helium embrittlement and cavity swelling for lead-cooled fast-reactor applications). Nanostructured materials are usually produced using a time-consuming and expensive batch process like mechanical alloying to achieve the fine homogenous distribution of nanoprecipitates throughout the matrix material. Integrating the nanoprecipitates in modern additive manufacturing processes has proven difficult, as the required nano-sizes or number densities cannot be achieved simultaneously. Efforts to increase the number density of precipitates by adding more precipitate-forming rare-earth elements led to agglomeration of such elements, while the nano-sized precipitates did not form in sufficient quantity when not enough rare-earth element was use. In this work a novel approach to advanced manufacturing and the fabrication of Nanostructured AFA (NAFA) materials was chosen. A dual precipitate-forming NAFA steel with a chemistry more suitable for advanced reactor applications was produced to create an environmentally resistant, high-sink-strength austenitic alloy for advanced reactor cladding applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effect of vector meson spin coherence on the observables for the chiral magnetic effect in heavy-ion collisions

The chiral magnetic effect (CME) in heavy-ion collisions reflects the local violation of P and CP symmetries in strong interactions and manifests as electric charge separation along the direction of the magnetic field created by the wounded nuclei. The experimental observables for the CME, such as the γ 112 correlator, the R Ψ$_2$ ⁡ (Δ⁢S) correlator, and the signed balance functions, however, are also subject to non-CME backgrounds, including those from resonance decays. A previous study showed that the CME observables are affected by the diagonal component of the spin density matrix, the ρ 00 for vector mesons. Here, in this work, we study the contributions from the other elements of the spin density matrix using a toy model and a multiphase transport model. We find that the real part of the ρ 1-1 component, Re ⁡ρ 1-1 , affects the CME observables in a manner opposite to that of the ρ 00 . All three aforementioned CME observables show a linear dependence on Re ⁡ρ 1-1 in the model calculations, supporting our analytical derivations. The rest elements of the spin density matrix do not contribute to the CME observables. The off-diagonal terms in the spin density matrix indicate spin coherence and may be nonzero in heavy-ion collisions due to local spin polarization or spin-spin correlations. Thus, Re ⁡ρ 1-1 , along with ρ 00 , could play a significant role in interpreting measurements in search of the CME.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Moments of nucleon unpolarized, polarized, and transversity parton distribution functions from lattice QCD at the physical point

The second Mellin moments ⟨ x ⟩ of the nucleon’s unpolarized, polarized, and transversity parton distribution functions are computed. Two lattice QCD ensembles at the physical pion mass are used: these were generated using a tree-level Symanzik-improved gauge action and 2 + 1 flavor tree-level improved Wilson Clover fermions coupling via 2-level HEX-smearing. The moments are extracted from forward matrix elements of local leading twist operators. We determine renomalization factors in RI-(S)MOM and match to MS ¯ at scale 2 GeV. Our findings show that operators that exhibit vanishing kinematics at zero momentum can have significantly reduced excited-state contamination. The resulting polarized moment is used to quantify the longitudinal contribution to the quark spin-orbit correlation. All our results agree within two sigma with previous lattice results. Published by the American Physical Society 2024

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Spin Alignment of Vector Mesons in Heavy-Ion Collisions

Polarized quarks and antiquarks in high-energy heavy-ion collisions can lead to the spin alignment of vector mesons formed by quark coalescence. Here, using the relativistic spin Boltzmann equation for vector mesons derived from Kadanoff-Baym equations with an effective quark-meson model for strong interaction and quark coalescence model for hadronizaton, we calculate the spin density matrix element $ρ_{00}$ for Φ mesons and show that anisotropies of local field correlations with respect to the spin quantization direction lead to Φ meson's spin alignment. We propose that the local correlation or fluctuation of Φ fields is the dominant mechanism for the observed Φ meson's spin alignment and its strength can be extracted from experimental data as functions of collision energies. The calculated transverse momentum dependence of $ρ_{00}$ agrees with STAR's data. We further predict the azimuthal angle dependence of $ρ_{00}$ which can be tested in future experiments.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Systematic Uncertainties from Gribov Copies in Lattice Calculation of Parton Distributions in the Coulomb Gauge

Recently, a new method has been proposed to compute parton distributions using boosted correlators fixed in the Coulomb gauge (CG) within the framework of large-momentum effective theory. This approach, which does not involve Wilson lines, could greatly improve the efficiency and precision of lattice quantum chromodynamics calculations. However, concerns remain regarding whether systematic uncertainties from Gribov copies, which correspond to ambiguities in lattice gauge-fixing, are adequately controlled. This work assesses the effects of Gribov copies on Coulomb-gauge-fixed quark correlators. We utilize different strategies for Coulomb-gauge fixing, selecting two different groups of Gribov copies based on lattice gauge configurations. We examine the differences in the resulting spatial quark correlators in both vacuum and pion states. Our findings indicate that the statistical errors of the matrix elements from both Gribov copies, regardless of the correlation range, decrease proportionally to the square root of the number of gauge configurations. The difference between the strategies does not show statistical significance compared to the gauge noise, demonstrating that the effect of the Gribov copies can be neglected in practical lattice calculations of quark parton distributions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2026

A limit on the total lepton number in the Universe from BBN and the CMB

At temperatures below the QCD phase transition, any substantial lepton number in the Universe can only be present within the neutrino sector. In this work, we systematically explore the impact of a non-vanishing lepton number on Big Bang Nucleosynthesis (BBN) and the Cosmic Microwave Background (CMB). Relying on our recently developed framework based on momentum averaged quantum kinetic equations for the neutrino density matrix, we solve the full BBN reaction network to obtain the abundances of primordial elements. We find that the maximal primordial total lepton number L allowed by BBN and the CMB is -0.12 (-0.10) ≤ L ≤ 0.13 (0.12) for NH (IH), while specific flavor directions can be even more constrained. This bound is complementary to the limits obtained from avoiding baryon overproduction through sphaleron processes at the electroweak phase transition since, although numerically weaker, it applies at lower temperatures and is obtained completely independently. We publicly release the C++ code COFLASY-C on GitHub (https://github.com/mariofnavarro/COFLASY/tree/COFLASY-C) which solves for the evolution of the neutrino quantum kinetic equations numerically.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

From phase decomposition to evaporation: A multi-modal evaluation of thermally degraded model lightweight high-entropy alloy

Lightweight high-entropy alloys (LHEAs) have the potential to replace conventional lightweight materials due to their superior mechanical properties and thermal stability. However, the thermal degradation pattern of LHEAs from phase decomposition to evaporation is not clear. We develop a new Al-based dual phase (FCC + HCP) LHEA—AlTi 0.45 CuZn, and further investigate its thermal degradation behavior for potential high-temperature structural applications. Using multimodal advanced characterization techniques such as differential scanning calorimetry/thermogravimetric analysis, scanning/transmission electron microscopy, and synchrotron X-ray diffraction/pair distribution function (XRD/PDF), a sequence of thermal degradation events beyond the thermal phase stability limit—between 250 and 360 °C—is observed. These include phase decomposition at ~360 °C, Zn evaporation at ~750 °C, and LHEA melting at 880 °C which results in ~25% cumulative weight loss. The formation of Al-Ti phase off the AlTi 0.45 CuZn matrix is due to the largest negative mixing enthalpy for Al-Ti than other binary pairs. Similarly, Zn evaporation from AlTi 0.45 CuZn LHEA is due to its faster evaporation rate than other constituent elements. The high-resolution synchrotron XRD and PDF results support the aforementioned observations; in addition, they reveal local atomic arrangements, local strain, and sluggish grain growth in the LHEA. Among other LHEAs of close density range (5.55 ≤ ρ ≤ 5.85 g/cc), the investigated LHEA exhibits outstanding nano-indentation hardness values due to the coupled grain size effect and HCP phase strengthening of the FCC matrix. As the search for LHEAs for lightweight applications grows, this study shows the potential use of AlTi 0.45 CuZn LHEA for structural applications even at elevated temperatures.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Nuclear Fuel and Pu Redox Studies from The Glenn T. Seaborg Institute at Idaho National Laboratory

The Glenn T. Seaborg Institute at Idaho National Laboratory (INL-GTSI) focuses on advancing fundamental research in the actinide sciences by providing unique opportunities to early career scientists and engineers to gain experience studying the actinide elements and their associated systems. The INL-GTSI is built from three focus areas that are based on the expertise and supporting infrastructure at INL and include solid state chemistry and physics, solution phase chemistry and physics, and forensic and isotope science. INL is the lead Laboratory for nuclear energy research and development in the U. S. and the research on nuclear fuels performed under the INL-GTSI gives good examples of solid state studies. Uranium-Molybdenum (U-Mo) alloys are leading fuel candidates for conversion of high performance research and test reactors to low-enriched fuels. During irradiation, generated fission gas accumulates into bubbles and self-organizes into a gas bubble superlattice (GBS) that effectively stores fission gases and inhibits fuel swelling. A study on the early self- organizing behavior of the GBS shows that not only grain boundaries but the interfaces between the U-Mo matrix and uranium carbide (UC) impurities are important to GBS formation.[1] In solution, understanding the complex redox behavior of plutonium in aqueous environments is critical for establishing optimized nuclear waste reprocessing solvent systems and storage tank environments. INL-GTSI researchers have produced an experimentally validated multi-scale model of the gamma radiation induced behavior of plutonium ions in concentrated aqueous HNO3 solutions.[2] Here, gamma radiation effected only minimal steady state changes in the redox distribution of the plutonium oxidation states. The redox cycling between Pu(IV) and Pu(III) is demonstrated to be mediated by the •OH/NO3• radical oxidation of Pu(III) and the H2O2/HNO3 driven reduction of Pu(IV). The INL-GTSI offers young researchers the unique chance to work directly with actinide bearing materials in a U. S. National Laboratory environment. Further topical areas of interest to the INL-GTSI include, but are not limited to, fundamental actinide properties, structure/property (electronic, magnetic, thermal) relations, actinide quantum criticality, f- electron interactions, electron correlations, computational studies, new phases, defect effects, interface interactions, isotope production and separation, forensic analytical chemistry, structure and dynamic properties of actinides in non-aqueous media, separations chemistry and kinetics for advanced nuclear fuel cycles, radiation effects, and innovative and advanced ligand design for complexation of the actinides.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Measurement of the parity-violating asymmetry in the 𝑁 → Δ transition at low 𝑄 2

Here, we report the measurement of the parity-violating asymmetry in the 𝑁 → Δ transition via the 𝑒 − + 𝑝 → 𝑒 − + Δ + reaction at two different kinematic points with low four-momentum transfer 𝑄 2 . Measurements were made with incident electron beam energies of 0.877 and 1.16 GeV, corresponding to 𝑄 2 values of 0.0111 and 0.0208 (GeV/c) 2 , respectively. These measurements put constraints on a low-energy constant in the weak Lagrangian, 𝑑 Δ , corresponding to a parity-violating electric-dipole transition matrix element. This matrix element has been shown to be large in the strangeness-changing channel, via weak hyperon decays such as Σ + → 𝑝⁢𝛾. The measurements reported here constrain 𝑑 Δ in the strangeness-conserving channel. The final asymmetries were −0.65±1.00⁢(stat.)±1.02⁢(syst.) ppm (parts per million) for 0.877 GeV and −3.59±0.82⁢(stat.)±1.33⁢(syst.) ppm for 1.16 GeV. With these results we deduce a small value for 𝑑 Δ , consistent with zero, in the strangeness-conserving channel, in contrast to the large value for 𝑑 Δ previously reported in the strangeness-changing channel.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

Wireless Instrumented RB Experiment Preliminary Design and Analysis

The ability to deploy new nuclear fuels for current or future reactor concepts requires carefully designed experiments to generate data to support fuel qualification. Ideally these experiments would include state of-the-art sensing to maximize the amount of in situ data that can be collected during operation. Furthermore, advanced reactor systems can take advantage of integrated in-core sensing technologies to maximize fuel utilization, reduce unnecessary conservativism in design margins, and improve operator’s understanding of limiting peaking factors. Before any novel sensing technologies can be readily adopted for nuclear applications, they must first demonstrate acceptable performance in test reactors. This report summarizes the preliminary design and analysis of the most highly instrumented irradiation experiment ever performed in the removable beryllium (RB) positions of the High Flux Isotope Reactor (HFIR) at Oak Ridge National Laboratory (ORNL). The Wireless Instrumented RB Experiment 2021 (WIRE-21) will test a wide range of sensors including wireless sensors being developed by Westinghouse Electric Company (WEC) that could provide in situ measurements of peak fuel temperatures and fuel rod pressurization due to fission gas release. The ability to wirelessly transmit a signal through the fuel rod’s cladding is critical to improving fuel monitoring capabilities without requiring signal penetrations through the cladding pressure boundary, which would significantly impact fuel fabrication, handling, and operation. Other sensors that will be tested in WIRE-21 include an array of thermocouples, self-powered neutron detectors (SPNDs), and spatially distributed fiber-optic temperature sensors. More generally, WIRE-21 will establish a flexible irradiation vehicle design to allow accelerated, economical testing of advanced sensor technologies while leveraging the extremely high neutron flux that is available in HFIR. This report summarizes the mechanical design for WIRE-21, the experimental test matrix, initial neutronic and thermal design analyses, and the active monitoring and control system enhancements necessary to support testing of advanced sensor technologies. The containment for WIRE-21 is similar to previous RB irradiation vehicles but includes a few modifications, most notably the use of integrated compression seals to pass a larger number of sensor leads through the experiment’s pressure boundary. In addition to the sensor leads, inert gas lines are passed into the experiment to enable active temperature control and the ability to pneumatically actuate a bellows-driven pressure sensor. WIRE-21 is targeting temperatures (300–350°C) and neutron fluence levels (~10 22 n/cm 2 ) relevant to light water reactors (LWRs), but the flexible design of the experiment vehicle allows much higher operating temperatures (>1,100°C). Neutronic calculations determine the neutron flux conditions as well as the nuclear heating within the experiments. These results are used as inputs to detailed thermal finite element calculations, which are required to evaluate the complex, three-dimensional heat transfer that occurs within WEC’s wireless sensor enclosures. Initial results show that the temperatures of the sensors’ enclosures and the metal bellows can be operated near the temperature range of LWR coolants and cladding while simultaneously increasing the temperature of a surrogate fuel material to values in the range of 800–1200°C to simulate centerline fuel temperatures during LWR operation.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2024

Assessing Composite Structure in Metal–Organic Framework-Polymer Mixed-Matrix Membranes

Metal-organic frameworks (MOFs) are renowned for their tunable structure, porosity, and internal chemistry, with demonstrated applications in molecular separations, storage, and conversion. While they are widely usable, the powdery characteristics of MOF materials can be limiting for large-scale processing and implementation in devices. Incorporating MOF particles into polymer supports affords engineering solutions to overcome these issues, yet the nature of the resulting composites is difficult to assess. Here, in this work, we present spectroscopic and calorimetric methods that we believe help establish a holistic physicochemical picture of the composite structure using a series of Zr MOFs with different pore sizes as a testbed. Power law decays are observed in X-ray scattering profiles in low q-space ranging between 2.4 and 3.3, which we interpret as changes in scattering due to polymer infiltrating MOF particles. This interpretation is supported by solid-state nuclear magnetic resonance spectroscopy and differential scanning calorimetry measurements that identify populations of the MOF-associated polymer. Additionally, positron annihilation lifetime spectroscopy measurements collected on a series of composites with different MOF-polymer ratios show multiple decay constants, each correlated to a different free volume elements. In combination with the spectroscopic, calorimetric, and scattering results, we utilize the trends in decay constants as a function of polymer mass fraction to hypothesize a polymer infiltration mechanism whereby large pores are preferentially filled, followed by small pores and, later still, interstitial spaces between particles. Even with vigorous investigation of polymer, MOF, and interface characteristics, the complex and heterogeneous nature of the composites makes absolute structural assertions difficult. We envision that the approaches demonstrated here will be a useful foundation to assess and ultimately guide the design of future MOF-polymer composites.

36 MATERIALS SCIENCE↗
DOE OSTI2025

First measurement of D* + vector meson spin alignment in Pb–Pb collisions at $\sqrt{{s}_{\text{NN}}}={5}.0{2}$ TeV

The first measurement of prompt D *+ -meson spin alignment in ultrarelativistic heavy-ion collisions with respect to the direction orthogonal to the reaction plane is presented. The spin alignment is quantified by measuring the element ρ 00 of the diagonal spin-density matrix for prompt D *+ mesons with 4 < p T < 30 GeV/c in two rapidity intervals, |y| < 0.3 and 0.3 < |y| < 0.8, in central (0–10%) and midcentral (30–50%) Pb–Pb collisions at $\sqrt{{s}_{\text{NN}}}={5}.0{2}$ TeV. Evidence of spin alignment ρ 00 > 1/3 has been found for p T > 15 GeV/c and 0.3 < |y| < 0.8 with a significance of 3.1σ. The measured spin alignment of prompt D *+ mesons is compared with the one of inclusive J/ψ mesons measured at forward rapidity (2.5 < y < 4).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

The 1 → 3 massive splitting functions from QCD factorization and SCET

Splitting functions are universal functions describing the collinear dynamics of gauge theories, and as such are crucial ingredients for a wide variety of calculations in perturbative QCD. We present analytic results for the triple collinear splitting functions in QCD with a single massive parton. We derive the splitting functions using two distinct methods; first by expanding the squared matrix elements in the collinear limit, and secondly by using soft-collinear effective theory with massive quarks. We find agreement between these two approaches, providing a strong check of our results. Additionally, we also check all iterated and soft limits of our results, finding agreement with predictions from factorization. Our results provide an important ingredient for higher order perturbative calculations involving massive partons, and for the description of the collinear dynamics of heavy flavor jets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Exploring the role of high- j configurations in collective observables through the Coulomb excitation of 106 Cd

In this work, the shape and collectivity of 106 Cd was investigated via a sub-barrier-energy Coulomb excitation experiment performed at the NSCL ReA3 facility using the JANUS setup. Transition matrix elements between low-lying states were found to agree with adopted values, and information on the shape and collectivity of higher-lying states was extracted for the first time. Locally-optimized large-scale shell-model calculations were found to describe well the B(E2) transition strengths but failed to reproduce the spectroscopic quadrupole moments Q s . An analysis of the E2 rotational invariants and the normalized quadrupole moment q s indicates that this may be due to a significant degree of triaxiality in 106 Cd which is not captured by the present shell-model calculations. Analogous calculations for the Fe isotopes (two protons below the Z = 28 magic number) reveal the critical role of high-j neutron configurations for the description of quadrupole moments in the heavy Fe and Cd isotopes (two protons below magic Z = 50), but this effect is insufficient to explain the shape of 106 Cd, posing a puzzle for the understanding of nuclear structure towards N = 50.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Status on lattice calculations of the proton spin decomposition

Abstract Lattice calculations of the proton spin components is reviewed. The lattice results of the quark spin from the axial-vector current matrix element at ∼ 0.3−0.4 is smaller than those from the constituent quark models. This is largely due to the fact that the vacuum polarization contribution from the disconnected insertion is negative. Its connection with the anomalous Ward identity is clarified and verified numerically. This resolves the contentious issue in the “proton spin crisis.” The glue spin and angular momentum are found to be large and there is notable contribution from the quark orbital angular momentum. Renormalization, mixing, and normalization of the quark and glue angular momenta are discussed. With sufficient precision, they can be compared with more precise experimental measurements when the electron-ion collider facility is available.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

High plasticity in refractory composite fabrication by ultrasonic additive manufacturing

Refractory metal composites are desirable for use in extreme environments that require materials with high specific strengths and resilience to external environments such as that found in nuclear and aerospace. However, due to the high melting temperature of refractories, liquid state joining processes such as welding remains difficult. Ultrasonic additive manufacturing (UAM) provides a potential route for processing refractory composites because it is a solid-state (i.e., no-melting) process and allows for intermittent machining operations to be performed between welds. Further, to demonstrate refractory composite fabrication, this study utilized UAM to machine a cavity to locate and sequester a Mo foil in a Zircaloy-4 (Zry-4) baseplate and additively build over the top with Zry-4 foils, thereby embedding the Mo in Zry-4 matrix. Significant deformation of the Zry-4 microstructure was observed: this deformation caused adiabatic heating and subsequent dynamic recrystallization through the transformation from α→β and then back to α as the material cooled. Flexural testing of the Zr–Mo composite revealed no delamination or failure, but the strength was not as expected, falling lower than a cold-worked Zry-4 sample. Finite element analysis supported that some bonding must have existed between the Zry-4 and Mo. There was indeed an interdiffusion zone at the Zry-4 foil–Mo foil interface, observing a metastable body-centered cubic β-Zr lathe. It was determined that sufficient strain energy was present to encourage the nucleation of the β-Zr grain along α-Zr grains. Future work is warranted to investigate UAM for refractory composite fabrication.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evaluation of Gamma Ray Production - Quarterly Report FY22Q2

The LLNL team has performed the first systematic study of the effect of two-body weak currents in β decay rates across the entire mass table. In light and medium-mass nuclei, two-body weak currents from chiral effective field theory account for a significant portion of the phenomenological quenching of Gamow-Teller transition matrix elements. We examined the systematic effects of two-body axial currents on Gamow-Teller strength and β-decay rates in heavy nuclei within energy-density functional theory. We extended the charge-changing finiteamplitude pnFAM code to incorporate the contributions of two-body currents to the usual onebody linear response in the Gamow-Teller channel. We found that the two-body currents, as expected, usually quench both summed Gamow-Teller strength and decay rates, but by an amount that decreases as the neutron excess grows; see Fig. 1. In addition, they can enhance individual low-lying transitions, leading to decay rates that are quite different from those that an energy-independent quenching would produce, particularly in neutron-rich nuclei. This new physics capability is unique and provides the highest-fidelity description of β decay on the market. The underlying computational implementation can be reused to calculate γ-strength functions for finite-range nuclear potentials such as the Gogny force, which will allow us to benchmark some of our future developments against published results. The paper is in print in Phys. Rev. C.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗