Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Neutron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Energy-resolved neutron imaging and diffraction including grain orientation mapping using event camera technology

Time-of-flight neutron diffraction and energy-resolved imaging each provide unique perspectives into material properties. Neutron diffraction is useful for assessing microstructural parameters such as phase composition, texture, and dislocation densities, though it typically provides averaged data over the sampled volume. Energy-resolved imaging, on the other hand, offers both spatial and spectral information by detecting Bragg edges and neutron absorption resonances, which enables detailed mapping of microstructure and isotopic composition. When combined, these techniques have the potential to enrich our understanding of material behavior across different scales, enhancing our understanding of complex materials. Traditionally, these modalities are conducted on separate instruments, which is time-consuming and poses challenges for data integration. Here, we report the integration of the LumaCam, an event-mode energy-resolved neutron imaging camera with the HIPPO time-of-flight diffractometer at LANSCE. This integration enables simultaneous diffraction and imaging across the full spectrum, with analysis optimized for diffraction and Bragg-edge imaging in the thermal range (0.45–10 Å) and resonance imaging in the epithermal range (0.5–3000 eV), facilitating comprehensive multi-modal analysis. We demonstrate its capabilities through case studies, including spatial mapping of grain orientations in a steel sample and accurate thickness estimations for irregular samples including a depleted uranium cylinder and a natural silver-containing mineral specimen. The combined setup enhances real-time sample alignment and provides comprehensive data for crystal structure, texture, and isotopic composition analysis. This approach opens new possibilities for advanced applications in nuclear engineering, archaeology, and materials science.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Neutron sub-micrometre tomography from scattering data

Neutrons are valuable probes for various material samples across many areas of research. Neutron imaging typically has a spatial resolution of larger than 20 µm, whereas neutron scattering is sensitive to smaller features but does not provide a real-space image of the sample. A computed-tomography technique is demonstrated that uses neutron-scattering data to generate an image of a periodic sample with a spatial resolution of ∼300 nm. The achieved resolution is over an order of magnitude smaller than the resolution of other forms of neutron tomography. This method consists of measuring neutron diffraction using a double-crystal diffractometer as a function of sample rotation and then using a phase-retrieval algorithm followed by tomographic reconstruction to generate a map of the sample's scattering-length density. Topological features found in the reconstructions are confirmed with scanning electron micrographs. This technique should be applicable to any sample that generates clear neutron-diffraction patterns, including nanofabricated samples, biological membranes and magnetic materials, such as skyrmion lattices.

nanoscience↗
DOE OSTI2019

Spatially limited antiferromagnetic order in a cluster glass compound Tb2Ni0.90Si2.94

In the present study, the synthesis of a new ternary intermetallic compound Tb2Ni0:90Si2:94 has been reported. The detailed studies on structure, static and dynamical magnetic properties of the compound have been investigated by means of powder x-ray diffraction, compositional analysis, dc & ac magnetization, non-equilibrium dynamics, heat capacity and neutron diffraction measurements. The dc & ac magnetic susceptibility reveal that the compound undergoes spin cluster-glass behaviour below 9.9 K. The frequency dependence of the freezing temperature have been analyzed on the basis of dynamic scaling laws such as power-law divergence and Vogel-Fulcher law, which further con rm the cluster-glass state formation for the compound. A detailed study on non-equilibrium dynamical behaviour associated with cluster-glass state has been carried out through magnetic relaxation behaviour along with magnetic memory effect in zero-field-cooled (ZFC) as well as field-cooled (FC) conditions and associated aging effect. The zero-field neutron diffraction study reveals the presence of a spatially limited antiferromagnetic phase in addition to the magnetically frustrated cluster-glass state. This result has also been supported through zero-field heat capacity studies. The variation in local electronic environment among the magnetic rare- earth ions caused by the structural disorder associated with Ni/Si ions have been argued to be responsible for the coexistence of different magnetic phases.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Magnetic structure and properties of the compositionally complex perovskite (Y 0.2 La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 )MnO 3

Large configurational disorder in compositionally complex ceramics can lead to unique functional properties that deviate from traditional rules of alloy mixing. In recent years, compositionally complex oxides (CCOs) have shown intriguing magnetic behavior including long-range order, enhanced magnetic exchange couplings, and mixed phase magnetic structures. This work focuses on how large local spin disorder affects magnetic ordering in a CCO. Specifically, we investigated the A-site alloyed perovskite, (Y 0.2 La 0.2 Pr 0.2 Nd 0.2 Tb 0.2 )MnO 3 , or (5A)MnO 3 , using a combination of bulk magnetometry, synchrotron X-ray diffraction, and temperature-dependent neutron diffraction. The five A-site ions have an average spin and ionic radius nearly equal to that of Nd 3+ ions, which minimizes structural distortions and allows for an understanding of the local spin disorder effects through a direct comparison with NdMnO 3 . Our magnetometry data show that (5A)MnO 3 exhibits two distinct phase transitions associated with the A-site and B-site sublattices, as seen in NdMnO 3 , as well as the presence of domain pinning and exchange bias at low temperature, suggesting a mixed phase magnetic ground state, as seen in other magnetic CCOs. Neutron powder diffraction shows clear long-range antiferromagnetic ordering below 67 K and refines to a Pn'ma' magnetic structure at low temperature, in excellent agreement with the well-studied behavior of NdMnO 3 . The two most notable differences in (5A)MnO 3 magnetism apparent from our data are a slight suppression of the B-site ordering temperature, which is explained by a smaller Mn–O–Mn bond angle in (5A)MnO 3 than NdMnO 3 , and the presence of a magnetic susceptibility transition above the B-site ordering, which could indicate the formation of a cluster glass but requires further study. Finally, this work demonstrates a general method of isolated investigation of size and spin disorder in CCOs and motivates future work using local structure probes to better understand the effects of nanoscale clustering and local spin disorder in magnetic CCOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Spatially anisotropic 𝑆=1 square-lattice antiferromagnet with single-ion anisotropy realized in a Ni(II) pyrazine-𝑛,𝑛′-dioxide coordination polymer

The Ni(NCS) 2 (pyzdo) 2 coordination polymer is found to be an S = 1 spatially anisotropic square lattice with easy-axis single-ion anisotropy. This conclusion is based upon considering in concert the experimental probes x-ray diffraction, magnetic susceptibility, magnetic-field-dependent heat capacity, muon-spin relaxation, neutron diffraction, neutron spectroscopy, and pulsed-field magnetization. Long-range antiferromagnetic (AFM) order develops at T N = 18.5 K. Although the samples are polycrystalline, there is an observable spin-flop transition and saturation of the magnetization at ≈80 T. Linear spin-wave theory yields spatially anisotropic exchanges within an AFM square lattice, J x =0.235 meV, J y =2.014 meV, and an easy-axis single-ion anisotropy D=−1.622 meV (after renormalization). The anisotropy of the exchanges is supported by density functional theory.

2-dimensional systems↗
DOE OSTI2019

Experimental Study of Residual Stresses in Hybrid Laser Arc and Submerged Arc-Welded 10-mm-Thick Low-Carbon Steel Plates

Offshore structures are constantly exposed to a multihazard marine environment that threatens their structural integrity. This imposes a high risk for extensive structural failures while various deterioration mechanisms may degrade the available capacity of the structures. Thus, no reliable decisions can be reached regarding design, operation, and survivability of the structures unless a deep comprehension of their fatigue performance is available, including welding-induced residual stresses. In particular, the continuous increase in size of the weldments for the offshore wind industry needs special attention with regard to welding-induced residual stresses, as they can reduce fatigue life, promote distortion, and contribute to stress corrosion cracking. Thus, the current design methods and increased structural dimensions as well as new design and manufacturing methods need to be inspected, understood, and optimized. Related to this, there is a growing need for evaluation of the effect of welding methods with various heat input density distributions. This article deals with the influence of welding method on the welding-induced residual stresses in 10-mm-thick low-carbon structural steel plates. The residual stresses are investigated in hybrid laser-arc welded and submerged arc butt-welded steel plates by means of experimental temperature profile measurements and neutron diffraction measurements and in accordance with existing production procedures. The residual stresses were measured at three different depths in the plates. The goal of the analysis is to gain a comprehensive understanding of the distribution and development of residual stresses in relation to the welding method for better control of the residual stresses and distortion. Furthermore, the repeatability of the neutron diffraction measurements is also investigated and reported in this article.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetic structure of magnetoelectric multiferroic HoFeWO 6

The polar magnetic oxide, HoFeWO6, is synthesized, and its crystal structure, magnetic structure, and thermodynamic properties are investigated. HoFeWO 6 forms the polar crystal structure (space group Pna2 1 (#33)) due to the cation ordering of W 6+ and Fe 3+ . An antiferromagnetic transition at T N = 17 K is accompanied by a significant change in magnetic entropy with a value of ≈ 5 J kg -1 K-1 in a 70 kOe applied field. Temperature dependent neutron diffraction and magnetization data indicate that the Fe sublattice orders in a strongly non-collinear and non-coplanar arrangement below T N . The Fe ordering initially leads to induced ordering of the Ho spins such that the Ho spins also show behavior of long-range ordering that is evident from the neutron diffraction measurements. Below T ≈ 4 K, the Ho spins order independently and pull the Fe spins toward the direction of Ho spins. A comparison with the magnetic structures and corresponding ferroelectric properties of other members of RMWO 6 (R = Y, Sm-Tm, M = Cr, Fe, V) family indicate that the spontaneous polarization is due to the magnetic structure specific to the Fe sublattice through magnetoelectric coupling whereas the polarization is independent of the Ho sublattice.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Multiple incommensurate magnetic states in the kagome antiferromagnet Na 2 Mn 3 Cl 8

The kagome lattice can host exotic magnetic phases arising from frustrated and competing magnetic interactions. However, relatively few insulating kagome materials exhibit incommensurate magnetic ordering. Here, we present a study of the magnetic structures and interactions of antiferromagnetic Na 2 Mn 3 Cl 8 with an undistorted Mn 2+ kagome network. Using neutron-diffraction and bulk magnetic measurements, we show that Na 2 Mn 3 Cl 8 hosts two different incommensurate magnetic states, which develop at T N1 = 1.6 K and T N2 = 0.6 K. Magnetic Rietveld refinements indicate magnetic propagation vectors of the form q=(q x , q y , $\frac{3}{2}$), and our neutron-diffraction data can be well described by cycloidal magnetic structures. By optimizing exchange parameters against magnetic diffuse-scattering data, we show that the spin Hamiltonian contains ferromagnetic nearest-neighbor and antiferromagnetic third-neighbor Heisenberg interactions, with a significant contribution from long-ranged dipolar coupling. This experimentally determined interaction model is compared with density-functional-theory simulations. Using classical Monte Carlo simulations, we show that these competing interactions explain the experimental observation of multiple incommensurate magnetic phases and may stabilize multi-q states. Here, our results expand the known range of magnetic behavior on the kagome lattice.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

The lattice parameter – composition relationship of the body centered cubic uranium-niobium alloys

In this paper, in-situ time-of-flight neutron diffraction experiments were performed on uranium-niobium alloy with 6 wt% Nb to study the lattice parameter-composition relationship for the body centered cubic (bcc) alloys. Based on lattice-parameter measurements of Nb-supersaturated γs phase over the range of 450 – 790 °C, an improved Vegard's-type relationship was established for determination of Nb concentrations at elevated temperatures. Neutron diffraction data were also collected as a function of aging time over the 450 - 600 °C range when γs phase decomposed isothermally into the mixture of orthorhombic α-U and Nb-rich bcc phase, as well as at room-temperature on the alloys aged ex-situ at 500 °C up to five years. From these measurements, the average Nb concentrations in the bcc phase were determined based on the Rietveld refinements of weight fraction and mass conservation relations (lever rule). Over the 15at% – 78at% range of Nb concentrations that correspond to different experimental aging times, the lattice parameters at constant temperatures exhibit a nonlinear S-shaped variation with Nb concentration, and the associated excess volumes of mixing can be described by a subregular solution model of the Redlich–Kister type of polynomial. Over the full range of composition the S-shaped deviation from Vegard's law can be modeled using a combination of an elastic continuum model and a perturbation to the radii of the solute atoms in the solvent, suggesting that electronic interactions between solute and solvent atoms could play an important role in the compositional dependence of lattice parameter for the γ-phase U-Nb alloys. While Vegard's law is a straightforward and reasonably good approximation for the bcc solid solutions in the U-Nb system, the Nb concentrations determined from the weight fraction refinements of diffraction data provide internally consistent, mass-conserving estimates of solute redistribution for the monotectoid reaction.

36 MATERIALS SCIENCE↗
DOE OSTI2024

In-plane multi-q magnetic ground state of Na 3 Co 2 SbO 6

We report Na 3 Co 2 SbO 6 is a potential Kitaev magnet with a monoclinic layered crystal structure. Recent investigations of the C3-symmetric sister compound Na 2 Co 2 TeO 6 have uncovered a unique triple-q magnetic ground state, as opposed to a single-q (zigzag) one, prompting us to examine the influence of the reduced structural symmetry of Na 3 Co 2 SbO 6 on its ground state. Neutron diffraction data obtained on a twin-free crystal reveal that the ground state remains a multi-q state, despite the system's strong non-C 3 -symmetric anisotropy. This robustness of multi-q orders suggests that they are driven by a common mechanism in the honeycomb cobaltates, such as interactions beyond the bilinear order. Spin-polarized neutron diffraction results show that the ordered moments are entirely in plane, with each staggered component orthogonal to the propagating wave vector. The inferred ground state appears more compatible with the so-called XXZ easy-plane anisotropy than the Kitaev anisotropy, and features unequal ordered moments reduced by strong quantum fluctuations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Neutron and X-ray analysis of the Fenna–Matthews–Olson photosynthetic antenna complex from Prosthecochloris aestuarii

The Fenna–Matthews–Olson protein from Prosthecochloris aestuarii ( Pa FMO) has been crystallized in a new form that is amenable to high-resolution X-ray and neutron analysis. The crystals belonged to space group H 3, with unit-cell parameters a = b = 83.64, c = 294.78 Å, and diffracted X-rays to ∼1.7 Å resolution at room temperature. Large Pa FMO crystals grown to volumes of 0.3–0.5 mm 3 diffracted neutrons to 2.2 Å resolution on the MaNDi neutron diffractometer at the Spallation Neutron Source. The resolution of the neutron data will allow direct determination of the positions of H atoms in the structure, which are believed to be fundamentally important in tuning the individual excitation energies of bacteriochlorophylls in this archetypal photosynthetic antenna complex. This is one of the largest unit-cell systems yet studied using neutron diffraction, and will allow the first high-resolution neutron analysis of a photosynthetic antenna complex.

solar (fuels), photosynthesis (natural and artific↗
DOE OSTI2025

Magnetic properties of (Mo 2/3 Dy 1/3 ) 2 AlC arc melted polycrystalline samples

Here, this study investigates the structural and magnetic properties of arc-melted (Mo 2/3 Dy 1/3 ) 2 AlC polycrystalline samples, a member of the i-MAX phase family. Temperature-dependent magnetization and specific heat measurements confirm the low-temperature antiferromagnetic transitions around 14 K and 17 K. Neutron diffraction data collected at 4 K reveal the emergence of magnetic Bragg peaks that are not allowed in the paramagnetic space group C2/c, further confirming the presence of antiferromagnetic ordering. The detection of a secondary phase, DyAl 2 , is complicated by overlapping Bragg peaks with the monoclinic phase of (Mo 2/3 Dy 1/3 ) 2 AlC in powder XRD patterns. However, magnetization and neutron diffraction data suggest the presence of DyAl 2 , evidenced by a ferromagnetic phase transition around 62 K.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Influence of stacking fault energy and hydrogen on deformation mechanisms in high Mn austenitic steels during in-situ tensile testing

High Mn austenitic steels are considered an economical alloy system for hydrogen storage and transport applications. This study used stacking fault energy (SFE) as a design parameter to achieve hydrogen embrittlement (HE)-resistant high Mn austenitic alloys. The role of hydrogen on the deformation mechanisms of low (29 mJ/m 2 ) and high SFE (49 mJ/m 2 ) alloys was evaluated through in-situ neutron diffraction during tensile loading. Hydrogen-precharging increased yield strength, partly due to hydrogen-induced lattice distortion (i.e., solute strengthening). Hydrogen accelerated the increase in defect density, including dislocations and stacking faults. The formation of planar deformation structures (twins and stacking faults), relative to dislocations, plays a critical role in promoting hydrogen-assisted fracture. The stacking fault frequency parameter obtained from neutron diffraction quantifies planar deformation tendencies, correlated with HE sensitivity. The higher SFE alloy exhibited greater resistance to HE, associated with the reduced propensity to form stacking faults and twins upon deformation in the hydrogen-precharged condition.

High Mn austenitic steel↗
DOE OSTI2020

Control of Weld Residual Stress in a Thin Steel Plate through Low Transformation Temperature Welding Consumables

Low transformation temperature welding (LTTW) consumables are characterized by a low martensite start temperature and a large fraction of martensite forming in the weld. It can efficiently reduce the tensile residual stress because the volume expansion associated with the martensitic transformation compensates for the thermal contraction during cooling. In this work, a LTTW wire, designated as EH200B, was created for the arc welding of advanced high-strength steel thin plates. In comparison to conventional ER70S-3 wires, this LTTW wire generated an opposite distortion pattern. Neutron diffraction measurements along the center thickness of the welded plates showed the maximum residual stress along the longitudinal direction (LD) in the weld region, and the heat-affected zone (HAZ) immediately adjacent to the weld region was reduced from ~330 MPa to below 240 MPa by using the LTTW wire. A finite element (FE) model was developed to predict the residual stress distributions of the plates welded under these two wires. The simulation results showed reasonable agreement with the volume-average neutron diffraction data. Compressive residual stress in the weld region using the LTTW wire was predicted by the FE method. Electron backscattered diffraction and x-ray diffraction measurements confirmed ~90% martensite was present in the LTTW weld. The fatigue life of DP980 steel lap joint panels using EH200B wire nearly doubled that of ER70S-3 wire. This improvement was attributed to the high strength and low LD residual stress in the weld and HAZ immediately adjacent to the weld.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Understanding the Hydronium Cation in the Solid State: A Study in Synthetic Hydronium Uranyl Phosphate and Arsenate Mineral Systems and Their Irradiation Stability

Here, we present neutron diffraction, electronic structure calculations, and optical vibrational spectroscopic characterization of hydronium uranyl phosphate (HUP), the synthetic analog of chernikovite ((H 3 O)(UO 2 )(PO 4 )·3H 2 O) to gain insight into structural features of the hydronium cation in the solid state. HUP crystallizes in P2 1 /c instead of previously reported P4/ncc 1 at room temperature and Pccn below 302 K. Lower symmetry was required due to hydronium and interstitial water positions within the structure. Crystallographic positions of hydronium cations determined from powder neutron diffraction data are bolstered by Raman and attenuated total reflectance infrared spectroscopic measurements and are further informed by density functional theory with phonon eigenvector analysis for spectral assignments. Finally, HUP and its arsenate analog (trogerite, (H 3 O)(UO 2 )(AsO 4 )·3H 2 O), (HUAs) were studied using He 2+ irradiation as an analog for α radiolysis to investigate the irradiation stability of these phases and the stability of hydronium cations in the solid state. Dose studies were employed wherein each sample was irradiated to 5, 10, 15, 25, and 50 MGy. Structural insight regarding irradiated materials is gained using optical vibrational spectroscopy and powder X-ray diffraction. Surprising irradiation stability of HUAs was found up to 50 MGy of dose, which may have important implications for understanding and modeling the geologic stability of legacy U.

actinides↗
DOE OSTI2021

Helical magnetic order and Fermi surface nesting in noncentrosymmetric ScFeGe

Here, an investigation of the structural, magnetic, thermodynamic, and charge transport properties of noncentrosymmetric hexagonal ScFeGe reveals it to be an anisotropic metal with a transition to a weak itinerant incommensurate helimagnetic state below T N =36 K. Neutron diffraction measurements discovered a temperature and field independent helical wave vector k = (0 0 0.193) with magnetic moments of 0.53 μ B per Fe confined to the ab-plane. Density functional theory calculations are consistent with these measurements and find several bands that cross the Fermi level along the c-axis with a nearly degenerate set of flat bands just above the Fermi energy. The anisotropy found in the electrical transport is reflected in the calculated Fermi surface, which consists of several warped flat sheets along the c-axis with two regions of significant nesting, one of which has a wave vector that closely matches that found in the neutron diffraction. The electronic structure calculations, along with a strong anomaly in the c-axis conductivity at TN, signal a Fermi surface driven magnetic transition, similar to that found in spin density wave materials. Magnetic fields applied in the ab-plane result in a metamagnetic transition with a threshold field of ≈ 6.7 T along with a sharp, strongly temperature dependent discontinuity and a change in sign of the magnetoresistance for in-plane currents. Thus, ScFeGe is an ideal system to investigate the effect of in-plane magnetic fields on a helimagnet with a c-axis propagation vector, where the relative strength of the magnetic interactions and anisotropies determine the topology and magnetic structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Accelerated and heterogeneous corrosion of Cr-doped uranium nitride fuel pellets

The steam oxidation of Cr-doped UN fuel pellets is analyzed during sequential isothermal holds up to 720 °C. In situ neutron diffraction results show how Cr is accommodated in a secondary U 2 CrN 3 phase, leading to the formation of a duplex UN/U 2 CrN 3 microstructure. Under corrosion, the oxidation of the two phases begins at 400 °C for UN and 430 °C for U 2 CrN 3 , respectively. Because the UN phase is preferentially oxidized in the presence of U 2 CrN 3 , addition of Cr in UN based nuclear fuel is found to accelerate the corrosion rate. At 430 °C the oxidation of UN in the UN/U 2 CrN 3 microstructure is ~ 5 times faster than pure UN, increasing to ~19 times faster at 460 °C. The oxidation of U 2 CrN 3 produces UO 2 via the formation of two transient intermediate phases. In situ neutron diffraction enables oxidation processes of UN and U 2 CrN 3 components to be followed separately within the two-phase system.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Progression of creep deformation from grain boundaries to grain interior in Al-Cu-Mn-Zr alloys

Creep mechanisms are studied in θ'-Al 2 Cu-strengthened Al-Cu-Mn-Zr alloys at 300 and 350°C for (i) ACMZ, a base alloy without further alloying elements and (ii) RR350, a commercial alloy with additions of Ni and Co forming distinct grain-boundary precipitates. At high stresses, creep is dominated by dislocations bypassing θ' precipitates within grains via the Orowan mechanism, as evidenced by (i) very high stress exponent (n~20-25) and (ii) α-Al and θ' lattice strains (measured via in-situ neutron diffraction) evolving during creep in a manner consistent with load transfer from the plastically-deforming α-Al matrix to elastically-deforming θ' precipitates. At intermediate stresses, both alloys exhibit a n~3 regime, where α-Al and θ' lattice strains scale near-linearly with applied stress while remaining largely unaffected by strain accumulation, indicating that Orowan looping or dislocation pile-up around θ' is now inactive within the grains. Rather, dislocation motion occurs solely in θ'-precipitate-free zones (θ'-PFZ) where high dislocation densities are observed via TEM after creep deformation. Plastic flow at θ'-PFZ and/or localized pipe diffusion are expected to enable grain-boundary sliding (GBS), which is proposed as the rate-limiting mechanism in the n~3 regime. Ni/Co-rich precipitates at RR350 grain-boundaries, with negligible θ'-PFZ around them, share load (as determined via neutron diffraction) with the α-Al matrix more effectively than θ-Al 2 Cu precipitates at ACMZ grain-boundaries, with wide surrounding θ'-PFZ. So, high creep resistance in the n~3 GBS regime of RR350 is enabled by coarsening-resistant grain-boundary precipitates, forming without concomitant development of weak θ'-PFZ, which effectively share load with the grains.

36 MATERIALS SCIENCE↗