SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Sixty measurements were conducted in support of the KRUSTY component critical measurements. The purpose of these measurements was to provide high quality critical and reactor physics benchmarks that can be used to test neutron cross-sections data used in steady-state and dynamic computer models.
Accurately predicting the production yield of 188 W and 191 Os from enriched 186W metal rings irradiated in HFIR is not straightforward. Two key factors can lead to significant uncertainty or inaccuracy in yield predictions: The effect of neutron flux depression in the dense tungsten metal target. Inaccuracy of the currently published 187 W thermal neutron absorption cross section. This manuscript reports the calculated yields for 188 W, 191 Os, and total osmium mass for the NM-888 target that was irradiated in High Flux Isotope Reactor (HFIR) Cycles 487 and 488. Three different yield calculation methods were used and are described herein. The results are presented in terms of total yield and in terms of yield per target mass. This allows for an approximate estimation of yields for future targets of varying mass loading but with similar irradiation profiles. For more accurate prediction yields, target-specific models that account for target loading, target positioning within HFIR, and accurate HFIR cycle data are required.
Major evaluation efforts have been completed or are underway for actinide fission observables, including fission product yields, PFNS, neutron multiplicity, and neutron-induced cross sections. Energy-dependence and covariances for fission product yields are being developed due to new measurements and modeling efforts.
Zirconium based cladding has been developed for use in light water reactor fuel applications due to the material’s desirable low neutron scattering cross section. To help improve corrosion resistance in accident conditions, such as a loss of coolant accident (LOCA), a chromium coating can be applied to the outer diameter of the Zircaloy tube. Cladding strength at reactor relevant temperatures is important for the structural performance. Stress relaxation creep testing was performed on Cr coated Zircaloy-4 to measure strain rate as a function of stress for 350 and 650°C. These were performed at both 5 ± 1 % and 7.5 ± 1 % strain. The lower temperature provides results near normal operating temperature, while the higher temperature provides results relevant to off-normal conditions where recrystallization will take place. Characterization was also performed to analyze the structure of the Cr coating and Zircaloy-4 as well as the interface between the two.
Small-modular and micro-reactors are part of an emerging nuclear technology aimed to provide power to decentralized grids in civilian, industrial, and defense energy sectors. Resurgence in microreactor research is partly driven by demands for a mobile, safe, and compact energy platform for remote and strategic locations. The defining characteristics of the microreactor include its high-power density on a small footprint, its highly transportable design, and the use of high-assay low-enriched uranium (HALEU) fuel. Solid-state metal hydride neutron moderator components are considered for microreactor designs where the moderator functions to thermalize neutrons into lower energies for the fuel to achieve high fission rates. Zirconium hydride (ZrH x where x denotes the atomic hydrogen-to-metal ratio) is a leading moderator candidate material due to the combination of its low neutron absorption cross section, irradiation resistance, high hydrogen atomic density (upwards of 7.5 x 10 22 H atoms/cm 3 at low temperatures), and high hydrogen desorption (dissociation) temperature around 600 °C (873 K) compared to other metal hydrides. Its high-temperature stability enables operation of fuel temperatures into several hundred degrees Celsius for overall increased efficiency.
MCNPs Easy Sources for Alpha,N (MESA) facilitates the construction of MCNP source definition cards for (α,n) sources. It is a complete re-write of the homogeneous, surface source, and three layer problem types from Sources4c. Please refer to this reference for documentation on the cross-sections and neutron emission spectra. The one departure from Sources4c is the use of alpha energies and activities from the ISC ENDF VII or VIII library specified by the user.
Burnable absorbers (BAs) are used in UO 2 fuels to tune the reactivity in a light water reactor (LWR) particularly at the beginning of life of the fuel. BAs are elements that have high neutron absorption cross sections and because of this property can prevent power peaking. The addition of BAs reduces the reactivity at the beginning of life, and this in turn allows for the increase of enrichments from > 5 % 235 U up to ~ 10 %. This also enables the increase of the burnup limit to 75 GWd/MTU and the cycle length to 24 months. The BA are eventually consumed under irradiation, and their concentration is diminished at roughly 10-20 GWd/MTU. The objective of this report is to fabricate UO 2 fuels that have been doped with BAs (Gd 2 O 3 in this case) and subsequently irradiate them in the high flux isotope reactor (HFIR) at Oak Ridge National Laboratory. The test specimen that are fabricated include 4 and 8 weight % Gd 2 O 3 doped UO 2 to investigate the influence of the BAs on the thermophysical properties and microstructure of the fresh and irradiated fuel.
Nuclear fuel encounters severe thermomechanical environments in which its mechanical response is determined by its microstructure, temperature and stress level histories. Simulating the response of such microstructures is crucial for predicting both performance and transient fuel mechanical responses and experimental verification of such predictions is therefore of great interest. While most of the deformation in a nuclear fuel rod occurs in the cladding, deformation of the fuel itself is still of interest with deformation mechanisms at operating temperature and above including creep, swelling, cracking as well as pellet-clad interaction. Characterization of these properties and understanding of the underlying deformation phenomena at operating or excursion temperatures is therefore of great importance for development and ultimately licensing of improved and novel nuclear fuel forms. Diffraction techniques offer unique insight on the atomistic (e.g. crystal structure) and microstructure (e.g. phase transformations, texture, defects) length scales and have a long history of providing unique data to inform relevant deformation models that enable the required predictive capabilities. For example, dislocations lead to diffraction peak broadening that can be characterized to estimate the dislocation density and study the role of dislocations on the deformation while measuring lattice strains allows to studie load sharing in two phase materials. In this report the requirements for a sample environment for high temperature deformation of nuclear fuels are defined. The HIPPO neutron time-of-flight diffractometer at LANSCE will host this sample environment and is also described. This instrument covers diffraction angles from 140° to 40° and is also equipped with an event-mode neutron imaging detector system, enabling energy-resolved neutron imaging in parallel with the diffraction that could measure sample temperature from Doppler broadening of neutron absorption resonances or measure pore densities from changes in the attenuation. Designs of devices to characterize thermomechanical properties of nuclear fuel without diffraction are also considered to guide the design. While this report is focused on applications for nuclear fuels, the device can also characterize cladding, moderator or structural materials and therefore contribute to other fields of research and development for advanced reactors. The temperatures planned to be reached are above 2000℃, thus enabling characterization of LWR reactor fuels under accident scenarios but also reaching temperatures of fuels developed for nuclear thermal propulsion and providing opportunities to characterize those. In conjunction with the energy-resolved neutron imaging detector, this setup would allow to measure neutron cross-sections at high temperatures, filling a gap towards development of reactors operating at high temperatures.
With renewed interest for the next generation of small modular reactors and space-based nuclear reactors, metal hydrides have been a focus of research for moderating materials to reduce the need for highly enriched fuel to maintain small core sizes. Yttrium hydride (YH) is an attractive candidate for these metal hydrides due to its ability to retain hydrogen at elevated temperatures as well as the low neutron absorption cross section of yttrium metal. Given the necessity for reactors to operate at elevated temperatures for extended periods of time, understanding hydrogen retention in moderator channels in simulated operating thermal conditions is paramount in predicting reactor performance and the long-term stability of YH. Additionally, coating strategies on the moderator encapsulating will be explored to ascertain if it aids in retention of hydrogen within the capsule and moderator.
Xenon isotope measurements in relation to Earth atmosphere abundance and concentration in meteorite, noting neutron capture
GAROL computer program for neutron resonance absorption
Radiation shield penetration calculation from invariant imbedding method
Plutonium-beryllium source neutron dating in water and mixtures of tungsten rods and water
Systematics of fission based on exponential mass formula, discussing neutron capture
Neutron capture reactions and stellar nucleosynthesis - heavy element buildup
Neutron production cross sections prediction at proton bombarding energies below 50 Mev and above threshold for multiple nucleon emission
Thermal neutron capture cross section at high temperature irradiations determined for W 184, describing radiochemical separation and flux counting techniques
Heating rate measurements made in a mock-up of a BeO heat shield for a gas core nuclear rocket engine yields results nominally a factor of two greater than calculated by two different methods. The disparity is thought to be caused by errors in neutron capture cross sections and gamma spectra from the low cross-section elements, D, O, and Be.