Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Net Zero Energy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Integrated distribution system and urban district planning with high renewable penetrations

Recent efforts to reduce energy consumption and greenhouse gas emissions have resulted in the development of sustainable, smart districts with highly energy efficient buildings, renewable distributed energy resources (DERs), and support for alternative modes of transportation. However, there is typically little if any coordination between the district developers and the local utility. Most attention is paid to the district's annual net load and generation without considering their instantaneous imbalance or the connecting network's state. This presents an opportunity to learn lessons from the design of distribution feeders for districts characterized by low loads and high penetrations of DERs that can be applied to the distribution grid at large. The aim of this overview is to summarize current practices in sustainable district planning as well as advances in modeling and design tools for incorporating the power distribution system into the district planning process. Recent developments in the modeling and optimization of district power systems, including their coordination with multi-energy systems and the impact of high penetration levels of renewable energy, are introduced. Sustainable districts in England and Japan are reviewed as case studies to illustrate the extent to which distribution system planning has been considered in practice. Finally, newly developed building-to-grid modeling tools that can facilitate coordinated district and power system design with utility involvement are introduced, along with suggestions for future research directions.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Equity implications of net-zero emissions: A multi-model analysis of energy expenditures across income classes under economy-wide deep decarbonization policies

With companies, states, and countries targeting net-zero emissions around midcentury, there are questions about how these targets alter household welfare and finances, including distributional effects across income groups. This paper examines the distributional dimensions of technology transitions and net-zero policies with a focus on welfare impacts across household incomes. The analysis uses a model intercomparison with a range of energy-economy models using harmonized policy scenarios reaching economy-wide, net-zero CO 2 emissions across the United States in 2050. Here we employ a novel linking approach that connects output from detailed energy system models with survey microdata on energy expenditures across income classes to provide distributional analysis of net-zero policies. Although there are differences in model structure and input assumptions, we find broad agreement in qualitative trends in policy incidence and energy burdens across income groups. Models generally agree that direct energy expenditures for many households will likely decline over time with reference and net-zero policies. However, there is variation in the extent of changes relative to current levels, energy burdens relative to reference levels, and electricity expenditures. Policy design, primarily how climate policy revenues are used, has first-order impacts on distributional outcomes. Net-zero policy costs, in both absolute and relative terms, are unevenly distributed across households, and relative increases in energy expenditures are higher for lowest-income households. However, we also find that recycled revenues from climate policies have countervailing effects when rebated on a per-capita basis, offsetting higher energy burdens and potentially even leading to net progressive outcomes. Model results also show carbon Laffer curves, where revenues from net-zero policies increase but then decline with higher stringencies, which can diminish the progressive effects of climate policies. We also illustrate how using annual income deciles for distributional analysis instead of expenditure deciles can overstate the progressivity of emissions policies by overweighting revenue impacts on the lowest-income deciles.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Design and Operation of Energy Systems with Large Amounts of Variable Generation: IEA Wind TCP Task 25 (Final Summary Report)

This report summarizes findings on wind integration from the 17 countries or sponsors participating in the International Energy Agency Wind Technology Collaboration Program (IEA Wind TCP) Task 25 from 2006-2020. Both real experience and studies are reported. Many wind integration studies incorporate solar energy, and most of the results discussed here are valid for other variable renewables in addition to wind. The national case studies address several impacts of wind power on electric power systems. In this report, they are grouped under long-term planning issues and short-term operational impacts. Long-term planning issues include grid planning and capacity adequacy. Short-term operational impacts include reliability, stability, reserves, and maximizing the value of wind in operational timescales (balancing related issues). The first section presents the variability and uncertainty of power system-wide wind power, and the last section presents recent studies toward 100% shares of renewables. The appendix provides a summary of ongoing research in the national projects contributing to Task 25 for 2021-2024. The design and operation of power and energy systems is an evolving field. As ambitious targets toward net-zero carbon energy systems are announced globally, many scenarios are being made regarding how to reach these future decarbonized energy systems, most of them involving large amounts of variable renewables, mainly wind and solar energy. The secure operation of power systems is increasingly challenging, and the impacts of variable renewables, new electrification loads together with increased distribution system resources will lead to somewhat different challenges for different systems. Tools and methods to study future power and energy systems also need to evolve, and both short-term operational aspects (such as power system stability) and long-term aspects (such as resource adequacy) will probably see new paradigms of operation and design. The experience of operating and planning systems with large amounts of variable generation is accumulating, and research to tackle the challenges of inverter-based, nonsynchronous generation is on the way. Energy transition and digitalization also bring new flexibility opportunities, both short and long term.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Advancing Nuclear Energy to Support a Net-Zero Future

Seminar for the KEPCO International Nuclear Graduate School (KINGS) in South Korea. The presentation will cover a brief introduction to INL, opportunities for advanced nuclear, and integrated energy systems.

08 HYDROGEN↗

Innovative Pathways to Net Zero Emissions: Subnational Strategies for Distributed Solar Deployment to Improve Grid Quality and Reduce Energy Costs in Argentina

Through Net Zero World, the National Renewable Energy Laboratory (NREL), the National Energy Secretariat of Argentina, La Pampa's Energy and Mining Secretariat, Pampetrol, and the Administracion Provincial de Energia de La Pampa (APELP) conducted an integrated analysis of the power system of the La Pampa province in Argentina. The study assessed the impact that solar and battery energy storage systems could have on the region grid's reliability and electricity costs, providing insights into long-term decarbonization strategies across Argentina. The analysis demonstrated that these systems are expected not only to help with decarbonization efforts but also to bolster grid resiliency, reduce line losses, and improve voltage regulation while lowering electricity costs. The paper offers a replicable framework for similar studies across other Argentine provinces, which could inform a national grid reliability plan and promote regional coordination. Such coordination will play a key role in supporting a nationwide clean energy transition as Argentina increases its share of renewable energy. By coordinating subnational energy plans with national strategies, Argentina can secure a resilient clean energy future, leveraging the substantial renewable resources available across its provinces.

14 SOLAR ENERGY↗

Modeling, design and thermal performance of a BIPV/T system thermally coupled with a ventilated concrete slab in a low energy solar house: Part 1, BIPV/T system and house energy concept

This paper is the first of two papers that describe the modeling, design, and performance assessment based on monitored data of a building-integrated photovoltaic-thermal (BIPV/T) system thermally coupled with a ventilated concrete slab (VCS) in a prefabricated, two-storey detached, low energy solar house. This house, with a design goal of near net-zero annual energy consumption, was constructed in 2007 in Eastman, Quebec, Canada - a cold climate area. Several novel solar technologies are integrated into the house and with passive solar design to reach this goal. An air-based open-loop BIPV/T system produces electricity and collects heat simultaneously. Building-integrated thermal mass is utilized both in passive and active forms. Distributed thermal mass in the direct gain area and relatively large south facing triple-glazed windows (about 9% of floor area) are employed to collect and store passive solar gains. An active thermal energy storage system (TES) stores part of the collected thermal energy from the BIPV/T system, thus reducing the energy consumption of the house ground source heat pump heating system. This paper focuses on the BIPV/T system and the integrated energy concept of the house. Monitored data indicate that the BIPV/T system has a typical efficiency of about 20% for thermal energy collection, and the annual space heating energy consumption of the house is about 5% of the national average. A thermal model of the BIPV/T system suitable for preliminary design and control of the airflow is developed and verified with monitored data. (author)

14 SOLAR ENERGY↗

Building America Best Practices Series - Volume 12: Builders Challenge Guide to 40% Whole-House Energy Savings in the Cold and Very Cold Climates

This best practices guide is the twelfth in a series of guides for builders produced by PNNL for the U.S. Department of Energy’s Building America program. This guide book is a resource to help builders design and construct homes that are among the most energy-efficient available, while addressing issues such as building durability, indoor air quality, and occupant health, safety, and comfort. With the measures described in this guide, builders in the cold and very cold climates can build homes that have whole-house energy savings of 40% over the Building America benchmark with no added overall costs for consumers. The best practices described in this document are based on the results of research and demonstration projects conducted by Building America’s research teams. Building America brings together the nation’s leading building scientists with over 300 production builders to develop, test, and apply innovative, energy-efficient construction practices. Building America builders have found they can build homes that meet these aggressive energy-efficiency goals at no net increased costs to the homeowners. Currently, Building America homes achieve energy savings of 40% greater than the Building America benchmark home (a home built to mid-1990s building practices roughly equivalent to the 1993 Model Energy Code). The recommendations in this document meet or exceed the requirements of the 2009 IECC and 2009 IRC and thos erequirements are highlighted in the text. This document will be distributed via the DOE Building America website: www.buildingamerica.gov.

Builders Challenge↗

Nuclear Energy for Economy-wide Net Zero Solutions: Advancing Nuclear-Hydrogen Production

This presentation was prepared for the Canadian Standards Association Virtual Seminar on Hydrogen Production using Nuclear Energy, held on February 15, 2022. The presentation introduces the US DOE program on Integrated Energy Systems and provides an overview of the Light Water Reactor Sustainability projects to demonstrate hydrogen production at operating nuclear plants in the US.

08 HYDROGEN↗

Energy Impact of Radiative Cooling Paints in Warehouses Under Various United States Climates

Although radiative cooling research is widely found in the literature, no comprehensive study has yet been conducted on the impact of novel radiant cooling (>0.91 reflectance) on the energy efficiency of warehouses. Here, in this work, we develop three building models based on a Department of Energy prototype warehouse model using trnsys, representing a typical warehouse with a black roof, a typical warehouse with a white roof, and a warehouse with novel radiative cooling (RC) paint on its roof. These models are run for 15 different cities, each representative of a different ASHRAE climate zone, to better understand the impact of RC in many different climates. It was found that an RC-coated roof in a warehouse could reduce the building's annual heating, ventilation, and air conditioning (HVAC) loads by up to 14.11 kWh/m 2 of the roof area compared to a black roof, resulting in a maximum reduction in energy costs of 0.55 $\$$/m 2 or $\$$2646/year for a large 4835 m 2 warehouse. Similarly, replacing the typical white roof coating with an RC coating could reduce the warehouse's energy consumption by up to 8.17 kWh/ m 2 of roof area, thus reducing energy costs by as much as 0.29 $\$$/m 2 or $\$$1386/year for a 4835 m 2 warehouse. In addition, applying RC paint to an unconditioned warehouse could reduce the building's ASHRAE Standard 55 indoor temperature exceedance by up to 1330 h/year compared to a black roof and up to 532 h/year compared to a white roof.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

ORNL Solar Array Dedication

ORNL has dedicated a solar array that will provide over 50 kilowatts of power to the laboratory.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Renewable Energy Systems in the Transition of North America to Net Zero Emissions

The North American transition to low-carbon energy sources depends on the technology decisions of its diverse communities and stakeholders. Each region and industry will have its own portfolio of renewable energy technologies to meet the common goal of net zero emissions. Our presentation will share integrated renewable energy solutions being explored at scale by major U.S cities, rural regions dependent on oil and gas, and industries redefining their infrastructure and their missions. Case examples will be presented on: the Los Angeles 100% renewable energy goals; challenges and opportunities of decarbonizing and reducing emissions from the oil and gas industry; repurposing oil and gas infrastructure such as using pipelines for hydrogen blends and renewable natural gas and idle wells for geothermal energy and energy storage; treatment of produced water using renewable energy for agriculture applications; and the preserving water and agricultural resources in the transition to renewable energy. Key challenges will also be discussed, including resilience to increasing disasters, stranded assets, unequal community impact, and meeting the last 5-20% of energy with renewable energy.

challenges↗

A Novel Framework to Evaluate the Costs and Potential of Bioenergy in Decarbonization of the U.S. Economy

The long-term strategy of the United States targets reaching economy-wide net-zero emissions by 2050 and a carbon-neutral electricity grid by 2035 (U.S. Department of State and U.S. Executive Office of the President, 2021). Meeting these targets would require considerable changes to the energy system. Some key characteristics of illustrative net-zero energy systems include increased penetration of renewable energy and carbon sources, use of CO2 capture and storage (CCS) in hard-to-abate sectors, and a greater role for energy carriers such as electricity and hydrogen (Davis et al, 2018). Another common feature of such energy systems is the need for carbon dioxide removal (CDR) approaches (Horowitz et al, 2022). Across all these characteristics of net-zero energy systems, bioenergy and biomass feedstock is anticipated to play an important role. Biomass feedstock serves as a renewable carbon source. This can enable conversion of such feedstock into fuels and energy carriers for hard-to-abate sectors such as aviation. Indeed, the U.S. Government has a target to meet all jet fuel demand by 2050 from sustainable aviation fuel (SAF), where biofuel pathways are likely to have an important role (EERE, 2020). Bioenergy is also highly versatile with the possibility to convert feedstock into electricity, hydrogen, liquid fuels, heat or high-value products, based on biomass type, demand and technology availability (Clarke et al, 2022). Combination of bioenergy with CCS can also nominally deliver CDR (Fuhrman et al, 2023). As such, the share of bioenergy is expected to grow by at least five time across scenarios studied for the long-term strategy of the U.S. between 2020 and 2050 (Horowitz et al, 2022). Notwithstanding the role of bioenergy in the energy systems, its deployment, costs and scalability are influenced by a number of factors. Some of these factors pertain to policy interventions such as imposition of a binding decarbonization target either at an economy-wide level or the sectoral level. Resource availability and type of biomass feedstock also varies considerably across regions. From a technological perspective, the readiness of bioenergy conversion pathways is subject to high variability. This influences the costs of deployment. Moreover, the sourcing of feedstock, grid carbon intensity, and co-product handling approaches all affect the life cycle efficacy of bioenergy. The latter, in turn, is particularly important in determining the extent to which bioenergy with CCS or BECCS can effectively deliver CDR (Fajardy and Mac Dowell, 2017).

air emission↗

Pathways to a net-zero-carbon water sector through energy-extracting wastewater technologies

The energy-consuming and carbon-intensive wastewater treatment plants could become significant energy producers and recycled organic and metallic material generators, thereby contributing to broad sustainable development goals, the circular economy, and the water-energy-sanitation-food-carbon nexus. This review provides an overview of the waste(water)-based energy-extracting technologies, their engineering performance, techno-economic feasibility, and environmental benefits. Here, we propose four crucial strategies to achieve net-zero carbon along with energy sufficiency in the water sector, including (1) improvement in process energy efficiency; (2) maximizing on-site renewable capacities and biogas upgrading; (3) harvesting energy from treated effluent; (4) a new paradigm for decentralized water-energy supply units.

54 ENVIRONMENTAL SCIENCES↗

Realizing High-Performance Buildings

High-performance buildings (HPBs) are exceptional examples of both design and practice. Their energy footprints are small, and these are buildings that people want to work in because of their intelligent structure, operations, and coincident comfort. However, the operation of most buildings, even ones that are properly constructed and commissioned at the start, can deviate significantly from the original design intent over time, particularly due to control system overrides and growing plug and data center loads. With early planning for systems such as submetering and occupant engagement tools, operators can identify and remedy the problems. This guide is a primer for owners and owners' representatives who are pursuing HPBs. It describes processes that have been successful in the planning, procurement, and operation of HPBs with exceptional energy efficiency. Much of the guidance offered results from a series of semi-structured conference calls with a technical advisory group of 15 owners and operators of prominent HPBs in the United States. The guide provides a prescription for planning, achieving, and maintaining an HPB. Although the guide focuses on the operations stage of buildings, many of the operations practices are specified during the planning stage.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DOE Zero Energy Ready Home Case Study: Clifton View Homes, Coupeville, Washington

Ted Clifton, founder of Clifton View Homes, achieved an impressive Home Energy Rating System (HERS) score of 34 (without solar panels) on a two-story home completed in July 2011 that also earned him his first Challenge Home certification from the U.S. Department of Energy (DOE). This home also garnered a 2013 Housing Innovation Award in the "systems builder" category.

Challenge Home↗

Optimizing Distributed Energy Resources and building retrofits with the strategic DER-CAModel

The pressuring need to reduce the import of fossil fuels as well as the need to dramatically reduce CO 2 emissions in Europe motivated the European Commission (EC) to implement several regulations directed to building owners. Most of these regulations focus on increasing the number of energy efficient buildings, both new and retrofitted, since retrofits play an important role in energy efficiency. Overall, this initiative results from the realization that buildings will have a significant impact in fulfilling the 20/20/20-goals of reducing the greenhouse gas emissions by 20%, increasing energy efficiency by 20%, and increasing the share of renewables to 20%, all by 2020. The Distributed Energy Resources Customer Adoption Model (DER-CAM) is an optimization tool used to support DER investment decisions, typically by minimizing total annual costs or CO 2 emissions while providing energy services to a given building or microgrid site. This document shows enhancements made to DER-CAM to consider building retrofit measures along with DER investment options. Specifically, building shell improvement options have been added to DER-CAM as alternative or complementary options to investments in other DER such as PV, solar thermal, combined heat and power, or energy storage. The extension of the mathematical formulation required by the new features introduced in DER-CAM is presented and the resulting model is demonstrated at an Austrian Campus building by comparing DER-CAM results with and without building shell improvement options. Strategic investment results are presented and compared to the observed investment decision at the test site. Results obtained considering building shell improvement options suggest an optimal weighted average U value of about 0.53 W/(m 2 K) for the test site. This result is approximately 25% higher than what is currently observed in the building, suggesting that the retrofits made in 2002 were not optimal. Furthermore, the results obtained with DER-CAM illustrate the complexity of interactions between DER and passive measure options, showcasing the need for a holistic optimization approach to effectively optimize energy costs and CO 2 emissions. Lastly, the simultaneous optimization of building shell improvements and DER investments enables building owners to take one step further towards nearly zero energy buildings (nZEB) or nearly zero carbon emission buildings (nZCEB), and therefore support the 20/20/20 goals.

25 ENERGY STORAGE↗

Industry Research and Recommendations for New Commercial Buildings

Researchers evaluated industry needs and developed logic models to support possible future commercial new construction research and deployment efforts that could be led or supported by DOE's Commercial Building Integration program or other national initiatives. The authors believe that these recommendations support a proposed course of action from the current state of commercial building energy efficiency to a possible long-term goal of achieving significant market penetration of cost-effective NZE buildings in all building sectors and climates by 2030.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Beneficial CHP – Is that a Thing? Considering CHP in the Context of Beneficial Electrification

For decades, combined heat and power (CHP) has been promoted and embraced as a cost-effective technology for meeting on-site thermal and electric needs more efficiently and with fewer emissions than separate procurement of those resources. But climate change concerns are leading to a reevaluation of CHP’s benefits. Significantly, natural gas, the most common fuel for CHP and until recently regarded as an environmentally preferable “bridge fuel” in the energy transition to renewables, is increasingly being reexamined amid calls for deep decarbonization and emerging clean energy policies that limit the use of natural gas. Given this trend, electrification has gained traction as a net zero carbon energy strategy. With natural gas being a preferred fuel for CHP, policymakers and others are beginning to question CHP’s role in a cleaner, more electrified future. However, CHP fueled by low carbon fuels such as renewable natural gas and hydrogen may be a more viable path to decarbonizing industrial processes that are difficult to electrify due to technology limitations or cost, and for applications where energy resilience is a critical requirement. This paper seeks to add clarity to a complex issue. It offers a framework for assessing industrial applications where natural gas CHP will provide significant GHG reductions in the near term and provide a more economic and practical path to deep decarbonization in the long term through a transition to low carbon fuels.

Hedman, Bruce↗