Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “NIOBATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

High temperature sensor/microphone development for active noise control

The industrial and scientific communities have shown genuine interest in electronic systems which can operate at high temperatures, among which are sensors to monitor noise, vibration, and acoustic emissions. Acoustic sensing can be accomplished by a wide variety of commercially available devices, including: simple piezoelectric sensors, accelerometers, strain gauges, proximity sensors, and fiber optics. Of the several sensing mechanisms investigated, piezoelectrics were found to be the most prevalent, because of their simplicity of design and application and, because of their high sensitivity over broad ranges of frequencies and temperature. Numerous piezoelectric materials are used in acoustic sensors today; but maximum use temperatures are imposed by their transition temperatures (T(sub c)) and by their resistivity. Lithium niobate, in single crystal form, has the highest operating temperature of any commercially available material, 650 C; but that is not high enough for future requirements. Only two piezoelectric materials show potential for use at 1000 C; AlN thin film reported to be piezoactive at 1150 C, and perovskite layer structure (PLS) materials, which possess among the highest T(sub c) (greater than 1500 C) reported for ferroelectrics. A ceramic PLS composition was chosen. The solid solution composition, 80% strontium niobate (SN) and 20% strontium tantalate (STa), with a T(sub c) approximately 1160 C, was hot forged, a process which concurrently sinters and renders the plate-like grains into a highly oriented configuration to enhance piezo properties. Poled samples of this composition showed coupling (k33) approximately 6 and piezoelectric strain constant (d33) approximately 3. Piezoactivity was seen at 1125 C, the highest temperature measurement reported for a ferroelectric ceramic. The high temperature piezoelectric responses of this, and similar PLS materials, opens the possibility of their use in electronic devices operating at temperatures up to 1000 C. Concurrent with the materials study was an effort to define issues involved in the development of a microphone capable of operation at temperatures up to 1000 C; important since microphones capable of operation above 260 C are not generally available. The distinguishing feature of a microphone is its diaphragm which receives sound from the atmosphere: whereas, most other acoustic sensors receive sound through the solid structure on which they are installed. In order to gain an understanding of the potential problems involved in designing and testing a high temperature microphone, a prototype was constructed using a commercially available lithium niobate piezoelectric element in a stainless steel structure. The prototype showed excellent frequency response at room temperature, and responded to acoustic stimulation at 670 C, above which temperature the voltage output rapidly diminished because of decreased resistivity in the element. Samples of the PLS material were also evaluated in a simulated microphone configuration, but their voltage output was found to be a few mV compared to the 10 output of the prototype.

Shrout, Thomas R.↗

Optimized Wavelength-Tuned Nonlinear Frequency Conversion Using a Liquid Crystal Clad Waveguide

An optimized wavelength-tuned nonlinear frequency conversion process using a liquid crystal clad waveguide. The process includes implanting ions on a top surface of a lithium niobate crystal to form an ion implanted lithium niobate layer. The process also includes utilizing a tunable refractive index of a liquid crystal to rapidly change an effective index of the lithium niobate crystal.

Stephen, Mark A.↗

Effect of isovalent substitution on microstructure and phase transition of LaNb{sub 1−x}M{sub x}O{sub 4} (M=Sb, V or Ta; x=0.05–0.3)

LaNb{sub 1−x}M{sub x}O{sub 4} oxides with pentavalent elements of different ionic sizes (M=Sb, Ta and V, x=0.05–0.3) were synthesized by the solid state reaction method. Special interest was devoted to the antimony substituted lanthanum niobate which is a new material in this group. Rietveld analysis of the X-ray diffraction patterns was used to determine the influence of the material composition on unit cell parameters. On the basis of dilatometric measurements phase transition temperatures and thermal expansion coefficients of the studied materials were determined. It was shown that with increasing concentration of Sb the phase transition temperature decreases. Thermal expansion coefficient of the antimony substituted samples above the transition temperature is in the range from 8.1 to 9.1×10{sup −6} 1/K, whereas below the transition temperature the TEC value is between 14 and 17.3×10{sup −6} 1/K. Influence of Ta, V and Sb substitutions on the microstructure and grain size was studied. - Graphical abstract: Substitution of niobium by other pentavalent elements in LaNbO{sub 4} leads to change in phase transition temperature. In case of Sb substituent a shift of phase transition into the lower temperature region is observed. LaNb{sub 0.7}Sb{sub 0.3}O{sub 4} substitution allows to achieve material with tetragonal crystal structure at room temperature and no phase transition up to 1000 °C. - Highlights: • Antimony doped lanthanum niobate was successfully synthesized by solid state synthesis method. • The structural properties have been investigated by XRD and SEM. • The influence of doping on phase transition temperature has been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and electrical properties of NaNbO{sub 3}

Graphical abstract: Display Omitted Highlights: ► Crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were synthesized. ► Conductivity goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. ► Activation energies are in the order of 0.893, 0.507, 0.819 and 0.105 eV. -- Abstract: Triangular prism-like of crystalline rhombohedral sodium niobate (r-NaNbO{sub 3}) were prepared from Nb{sub 2}O{sub 5} in the presence of NaOH via a hydrothermal method at 180 °C for 6 h. Techniques X-ray diffraction, scanning electron microscopy, Fourier transform infrared, Raman and impedance spectroscopy have been used to characterize the structure, morphology, composition and electrical properties of the material. Electrical conductivity measurements showed that the as synthesized r-NaNbO{sub 3} triangular prism has a conductivity value which goes from 5.5 × 10{sup −6} Ω{sup −1} cm{sup −1} at 280 °C to 7.61 × 10{sup −4} Ω{sup −1} cm{sup −1} at 780 °C. The Arrhenius diagram is not linear; it presents four regions of conductivity. The corresponding activation energies are, respectively, in the order of 0.893, 0.507, 0.819 and 0.105 eV, deduced from the Arrhenius relation.

36 MATERIALS SCIENCE↗

Synthesis, properties and phase transitions of pyrochlore- and fluorite-like Ln{sub 2}RMO{sub 7} (Ln = Sm, Ho; R = Lu, Sc; M = Nb, Ta)

Graphical abstract: Temperature dependences of bulk conductivity for Sm{sub 2}ScTaO{sub 7} pyrochlore prepared at (1) 1400 °C, 20 h; and (2) 1200 °C, 40 h. - Highlights: • The phase formation of Ln{sub 2}RMO{sub 7} (Ln = Sm, Ho; R = Lu, Sc; M = Nb, Ta) at 1200–1600 °C. • The bulk conductivity and magnetic susceptibility were measured. • The bulk conductivity of Sm{sub 2}ScTaO{sub 7} has oxygen ion type at T ≥ 750 °C. • The first-order structural phase transition was observed in Sm{sub 2}ScTaO{sub 7} at ∼650–700 °C. • This phase transformation is not typical for defect fluorites. - Abstract: We have studied the new compounds with fluorite-like (Ho{sub 2}RNbO{sub 7} (R = Lu, Sc)) and pyrochlore-like (Sm{sub 2}ScTaO{sub 7}) structure as potential oxide ion conductors. The phase formation process (from 1200 to 1600 °C) and physical properties (electrical, thermo mechanical, and magnetic) for these compounds were investigated. Among the niobate materials the highest bulk conductivity is offered by the fluorite-like Ho{sub 2}ScNbO{sub 7} synthesized at 1600 °C: 3.8 × 10{sup −5} S/cm at 750 °C, whereas in Sm system the highest bulk conductivity, 7.3 × 10{sup −6} S/cm at 750 °C, is offered by the pyrochlore Sm{sub 2}ScTaO{sub 7} synthesized at 1400 °C. In Sm{sub 2}ScTaO{sub 7} pyrochlore we have observed the first-order phase transformation at ∼650–700 °C is related to rearrangement process in the oxygen sublattice of the pyrochlore structure containing B-site cations in different valence state and actually is absent in the defect fluorites. The two holmium niobates show Curie–Weiss paramagnetic behavior, with the prevalence of antiferromagnetic coupling. The magnetic susceptibility of Sm{sub 2}ScTaO{sub 7} is a weak function of temperature, corresponding to Van Vleck paramagnetism.

36 MATERIALS SCIENCE↗

Comparative study on light-induced absorption between MgO:LiNbO{sub 3} and MgO:LiTaO{sub 3}

A comparative study on the light-induced absorption was performed for lithium niobate and lithium tantalate crystals in which the antisite defects were eliminated by MgO doping. The induced absorption was measured in a spectral window ranging from visible to near infrared with a time resolution of 10 ns. Upon pulsed-light irradiation, a broad absorption peaking near 1250 nm was induced in MgO-doped lithium niobate. It was attributed to the small free polaron, an electron trapped at the regular Nb ion site. In contrast, such absorption in the near infrared originating from the free polaron was absent in MgO-doped lithium tantalates. The findings are highly relevant to the frequency conversion performances of high-power and pulsed lasers based on the current periodically-poled devices. The results also suggest guidelines for improving the crystal qualities.

36 MATERIALS SCIENCE↗

A study of structural, optical and dielectric properties of crystalline Sr{sub 2}Nb{sub 2}O{sub 7} nanoparticles synthesized by a modified combustion technique

Nanocrystalline Strontium Pyroniobate is synthesized by a novel auto-igniting combustion technique. The X-Ray diffraction studies reveal that Strontium Niobate possesses orthorhombic structure. Phase purity and structure of the nanopowder is further examined using Fourier-Transform Infrared and Raman spectroscopy. The average particle size of the as prepared nanoparticles from the Transmission Electron Microscopy is 30 nm. Sr{sub 2}Nb{sub 2}O{sub 7} is a photoluminescent material and the optical band gap determined from the UV-DRS spectrum is 2.7eV. The sample is sintered at an optimized temperature of 1350°C for 2 hours and obtained maximum density. The dielectric constant and loss factor values obtained at 5MHz for a well-sintered Strontium Niobate pellet is found to be 40 and 3.9×10{sup −3} respectively, at room temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Micro- and nanodomain imaging in uniaxial ferroelectrics: Joint application of optical, confocal Raman, and piezoelectric force microscopy

The application of the most effective methods of the domain visualization in model uniaxial ferroelectrics of lithium niobate (LN) and lithium tantalate (LT) family, and relaxor strontium-barium niobate (SBN) have been reviewed in this paper. We have demonstrated the synergetic effect of joint usage of optical, confocal Raman, and piezoelectric force microscopies which provide extracting of the unique information about formation of the micro- and nanodomain structures. The methods have been applied for investigation of various types of domain structures with increasing complexity: (1) periodical domain structure in LN and LT, (2) nanodomain structures in LN, LT, and SBN, (3) nanodomain structures in LN with modified surface layer, (4) dendrite domain structure in LN. The self-assembled appearance of quasi-regular nanodomain structures in highly non-equilibrium switching conditions has been considered.

36 MATERIALS SCIENCE↗

Modifying the chemistry of graphene with substrate selection: A study of gold nanoparticle formation

Graphene and metal nanoparticle composites are a promising class of materials with unique electronic, optical, and chemical properties. In this work, graphene is used as a reducing surface to grow gold nanoparticles out of solution-based metal precursors. The nanoparticle formation is found to strongly depend upon the graphene substrate selection. The studied substrates include diamond, p-type silicon, aluminum oxide, lithium niobate, and copper. Our results indicate that the chemical properties of graphene depend upon this selection. For example, for the same reaction times and concentration, the reduction of gold chloride to gold nanoparticles on graphene/lithium niobate results in 3% nanoparticle coverage compared to 20% coverage on graphene/silicon and 60% on graphene/copper. On insulators, nanoparticles preferentially form on folds and edges. Energy dispersive X-ray analysis is used to confirm the nanoparticle elemental makeup.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Non-resonant electromechanical energy harvesting using inter-ferroelectric phase transitions

Non-resonant electromechanical energy harvesting is demonstrated under low frequency excitation (<50 Hz) using [110]{sub C}-poled lead indium niobate-lead magnesium niobate-lead titanate relaxor ferroelectric single crystals with compositions near the morphotropic phase boundary. The efficiency of power generation at the stress-induced phase transition between domain-engineered rhombohedral and orthorhombic ferroelectric states is as much as four times greater than is obtained in the linear piezoelectric regime under identical measurement conditions but during loading below the coercive stress of the phase change. The phase transition mode of electromechanical transduction holds potential for non-resonant energy harvesting from low-frequency vibrations and does not require mechanical frequency up-conversion.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nonlinear optics and crystalline whispering gallery mode resonators

We report on our recent results concerning fabrication of high-Q whispering gallery mode (WGM) crystalline resonators, and discuss some possible applications of lithium niobate WGM resonators in nonlinear optics and photonics. In particular, we demonstrate experimentally a tunable third-order optical filter fabricated from the three metalized resonators; and report observation of parametric frequency dobuling in a WGM resonator made of periodically poled lithium niobate (PPLN).

whispering gallery mode↗

Rare earth minerals in a "no tonstein" section of the Dean (Fire Clay) coal, Knox County, Kentucky

The Dean (Fire Clay) coal in Knox County, Kentucky, does not contain the megascopically-visible ash-fall tonstein present in most other sections of the coal bed. Like the Fire Clay tonstein, a low-ash portion of the coal is enriched in rare earth elements (>2400ppm, on ash basis). In addition to kaolinite produced in the diagenesis of volcanic glass, transmission electron microscopy studies indicate the coal contains primary kaolinite, La Ce Nd Th monazite, barium niobate, native gold, and Fe Ni Cr spinels. The mineral assemblages, particularly the kaolinite-monazite association and its similarity to the tonsteins in coal to the east, demonstrate the coal was subject to the REE-enriched volcanic ash fall, apparently just at a more dilute level than at locations where the tonstein is present.

coal, rare earth, tonstein↗

Exchange interactions and the state of iron atoms in Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ}

On the basis of the results of magnetic susceptibility and ESR studies of the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions iron atoms in the solid solutions of cubic modification of bismuth niobate were found to exist as Fe(III) monomers and exchange bound Fe(III)-O-Fe(III) dimers with antiferro- and ferromagnetic type of superexchange. The exchange parameters and the distribution of monomers and dimers in the solid solutions were calculated as a function of paramagnetic atom content. - Graphical abstract: The study of the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions showed that the introduction of iron atoms into the structure of Bi{sub 3}NbO{sub 7} stabilizes the cubic structure of bismuth niobate making the phase transition tetragonal ↔ cubic structure irreversible. In the Bi{sub 3}Nb{sub 1−x}Fe{sub x}O{sub 7−δ} solid solutions we observe the formation of dimers with antiferro- and ferromagnetic exchange. Such clusters are partially retained even at the infinite dilution of the solid solution, which testifies for their rigidity. A sufficiently high parameter of ferromagnetic exchange in a dimer (+53 cm{sup −1}) seems to result from iron atoms being located in the vicinity of oxygen vacancy. - Highlights: • The reversible transition cubic – tetragonal modifications in Bi{sub 3}NbO{sub 7} becomes irreversible. • Only cubic modification of Bi{sub 3}Nb{sub 1-x}Fe{sub x}O{sub 7-δ} is stable due to clusters of Fe atoms. • These clusters are sufficiently strong and retained even at the infinite dilution. • The calculations of magnetic susceptibility give the distribution of the clusters and single atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Non-reciprocal transmission of microwave acoustic waves in nonlinear parity–time symmetric resonators

Acoustic waves are versatile on-chip information carriers that can be used in applications such as microwave filters and transducers. Nonreciprocal devices, in which the transmission of waves is non-symmetric between two ports, are desirable for the manipulation and routing of phonons, but building acoustic non-reciprocal devices is difficult because acoustic systems typically have a linear response. Here, we report non-reciprocal transmission of microwave surface acoustic waves using a nonlinear parity–time symmetric system based on two coupled acoustic resonators in a lithium niobate platform. Furthermore, owing to the strong piezoelectricity of lithium niobate, we can tune the gain, loss and nonlinearity of the system using electric circuitry. Our approach can achieve 10 dB of non-reciprocal transmission for surface acoustic waves at a frequency of 200 MHz, and we use it to demonstrate a one-way circulation of acoustic waves in cascading non-reciprocal devices.

42 ENGINEERING↗

Long-range cooperative resonances in rare-earth ion arrays inside photonic resonators

Engineering arrays of active optical centers to control the interaction Hamiltonian between light and matter has been the subject of intense research recently. Collective interaction of atomic arrays with optical photons can give rise to directionally enhanced absorption or emission, which enables engineering of broadband and strong atom-photon interfaces. Here, we report on the observation of long-range cooperative resonances in an array of rare-earth ions controllably implanted into a solid-state lithium niobate micro-ring resonator. We show that cooperative effects can be observed in an ordered ion array extended far beyond the light’s wavelength. We observe enhanced emission from both cavity-induced Purcell enhancement and array-induced collective resonances at cryogenic temperatures. Engineering collective resonances as a paradigm for enhanced light-matter interactions can enable suppression of free-space spontaneous emission. The multi-functionality of lithium niobate hosting rare-earth ions can open possibilities of quantum photonic device engineering for scalable and multiplexed quantum networks.

42 ENGINEERING↗

Conductivity, structure, and thermodynamics of Y 2 Ti 2 O 7 –Y 3 NbO 7 solid solutions

The defect fluorite yttrium niobate Y 3 NbO 7 and pyrochlore yttrium titanate Y 2 Ti 2 O 7 solid solutions have been synthesized via a solid state synthesis route. The resulting stoichiometry of the oxides is Y 2+x Ti 2-2x Nb x O 7 , where x = 0 to x = 1. All of the samples were single-phase; however, for those with a predominant fluorite phase, a small amount of additional pyrochlore phase was detected. The volume of the solid solution unit cells linearly increases with increase in yttrium niobate content. The water uptake increases with (x) and the protonic defect concentration reaches almost 4.5 × 10 -3 mol mol -1 at 300 °C. The calculated enthalpy of formation from oxides suggests strong stability for all of the compositions, with the values of enthalpy ranging from -84.6 to -114.3 kJ mol -1 . The total conductivity does not have a visible dependence on Y 3 NbO 7 content. For each compound, the total conductivity is higher in wet air. Interestingly, for samples where x < 0.5, the ratio of conductivity in hydrogen to air increases with increasing temperature, while for x > 0.5, the trend is the opposite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mechanical Removal and Rescreening of Local Screening Charges on Ferroelectric Surfaces

We report the kinetics of screening charge removal and rescreening on periodically poled lithium niobate using charge-gradient microscopy and electrostatic force microscopy (EFM). A minimum pressure needs to be applied to initiate mechanical screening charge removal, and increasing the pressure leads to further removal of charge until a threshold is reached when all screening charges are removed. We fit all rescreening EFM contrast curves under various pressures into a universal exponential decay. The findings imply that we can control the screening degree of ferroelectric surfaces by mechanical means without affecting the polarization underneath.

charge gradient microscopy↗