Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multiple Scattering”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Bidirectional reflectance spectroscopy. I - Theory

An approximate analytic solution is derived for the radiative transfer equation describing particulate surface light scattering, taking into account multiple scattering and mutual shadowing. Analytical expressions for the following quantities are found: bidirectional reflectance, radiance coefficient and factor, the normal, Bond, hemispherical, and physical albedos, integral phase function and phase integral, and limb-darkening profile. Scattering functions for mixtures can be calculated, as well as corrections for comparisons of experimental transmission or reflection spectra with observational planetary spectra. The theory should be useful for the interpretation of reflectance spectroscopy of laboratory surfaces and the photometry of solar system objects.

Hapke, B.↗

Stochastic treatment of electron multiplication without scattering in dielectrics

By treating the emission of optical phonons as a Markov process, a simple analytic method is developed for calculating the electronic ionization rate per unit length for dielectrics. The effects of scattering from acoustic and optical phonons are neglected. The treatment obtains universal functions in recursive form, the theory depending on only two dimensionless energy ratios. A comparison of the present work with other numerical approaches indicates that the effect of scattering becomes important only when the electric potential energy drop in a mean free path for optical-phonon emission is less than about 25% of the ionization potential. A comparison with Monte Carlo results is also given for Teflon.

Lin, D. L.↗

Scattering Models in the Microwave Regime

Scattering from an inhomogeneous layer with irregular boundaries was calculated to model natural terrain such as a layer of vegetation or sea ice. The inhomogeneities were modeled by spherical or disc-shaped discrete scatterers which were small compared with the incident wavelength and were in the far field of one another. It was found that the cross-polarized scattering was dominated by multiple scattering effects and was sensitive to the orientations and distributions of the scatterers. This model has been applied to interpret measurements from vegetation, snow and sea ice. The scattering model was extended to handle disc-shaped scatterers which are comparable to the incident wavelength. The model was used to investigate the relative merits between active versus passive sensing of soil moisture over vegetated terrain. Results indicate that scattering mesurements are more sensitive to soil moisture changes than emission measurements. This is because while both types of measurements lose sensitivity to soil moisture because of the vegetation layer, the loss is greater for passive than active measurements.

Fung, A. K.↗

Discrete Random Media Techniques for Microwave Modeling of Vegetated Terrain

Microwave modeling of vegetated terrain was investigated. The purpose was to: (1) use discrete scatter theory to model vegetation (crops and forested regions) in microwave region; (2) develop models for scatterers and ground; (3) multiple scattering analysis relate model parameters to average scattered power; and (4) develop inversion techniques to remotely determine model parameters.

Lang, R. H.↗

An empirical model for polarized and cross-polarized scattering from a vegetation layer

An empirical model for scattering from a vegetation layer above an irregular ground surface is developed in terms of the first-order solution for like-polarized scattering and the second-order solution for cross-polarized scattering. The effects of multiple scattering within the layer and at the surface-volume boundary are compensated by using a correction factor based on the matrix doubling method. The major feature of this model is that all parameters in the model are physical parameters of the vegetation medium. There are no regression parameters. Comparisons of this empirical model with theoretical matrix-doubling method and radar measurements indicate good agreements in polarization, angular trends, and k sub a up to 4, where k is the wave number and a is the disk radius. The computational time is shortened by a factor of 8, relative to the theoretical model calculation.

Liu, H. L.↗

Polarization from scattering in blobs

We describe a Monte Carlo method for calculating polarization due to scattering in various geometries. We apply the method in this paper to the case of scattering in a spherical cloud illuminated by parallel rays. The polarization is largest in small optical depth blobs, where single scattering dominates. The polarization decreases as optical depth increases until a limit is reached where scattering occurs on the surface, and increasing optical depth has little effect on the results. For a given optical depth, decreasing the albedo leads to an increase of the degree of polarization of the scattered light because single scattering increases relative to multiple scattering. As the optical depth of the blob increases, the scattered flux becomes increasingly backward throwing. In the high albedo blobs, the maximum polarization becomes skewed towards the illuminated hemisphere at high optical depths. We discuss the applications to polarization in supergiants and R CrB stars, and scattering in a clumpy interstellar medium.

Code, Arthur D.↗

Nuclear Reaction Data Evaluations for Nuclear Applications Physics and modeling [Slides]

This presentation provides an evaluation workflow scheme for the project. It also discusses nuclear data libraries, including an overview of worldwide nuclear data libraries and current funding agencies. The presentation also discusses the theoretical framework commonly used in the evaluated work, including the R-matrix theory (≈ up to a few keVs for heavy nuclei) as well as pre-equilibrium (PE) and Hauser-Feshbach (HF) theory (⪆1 MeV for medium/heavy nuclei). Inclusion of experimental effects are also discussed. Examples of evaluated work, including theory, experiments, and applications are discussed, specifically n+ 28,29,30 Si evaluation (direct capture component), n+ 53 Cr evaluation (strong multiple scattering effects), n+ 239 Pu(n,γf) reaction (fluctuations in neutron multiplicities), and α+ 17,18 O evaluations (emerging neutron spectra).

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Multiple vs single scattering - Assessment of magnitudes

All orders of scattering are analyzed for two artifical canopies. The SHL canopy consists of Small Horizontal Leaves that are much smaller than the leaf-to-leaf spacing. The IHL canopy consists of Infinite Horizontal Layers, where each leaf is of infinite extent (a horizontal plane). Hemispheric leaf reflectances and transmittances independent of the direction of illumination lead to exact solutions for these models. Sunlight that penetrates to a given leaf area index level is much stronger in an SHL canopy than that in IHL; but the difference becomes muted when leaf transmittance is large. Multiple scattering enhances the hemispheric canopy reflectance more strongly in SHL than it does in IHL. The enhancement depends linearly on leaf transmittance in SHL and on the transmittance squared in IHL. Comparison with measured reflectances indicates that IHL model grossly underestimates multiple scattering in soybean canopies.

Otterman, Joseph↗

A Novel Approach to Solve Forward/Inverse Problems in Remote Sensing Applications

Inversion of electromagnetic (EM) signals reflected from or transmitted through a medium, or emitted by it due to internal sources can be used to investigate the optical and physical properties of a variety of scattering/absorbing/emitting materials. Such media encompass planetary atmospheres and surfaces (including water/snow/ice), and plant canopies. In many situations the signals emerging from such media can be described by a linear transport equation which in the case of EM radiation is the radiative transfer equation (RTE). Solutions of the RTE can be used as a forward model to solve the inverse problem to determine the medium state parameters giving rise to the emergent (reflected/transmitted/emitted) EM signals. A novel method is developed to determine layer-by-layer contributions to the emergent signals from such stratified, multilayered media based on the solution of the pertinent RTE. As a specific example of how this approach may be applied, the radiation reflected from a multilayered atmosphere is used to solve the problem relevant for EM probing by a space-based lidar system. The solutions agree with those obtained using the standard lidar approach for situations in which single scattering prevails, but this novel approach also yields reliable results for optically thick, multiple scattering aerosol and cloud layers that cannot be provided by the traditional lidar approach.

forward modeling↗

Studies of optical and chemical properties of aged and fresh biomass burning absorbing aerosols for climate models

Particulate emissions from burning fuels from sub-Saharan Africa is currently poorly characterized. With increasing population and industrialization, emissions are expected to grow. Optical methods for measuring light absorption in the ultraviolet (UV) and visible (vis) regions of the spectrum are crucial for understanding the optical properties of BB aerosols (Bond and Bergstrom, 2006; Lack and Cappa, 2010; Moschos et al., 2021). One such instrument is the dual-spot AE33 model aethalometer is a common filter-based instrument that can be used to measure aerosol absorption properties (Hansen et al., 1984). This instrument has many figures of merit; however, the method's limitations include potential biases from scattering within the filter material, multiple scattering effects of the particles, filter loading (i.e. particle shadowing), and the need for wavelength-specific correction factors (Cλ), which depend on accurate intercomparison with other in situ techniques (Bond et al., 1999; Collaud Coen et al., 2010). This work aims to: 1. Optically characterize BB aerosol generated from African fuel 2. Correct the aethalometer at multiple wavelengths 3. Parametrize these correction factors. 4. Combusting the same fuels with two difference tube furnace systems assess the general applicability of this flexible means of producing BB aerosol. This was accomplished by conducting laboratory studies at Los Alamos National Laboratory (LANL) and North Carolina A&T State University (NCA&T), where aethalometer measurements were compared to in situ optical measurements. Mass cross sections of BB aerosol from these under-studied fuels will be determined along with their wavelength dependence.

09 BIOMASS FUELS↗

Light scattering in cometary dust comae

Single and multiple scattering calculations were performed for a spherically symmetric cometary atmosphere irradiated by a plane parallel source. It is suggested that the increased flux found for anisotropic phase functions is due to the effect of directional scattering in the forward sun-comet axis. The isotropic multiply scattered flux at the surface is shown to be an increasing function of the opacity (tau) for tau of less than about 2.5. At large tau values, the maximum in the downward directed scattered flux still increases, but occurs at a height of several radii above the nucleus, resulting in a reduction at the surface. Results suggest that, except in the vicinity of the sun-comet axis, the plane parallel geometry tends to underestimate the degree of scattering.

Herman, Gary↗

Use of the Wigner representation in scattering problems

The basic equations of quantum scattering were translated into the Wigner representation, putting quantum mechanics in the form of a stochastic process in phase space, with real valued probability distributions and source functions. The interpretative picture associated with this representation is developed and stressed and results used in applications published elsewhere are derived. The form of the integral equation for scattering as well as its multiple scattering expansion in this representation are derived. Quantum corrections to classical propagators are briefly discussed. The basic approximation used in the Monte-Carlo method is derived in a fashion which allows for future refinement and which includes bound state production. Finally, as a simple illustration of some of the formalism, scattering is treated by a bound two body problem. Simple expressions for single and double scattering contributions to total and differential cross-sections as well as for all necessary shadow corrections are obtained.

Bemler, E. A.↗

Assessment of the biophysical characteristics of rangeland community using scatterometer and optical measurements

Research activities for the following study areas are summarized: single scattering of parallel direct and axially symmetric diffuse solar radiation in vegetative canopies; the use of successive orders of scattering approximations (SOSA) for treating multiple scattering in a plant canopy; reflectance of a soybean canopy using the SOSA method; and C-band scatterometer measurements of the Konza tallgrass prairie.

Kanemasu, E. T.↗

The extraordinary radar echoes from Europa, Ganymede, and Callisto - A geological perspective

Electromagnetic echo-scattering models, empirical and theoretical considerations on regolith formation, and ice physics, are presently invoked in a geologic treatment of the anomalous radar properties of the icy Galilean satellites. These are held to arise because of the electrical differences between ice and silicates, and the absence of icy regoliths' ice-density structures in silicate regoliths. Icy regoliths may uniquely smooth out discontinuities between solid ejecta fragments and more porous surroundings, forming refraction-scattering 'lenses'; high-order multiple scatterings will thereby become more likely responsible for the echoes than low-order scattering.

Ostro, Steven J.↗

Performance of traffic-alert collision avoidance (TCAS) antennas in the presence of scatterers

The performance of two TCAS systems is studied in the presence of electromagnetic scatterers. TCAS is an aircraft mounted angle of arrival (AOA) system, which estimates the bearing of a signal transmitted from a mode-S transponder on another nearby aircraft (intruder). Two systems are studied: (1) Comparison of Relative Amplitude system (CRA), and (2) Spiral Phase Antenna (SPA). The CRA antenna receives the reply via four switched beams. The bearing is estimated by comparing the amplitudes of the received signal. The SPA is based on the phase interferometer, which utilizes the received phase via sum and difference beams. The AOA is computed by comparing the reply with similar values on a calibration table, which is generated by modeling the TCAS antenna on the bare fuselage of a Boeing 727-200. The antenna patterns for the TCAS are found via high frequency methods based on the Uniform Geometric theory of Diffraction (UTD). By minimizing the standard deviation of the bearing error in a specified angular sector, optimal locations for top and bottom mounted TCAS antennas are found on the Boeing 727-200, 737-300 and 747-200 airframes. It will be shown that the overall bearing errors of the amplitude system are consistently smaller than the spiral phase TCAS. The effect of two types of nearby scatterers--antennas, and engine inlets--is studied. The AT741 L-band blade, DMC60-1 VHF Communication antenna were chosen as being representative antenna interference examples. Models are derived for the blades via a moment method analysis followed by a least squares procedure to synthesize the scattering patterns. Studies were conducted to estimate the minimum separation between the two antennas for acceptable operation. It will be shown that the spiral phase TCAS is adversely affected by the presence of a blade antenna. The amplitude system does not suffer from this limitation, especially for the forward look angles which are of most interest here. A model to represent the inlet scattering is based on the multiple scattering method and UTD. The engine on top of the B727-200 fuselage is modeled by a terminated circular waveguide. Then, the effect of moving the antenna forward on the fuselage is studied. It is again shown that the performance of the amplitude system is superior.

Sampath, K. S.↗

Spectral decomposition of AVIRIS data

A set of techniques is presented that uses only information contained within a raw Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) scene to estimate and to remove additive components such as multiple scattering and instrument dark current. Multiplicative components (instrument gain, topographic modulation of brightness, atmospheric transmission) can then be normalized, permitting enhancement, extraction, and identification of relative reflectance information related to surface composition and mineralogy. The technique for derivation of additive-component spectra from a raw AVIRIS scene is an adaption of the 'regression intersection method' of Crippen. This method uses two surface units that are spatially extensive, and located in rugged terrain. For a given wavelength pair, subtraction of the derived additive component from individual band values will remove topography in both regions in a band/band ratio image. Normalization of all spectra in the scene to the average scene spectrum then results in cancellation of multiplicative components and production of a relative-reflectance scene. The resulting AVIRIS product contains relative-reflectance features due to mineral absorption that depart from the average spectrum. These features commonly are extremely weak and difficult to recognize, but they can be enhanced by using two simple 3-D image-processing tools. The validity of these techniques will be demonstrated by comparisons between relative-reflectance AVIRIS spectra and those derived by using JPL standard calibrations. The AVIRIS data used in this analysis were acquired over the Kelso Dunes area (34 deg 55' N, 115 deg 43' W) of the eastern Mojave Desert, CA (in 1987) and the Upheaval Dome area (38 deg 27' N, 109 deg 55' W) of the Canyonlands National Park, UT (in 1991).

Gaddis, Lisa↗

Aspects of Boreal Forest Hydrology: From Stand to Watershed

This report evaluates land surface hydrologic processes in the boreal forest using observations collected during the Boreal Ecosystem Atmospheric Study (BOREAS), carried out in the boreal forest of central Canada from 1994 to 1996. Three separate studies, each of which constitutes a journal publication, are included. The first study describes the application of a spatially-distributed hydrologic model, originally developed for mid-latitude forested environments, to selected BOREAS flux measurement sites. Compared to point observations at the flux towers, the model represented energy and moisture fluxes reasonably well, but shortcomings were identified in the soil thermal submodel and the partitioning of evapotranspiration into canopy and subcanopy components. As a first step towards improving this partitioning, the second study develops a new parameterization for transmission of shortwave radiation through boreal forest canopies. The new model accounts for the transmission of diffuse and direct shortwave radiation and accounts for multiple scattering in the canopy and multiple reflections between the canopy layers.

Nijssen, B.↗