Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multimission”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Modular thrust subsystem approaches to solar electric propulsion module design

Three approaches are presented for packaging the elements of a 30 cm ion thruster subsystem into a modular thrust subsystem. The individual modules, when integrated into a conceptual solar electric propulsion module are applicable to a multimission set of interplanetary flights with the space shuttle interim upper stage as the launch vehicle. The emphasis is on the structural and thermal integration of the components into the modular thrust subsystems. Thermal control for the power processing units is either by direct radiation through louvers in combination with heat pipes or an all heat pipe system. The propellant storage and feed system and thruster gimbal system concepts are presented. The three approaches are compared on the basis of mass, cost, testing, interfaces, simplicity, reliability, and maintainability.

Cake, J. E.↗
NASA NTRS1976

LANDSAT/MMS propulsion module design. Volume 1: Task 4.3, trade studies

Evaluations are presented of alternative LANDSAT follow-on launch configurations to derive the propulsion requirements for the multimission modular spacecraft (MMS). Two basic types were analyzed including use of conventional launch vehicles and shuttle-supported missions. It was concluded that two sizes of modular hydrazine propulsion modules would provide the most cost-effective combination for future missions of this spacecraft. Conceptual designs of the selected propulsion modules were performed to the depth permitting determination of mass properties and estimated costs.

Mansfield, J. M.↗
NASA NTRS1976

LANDSAT/MMS propulsion module design. Tas4.4: Concept design

Evaluations are presented of alternative LANDSAT follow-on launch configurations to derive the propulsion requirements for the multimission modular spacecraft (MMS). Two basic types were analyzed including use of conventional launch vehicles and shuttle supported missions. It was concluded that two sizes of modular hydrazine propulsion modules would provide the most cost-effective combination for future missions of this spacecraft. Conceptual designs of the selected propulsion modules were performed to the depth permitting determination of mass properties and estimated costs.

Mansfield, J. M.↗
NASA NTRS1977

Follow-On Studies for Design Definition of a Lift/Cruise Fan Technology V/STOL Airplane, Volume 1

A three engine, three fan V/STOL airplane was designed for use as a Research Technology Airplane in proof-of-concept of a candidate configuration for use as a Navy multimission airplane. Use of mechanically interconnected variable pitch fans is made to accommodate power transfer for flight control in hover and to provide flight capability in the event of a single engine failure. The airplane is a modification of a T-39A transport. Design definition is provided for high risk propulsion components and a development test program is defined.

Source record↗
NASA NTRS1977

Mass study for modular approaches to a solar electric propulsion module

The propulsion module comprises six to eight 30-cm thruster and power processing units, a mercury propellant storage and distribution system, a solar array ranging in power from 18 to 25 kW, and the thermal and structure systems required to support the thrust and power subsystems. Launch and on-orbit configurations are presented for both modular approaches. The propulsion module satisfies the thermal design requirements of a multimission set including: Mercury, Saturn, and Jupiter orbiters, a 1-AU solar observatory, and comet and asteroid rendezvous. A detailed mass breakdown and a mass equation relating the total mass to the number of thrusters and solar array power requirement is given for both approaches.

Sharp, G. R.↗
NASA NTRS1977

NASA/Navy lift/cruise fan cost reduction studies

Cost reduction studies were performed for the LCF459 turbotip fan for application with the YJ97-GE-100 gas generator in a multimission V/STOL research and technology aircraft. A 20 percent cost reduction of the research configuration based on the original preliminary design was achieved. The trade studies performed and the results in the area of cost reduction and weight are covered. A fan configuration is defined for continuation of the program through the detailed design phase.

Source record↗
NASA NTRS1977

STS ancillary equipment study

Spaceborne and ground ancillary equipment for multimission module spacecraft are listed to provide documentation for potential users interested in utilizing existing equipment rather than developing payload unique designs. The format of the data form contained in the Ancillary Equipment user reference book is discussed.

Plough, J. A.↗
NASA NTRS1977

DSN tracking system: Mark III-77

The Deep Space Network tracking system is described. Revisions of subsystem Mark III-75 are briefly outlined, and the currently used multimission support subsystem Mark III-77 is described. Tracking functions performed are given as well.

Chaney, W. D.↗
NASA NTRS1977

DSN radio science system Mark III-78 real-time display capability

The current plane to provide radio science real-time display capability in response to multimission radio science requirements is described. Topics discussed include the display of Doppler frequency and high-resolution graphical display of all closed-loop radio metric parameters, and spectrum displays of open-loop receiver output.

Berman, A. L.↗
NASA NTRS1976

Modular thrust subsystem approaches to solar electric propulsion module design

Three approaches are presented for packaging the elements of a 30 cm ion thrustor subsystem into a modular thrust subsystem. The individual modules, when integrated into a conceptual solar electric propulsion module are applicable to a multimission set of interplanetary flights with the Space Shuttle/Interim Upper Stage as the launch vehicle. The emphasis is on the structural and thermal integration of the components into the modular thrust subsystems. Thermal control for the power processing units is either by direct radiation through louvers in combination with heat pipes of an all heat pipe system. The propellant storage and feed system and thrustor gimbal system concepts are presented. The three approaches are compared on the basis of mass, cost, testing, interfaces, simplicity, reliability, and maintainability.

Cake, J. E.↗
NASA NTRS1977

Radiative metallic thermal protection systems - A status report

During the early stages of the space shuttle program there were a number of technological uncertainties concerning the applicability of metallic thermal protection systems (TPS) to the multimission environment of the shuttle. To resolve the uncertainties and to advance the state-of-the-art, the NASA-Langley Research Center initiated a broad-based technology program to develop metallic TPS over the temperature range from 810 K to 1590 K. Wind tunnel tests conducted to assess the influence of surface/stream interaction of wavy surfaces on the design of metallic TPS indicate small increases in heat flux and surface drag for flow angles less than 20 deg. Analytical and experimental investigations, recently completed, have significantly improved prediction methods for cyclic creep behavior of TPS components repeatedly exposed to complex mission cycles. Thermal/structural concept optimization studies to minimize mass while maintaining structural integrity have led to advanced designs with unit masses which are competitive with those for shuttle RSI. In addition, the durability and reusability of metallic TPS have been repeatedly demonstrated in tests of full-scale systems. The current state-of-the-art strongly suggests that radiative metallic TPS have come of age.

Bohon, H. L.↗
NASA NTRS1977

NASA's standard spacecraft for free flying shuttle payloads

The paper gives a detailed description of the Multimission Modular Spacecraft. Attention is given to the structural system, the electrical system, the thermal control system, the power system, attitude control, the propulsion module, and mission considerations.

Bartlett, R. O.↗
NASA NTRS1977

Ion engine auxiliary propulsion applications and integration study

The benefits derived from application of the 8-cm mercury electron bombardment ion thruster were assessed. Two specific spacecraft missions were studied. A thruster was tested to provide additional needed information on its efflux characteristics and interactive effects. A Users Manual was then prepared describing how to integrate the thruster for auxiliary propulsion on geosynchronous satellites. By incorporating ion engines on an advanced communications mission, the weight available for added payload increases by about 82 kg (181 lb) for a 100 kg (2200 lb) satellite which otherwise uses electrothermal hydrazine. Ion engines can be integrated into a high performance propulsion module that is compatible with the multimission modular spacecraft and can be used for both geosynchronous and low earth orbit applications. The low disturbance torques introduced by the ion engines permit accurate spacecraft pointing with the payload in operation during thrusting periods. The feasibility of using the thruster's neutralizer assembly for neutralization of differentially charged spacecraft surfaces at geosynchronous altitude was demonstrated during the testing program.

S. Zafran↗
NASA NTRS1976

Severe storms observing satellite (STORMSAT)

The primary payload for this satellite is the Advanced Atmospheric Sounding and Imaging Radiometer which will perform precise infrared temperature sounding and visible/infrared imaging from geostationary orbit. A secondary payload instrument which may be utilized on STORMSAT is the Microwave Atmospheric Sounding Radiometer which provides an independent set of temperature and humidity sounding in cloudy, meteorologically active regions. The study provides satellite designs and identifies mission-unique subsystems using the Multimission Modular Spacecraft using a Shuttle/Interim Upper Stage launch vehicle.

Source record↗
NASA NTRS1977

Toward a new V/STOL generation

While many V/STOL problems are now better understood and technology has progressed to the point where higher thrust/weight ratios and greater stability augmentation are achievable, a number of still existing insufficiencies provide a sobering reminder that learning in ground testing and simulation, and careful methodical planning, are a prerequisite for any research and development program. The present paper is centered on the major technical problems for the Navy Type multimission V/STOL aircraft. The aircraft's configurations with and without forward lift fan are discussed, along with the propulsion systems, testing techniques, controls, displays, flight dynamics, and ground/flow field interactions.

Roberts, L.↗
NASA NTRS1978

Overview of the large space systems technology program

A multicenter management approach which provides the opportunity to work across many disciplines and match the roles and expertise of various NASA facilities is described for the large space system technology (LSST) program which was established to define, develop, and verify structural concepts, analyses, and design procedures for a range of sizes and configurations to be deployed, erected, or fabricated in orbit during projected space missions utilizing shuttle in the 1985 to 2000 time period. Benefits from the program include reduced costs for transporting structures having low mass, high packageability, and multimission capabilities. Technologies identified by the LSST program will contribute to the solutions of problems in other sectors of the economy.

Guastaferro, A.↗
NASA NTRS1978

Ion propulsion cost effectivity

Ion propulsion modules employing 8-cm thrusters and 30-cm thrusters were studied for Multimission Modular Spacecraft (MMS) applications. Recurring and nonrecurring cost elements were generated for these modules. As a result, ion propulsion cost drivers were identified to be Shuttle charges, solar array, power processing, and thruster costs. Cost effective design approaches included short length module configurations, array power sharing, operation at reduced thruster input power, simplified power processing units, and power processor output switching. The MMS mission model employed indicated that nonrecurring costs have to be shared with other programs unless the mission model grows. Extended performance missions exhibited the greatest benefits when compared with monopropellant hydrazine propulsion.

Zafran, S.↗
NASA NTRS1978

Reflections on the NASA standardization effort

The NASA standardization effort which has been in existence for four years is described. A significant number of equipments have been declared standard in order to achieve multimission utilization with the consequent avoidance of high nonrecurring development costs. The small numbers of equipments and significant gaps in time before the next user requires the item raise questions of the value of maintaining a standard, how to assure its producibility economically in the future, and how to prevent its technical obsolescence. Increasing pressures to broaden the participation of industry in the space program have also contributed to a reexamination of the philosophy of standardization.

Sonnemann, H.↗