Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Multilayer”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Toward Mass-Production of Transition Metal Dichalcogenide Solar Cells: Scalable Growth of Photovoltaic-Grade Multilayer WSe2 by Tungsten Selenization

Semiconducting transition metal dichalcogenides (TMDs) are promising for high-specific-power photovoltaics due to their desirable band gaps, high absorption coefficients, and ideally dangling-bond-free surfaces. Despite their potential, the majority of TMD solar cells to date are fabricated in a nonscalable fashion, with exfoliated materials, due to the lack of high-quality, large-area, multilayer TMDs. Here, we present the scalable, thickness-tunable synthesis of multilayer WSe2 films by selenizing prepatterned tungsten with either solid-source selenium at 900 degrees C or H2Se precursors at 650 degrees C. Both methods yield photovoltaic-grade, wafer-scale WSe2 films with a layered van der Waals structure and superior characteristics, including charge carrier lifetimes up to 144 ns, over 14x higher than those of any other large-area TMD films previously demonstrated. Simulations show that such carrier lifetimes correspond to ~22% power conversion efficiency and ~64 W g-1 specific power in a packaged solar cell, or ~3 W g-1 in a fully packaged solar module. The results of this study could facilitate the mass production of high-efficiency multilayer WSe2 solar cells at low cost.

carrier lifetime↗

Functional Multilayered Transparent Conducting Oxide Thin Films for Photovoltaic Devices

In this study, we present a thermally stable multilayered transparent conducting oxide (TCO) functionalized for dye-sensitized solar cells (DSSCs). Nb-doped TiO{sub 2} (NTO) layers deposited on conventional Sn-doped In{sub 2}O{sub 3} (ITO) substrates using pulsed laser deposition (PLD) enhanced the optical-to-electrical conversion efficiency of the DSSCs by as much as 17% compared to that of bare ITO-based DSSCs. The electrical properties and J-V characteristics of the multilayered NTO/ITO films showed that the improved cell performance was due to the facilitated charge injection from TiO{sub 2} to ITO that resulted from the formation of an ohmic contact with ITO, as well as the conserved high conductivity of ITO after the oxidizing annealing process. Moreover, the NTO/ITO-based DSSC exhibited higher efficiency than a F-doped SnO{sub 2}(FTO)-based one, which demonstrates that optimization of multilayered NTO-based TCOs is a realistic approach for achieving highly efficient photoenergy conversion devices.

14 SOLAR ENERGY↗

Leakage From Coexisting Geologic Forcing and Injection‐Induced Pressurization: A Semi‐Analytical Solution for Multilayered Aquifers With Multiple Wells

Abstract Abnormal fluid pressures (above or below hydrostatic pressure) can develop and persist in sedimentary basins. The common occurrence of abnormal pressures may cause challenges for project permitting of geological carbon sequestration (GCS), particularly in reservoirs with pre‐injection overpressure. The leaky wells that may exist in some sedimentary basins can provide flow paths between deep brine aquifers and shallower freshwater aquifers. Pre‐injection relative overpressures can cause brine leakage through leaky wells even before any injection occurs. The tendency for flow through leaky wells is coupled with the process of pressure dissipation that occurs through aquitards. Specifically, with non‐zero permeability, aquitards can dissipate pressure over large areal extents and thereby reduce leakage rates through leaky wells. This study presents development of a semi‐analytical solution for hydraulic head and brine leakage in multilayered aquifer–aquitard systems with geologic pressure forcing. The geologic forcing that causes abnormal pressures in the multilayered system can coexist with any number of injection, extraction, and leaky wells that also affect fluid pressure. The semi‐analytical model is applied to explore how leakage through leaky wells varies as functions of pressurization rate, along with aquitard and leaky well properties in an overpressured multilayered system. The results show that although injection‐induced pressures can dissipate rapidly through suitably permeable aquitards, coexisting geologic forcing may create sustained rates of brine leakage into freshwater aquifers through leaky wells. In GCS, a very low‐permeability aquitard with high capillary entry pressure to free‐phase CO 2 is desired to serve as the caprock to prevent leakage of CO 2 from the storage reservoir. Nevertheless, the results from this study show that the brine leakage impact to shallow freshwater aquifers through leaky wells might substantially decrease with increasing aquitard permeability values, as long as small aquitard permeability and high capillary entry pressure serve to prevent CO 2 leakage.

Cihan, A.↗

Observation of stable Néel skyrmions in cobalt/palladium multilayers with Lorentz transmission electron microscopy

Néel skyrmions are of high interest due to their potential applications in a variety of spintronic devices, currently accessible in ultrathin heavy metal/ferromagnetic bilayers and multilayers with a strong Dzyaloshinskii–Moriya interaction. Here in this paper we report on the direct imaging of chiral spin structures including skyrmions in an exchange-coupled cobalt/palladium multilayer at room temperature with Lorentz transmission electron microscopy, a high-resolution technique previously suggested to exhibit no Néel skyrmion contrast. Phase retrieval methods allow us to map the internal spin structure of the skyrmion core, identifying a 25 nm central region of uniform magnetization followed by a larger region characterized by rotation from in- to out-of-plane. The formation and resolution of the internal spin structure of room temperature skyrmions without a stabilizing out-of-plane field in thick magnetic multilayers opens up a new set of tools and materials to study the physics and device applications associated with chiral ordering and skyrmions.

36 MATERIALS SCIENCE↗

Ultrahigh photo-responsivity and detectivity in multilayer InSe nanosheets phototransistors with broadband response

In this paper, we demonstrate the strategies and principles for the performance improvement of layered semiconductor based photodetectors using multilayer indium selenide (InSe) as the model material. It is discovered that multiple reflection interference at the interfaces in the phototransistor device leads to a thickness-dependent photo-response, which provides a guideline to improve the performance of layered semiconductor based phototransistors. The responsivity and detectivity of InSe nanosheet phototransistor can be adjustable using applied gate voltage. Our InSe nanosheet phototransistor exhibits ultrahigh responsivity and detectivity. An ultrahigh external photo-responsivity of ~10 4 A W -1 can be achieved from broad spectra ranging from UV to near infrared wavelength using our InSe nanosheet photodetectors. The detectivity of multilayer InSe devices is ~10 12 to 10 13 Jones, which surpasses that of the currently exploited InGaAs photodetectors (10 11 to 10 12 Jones). Finally, this research shows that multilayer InSe nanosheets are promising materials for high performance photodetectors.

36 MATERIALS SCIENCE↗

Atomistic simulation of PDADMAC/PSS oligoelectrolyte multilayers: overall comparison of tri- and tetra-layer systems

By employing large-scale molecular dynamics simulations of atomistically resolved oligoelectrolytes in aqueous solutions, we study in detail the first four layer-by-layer deposition cycles of an oligoelectrolyte multilayer made of poly(diallyl dimethyl ammonium chloride)/poly(styrene sulfonate sodium salt) (PDADMAC/PSS). The multilayers are grown on a silica substrate in 0.1 M NaCl electrolyte solutions and the swollen structures are then subsequently exposed to varying added salt concentration. We investigated the microscopic properties of the films, analyzing in detail the differences between three- and four-layer systems. Our simulations provide insights into the early stages of growth of a multilayer, which are particularly challenging for experimental observations. Here, we found rather strong complexation of the oligoelectrolytes, with fuzzy layering of the film structure. The main charge compensation mechanism is for all cases intrinsic, whereas extrinsic compensation is relatively enhanced for the layer of the last deposition cycle. In addition, we quantified other fundamental observables of these systems, such as the film thickness, water uptake, and overcharge fractions for each deposition layer.

74 ATOMIC AND MOLECULAR PHYSICS↗

Reducing dielectric loss and enhancing electrical insulation for multilayer polymer films by nanoconfined ion transport under high poling electric fields

High temperature polar polymers have demonstrated potential for good thermal stability and high dielectric constant at the same time. However, polarization of contaminated impurity ions in polar polymers, even at the ppm level, can significantly increase the dielectric loss at high temperature and low frequencies. One effective strategy to mitigate this problem is to multilayer them with a high temperature nonpolar dielectric polymer to confine impurity ion transport at the nanometer scale. In this study, confined ion transport in high temperature polycarbonate (HTPC)/poly(vinylidene fluoride) (PVDF) multilayer films under high AC electric fields was studied using a direct analytical simulation method. Different from the ion transport under low fields, the ion diffusion model failed to describe the ion transport under high electric fields. An exponential ion distribution profile, which was observed for the DC poling situation, was employed to implement the direct analytical simulation. Confined impurity ion transport under high AC fields was quantitatively understood. As the AC field increased, the mobile ion concentration decreased whereas the diffusion coefficient increased. The decrease of mobile ion concentration was explained by the blockage of impurity ions by the HTPC layers. This knowledge helped in the determination of optimal conditions to polarize impurity ions from the PVDF layers into the HTPC layers. After cooling below the glass transition temperature of HTPC, polarized impurity ions were locked inside the HTPC layers. As a result, increased discharge efficiency and enhanced electrical insulation (i.e., increased dielectric breakdown strength) were achieved for the polarized multilayer films.

36 MATERIALS SCIENCE↗

Residual Stress and Opening-Mode Fracture Analysis of Multilayered Structures Subjected to Thermal Loading

Temperature change after formation commonly results in thermal residual stress in multilayered structures due to the different thermal and mechanical properties of each layer. In this paper, a three-dimensional (3D) elastic model is developed to study the residual stress and opening-mode fractures (OMFs) in a multilayered structure consisting of arbitrary number of layers under temperature change. The general solution of displacement field in the multilayered structure is derived by solving the elastic boundary value problem. In order to verify the proposed model, the elastic field in the advanced polymeric solar reflectors that consist of four layers is solved by applying the present model and compared with the finite-element (FE) simulation. In addition, parametric studies are conducted to investigate the effect of the thickness ratio between each layer on the accuracy of the developed model. As a result, based on the obtained elastic field, the fracture energy release rate (ERR) in the surface layer of the advanced polymeric reflector is obtained and used to study the fracture initiation, infilling, and saturation successfully.

36 MATERIALS SCIENCE↗

Thermal conductivity of (Zr,W)N/ScN metal/semiconductor multilayers and superlattices

The cross-plane thermal conductivities of metal/semiconductor multilayers and epitaxial superlattices have been measured as a function of period by time-domain thermoreflectance at room temperature. (001)-oriented ZrN (metal)/ScN (semiconductor) multilayers and (Zr,W)N/ScN epitaxial superlattices with the rocksalt crystal structure were grown on (001)MgO substrates by reactive magnetron sputtering. A distinct minimum in thermal conductivity at a period of {approx}6 nm is observed for ZrN/ScN multilayers. The minimum thermal conductivity of 5.25 W/m K is a factor of {approx}2.7 smaller than the mean of the thermal conductivities (including only the lattice contributions) of the values measured for films of the constituent materials, and approximately equal to the lattice component of the thermal conductivity of a Zr{sub 0.65}Sc{sub 0.35}N alloy film ({approx}5 W/m K). Alloying the ZrN layers with WN{sub x} reduces the lattice mismatch, yielding epitaxial (Zr,W)N/ScN superlattices. The addition of WN{sub x} also reduces the thermal conductivity to {approx}2 W/m K, a value that is sufficiently low to suggest promise for these materials as solid-state thermionic generators.

36 MATERIALS SCIENCE↗

Co layer fragmentation effect on magnetoresistive and structural properties of nanogranular Co/Cu multilayers

We deposited nanogranular Co/Cu multilayers made of thin fragmented Co layers separated by thicker Cu layers to study how the structure and the microstructure of magnetic nanogranular samples change as the average particle size is reduced and how these changes affect the giant magnetoresistive response of the samples. Indeed, thanks to the vertical periodicity of the structure, namely, to the fact that Co/Cu interfaces display an ordered stacking and are not randomly distributed within the samples as in conventional granular materials, their self-correlation and cross correlation can be investigated. In this way, the characteristic length scale of the Co/Cu interfacial roughness that is strictly related to the giant magnetoresistive response of the samples and the universality class of the growth mechanism that affects the systems structure can be both accessed. The Co/Cu nanogranular multilayers were characterized using different x-ray techniques, from specular reflectivity, which allows to probe the multilayer development in the vertical direction, to grazing incidence small angle diffuse scattering, which provides information on the self-correlation and cross correlation of the Co/Cu interfaces. Furthermore, diffraction measurements indicate that the degree of structural disorder increases by decreasing the thickness of the Co layers. Magnetoresistive and magnetization measurements are as well presented and discussed with the results of the structural characterization.

36 MATERIALS SCIENCE↗

Effect of Ag thickness on electrical transport and optical properties of indium tin oxide-Ag-indium tin oxide multilayers

We report the dependence of electronic and optical properties on the Ag thickness in transparent conductive indium tin oxide (ITO)-Ag-ITO (IMI) multilayer films deposited on polyethylene naphthalate flexible substrate by sputtering at room temperature. The electrical properties (such as carrier concentration, mobility, and resistivity) changed significantly with incorporation of Ag between the ITO layers. Comparison of sheet resistance of the IMI multilayers and the calculated sheet resistance of the Ag midlayer indicates that most of the conduction is through the Ag film. The critical thickness of Ag to form a continuous conducting layer is found to be 8 nm using electrical and optical analysis. A conduction mechanism is proposed to elucidate the mobility variation with increased Ag thickness. Carrier transport is limited by either interface scattering or grain-boundary scattering depending on the thickness of the Ag midlayer. Interface scattering is dominant for thinner (5.5-7 nm) Ag and grain-boundary scattering is dominant for thicker (8-10.5 nm) Ag midlayers. In addition, the effect of varying Ag midlayer thickness on transmittance behavior is also discussed. A figure of merit is used to compare performance of the IMI multilayer systems as a function of Ag thickness.

36 MATERIALS SCIENCE↗

Temperature Dependent Thermal Conductivity of Si/SiC Amorphous Multilayer Films

The cross-plane thermal conductivity of 22 nm period Si/SiC amorphous multilayer films deposited by magnetron sputtering and measured using a differential 3{omega} method was found to decrease from 2.0 W/mK at 300 K to 1.1 W/mK at 80 K. Structural disorder in each of the constituent layers of the amorphous multilayer films was confirmed by high resolution transmission electron microscopy. Estimations of the relative contributions of interface and intrinsic layer thermal resistance based on microscopic phonon transport models indicate that mean free path reductions induced by the structural disorder within the multilayer films are responsible for the observed experimental trends.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

High Spectral Resolution With Multilayer Gratings

The improvement of spectral resolution brought about by the use of multilayer grating (MG) instead of multilayer mirror (MM) is analyzed. The spectrum of a complex sample containing various elements excited under electron irradiation is studied. This sample is a pellet made by pressing powders of Cu and compounds with Fe and F atoms. The MM is a Mo/B{sub 4}C periodic multilayer with a period of about 6 nm; for the MG a grating of 1 {mu}m period has been etched in the MM. It is shown that the MG can easily resolve the F Kalpha and Fe Lalpha emissions, separated by about 30 eV, whereas the MM is unable to give such a performance. A comparison with an EDS (SDD) detector is also given. It is also shown that the MG can improve the detection limit. Finally the role of the slit placed in front of the detector is discussed.

36 MATERIALS SCIENCE↗

Enhancement of perpendicular coercivity for CoPt top layer in CoPt/AlN multilayer structure

The magnetic behavior of sputter deposited AlN20 nm/[CoPt2 nm/AlN2 nm]{sub 5}/CoPt(x) (x as the thickness of the top CoPt layer) multilayer structure has been studied. It has been found that the magnetic anisotropy of the structure strongly depends on thermal annealing. With increasing the annealing temperature, the film changes from the in-plane magnetic anisotropy to the perpendicular anisotropy. Especially, for the top CoPt layer, the perpendicular coercivity increases much rapidly compared with that of the CoPt layers inside the base multilayer, when increasing the annealing temperature to 500 deg. C or above. The coercivity difference between the top CoPt layer and the base multilayer caused in this way results in an antiparallel alignment state during the magnetization process. The perpendicular magnetization and the coercivity enhancement for the CoPt top layer are correlated with the change in the residual stress inside this layer.

36 MATERIALS SCIENCE↗

Multilayered Al/CuO thermite formation by reactive magnetron sputtering: Nano versus micro

Multilayered Al/CuO thermite was deposited by a dc reactive magnetron sputtering method. Pure Al and Cu targets were used in argon-oxygen gas mixture plasma and with an oxygen partial pressure of 0.13 Pa. The process was designed to produce low stress (<50 MPa) multilayered nanoenergetic material, each layer being in the range of tens nanometer to one micron. The reaction temperature and heat of reaction were measured using differential scanning calorimetry and thermal analysis to compare nanostructured layered materials to microstructured materials. For the nanostructured multilayers, all the energy is released before the Al melting point. In the case of the microstructured samples at least 2/3 of the energy is released at higher temperatures, between 1036 and 1356 K.

36 MATERIALS SCIENCE↗

Magnetoresistance in nanostructured Tb/Ti and Tb/Si multilayers

Magnetic, magnetoresistive and structural properties were studied for [Tb/Ti]{sub n} and [Tb/Si]{sub n} multilayers which were prepared by rf-sputtering. The thickness of the Tb layers varied from 1.5 to 12 nm. The thickness of 2 nm nonmagnetic spacers of Ti or Si was kept constant. Both anisotropic and isotropic magnetoresistance was observed in [Tb/Ti]{sub n} and [Tb/Si]{sub n} multilayers. A decrease in the thickness of the terbium layers led to a decrease in the anisotropic contribution to the total magnetoresistance. The negative isotropic magnetoresistanse in [Tb/Ti]{sub n} and [Tb/Si]{sub n} multilayers can be attributed to the giant magnetoresistance (GMR) and/or high field isotropic magnetoresistance. The structure of the samples of both types enabled the existence of the GMR effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Deposition temperature induced magnetic anisotropy variation in FePt-C soft/hard multilayer films

Multilayer exchange spring media were fabricated by subsequently reducing the deposition temperature of the FePt-C film from the bottom layer to the top layer. Magnetic anisotropy and coercivity of FePt-C film increased with the increasing of deposition temperature because the chemical ordering of L1{sub 0} FePt improved with deposition temperature. A two-layer microstructure was observed in the multilayer samples with a closely-packed granular hard layer and an isolated granular overlayer consisting of the soft magnetic layers deposited at lower temperatures. The coercivity of the tri-layer media was reduced to 5.4 kOe, half of that of the hard single layer FePt-C (10.8 kOe). The thermal stability of the multilayer structure was maintained although some soft magnetic layers involved.

36 MATERIALS SCIENCE↗

Modulation periodicity dependent structure, stress, and hardness in NbN/W{sub 2}N nanostructured multilayer films

NbN/W{sub 2}N nano-multilayer films with a modulation periodicity, {Lambda}, ranging from 5.1 to 157.4 nm have been deposited on a Si(100) substrate by reactive magnetron sputtering in Ar/N{sub 2} mixtures. The {Lambda} dependent structural and mechanical properties for the resulting NbN/W{sub 2}N multilayers have been evaluated by means of low-angle x-ray reflectivity, x-ray diffraction, high-resolution transmission electron microscope, and nanoindentation measurements. The finding is that for films with {Lambda}{<=} 10.6 nm, fcc NbN layers are coherent with cubic W{sub 2}N layers, resulting in NbN layers and W{sub 2}N layers that are in the compressive and tensile states, respectively. In contrast, as {Lambda} is larger than 10.6 nm, a phase transition from W{sub 2}N to W occurs in the W{sub 2}N layer, which is a result of the coherent interface strain relaxation. For this case, all layers are in the compressive state, and the coherent interface disappears. The intrinsic compressive stress evolution with {Lambda} can be interpreted in terms of interface stress. The formation of coherent interface at small {Lambda} ({<=}10.6 nm) is helpful for releasing point defects in layers, leading to a low compressive stress ({<=}1.1 GPa). The hardness for the obtained multilayer film increases with decreasing {Lambda}, and approaches a maximum value of 43.7 GPa when {Lambda} is 7.4 nm. The maximum strengthen at lower {Lambda} is mainly attributed to coherent interface stresses and the modulus difference between the NbN and W{sub 2}N layers. The increase in hardness with a decrease in {Lambda} is interpreted by the Lehoczky model.

36 MATERIALS SCIENCE↗