Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MgO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1977

Basalts from Mare Crisium

The stratified core sample returned from Mare Crisium by the Luna 24 unmanned space probe is composed primarily of a variety of subophitic to ophitic basalt with very low contents of TiO2 and MgO. This consists of clinopyroxene, calcic plagioclase, olivine, and minor amounts of silica, chromite, ulvoespinel, ilmenite, troilite, apatite, and Fe-metal. Granular metabasalts have the same bulk composition, but mineral phases exhibit less compositional variation. Fine-grained impact melts have similar compositions and are apparently derived from these basalts. It is concluded that the basalts, which are chemically distinct from the very-low-titanium basalts found elsewhere on the moon, represent the local surface flows of Mare Crisium. Sparse fragments of an olivine vitrophyre that is low in TiO2 but high in MgO and approaches the composition of the Apollo 15 green glasses may be derived from patches of dark mantling materials 20 km from the landing site.

Ryder, G.↗
NASA NTRS1977

Effects of thermal metamorphism on compositions of lunar spinels

The reported study represents an attempt to evaluate experimentally the compositional and textural changes that are likely to be observed in the Fe-Ti-Cr spinels of lunar igneous rocks by subsequent thermal metamorphism. The Apollo 12 igneous rock, 12018,43, was chosen for this investigation because an earlier study of another fraction of this rock by El Goresy et al. (1971) has reported an almost continuous trend of spinel compositions between Cr-Ulvoespinel and Ti-chromite. The nature of the compositional changes in the heated spinels (and ilmenites) is found to be such that the changes cannot be explained by intragranular adjustments alone. In the heated sample, pyroxene grains adjacent to the high-Ti spinels show a decrease in FeO, and an increase in MgO and Al2O3 at the interface. This may account for the MgO depletion and a part of the FeO enrichment in the high-Ti spinels. It is believed that the heating experiment demonstrates that thermal metamorphism of lunar basalts is likely to modify the compositions of their preexisting spinels (and ilmenites).

Misra, K. C.↗
NASA NTRS1978

Uniform magnesium oxide adsorbents

Kr adsorption on MgO is used to characterize the surface uniformity of MgO smoke and thermally decomposed Mg(OH)2. It is found that initially heterogeneous samples develop progressively sharper stepwise isotherms with increasingly-high-temperature heat treatment, apparently due to the removal of imperfections and high-energy facets, leaving surfaces of highly uniform (100) planes.

Dash, J. G.↗
NASA NTRS1978

Chemical and Sr-isotopic characteristics of the Luna 24 samples

The chemical and Sr isotopic characteristics of Luna 24 bulk soil samples are determined and interpreted within the framework of lunar mare basalt evolution. Major and trace element compositions lead to the suggestion of candidate rock types consisting of a basalt/gabbro with very low TiO2 and MgO content (52%), a very low TiO2 basalt with 10% MgO (23%), olivine vitrophyre (20%), low K Fra Mauro basalt (4%) and anorthositic gabbro (1%). The proposed compositions are supported by the agreement of mixing models based on the proposed compositions with observed soil compositions. Sr ratios for plagioclase samples imply a lower Sr-87/Sr-86 value for low Mg soils than for other mare basalts and higher Rb/Sr and a more evolved Sr ratio in high Mg basalts. Rb, Sr and rare earth element compositions for low Mg basalts fit a model of partial remelting of cumulates containing small amounts of plagioclase.

Nyquist, L. E.↗
NASA NTRS1981

Derivation of a heterogeneous lithic fragment in the Bovedy L-group chondrite from impact-melted porphyritic chondrules

Results are presented of petrographic, compositional and dating analyses of a light-colored lithic fragment in the L-group Bovedy meteorite that has a composition different from that of the host chondrite. Polished thin sections of the lithic fragment, host, and the fragment-host boundary were examined microscopically and analyzed by electron microprobe, metallic Ni-Fe, and instrumental neutron activation techniques; chips of the fragment were also used for Ar-39/Ar-40 dating and oxygen isotope analyses. The poikilitic textures, olivine, low-Ca pyroxene and kamacite composition and low Na2O, K2O and P2O5 contents of the fragment indicate that it represents a solidified, slightly fractionated impact melt formed from a source rich in porphyritic chondrules. A progressive increase on MgO content across the fragment is accounted for by the heterogeneous nucleation of MgO-rich phases. The Ar data indicate that the Bovedy lithic fragment and its host were partly degassed of radiogenic Ar less than 0.94 billion years ago, probably due to shock. The data are consistent with a cooling rate of about 5 C/million years through 500 C, which must have resulted from the burial of the assemblage beneath insulating material on the parent body at depths of at least several km.

Rubin, A. E.↗
NASA NTRS1983

Mars Geoscience Orbiter and Lunar Geoscience Orbiter

The feasibility of using the AE/DE Earth orbiting spacecraft design for the LGO and/or MGO missions was determined. Configurations were developed and subsystems analysis was carried out to optimize the suitability of the spacecraft to the missions. The primary conclusion is that the basic AE/DE spacecraft can readily be applied to the LGO mission with relatively minor, low risk modifications. The MGO mission poses a somewhat more complex problem, primarily due to the overall maneuvering hydrazine budget and power requirements of the sensors and their desired duty cycle. These considerations dictate a modification (scaling up) of the structure to support mission requirements.

Fuldner, W. V.↗
NASA NTRS1983

Temperatures of shock-induced shear instabilities and their relationship to fusion curves

New emission spectra for MgO and CaAl2Si2O8 (glass) are observed from 430 to 820 nm. Taken with previous data, it is suggested that transparent solids display three regimes of light emission upon shock compression to successively higher pressures: (1) characteristic radiation such as observed in MgO and previously in other minerals, (2) heterogeneous hot spot (greybody) radiation observed in CaAl2Si2O8 and previously in all transparent solids undergoing shock-induced phase transformations, and (3) blackbody emission observed in the high pressure phase regime in NaCl, SiO2, CaO, CaAl2Si2O8, and Mg2SiO4. The onset of the second regime may delineate the onset of shock-induced polymorphism whereas the onset of the third regime delineates the Hugoniot pressure required to achieve local thermal equilibrium in the shocked solid. It is also proposed that the hot spot temperatures and corresponding shock pressures determined in the second regime delineate points on the fusion curves of the high pressure phase.

Schmitt, D. R.↗
NASA NTRS1984

Two forsterite-bearing FUN inclusions in the Allende meteorite

Two forsterite-, fassaite-, spinel-rich inclusions in Allende which share common mineralogy and texture with three previously described inclusions are described. These inclusions were at least partially molten at temperatures over 1400 C, and their crystallization sequence was spinel, olivine, fassaite, and Mg-rich melilite. At least some of them experienced partial volatilization of MgO and SiO2 from their outer margins. At least one of the inclusions is highly enriched in MgO relative to CaO and Al2O3 compared to Allende coarse-grained inclusions, although it is just as strongly enriched in refractory trace elements as the latter, relative to C1 chondrites. Two of the objects are FUN inclusions on the basis of their oxygen, magnesium, and silicon isotopic compositions.

Clayton, R. N.↗
NASA NTRS1984

Remarks on a vibronic origin for the diffuse band spectrum

It has been demonstrated that the diffuse band spectrum could not originate as a series of vibronic transitions from atomic impurities in interstellar MgO grains as has recently been proposed since laboratory spectra of such materials show no evidence for such complex structure. Furthermore, recent observational evidence indicates that the extinction feature at 160 nm in the standard interstellar extinction curve upon which the identification of interstellar MgO was founded is actually the result of a calibration error in the original observational data.

Nuth, J. A.↗
NASA NTRS1985

Origin of howardites, diogenites and eucrites - A mass balance constraint

Two petrogenetic models for the noncumulate-basaltic parts of howardite meteorites are discussed. A mass balance constraint is developed which indicates that more than half of the basaltic components in howardites formed as residual liquids from fractional crystallization of melts that had earlier produced diogentelike pyroxene cumulate components. Other model constriants involving scandium trends, clustering near olivine-pyroxene-plagioclase peritectic, and MgO/(MgO + FeO) ratios are discussed.

Warren, P. H.↗
NASA NTRS1986

Si3N4-Based Ceramic With Greater Hot Strength

Zyttrite-doped material outperforms MgO-doped material above 1,200 degrees C. New ceramic material produced by addition of 10 weight percent zyttrite (yttria-stabilized zirconia) to (silicon nitride) offers significantly-improved high-temperature properties (those of MgO-doped Si3N4 ceramic). Work also showed that controlled Si3N4 powder with 10 weight percent zyttrite, significant improvement in room-temperature strength achieved. Variety of high-temperature structural applications are silicon nitride and silicon carbide. Potential for use in aircraft and automobile engines and in electric-power generating systems. Improved properties strongly suggest that the 10-weight percent zyttrite/Si3N4 material has strong potential for high-temperature applications.

Dutta, S.↗
NASA NTRS1986

Relation between microstructural heterogeneous surface layer and nitrogen pressure during sintering in Si3N4-Ml2O3 ceramics

The effects of N2 pressure (0.1 to 50 MPa) during sintering on the thickness of the microstructurally heterogeneous layer (MHL) formed near the surface of the compact, transverse-rupture strength, were investigated for Si3N4-(10 to 20) mol % MgO-5.5 mol % Al2O3 ceramics. The sintering temperature and time were 1973 K and 3.6 ks, respectively. The N2 gas was introduced into the furnace at about 1273 K. When the compacts were sintered under a certain N2 pressure, for example, about 20 and 7 MPa for 10 and 15 mol% MgO, respectively, the evolutions of N and Si were suppressed. The thickness of the MHL became very small and at the same time the strength of the surface layer of the compact (which was normally less than that of the inside in the case of 0.1 MPa) became nearly the same value as that of the inside. At higher pressure, the strength of both surface layer and the inside decreased considerably. Some discussion was made on these results.

Hayashi, K.↗
NASA NTRS1986

Carbon in oxides and silicates - Dissolution versus exsolution

A theory of CO2 dissolution in the solid state is developed, using the idea proposed by Freund (1983) concerning dissolution of CO/CO2 in MgO on the basis of their experimental results obtained with an MgO-containing carbon impurity. It is shown that the dissolution mechanism may be linked to an internal redox reaction by which a certain number of lattice oxygens change their formal oxidation state from -2 to -1, while the carbon becomes reduced. The similarities between the mechanisms of CO and/or CO2 dissolution and that of H2O dissolution are pointed out. A hypothesis is proposed concerning the exsolution of reduced carbon from supersaturated solid solutions under conditions which permit C-C bond formation.

Freund, F.↗
NASA NTRS1987

Structure and grain coarsening during the processing of engineering ceramics

Studies have been made of three ceramic systems (Al2O3, Y2O3/MgO, and SiC/C/B), both to explore a surface area/density diagram approach to examining the coarsening processes during sintering and to explore an alternative coarsening parameter, i.e., the grain boundary surface area (raising it at a given value of the density) and not the pore surface area; therefore, pinning of the grain boundaries by solid-solution drag is the only function evidenced by these results. The importance of such pinning even at densities as low as 75% of theoretical is linked to the existence of microstructural inhomogeneities. The early stages of sintering of Y2O3 powder have been examined using two techniques, BET surface area analysis and transmission electron microscopy. Each has given some insight into the process occurring and, used together, have provided some indication of the effect of MgO on coarsening during sintering. Attempts to further elucidate effects of MgO on the coarsening behavior of Y2O3 by the surface area/density diagram approach were unsuccessful due to masking effects of contaminating reactions during sintering and/or thermal etching. The behavior of the undoped SiC which only coarsens can be clearly distinguished by the surface area/density diagram from that of SiC/C/B which also concurrently densifies. Little additional information was obtainable by this method due to unfavorable sample etching characteristics. The advantages, disadvantages, and difficulties of application of these techniques to the study of coarsening during sintering are discussed.

Shaw, Nancy J.↗
NASA NTRS1988

Mid to late proterozoic magmatism within Northeastern North America and its iplications for the growth of the continental crust

Recent studies of the mangerite-charnockite-alaskite suite exposed in the Adirondack Highlands strongly suggest that these rocks were emplaced under anorogenic, or mildly extensional, conditions. The characteristic signatures of the rocks are high (FeO/FeO+MgO) and (FeO/Fe2O3); mildly alkaline to subalkaline and metaluminous trends; high Ga/Al2O3; and within plate concentrations of Nb vs Y, Ta vs Yb, Rb vs (Y+Nb), and Rb vs (Yb+Ta). Evolved members of the series are low in CaO and MgO and high in alkalies and halogens. All of these properties are consistent with anorogenic magmatism comprising acidic crustal melts and mantle derived mafic additions to the crust. Major and minor element trends, as well as field evidence, strongly suggest that the anorogenic acidic suite is coeval, but not comagmatic, with closely associated anorthositic massifs. Present outcrop configurations are consistent with the evolution of the acidic and anorthositic rocks in zoned, bimodal magma chambers cored by the mafic constituents and overlain by explosive, caldera-type volcanism. Age determinations indicate that the emplacement of the anorthosite-charnockite suite extended over approximately 500 Ma in the Grenville and adjacent Nain, Provinces.

Mclelland, J. M.↗
NASA NTRS1989

Sequentially evaporated thin Y-Ba-Co-O superconducting films on microwave substrates

The development of high T sub c superconducting thin films on various microwave substrates is of major interest in space electronic systems. Thin films of YBa2Cu3O(7-Delta) were formed on SrTiO3, MgO, ZrO2 coated Al2O3, and LaAlO3 substrates by multi-layer sequential evaporation and subsequent annealing in oxygen. The technique allows controlled deposition of Cu, BaF2 and Y layers, as well as the ZrO buffer layers, to achieve reproducibility for microwave circuit fabrication. The three layer structure of Cu/BaF2/Y is repeated a minimum of four times. The films were annealed in an ambient of oxygen bubbled through water at temperatures between 850 C and 900 C followed by slow cooling (-2 C/minute) to 450 C, a low temperature anneal, and slow cooling to room temperature. Annealing times ranged from 15 minutes to 5 hrs. at high temperature and 0 to 6 hr. at 450 C. Silver contacts for four probe electrical measurements were formed by evaporation followed with an anneal at 500 C. The films were characterized by resistance-temperature measurements, energy dispersive X-ray spectroscopy, X-ray diffraction, and scanning electron microscopy. Critical transition temperatures ranged from 30 K to 87 K as a function of the substrate, composition of the film, thicknesses of the layers, and annealing conditions. Microwave ring resonator circuits were also patterned on these MgO and LaAlO3 substrates.

Valco, G. J.↗
NASA NTRS1989

Measurements of complex permittivity of microwave substrates in the 20 to 300 K temperature range from 26.5 to 40.0 GHz

A knowledge of the dielectric properties of microwave substrates at low temperatures is useful in the design of superconducting microwave circuits. Results are reported for a study of the complex permittivity of sapphire (Al2O3), magnesium oxide (MgO), silicon oxide (SiO2), lanthanum aluminate (LaAlO3), and zirconium oxide (ZrO2), in the 20 to 300 Kelvin temperature range, at frequencies from 26.5 to 40.0 GHz. The values of the real and imaginary parts of the complex permittivity were obtained from the scattering parameters, which were measured using a HP-8510 automatic network analyzer. For these measurements, the samples were mounted on the cold head of a helium gas closed cycle refrigerator, in a specially designed vacuum chamber. An arrangement of wave guides, with mica windows, was used to connect the cooling system to the network analyzer. A decrease in the value of the real part of the complex permittivity of these substrates, with decreasing temperature, was observed. For MgO and Al2O3, the decrease from room temperature to 20 K was of 7 and 15 percent, respectively. For LaAlO3, it decreased by 14 percent, for ZrO2 by 15 percent, and for SiO2 by 2 percent, in the above mentioned temperature range.

Miranda, Felix A.↗
NASA NTRS1989

Millimeter wave transmission studies of YBa2Cu3O7-delta thin films in the 26.5 to 40.0 GHz frequency range

Millimeter wave transmission measurements through YBa2Cu3O(7-delta) thin films on MgO, ZrO2 and LaAlO3 substrates, are reported. The films (approx. 1 micron) were deposited by sequential evaporation and laser ablation techniques. Transition temperatures T sub c, ranging from 89.7 K for the Laser Ablated film on LaAlO3 to approximately 72 K for the sequentially evaporated film on MgO, were obtained. The values of the real and imaginary parts of the complex conductivity, sigma 1 and sigma 2, are obtained from the transmission data, assuming a two fluid model. The BCS approach is used to calculate values for an effective energy gap from the obtained values of sigma sub 1. A range of gap values from 2 DELTA o/K sub B T sub c = 4.19 to 4.35 was obtained. The magnetic penetration depth is evaluated from the deduced values of sigma 2. These results are discussed together with the frequency dependence of the normalized transmission amplitude, P/P sub c, below and above T sub c.

Miranda, F. A.↗