Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mg”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Isotopic yields of Mg, Al from the carbon and neon zones in the explosion of a massive star

A model is developed for the nucleosynthetic yields from the supernova explosion of a massive star of the sort which has been proposed as the initiating event in the formation of the solar system by Cameron and Truran (1977). Calculations start with the Hugoniot curves, estimating the preshock conditions from a 25 solar masses model at the start of core collapse. It is shown that the products of static carbon burning dominate abundance patterns in the ejecta. Both explosive carbon burning and explosive neon burning contribute significantly to Al-26. The production of Al-26 in this model is consistent with the trigger hypothesis.

Morgan, J. A.↗

Ion microprobe analysis and petrogenetic interpretations of Li, Mg, Ti, K, Sr, Ba in lunar plagioclase

The ion microprobe employed in the considered investigation utilizes a focused primary ion beam to sputter a tiny volume of a sample. A small fraction of the sputtered atoms is ionized and extracted from the sample region for subsequent analysis with a mass spectrometer. A systematic study was conducted to determine which elements can be detected and analyzed in lunar Ca-rich plagioclase. Attention is given to the method of quantitative determination, the selected samples, and aspects of data presentation. A number of general conclusions are discussed. All minor elements in plagioclases from anorthosites from several lunar sites show a restricted range consistent with a common origin. The simplest interpretation is that the anorthosites developed from a moon-wide event, or at least from closely-related events. A moon-wide magma ocean would satisfy this condition.

Steele, I. M.↗

Interstellar Al-26 and excess Mg-26

Evidence of a possible supernova explosion that occured very near the Earth is presented by the presence of radioactive 26 Aluminum (26 Al). The time of the supernova explosion is placed at approximately 100,000 years ago and is partially supported by cosmic gamma ray measurements from both HEAO 3 and the Solar Maximum Mission.

Clayton, D. D.↗

The mean ionic charges of N, Ne, MG, SI and S in solar energetic particle events

The mean ionic charges of nitrogen, neon, magnesium, silicon, and sulfur in solar flare particle events were determined for 12 flares during the time interval from September 1978 to September 1979. The observations were carried out with the MPI/UoMd ULEZEQ Sensor on the ISEE-3 satellite comparing the results with mean charge states established in a hot coronal plasma under equilibrium conditions, different temperatures for different elements are discussed. These range from approx. 2 million K to 7 million K in a single flare. From flare to flare the variation in temperature for each element is less than the variation between different ion species.

Luhn, A.↗

Observations of E and F region Mg(+) from Spacelab 1

Images of airglow at 2800 A were taken on the Spacelab 1 Shuttle mission and have been interpreted to be solar resonant emission of magnesium ions. On two orbital passes, observations were made near the magnetic equator while observing in the 2800-A channel. The observations were made near the sunset terminator (approximately 1800 LT), in winter (1983, day 335). Three separate emission clouds were observed, all of which extended well into the F region. The location of the clouds in horizontal space is shown. The processed images have been pseudocolored to highlight the intensity distribution in the clouds. Observations included clouds with apparent magnetic-field aligned striations. Bright emissions were observed at the magnetic equator, at 12-deg north magnetic latitude, and at 12-deg south magnentic latitude. Cloud-center brightnesses varied between 680 rayleighs and 1700 rayleighs.

Mende, S. B.↗

The origin of pristine KREEP: Effects of mixing between ur KREEP and the magmas parental to the MG-rich cumulates

The magnesium/incompatible elements paradox is explained by a model that considers not only the magmasphere, but also its aftermath. A systematic mixing of primitive magnesium rich material with residual liquid is discussed as a method to account for the paradox that KREEP basalts, despite their high incompatible element contents, have moderate magnesium ratios. The KREEP basalts are compared with mare basalts.

Warren, P. H.↗

Fe-Mg-Mn relations of ureilite olivines and pyroxenes and the genesis of ureilites

Microprobe analyses of ureilite and pigeonite cores are studied. The Fe/Mn-Fe/Mg relationship in the olivine core is examined. It is observed that magnetic processs such as fractional crystallization and partial melting, and FeO reduction contribute to the olivine core composition. The study of the Mg/Mn and Fe/Mn distributions reveals that these two distributions are not in equilibrium in the olivine and pigeonite cores. The effect of a reducing agent, carbon, on the ureilite genesis is investigated. It is concluded that fractional crystallization and FeO reduction are the major processes of ureilite genesis.

Mittlefehldt, D. W.↗

The MIT-Green Bank (MG) 5 GHz survey

The catalog yielded by the MIT-Green Bank 5-GHz survey contains 5974 sources with S/N ratio greater than 5; a supplemental catalog contains 3836 possible detections with S/N of less than 5. The reliability of the main list is measured to be about 96 percent, with a completeness of about 95 percent. Flux density errors are a function of flux density. A comparison is presently made of survey sources from the Douglas et al. (1980) 365-MHz Texas survey; spectral indices are computed for coincident sources, and the distribution of spectral indices is discussed.

Bennett, C. L.↗

Advanced rotary engine components utilizing fiber reinforced Mg castings

Under a two-phase program sponsored by NASA, the technology for producing advanced rotary engine components utilizing graphite fiber-reinforced magnesium alloy casting is being developed. In Phase I, the successful casting of a simulated intermediate housing was demonstrated. In Phase II, the goal is to produce an operating rotor housing. The effort involves generation of a material property data base, optimization of parameters, and development of wear- and corrosion-resistant cast surfaces and surface coatings. Results to date are described.

Goddard, D.↗

Microstructure/mechanical property relationships for various thermal treatments of Al-Cu-Mg-X PM aluminum alloys

The thermal response and aging behavior of three 2XXX-series powder metallurgy aluminum alloys have been investigated, using Rockwell B hardness measurements, optical and electron microscopy, and energy-dispersive chemical analysis, in order to correlate microstructure with measured mechanical properties. Results of the thermal response study indicated that an increased solution heat treatment temperature was effective in resolutionizing large primary constituents in the alloy bearing more copper but had no apparent effect on the microconstituents of the other two. Aging studies conducted at room temperature and at 120, 150, and 180 C for times ranging up to 60 days indicated that classic aging response curves, as determined by hardness measurements, occurred at lower aging temperatures than were previously studied for these alloys, as well as at lower aging temperatures than are commonly used for ingot metallurgy alloys of similar compositions. Microstructural examination and fracture surface analysis of peak-aged tension specimens indicated that the highest tensile strengths are associated with extremely fine and homogeneous distributions of theta-prime or S-prime phases combined with low levels of both large constituent particles and dispersoids. Examination of the results suggest that refined solution heat treatments and lower aging temperatures may be necessary to achieve optimum mechanical properties for these 2XXX series alloys.

Blackburn, L. B.↗

Consolidation processing parameters and alternative processing methods for powder metallurgy Al-Cu-Mg-X-X alloys

The effects of varying the vacuum degassing parameters on the microstructure and properties of Al-4Cu-1Mg-X-X (X-X = 1.5Li-0.2Zr or 1.5Fe-0.75Ce) alloys processed from either prealloyed (PA) or mechanically alloyed (M) powder, and consolidated by either using sealed aluminum containers or containerless vacuum hot pressing were studied. The consolidated billets were hot extruded to evaluate microstructure and properties. The MA Li-containing alloy did not include Zr, and the MA Fe- and Ce-containing alloy was made from both elemental and partially prealloyed powder. The alloys were vacuum degassed both above and below the solution heat treatment temperature. While vacuum degassing lowered the hydrogen content of these alloys, the range over which the vacuum degassing parameters were varied was not large enough to cause significant changes in degassing efficiency, and the observed variations in the mechanical properties of the heat treated alloys were attributed to varying contributions to strengthening by the sub-structure and the dispersoids. Mechanical alloying increased the strength over that of alloys of similar composition made from PA powder. The inferior properties in the transverse orientation, especially in the Li-containing alloys, suggested deficiencies in degassing. Among all of the alloys processed for this study, the Fe- and Ce-containing alloys made from MA powder possessed better combinations of strength and toughness.

Sankaran, K. K.↗

Electrical conductivity of (Mg,Fe)SiO3 Perovskite and a Perovskite-dominated assemblage at lower mantle conditions

Electrical conductivity measurements of Perovskite and a Perovskite-dominated assemblage synthesized from pyroxene and olivine demonstrate that these high-pressure phases are insulating to pressures of 82 GPa and temperatures of 4500 K. Assuming an anhydrous upper mantle composition, the result provides an upper bound of 0.01 S/m for the electrical conductivity of the lower mantle between depths of 700 and 1900 km. This is 2 to 4 orders of magnitude lower than previous estimates of lower-mantle conductivity derived from studies of geomagnetic secular variations.

Li, Xiaoyuan↗

O-16 excesses in Murchison and Murray hibonites - A case against a late supernova injection origin of isotopic anomalies in O, Mg, Ca, and Ti

Ion probe measurements of the oxygen isotopic composition of seven hibonite samples from the CM chondrites Murchison and Murray are reported. All samples show large O-16 excesses relative to terrestrial oxygen. The data for all samples plot along the carbonaceous chondrite O-16-rich mixing line and show no evidence for isotopic mass fractionation effects characteristic of FUN inclusions. These hibonites have the largest Ca-48 and Ti-50 isotopic anomalies found to date; thus there is no intrinsic relationship between anomalies of a nucleosynthetic origin and isotopic mass fractionation effects. The large O-16 excess seen in the sample with the largest measured Ca-48 and Ti-50 depletions argues against a late injection of exotic material from a nearby supernova as a source for the isotopic anomalies.

Fahey, A. J.↗