Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Methanol”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

New black indium oxide—tandem photothermal CO 2 -H 2 methanol selective catalyst

It has long been known that the thermal catalyst Cu/ZnO/Al 2 O 3 (CZA) can enable remarkable catalytic performance towards CO 2 hydrogenation for the reverse water-gas shift (RWGS) and methanol synthesis reactions. However, owing to the direct competition between these reactions, high pressure and high hydrogen concentration (≥75%) are required to shift the thermodynamic equilibrium towards methanol synthesis. Herein, a new black indium oxide with photothermal catalytic activity is successfully prepared, and it facilitates a tandem synthesis of methanol at a low hydrogen concentration (50%) and ambient pressure by directly using by-product CO as feedstock. The methanol selectivities achieve 33.24% and 49.23% at low and high hydrogen concentrations, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Partial oxidation of methane to methanol on boron nitride at near critical acetonitrile

Abstract Direct catalytic conversion of methane to methanol with O 2 has been a fundamental challenge in unlocking abundant natural gas supplies. Metal-free methane conversion with 17% methanol yield based on the limiting reagent O 2 at 275 °C was achieved with near supercritical acetonitrile in the presence of boron nitride. Reaction temperature, catalyst loading, dwell time, methane–oxygen molar ratio, and solvent-oxygen molar ratios were identified as critical factors controlling methane activation and the methanol yield. Extension of the study to ethane (C2) showed moderate yields of methanol (3.6%) and ethanol (4.5%).

03 NATURAL GAS↗

Size-dependent femtosecond proton transfer in protonated methanol clusters

Methanol clusters (CH 3 OH) n are prototypical hydrogen-bonded systems that bridge isolated molecules and bulk liquid methanol. Strong-field ionization of these clusters can trigger ultrafast charge migration, proton transfer, and isomerization; however, the onset timescales of these pathways remain largely unexplored despite extensive steady-state mass-spectrometric evidence for protonation and chemical rearrangement. Here we use femtosecond time-resolved strong-field ionization and disruptive probing to directly track the early-time dynamics of methanol clusters. Transient mass spectra yield size-dependent timescales for the formation of protonated clusters H + (CH 3 OH) n (n = 1–3) and an associated CHO˙ + radical cation. We find that both proton-transfer and subsequent stabilization become markedly faster with increasing cluster size. These measurements establish methanol clusters as a complementary benchmark to water for understanding ionization-initiated proton motion and chemical reorganization in hydrogen-bonded liquids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facet-specific interaction between methanol and TiO 2 probed by sum-frequency vibrational spectroscopy

Significance Facet engineering has become a major strategy for designing crystalline catalysts, yet many fundamental issues, including facet-specific interaction with adsorbates, remain unsolved due to lack of experimental investigation. Using surface-specific sum-frequency vibrational spectroscopy, we have conducted an in-depth study of methanol adsorption on four different facets of TiO 2 under ambient conditions. The spectra revealed that for the four facets investigated, dissociation of adsorbed methanol occurs only when surface defects are present. Adsorption kinetics and energetics appeared nearly the same on different facets, but the Fermi resonance coupling strength for CH 3 of adsorbed methanol was found to depend sensitively on facets and methanol coverage, and could serve as a gauge for studying facet effects on molecular adsorption and surface reactions.

Yang, Deheng↗

The Methanol Economy Project

The Methanol Economy Project is based on the concept of replacing fossil fuels with methanol generated either from renewable resources or abundant natural (shale) gas. The full methanol cycle was investigated in this project, from production of methanol through bromination of methane, bireforming of methane to syngas, CO 2 capture using supported amines, co-electrolysis of CO 2 and water to formate and syngas, decomposition of formate to CO 2 and H 2 , and use of formic acid in a direct formic acid fuel cell. Each of these projects achieved milestones and provided new insights into their respective fields.

03 NATURAL GAS↗

Process Design and Economics for the Conversion of Lignocellulosic Biomass to High Octane Gasoline: Thermochemical Research Pathway with Indirect Gasification and Methanol Intermediate

The U.S. Department of Energy (DOE) promotes research for enabling cost-competitive liquid fuels production from lignocellulosic biomass feedstocks. The research is geared to advance the state of technology (SOT) of biomass feedstock supply and logistics, conversion, and overall system sustainability. As part of their involvement in this program, the National Renewable Energy Laboratory (NREL) and the Pacific Northwest National Laboratory (PNNL) investigate the economics of conversion pathways through the development of conceptual biorefinery process models. This report describes in detail one potential conversion process for the production of high octane gasoline blendstock via indirect liquefaction (IDL). The steps involve the conversion of biomass to syngas via indirect gasification followed by gas cleanup and catalytic syngas conversion to a methanol intermediate; methanol is then further catalytically converted to high octane hydrocarbons. The conversion process model leverages technologies previously advanced by research funded by the Bioenergy Technologies Office (BETO) and demonstrated in 2012 with the production of mixed alcohols from biomass. Biomass-derived syngas cleanup via tar and hydrocarbons reforming was one of the key technology advancements as part of that research. The process described in this report evaluates a new technology area with downstream utilization of clean biomass-syngas for the production of high octane hydrocarbon products through a methanol intermediate, i.e., dehydration of methanol to dimethyl ether (DME) which subsequently undergoes homologation to high octane hydrocarbon products.

09 BIOMASS FUELS↗

Methanol from Integrated Direct Air Capture and Ceramic Electrolysis (MIDACE)

The Methanol from Integrated Direct Air Capture and Ceramic Electrolysis (MIDACE) project advanced a novel system concept for integrating pressurized co-electrolysis of steam and crude carbon dioxide captured directly from ambient air using a sorbent technology. The co-electrolysis produced syngas provides feedstock for a gas-to-liquid methanol synthesis reactor. The system recovers waste heat from the reactor and electrolyzer into regenerating the direct air capture sorbent. The purpose of the project was to demonstrate critical integration elements of the design and perform a technical study illustrating how a large-scale installation could achieve the $800/ton program target for green methanol production. The concept addresses the program objective to consolidate operations by combining crude CO 2 cleanup, hydrogen production, and partial CO 2 reduction steps within a carbon tolerant high temperature electrolyzer. The design lowers costs by simplifying the methanol recovery cycle, reducing carbon losses from venting, reducing sensitivity to catalyst selectivity, and avoiding syngas compression.

10 SYNTHETIC FUELS↗

The Effect of a Reduction in the Catalyst Loading on a Mini Passive Direct Methanol Fuel Cell

Mini passive direct methanol fuel cells (mpDMFCs) appear to be a promising alternative for powering portable devices, since they use a liquid fuel, have a fast refuelling time, have a high efficiency and have a low environmental impact. However, some issues need to be solved before their commercialization, such as methanol crossover, short lifetime and high costs. The present work studies the effect of reducing the anode and cathode catalyst loading on the performance of a mpDMFC towards a reduction in the system costs and the characterization of the system losses. The undesirable losses that affect the fuel cell performance were identified and quantified using the electrochemical impedance spectroscopy (EIS) technique. Accordingly, a novel equivalent electric circuit (EEC) was proposed, accurately reproducing the mini pDMFC. In this work, a maximum power density of 7.07 mW cm−2 was obtained, with a methanol concentration of 5 M, using 2 mg cm−2 Pt-RuB and 4 mg cm−2 PtB. The mpDMFC allowed the cell to work with high methanol concentrations and reduced anode catalyst loadings.

Moreira, C. S.↗

Modelling bidirectional fluxes of methanol and acetaldehyde with the FORCAsT canopy exchange model

Here, the FORCAsT canopy exchange model was used to investigate the underlying mechanisms governing foliage emissions of methanol and acetaldehyde, two short chain oxygenated volatile organic compounds ubiquitous in the troposphere and known to have strong biogenic sources, at a northern mid-latitude forest site. The explicit representation of the vegetation canopy within the model allowed us to test the hypothesis that stomatal conductance regulates emissions of these compounds to an extent that its influence is observable at the ecosystem scale, a process not currently considered in regional- or global-scale atmospheric chemistry models. Here, we found that FORCAsT could only reproduce the magnitude and diurnal profiles of methanol and acetaldehyde fluxes measured at the top of the forest canopy at Harvard Forest if light-dependent emissions were introduced to the model. With the inclusion of such emissions, FORCAsT was able to successfully simulate the observed bidirectional exchange of methanol and acetaldehyde. Although we found evidence that stomatal conductance influences methanol fluxes and concentrations at scales beyond the leaf level, particularly at dawn and dusk, we were able to adequately capture ecosystem exchange without the addition of stomatal control to the standard parameterisations of foliage emissions, suggesting that ecosystem fluxes can be well enough represented by the emissions models currently used.

99 GENERAL AND MISCELLANEOUS↗

Detection of solid methanol toward W33A

A recently detected absorption feature at 3.53 microns in the spectrum of W33A has been assigned to methanol (CH3OH). Its optical depth implies that methanol is the second most abundant molecule (7 percent relative to H2O) in the grain mantles in the line of sight toward W33A observed to date. Laboratory experiments have shown that the implied abundance is difficult to explain by UV irradiation of the dust grains alone. Grain surface reactions or condensation directly out of the gas phase must also play roles, but the relative contributions of the various processes are difficult to estimate. The optical depth of the 3.53-micron feature constrains the contribution of methanol to the 6.8-micron feature in W33A to be 10 percent or less, requiring the contribution of at least one other compound to this feature, while the estimated contribution to the 4.9-micron absorption band is even smaller. Only a small contribution of formaldehyde (H2CO) is consistent with the observed 3.53-micron band profile. In contrast to methanol, formaldehyde can be produced readily by photochemical reactions within the ice mantle.

Grim, R. J. A.↗

Methanol in the sky with diamonds

The present of gas phase methanol in dense interstellar molecular clouds was established by radio detection of its rotational emission lines. However, the position, width, and profile of a absorption band near 1470 cm(exp -1) in the IR spectra of many dense molecular clouds strongly suggests that solid methanol is an important component of interstellar ices. In an attempt to better constrain the identification of 1470 cm(exp -1) feature, we began a program to search for other characteristic absorption bands of solid state methanol in the spectra of objects known to produce this band. One such feature is now identified in the spectra of several dense molecular clouds and its position, width, and profile fit well with those of laboratory H2O:CH3OH ices. Thus, the presence of methanol-bearing ices in space is confirmed.

Allamandola, L. J.↗

10 micron spectra of protostars and the solid methanol abundance

A search has been made for the strong C-O stretching absorption of solid methanol near 9.8 microns toward the heavily obscured protostars AFGL 961, AFGL 2591, the BN object and Mon R2 IRS 3. There is no clear evidence for this feature in the spectra, resulting in very conservative upper limits to the methanol abundance of 6 percent to 17 percent relative to solid H2O toward these objects. This is well below previous estimates of 50-80 percent obtained toward W33 A, NGC 7538 IRS 9, AFGL 2136, and W3 IRS 5, which were based on the assignment of the interstellar 6.85 microns absorption feature to the methanol C-H bending mode. This study shows that such high methanol abundances are not a characteristic of all interstellar ices.

Schutte, W. A.↗

The electrolyte challenge for a direct methanol-air polymer electrolyte fuel cell operating at temperatures up to 200 C

Novel polymer electrolytes are being evaluated for use in a direct methanol-air fuel cell operating at temperatures in excess of 100 C. The evaluation includes tests of thermal stability, ionic conductivity, and vapor transport characteristics. The preliminary results obtained to date indicate that a high temperature polymer electrolyte fuel cell is feasible. For example, Nafion 117 when equilibrated with phosphoric acid has a conductivity of at least 0.4 Omega(exp -1)cm(exp -1) at temperatures up to 200 C in the presence of 400 torr of water vapor and methanol vapor cross over equivalent to 1 mA/cm(exp 2) under a one atmosphere methanol pressure differential at 135 C. Novel polymers are also showing similar encouraging results. The flexibility to modify and optimize the properties by custom synthesis of these novel polymers presents an exciting opportunity to develop an efficient and compact methanol fuel cell.

Savinell, Robert↗

Advances in direct oxidation methanol fuel cells

Fuel cells that can operate directly on fuels such as methanol are attractive for low to medium power applications in view of their low weight and volume relative to other power sources. A liquid feed direct methanol fuel cell has been developed based on a proton exchange membrane electrolyte and Pt/Ru and Pt catalyzed fuel and air/O2 electrodes, respectively. The cell has been shown to deliver significant power outputs at temperatures of 60 to 90 C. The cell voltage is near 0.5 V at 300 mA/cm(exp 2) current density and an operating temperature of 90 C. A deterrent to performance appears to be methanol crossover through the membrane to the oxygen electrode. Further improvements in performance appear possible by minimizing the methanol crossover rate.

Surampudi, S.↗

Methanol and hydrogen sulfide in comet P/Halley

The Neutral Mass Spectrometer on the Giotto spacecraft measured the gas and ion composition in the coma of comet P/Halley. A detailed model of the ion chemistry inside the contact surface located at 4660 km is used to interpret the measured ion desnity profiles in the 32 to 35 amu/e mass range. The masses 33 and 35 amu/e are dominated by the protonated methanol and hydrogen sulfide ions CH3OH2(+) and H3S(+). Both profiles are essentially compatible with CH3OH and H2S originating from the nucleus only. The production rates relative to water are Y(CH3OH) = Q(CH3OH)/Q(H2O) = 1.7% and Y(H2S) = 0.41%. Our Y(CH3OH) agrees well with a determination from IR spectra obtained about 6 weeks after the Giotto encounter with P/Halley. In 7 other comets IR and microwave observations give Y(CH3OH) values between about 0.7 and 6%, indicating that the methanol abundance shows a strong variability from comet to comet. In three other comets Y(H2S) values between 0.2 and 0.5% have been reported. In addition to H2S(+), only ions containing minor isotopes of H, C, O and S contribute to mass 34 amu/e (e.g. (34)S(+), (13)CH3OH2(+), CH4DO(+)). These contributions can be calculated from the measured densities of the ions containing the major isotopes and the H2S(+) contribution from the measured H3S(+) density. From mass 34 amu/e we can also derive an upper limit of 1% for the abundance of deuterated methanol. This limit is at most marginally compatible with a direct interstellar origin of the CH3OH in P/Halley as the measured interstellar abundance of deuterated methanol is 1 to 6%.

Eberhardt, P.↗

Theoretical Basis for Estimated Test Times and Conditions for Drop Tower and Space-Based Droplet Burning Experiments With Methanol and N-Heptane

In order to develop an extensive envelope of test conditions for NASA's space-based Droplet Combustion Experiment (DCE) as well those droplet experiments which can be performed using a drop tower, the transient vaporization and combustion of methanol and n-heptane droplets were simulated using a recently developed fully time-dependent, spherically symmetric droplet combustion model. The transient vaporization of methanol and n-heptane was modeled to characterize the instantaneous gas phase composition surrounding the droplet prior to the introduction of an ignition source. The results for methanol/air showed that the entire gas phase surrounding a 2 mm methanol droplet deployed in zero-g .quickly falls outside the lean flammability limit. The gas phase surrounding an identically-sized n-heptane droplet, on the other hand, remains flammable. The combustion of methanol was then modeled considering a detailed gas phase chemical kinetic mechanism (168 steps, 26 species) and the effect of the dissolution of flame-generated water into the liquid droplet. These results were used to determine the critical ignition diameter required to achieve quasi-steady droplet combustion in a given oxidizing environment. For droplet diameters greater than the critical ignition diameter, the model predicted a finite diameter at which the flame would extinguish. These extinction diameters were found to vary significantly with initial droplet diameter. This phenomenon appears to be unique to the transient heat transfer, mass transfer and chemical kinetics of the system and thus has not been reported elsewhere to date. The extinction diameter was also shown to vary significantly with the liquid phase Lewis number since the amount of water present in the droplet at extinction is largely governed by the rate at which water is transported into the droplet via mass diffusion. Finally, the numerical results for n-heptane combustion were obtained using both 2 step and 96 step semi-emperical chemical kinetic mechanisms. Neither mechanism exhibited the variation of extinction diameter with initial diameter.

Marchese, Anthony J.↗

Improved Anode for a Direct Methanol Fuel Cell

A modified chemical composition has been devised to improve the performance of the anode of a direct methanol fuel cell. The main feature of the modified composition is the incorporation of hydrous ruthenium oxide into the anode structure. This modification can reduce the internal electrical resistance of the cell and increase the degree of utilization of the anode catalyst. As a result, a higher anode current density can be sustained with a smaller amount of anode catalyst. These improvements can translate into a smaller fuel-cell system and higher efficiency of conversion. Some background information is helpful for understanding the benefit afforded by the addition of hydrous ruthenium oxide. The anode of a direct methanol fuel cell sustains the electro-oxidation of methanol to carbon dioxide in the reaction CH3OH + H2O--->CO2 + 6H(+) + 6e(-). An electrocatalyst is needed to enable this reaction to occur. The catalyst that offers the highest activity is an alloy of approximately equal numbers of atoms of the noble metals platinum and ruthenium. The anode is made of a composite material that includes high-surface-area Pt/Ru alloy particles and a proton-conducting ionomeric material. This composite is usually deposited onto a polymer-electrolyte (proton-conducting) membrane and onto an anode gas-diffusion/current-collector sheet that is subsequently bonded to the proton-conducting membrane by hot pressing. Heretofore, the areal density of noble-metal catalyst typically needed for high performance has been about 8 mg/cm2. However, not all of the catalyst has been utilized in the catalyzed electro-oxidation reaction. Increasing the degree of utilization of the catalyst would make it possible to improve the performance of the cell for a given catalyst loading and/or reduce the catalyst loading (thereby reducing the cost of the cell). The use of carbon and possibly other electronic conductors in the catalyst layer has been proposed for increasing the utilization of the catalyst by increasing electrical connectivity between catalyst particles. However, the relatively low density of carbon results in thick catalyst layers that impede the mass transport of methanol to the catalytic sites. Also, the electrical conductivity of carbon is less than 1/300th of typical metals. Furthermore, the polymer-electrolyte membrane material is acidic and most metals are not chemically stable in contact with it. Finally, a material that conducts electrons (but not protons) does not contribute to the needed transport of protons produced in the electro-oxidation reaction.

Valdez, Thomas↗

System and method for synthesis of dialkyl carbonates using carbon dioxide reaction with methanol and ammonia

A method and system for membrane-assisted production of high purity concentrated dimethyl carbonate by the reaction of carbon dioxide and methanol is provided. Carbon dioxide is recovered from flue gas or other dilute streams from industrial processes by a membrane and subsequent conversion takes place to an intermediate methyl carbamate by reacting of carbon dioxide with ammonia and methanol. For high-purity carbon dioxide obtained by one of the carbon capture technologies or by a process (such as, for example, ethanol fermentation process) the membrane reactor is replaced with a catalytic reactor for direct conversion of carbon dioxide to methyl carbamate by reacting with ammonia and methanol. The methyl carbamate is further reacted with methanol for conversion to dimethyl carbonate. An integrated reactive distillation process using side reactors is used for facilitating the catalytic reaction in the subject method for producing high purity dimethyl carbonate.

Panchal, Chandrakant B.↗