Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETISM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2018

Dependence of the Magnetic Transition Temperatures T{sub N1} and T{sub N2} and Magnetization Plateau of the 2D Checkerboard Lattice Structure with the Superblock (N,N)

Magnetic properties of the 2D checkerboard lattice structure with the superblock (N,N) were studied using Monte Carlo simulation based on the Ising model. Thermal magnetization and magnetic susceptibility of 2D checkerboard lattice with several superblocks are given. Two magnetic anomalies at collinear-to-spiral transition temperature t{sub C1} and transition temperature t{sub C2}have been determined. We discuss the effect of exchange interactions and superblocks on 2D checkerboard lattice. Magnetic hysteresis cycle of 2D checkerboard lattice for several superblocks have been shown. Superparamagnetic behaviour has been observed. Magnetization plateau, visible as anomalies in magnetic hysteresis, is one of the hallmarks of frustrated magnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2019

Magnetic and Thermal Design of HTS Quadrupole Magnet for Newly Developed Superconducting Proton Cyclotron Beam Line

A magnetic and thermal design of high-temperature superconducting (HTS) quadrupole magnet for newly developed superconducting proton cyclotron was presented in this research. With superconducting technology, the design can reduce the magnet size and remove the heat loads more efficiently. Calculations are conducted with finite element method (FEM) to study the quadrupole magnet’s magnetic and thermal properties. For the magnet cold-mass and cryostat system, the heat load is mainly generated by conduction and radiation. Multilayer thermal insulation and G10 supports are used to restrict them. The magnetic field distribution in the HTS coils is calculated to consider the critical current degradation of the YBCO tapes. The effects on the field gradient quality in relation to the pole tip profile and end chamfer are analyzed. The sixth multipole component in the integral field can be improved with end chamfer. Finally, a 20 T/m HTS quadrupole magnet with integral field uniformity less than 0.05% out to 75% of the inscribed radius is proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2018

Investigation of structural and magnetic properties of rapidly-solidified iron-silicon alloys at ambient and elevated temperatures

In this work, we investigated the ambient temperature structural properties (~300 K) and the ambient and high temperature (up to 900 K) direct current (DC) magnetic properties of melt-spun Fe-x wt.% Si (x = 3, 5, & 8) alloys. The wheel surface speeds selected for the study were 30 m/s and 40 m/s. The thickness, width, lattice parameter, saturation magnetization (MS), and intrinsic coercivity (HCI) of the melt spun ribbons are presented and compared with data in the literature. The ribbons produced at the lower wheel surface speed (30 m/s) were continuous having relatively uniform edges compared to the ribbons produced at the higher wheel surface speed. The thickness and the width of the melt-spun ribbons ranged between ~15-60 μm and 500-800 μm, respectively. The x-ray diffraction spectra of the melt-spun ribbons indicated the presence of disordered α-phase, irrespective of the composition, and the wheel-surface speed. The lattice parameter decreased gradually as a function of increasing silicon content from ~0.2862 nm (Fe-3 wt.% Si) to ~0.2847 nm (Fe-8 wt.% Si). Wheel surface speed was not shown to have a significant effect on the magnetization, but primarily impacted the ribbon structure. A decreasing trend in the saturation magnetization was observed as a function of increased silicon content. The intrinsic coercivity of the melt-spun alloys ranged between ~50 to 200 A/m. Elevated temperature evaluation of the magnetization in the case of Fe-3 & 5 wt.% Si alloy ribbons was distinctly different from the Fe-8 wt.% Si alloy ribbons. The curves of the as-prepared Fe-3 wt.% Si and Fe-5 wt.% Si alloy ribbons were irreversible while that of Fe-8 wt.% Si was reversible. The MS for any of the combinations of wheel surface speed and composition decreased monotonically with the increase in temperature (from 300 – 900 K). The percentage decrease in MS from 300 K to 900 K for the Fe-3 wt.% Si and Fe-5 wt.% Si alloys was ~19-22 %, while the percentage decrease in the same temperature range for Fe-8 wt.% Si alloy was ~26-30 %. It appears that Fe-3 wt.% Si and Fe-5 wt.% Si alloys ribbons are primarily comprised of the α phase (disordered phase) with any minor constituents being beyond the detection limits of the studies performed, while the Fe-8 wt.% Si alloy ribbons are comprised of disordered and regions of short-range ordering.

Elevated Temperature↗
DOE OSTI2022

Mechanically robust high magnetic-performance Sm-Co sintered magnets through microstructure engineering

Samarium-cobalt (Sm-Co) sintered magnets have high magnetic energy densities, great resistance to demagnetization and corrosion, and excellent thermal stability in a wide temperature range (–50–550 °C). However, the utilization of these magnets is restricted by their brittleness. Based on micromechanical and the Zener pinning model, Sm-Co sintered magnets with improved mechanical properties have been designed and fabricated via microstructure engineering. A small amount of fine Sm 2 O 3 particulates (0–3 wt%) has been incorporated into Sm 2 (CoFeCuZr) 17 sintered magnets to refine the grain size by up to approximately 50% (from 45 to 22 µm) and narrow the grain size distribution. Doping with 3 wt% Sm 2 O 3 increased the flexural strength by 62% while maintaining magnetic performance. Both grain-refined unimodal microstructure and heterogeneous laminated coarse/fine grain microstructure were formed by strategically designed assemblies of Sm 2 O 3 -added Sm-Co powder feedstock mixtures. The technology is compatible with existing magnet manufacturing processes. Numerical micromechanics simulation indicates that the fracture is dominated by intragranular mode. The mechanical strength is mainly enhanced by the additive-induced grain refinement, while the small amount of Sm 2 O 3 addition has a small direct positive contribution. Finally, these magnets will be more cost-effective, efficient, and robust for various functional applications.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Effects of magnetic field annealing on the hard magnetic properties of milled Nd-Fe-B powders

In this study, we report the effect of magnetic field annealing (MA) in relieving the stress induced during the milling of Nd-Fe-B sintered magnets. The effect of MA processing parameters and particle size on the magnetic properties were investigated. Based on the results, magnetic field annealing is more effective in improving the magnetic properties of larger size particles, compared to finer particles. Our computational study on the role of particle surface defects in bi-modal particle distribution agrees with results obtained experimentally. In conclusion, magnetic field annealed powder has been successfully used to develop 4.6 g.cm -3 density bonded magnets with 75 vol% of magnetic powder and polyamide 12 (nylon 12) polymer binder resulting in 11.3 MGOe energy product.

36 MATERIALS SCIENCE↗
DOE OSTI2013

Complex long-range magnetic ordering in the Mn-bearing dugganite Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14}

Spin liquids, multiferroics, and doubly-chiral helical structures are just some of the exotic magnetic states found in the langasite compounds. A subclass of the langasite group, the Te{sup 6+}-containing dugganites, has also shown exotic magnetism including magnetoelectric coupling, coexisting complex long-ranged ordered structures, and low-field induced magnetic transitions. Here, we present the first detailed structural study of Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14} as well as the first neutron scattering measurements. This material undergoes long-range magnetic ordering, similar to the multiferroic Ba{sub 3}NbFe{sub 3}Si{sub 2}O{sub 14}, at T{sub N}=6.6 K, which is consistent with previous magnetization measurements. However unlike any other langasite or dugganite studied to date, we present evidence of a large, pseudohexagonal incommensurate supercell that alters the nuclear and magnetic structures away from the langasite ideal. - Graphical abstract: Two geometrically frustrated cationic substructures of the langasites and dugganites have profound effects on the magnetism of these compounds. In Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14}, Mn{sup 2+} (S=5/2) isolated trinuclear units are shown in yellow, while the red distorted kagomé network is nonmagnetic. (For interpretation of the references to color the reader is referred to the web version of this article.) Highlights: • Polycrystalline Pb{sub 3}TeMn{sub 3}P{sub 2}O{sub 14} was prepared. • Found evidence of a large, pseudohexagonal supercell that is incommensurate with the subcell. • Long-range antiferromagnetic ordering is observed below T{sub N}=6.6 K similar to Ba{sub 3}NbFe{sub 3}Si{sub 2}O{sub 14}. • Broken symmetry probably causes magnetic peak splitting in this system.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Magnetic force microscopy revealing long range molecule impact on magnetic tunnel junction based molecular spintronics devices

Magnetic force microscopy (MFM) vividly showed that organometallic molecules, when bridged between two ferromagnetic electrodes along the cross-shaped magnetic tunnel junction edges transformed the magnetic electrodes itself. Molecules impacted a large area of ferromagnetic leads around the junction at room temperature and complement the previous magnetic measurements showing molecule effect on pillar form magnetic tunnel junctions. This molecule induced changes in the magnetic electrodes impacted the transport of the magnetic tunnel junction and stabilized as much as seven orders smaller current at room temperature. We have discussed the current suppression phenomenon in the recent publication [Ref. Tyagi et al. Organic Electronics, 2019, Vol. 64, p 188]; however, we did not provide any direct evidence of molecule impact on ferromagnetic electrodes around molecule junction. Our MFM studies in this paper suggests that molecule effect was observable several μm away from the molecule-metal junctions. Furthermore, our study suggests that magnetic tunnel junction based molecular spintronics devices can be a gateway to a vast range of commercially viable and robust futuristic computer devices and highly correlated materials.

42 ENGINEERING↗
DOE OSTI2013

Structure and magnetic properties of irradiated Fe/Fe oxide core-shell nanoclusters

A cluster deposition method was used to produce a film of loosely aggregated particles of Fe-Fe3O4 core-shell nanoclusters with an 8 nm iron core size and 2 nm oxide shell thickness. The film of particles on a silicon substrate was irradiated with 5.5 MeV Si2+ ions to a fluence of 1016 cm-2 near room temperature, and computer simulations based on the SRIM (Stopping and Range of Ions in Matter) code show that the implanted Si species stops near the film-substrate interface. The ion irradiation creates a structural change in the film with corresponding chemical and magnetic changes. X-ray diffraction shows that the core size and chemistry stay the same but the shell becomes FeO that grows to a thickness of 17 nm. Helium ion microscopy shows that the previously separate particles have densified into a nearly continuous film. Major loop magnetic hysteresis measurements show a decrease in saturation magnetization that we attribute to the presence of the antiferromagnetic (AFM) FeO shell. First-order reversal curve measurements on the irradiated film performed with a vibrating sample magnetometer show that the AFM shell prevents the particles from interacting magnetically, leading to low coercivity from the iron core and little bias field from the core interactions. These results, and others reported previously on different compositions (Fe3O4 or FeO+Fe3N nanoclusters), show that the ion irradiation behavior of nanocluster films such as these depends strongly on the initial nanostructure and chemistry.

Environmental Molecular Sciences Laboratory↗
DOE OSTI2013

Magnetic properties of Co{sub 2−x}TM{sub x}C and Co{sub 3−x}TM{sub x}C nanoparticles

Using synthetic chemical approaches, it is now possible to synthesize transition metal carbides nanoparticles with morphology, where the transition metal layers are embedded with intervening layers of carbon atoms. A composite material consisting of Co{sub 2}C and Co{sub 3}C nanoparticles has been found to exhibit unusually large coercivity and energy product. Here, we demonstrate that the magnetic moments and the anisotropy can be further enhanced by using a combination of Co and other transition metals (TM). Our studies are based on mixed nanoparticles Co{sub 2−x}TM{sub x}C and Co{sub 3−x}TM{sub x}C, in which selected Co sites are replaced with 3d transition elements Cr, Mn, and Fe. The studies indicate that the replacement of Co by Fe results in an increase of both the magnetic moment and the magnetic anisotropy. In particular, CoFe{sub 2}C is shown to have an average spin moment of 2.56 μ{sub B} and a magnetic anisotropy of 0.353 meV/formula unit compared to 1.67 μ{sub B} and 0.206 meV/formula unit for the Co{sub 3}C. Detailed examination of the electronic structure shows that the limited hybridization of carbon p-states with transition metal d-states drives the larger anisotropy.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Electronic structure, magnetic properties, and magnetostructural transformations in rare earth dialuminides

We report electronic structure, magnetic properties, and magnetostructural transformations of selected rare earth dialuminides calculated by using local spin density approximation (LSDA), including the Hubbard U parameter (LSDA + U) approach. Total energy calculations show that CeAl{sub 2} and EuAl{sub 2} adopt antiferromagnetic (AFM) ground states, while dialuminides formed by other magnetic lanthanides have ferromagnetic (FM) ground states. The comparison of theoretical and experimental magnetic moments of CeAl{sub 2} indicates that the 4f orbital moment of Ce in CeAl{sub 2} is quenched. Theoretical calculations confirm that Eu in EuAl{sub 2} and Yb in YbAl{sub 2} are divalent. PrAl{sub 2} exhibits a tetragonal distortion near FM transition. HoAl{sub 2} shows a first order magnetostructural transition while DyAl{sub 2} shows a second order transformation below magnetic transition. The dialuminides formed by Nd, Tb, and Er are simple ferromagnets without additional anomalies in the FM state.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2014

Octupolar out-of-plane magnetic field structure generation during collisionless magnetic reconnection in a stressed X-point collapse

The out-of-plane magnetic field, generated by fast magnetic reconnection, during collisionless, stressed X-point collapse, was studied with a kinetic, 2.5D, fully electromagnetic, relativistic particle-in-cell numerical code, using both closed (flux conserving) and open boundary conditions on a square grid. It was discovered that the well known quadrupolar structure in the out-of-plane magnetic field gains four additional regions of opposite magnetic polarity, emerging near the corners of the simulation box, moving towards the X-point. The emerging, outer, magnetic field structure has opposite polarity to the inner quadrupolar structure, leading to an overall octupolar structure. Using Ampere's law and integrating electron and ion currents, defined at grid cells, over the simulation domain, contributions to the out-of-plane magnetic field from electron and ion currents were determined. The emerging regions of opposite magnetic polarity were shown to be the result of ion currents. Magnetic octupolar structure is found to be a signature of X-point collapse, rather than tearing mode, and factors relating to potential discoveries in experimental scenarios or space-craft observations are discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

The magnetic particle in a box: Analytic and micromagnetic analysis of probe-localized spin wave modes

The dipole field from a probe magnet can be used to localize a discrete spectrum of standing spin wave modes in a continuous ferromagnetic thin film without lithographic modification to the film. Obtaining the resonance field for a localized mode is not trivial due to the effect of the confined and inhomogeneous magnetization precession. We compare the results of micromagnetic and analytic methods to find the resonance field of localized modes in a ferromagnetic thin film, and investigate the accuracy of these methods by comparing with a numerical minimization technique that assumes Bessel function modes with pinned boundary conditions. We find that the micromagnetic technique, while computationally more intensive, reveals that the true magnetization profiles of localized modes are similar to Bessel functions with gradually decaying dynamic magnetization at the mode edges. We also find that an analytic solution, which is simple to implement and computationally much faster than other methods, accurately describes the resonance field of localized modes when exchange fields are negligible, and demonstrating the accessibility of localized mode analysis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2015

Demonstration of thermonuclear conditions in magnetized liner inertial fusion experiments

The magnetized liner inertial fusion concept [S. A. Slutz et al., Phys. Plasmas 17, 056303 (2010)] utilizes a magnetic field and laser heating to relax the pressure requirements of inertial confinement fusion. The first experiments to test the concept [M. R. Gomez et al., Phys. Rev. Lett. 113, 155003 (2014)] were conducted utilizing the 19 MA, 100 ns Z machine, the 2.5 kJ, 1 TW Z Beamlet laser, and the 10 T Applied B-field on Z system. Despite an estimated implosion velocity of only 70 km/s in these experiments, electron and ion temperatures at stagnation were as high as 3 keV, and thermonuclear deuterium-deuterium neutron yields up to 2 × 10{sup 12} have been produced. X-ray emission from the fuel at stagnation had widths ranging from 50 to 110 μm over a roughly 80% of the axial extent of the target (6–8 mm) and lasted approximately 2 ns. X-ray yields from these experiments are consistent with a stagnation density of the hot fuel equal to 0.2–0.4 g/cm{sup 3}. In these experiments, up to 5 × 10{sup 10} secondary deuterium-tritium neutrons were produced. Given that the areal density of the plasma was approximately 1–2 mg/cm{sup 2}, this indicates the stagnation plasma was significantly magnetized, which is consistent with the anisotropy observed in the deuterium-tritium neutron spectra. Control experiments where the laser and/or magnetic field were not utilized failed to produce stagnation temperatures greater than 1 keV and primary deuterium-deuterium yields greater than 10{sup 10}. An additional control experiment where the fuel contained a sufficient dopant fraction to substantially increase radiative losses also failed to produce a relevant stagnation temperature. The results of these experiments are consistent with a thermonuclear neutron source.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Radio frequency sheaths in an oblique magnetic field

The physics of radio-frequency (rf) sheaths near a conducting surface is studied for plasmas immersed in a magnetic field that makes an oblique angle θ with the surface. A set of one-dimensional equations is developed that describes the dynamics of the time-dependent magnetic presheath and non-neutral Debye sheath. The model employs Maxwell-Boltzmann electrons, and the magnetization and mobility of the ions is determined by the magnetic field strength, and wave frequency, respectively. The angle θ, assumed to be large enough to insure an electron-poor sheath, is otherwise arbitrary. Concentrating on the ion-cyclotron range of frequencies, the equations are solved numerically to obtain the rectified (dc) voltage, the rf voltage across the sheath, and the rf current flowing through the sheath. As an application of this model, the sheath voltage-current relation is used to obtain the rf sheath impedance, which in turn gives an rf sheath boundary condition for the electric field at the sheath-plasma interface that can be used in rf wave codes. In general, the impedance has both resistive and capacitive contributions, and generalizes previous sheath boundary condition models. The resistive part contributes to parasitic power dissipation at the wall.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Analysis of thermal demagnetization behavior of Nd–Fe–B sintered magnets using magnetic domain observation

We used magnetic domain observation to statistically observe the thermal demagnetization behavior of Nd–Fe–B sintered magnets at elevated temperatures up to 150 °C. Simultaneous magnetization reversal in a hundred adjacent grains occurred at 90 °C because of the magnetic interaction among the grains beyond grain boundaries in the Dysprosium (Dy)-free low-coercivity magnet. Conversely, simultaneous magnetization reversal in a hundred grains did not occur in the Dy-added high-coercivity magnets, and the demagnetizing ratio steadily increased with temperature. Furthermore, the addition of Dy induced high thermal stability by eliminating the simultaneous thermal demagnetization, which was caused by the magnetic interaction among the grains.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2016

Dynamical freezing, magnetic ordering, and the magnetocaloric effect in nanostructured Fe/Cu thin films

We report dynamical freezing of Fe nanocrystallites in a Cu matrix with magnetic ordering of an FeCu interfacial phase provides a unique window into the magnetocaloric effect. The FeCu alloy altered the Fe nanocrystallite surface atoms, and with a magnetic ordering temperature comparable to the dynamical freezing temperature of the nanocrystallites enabled Fe surface atoms to contribute to the overall magnetization. Tuning the amount of interfacial alloy resulted in the control of the magnetic ordering temperature and the magnetocaloric properties.

36 MATERIALS SCIENCE↗
DOE OSTI2016

Magnetization reversal in magnetic dot arrays: Nearest-neighbor interactions and global configurational anisotropy

Various proposals for future magnetic memories, data processing devices, and sensors rely on a precise control of the magnetization ground state and magnetization reversal process in periodically patterned media. In finite dot arrays, such control is hampered by the magnetostatic interactions between the nanomagnets, leading to the non-uniform magnetization state distributions throughout the sample while reversing. In this paper, we evidence how during reversal typical geometric arrangements of dots in an identical magnetization state appear that originate in the dominance of either Global Configurational Anisotropy or Nearest-Neighbor Magnetostatic interactions, which depends on the fields at which the magnetization reversal sets in. Based on our findings, we propose design rules to obtain the uniform magnetization state distributions throughout the array, and also suggest future research directions to achieve non-uniform state distributions of interest, e.g., when aiming at guiding spin wave edge-modes through dot arrays. Our insights are based on the Magneto-Optical Kerr Effect and Magnetic Force Microscopy measurements as well as the extensive micromagnetic simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗