Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Effect of Mn Concentration on the Structural, optical and Magnetic Properties of GaMnN

The room temperature magnetization of GaMnN films grown by molecular beam epitaxy on (0001) sapphire substrates with Mn concentrations varying from 0 to 9 at. % was found to depend on Mn concentration, with a maximum magnetization found at -3 at. % Mn. High-resolution x-ray diffraction measurements show that the c-plane lattice constant initially decreases with increasing Mn concentration, then increases when the Mn content increases above -3 at. %. This increase is accompanied by a decrease in the full width at half maximum of the rocking curves. Extended x-ray absorption fine structure results indicate that the nonsubstitutional Mn is not present in the form of Ga{sub x}Mn{sub y} clusters and thus is most likely present in the form of an interstitial. Optical absorption measurements show only a slight increase in the band gap for material with 3 at. % Mn, relative to undoped GaN.

36 MATERIALS SCIENCE↗

Effect of ball milling and dynamic compaction on magnetic properties of Al{sub 2}O{sub 3}/Co(P) composite particles

The evolution of the magnetic properties of composite Al{sub 2}O{sub 3}/Co(P) particles during ball milling and dynamic compaction is investigated. To prepare starting composite particles, the Al{sub 2}O{sub 3} granules were coated with a Co{sub 95}P{sub 5} shell by electroless plating. The magnetic and structural properties of the composite particles are characterized by scanning electron microscopy, X-ray diffraction, and the use of the Physical Property Measurement System. The use of composite core-shell particles as starting powder for mechanoactivation allows to decrease treatment duration to 1 h and to produce a more homogeneous bulk sample than in the case of the mixture of Co and Al{sub 2}O{sub 3} powders. The magnetic properties of the milled composite particles are correlated with changes in the microstructure. Reduction in grain size of Co during milling leads to an increase of the volume fraction of superparamagnetic particles and to a decrease of the saturation magnetization. The local magnetic anisotropy field depends on the amount of hcp-Co phase in sample. The anisotropy field value decreases from 8.4 kOe to 3.8 kOe with an increase in milling duration up to 75 min. The regimes of dynamic compaction were selected so that the magnetic characteristics—saturation magnetization and coercive field—remained unchanged.

36 MATERIALS SCIENCE↗

Structural and magnetic properties of L1(0)/A1, FePt nanocomposites

In this work structural and magnetic properties of (L1(0)-FePt/A1-FePt) exchange coupled nanocomposites are presented. Semi spherical "dome-like" nanocomposites with L1(0) FePt isolated nanoparticles and A1 FePt (fcc) cap layers were obtained by depositing A1-FePt on type L1(0) FePt nanoparticles in order to understand the influence of the soft magnetic layer thickness on the magnetic properties of the system. Epitaxial growth is confirmed by X-ray diffraction and TEM, while the coercivity decreases dramatically for the L1(0)/A1-FePt system when the thickness of the A1-FePt cap layers is increased. This result can be used to realize ultrahigh magnetic recording media with tunable coercivity, suitable for conventional write heads. (C) 2012 Elsevier B.V. All rights reserved.

Giannopoulos, G↗

Magnetic properties of FeZr{sub 2} and Fe{sub 2}Zr intermetallic compounds

Magnetic properties of Fe-Zr system, viz., FeZr{sub 2} and Fe{sub 2}Zr have been studied. Both the compounds show soft ferromagnetic behavior. Curie temperature is well above the room temperature. Lower saturation magnetization for the zirconium rich sample, FeZr{sub 2}, could be due to possible donation of electrons from the Zr-rich neighbors to Fe atoms or diminution of long range magnetic order by defects.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of the Structure and Magnetic Properties of Cobalt-Doped Ferrihydrite Nanoparticles Under Heat Treatment

Nanoparticles of antiferromagnetic materials acquire the magnetic moment due to the surface effects and structural defects. According to the Neel hypothesis, magnetic moment μ{sub P} of a particle containing N magnetically active atoms with magnetic moment J can be estimated as μ{sub P} ∼ J · N{sup n} or μ{sub P} ∼ V{sup n}, where V is the particle volume. Numerous studies of the magnetic properties of ferrihydrite 5Fe{sub 2}O{sub 3}⋅9H{sub 2}O and ferritin revealed a value of n ≈ 1/2 for this material, in which Fe atoms have the octahedral surrounding of anions. We investigate the effect of low-temperature annealing of cobalt-doped ferrihydrite nanoparticles on their average size and magnetic properties. Using the Mössbauer spectroscopy study, we demonstrate that doping with Co makes Fe atoms enter the anion tetrahedra which leads to an increase in the exponent n〉1/2 in the expression μ{sub P} ∼ J · N{sup n}.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exploring the structural and magnetic properties of TiO{sub 2}/SnO{sub 2} core/shell nanocomposite: An experimental and density functional study

TiO{sub 2}/SnO{sub 2} core/shell nanocomposite is prepared via a simple sol–gel method and the properties are compared with the individual TiO{sub 2} (core) and SnO{sub 2} (shell). The corresponding characterizations are carried out in terms of structural and magnetic properties of TiO{sub 2}/SnO{sub 2}, TiO{sub 2} and SnO{sub 2} nanosystems. Structural properties are studied via XRD, TEM, Raman spectroscopy, FTIR and XPS. Magnetic characterization is performed by measuring Moment vs. Applied Field for all the samples and Moment vs. Temperature for TiO{sub 2}/SnO{sub 2} core/shell nanocomposite. We also went for a better insight with the help of theoretical measures. First principle calculations have been executed using “Density Functional Theory” (DFT)-based MedeA VASP package to compare the results of TiO{sub 2}/SnO{sub 2} with TiO{sub 2} (1 1 0) and SnO{sub 2} (1 1 0) surface calculations and its effect on the magnetic nature of the specific nanoparticles. XRD, RAMAN and FTIR gave indirect evidence of formation of core shell nanostructure while TEM micrographs provide the direct evidence of formation of core shell nanostructure. The magnetic study shows a higher saturation magnetization for the core/shell nanostructure compared to pristine TiO{sub 2} and SnO{sub 2}. In this report, we have attempted to relate this experimental observation with the results of the first principle calculations. - Graphical abstract: Above pictorial presentation (from left) represents the model for TS, TiO{sub 2} and SnO{sub 2} used for DFT calculation and the obtained magnetic results for all the prepared systems. - Highlights: • Synthesis of TiO{sub 2}/SnO{sub 2} core/shell nanocomposites by a simple sol–gel technique. • The nanocomposites show better magnetic property than pristine nanoparticles. • DFT based calculations also support the experimental evidences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of Cr doping on structural and magnetic properties of ZnS nanoparticles

The structural, optical and magnetic properties of pure and Cr doped ZnS nanoparticles were studied at room temperature. X-ray diffraction analysis confirmed the absence of any mixed phase and the cubic structure of ZnS in pure and Cr doped ZnS nanoparticles. Fourier transfer infrared spectra confirmed the Zn-S stretching bond at 664 cm{sup −1} of ZnS in all prepared nanoparticles. The UV-Visible absorption spectra showed blue shift which became even more pronounced in Cr doped ZnS nanoparticles. However, at relatively higher Cr concentrations a slower red shift was shown by the doped nanoparticles. This phenomenon is attributed to sp-d exchange interaction that becomes prevalent at higher doping concentrations. Further, magnetic hysteresis measurements showed that Cr doped ZnS nanoparticles exhibited ferromagnetic behavior at room temperature.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic Properties of Eu{sub 0.9}Yb{sub 0.1}B{sub 6}

The magnetic properties of substitutional solid solutions Eu{sub 0.9}Yb{sub 0.1}B{sub 6} have been investigated in the temperature range of 2–300 K in fields up to 5 T. The data obtained confirm that the state with the electronic and magnetic phase separation (typical of europium hexaboride) is implemented in Eu{sub 0.9}Yb{sub 0.1}B{sub 6} when the system metallization (T{sub M} ≈ 15 K) precedes the ferromagnetic ordering (T{sub C} ≈ 11.4 K). An analysis of the curves M(H) in the Belov–Arrott coordinates makes it possible to evaluate spontaneous magnetization M{sub sp} and zero field susceptibility χ{sub 0} and determine the character of their critical behavior near the Curie point. The calculated critical indices (γ ≈ 1.28 and β ≈ 0.34) are in agreement with the predictions of the three-dimensional Heisenberg model.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Size dependent structural and magnetic properties of Al substituted Co–Mg ferrites synthesized by the sol–gel auto-combustion method

Highlights: • Well-crystalline Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} nanoparticles with small grain size were obtained. • The approach is sol–gel auto-combustion technique for obtained nanoparticles. • The prepared Co{sub 0.7}Mg{sub 0.3}AlFeO{sub 4} ferrites are decent soft materials with low coercivity. • The minor decrease in lattice parameter with increase of temperature was observed. - Abstract: Single phased nanocrystalline Co{sub 0.7}Mg{sub 0.3}FeAlO{sub 4} ferrites having low coercivity were synthesized by the sol–gel auto-combustion route. The subsequent powder materials were sintered in a temperature range of 800–1200 °C for 2 h. The effects of sintering temperatures on the structure, morphology and magnetic properties of the prepared soft magnetic material were studied. X-ray diffractometer (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), and magnetic property measurement system (MPMS) were used to characterize the samples. X-ray diffraction analysis confirmed a single-phase cubic spinel structure and ruled out the presence of impurities like hematite. The higher sintering temperatures have caused in enhanced mark of crystallinity and bigger average grain size of the nanocrystals. A slight decrease in lattice parameters was noticed with a rise of grain size. Magnetic measurements revealed that grain size increase led to a decrease in the coercivity and, in difference, an increase in the saturation magnetization.

36 MATERIALS SCIENCE↗

Magnetic properties of Mn{sub 1.9}Cu{sub 0.1}Sb under high pressure

Magnetization measurements were carried out for polycrystalline Mn{sub 1.9}Cu{sub 0.1}Sb in magnetic fields up to 5 T in the 10-300 K temperature range under high pressures up to 1 GPa in order to investigate the magnetic properties and the thermal transformation arrest (TTA) phenomenon under high pressures. The spin-reorientation temperature increased from 202 K for 0.1 MPa to 244 K for 1 GPa, whereas the transition temperature from the ferrimagnetic (FRI) to antiferromagnetic (AFM) state did not drastically change at ∼116 K. The magnetic relaxation behavior from the FRI to AFM state was observed in 10 < T ≤ 70 K, which was analyzed using the Kohlrausch-Williams-Watts model. Obtained results indicated that the TTA phenomenon of Mn{sub 1.9}Cu{sub 0.1}Sb was suppressed by the application of high pressures.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of the Fe/Ba Ratio and Sintering Temperature on Microstructure and Magnetic Properties of Barium Ferrites Prepared by Hydrothermal Method

Magnetoplumbite-type (M-type) hexagonal barium ferrite particles were synthesized by a hydrothermal method. The structure and magnetic properties of barium ferrites were investigated systematically, which indicated that the ratio of Fe/Ba (R{sub F/B}) and sintering temperature have an important effect on structure and performance. Phase composition, micro-morphology, and magnetic properties of the particles were investigated by X-ray powder diffraction (XRD) analysis, scanning electron microscopy (SEM), and vibrating sample magnetometry (VSM). When the ratio of Fe/Ba (R{sub F/B}) is even low or high, inferior images of XRD could be attained with certain impurities. When R{sub F/B} = 8, the single phase could be obtained without impurities. Micro-morphology of the particles exhibits the uniform plane hexagonal structures of nano-sized M-type ferrites when sintered at 800 °C. Saturation magnetization (M{sub s}) reaches the maximum value at R{sub F/B} = 7 (M{sub s} = 45.07 emu/g). The value of coercivity (H{sub c}) increases with the growth of R{sub F/B}, and H{sub c} is up to 6207 Oe when R{sub F/B} = 7. The effect of R{sub F/B} and temperature on magnetization (M{sub s}) and coercivity (H{sub c}) was studied in this paper.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of structural defects on the magnetic properties of the EuBaCo{sub 1.90}O{sub 5.36} single crystal

The effect of structural defects in cobalt and oxygen sublattices with the constant average oxidation level 3+ of all cobalt ions on the magnetic properties of the EuBaCo{sub 1.90}O{sub 5.36} single crystal has been studied. The magnetic properties of the single crystal and the polycrystalline sample of the corresponding composition are compared in the range T = 200–650 K. The results show that the cobalt-deficient EuBaCo{sub 2–x}O{sub 5.5–δ} samples demonstrate a three-dimensional XY ferromagnetic ordering of magnetic sublattices. The values of the effective magnetic moment at T > 480 K indicate the existence of the IS and HS states of Co{sup 3+} ions. The large difference of values of μ{sub eff} of the EuBaCo{sub 1.90}O{sub 5.36} single crystal and polycrystal can be due to that the magnetic ion spins lie in plane ab. The magnetic field directed along plane ab substantially influences the magnetic ordering at T < 300 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Ab Initio Investigation of Structural Stability and Electronic and Magnetic Properties of the Half-Heusler Alloys: MTiSb (M = Fe, Co, and Ni)

The structural, electronic, and magnetic properties of the half-Heusler MTiSb (M = Fe, Co, Ni) compounds have been examined using the first-principles calculations with the full-potential linear augmented plane wave (FP-LAPW) method within the density functional theory. The electronic structures and magnetic properties of MTiSb (M = Fe, Co, Ni) are studied. It is found that the calculated lattice parameter is in good agreement with the theoretical values. Using the general gradient approximation (GGA), we observe that for the three compounds, the α phase is more stable than β and γ phases. CoTiSb is a semiconductor, NiTiSb is a metal, while the FeTiSb compound is a half-metallic, and the total magnetic moments are 0.00085, − 0.26074, and 0.99353 μ B, respectively, which is in agreement with the Slater–Pauling rule, Furthermore, the origin for the appearance of the half-metallic band gap in the FeTiSb compound was also discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, structure and magnetic properties of La{sub 3}Co{sub 2}SbO{sub 9}: A double perovskite with competing antiferromagnetic and ferromagnetic interactions

The synthesis, structural characterization, and magnetic properties of La{sub 3}Co{sub 2}SbO{sub 9} double perovskite are reported. The crystal structure has been refined by X-ray and neutron powder diffraction data in the monoclinic space group P2{sub 1}/n. Co{sup 2+} and Sb{sup 5+} have the maximum order allowed for the La{sub 3}Co{sub 2}SbO{sub 9} stoichiometry. Rietveld refinements of powder neutron diffraction data show that at room temperature the cell parameters are a=5.6274(2) A, b=5.6842(2) A, c=7.9748(2) A and {beta}=89.999(3) Degree-Sign . Magnetization measurements indicate the presence of ferromagnetic correlations with T{sub C}=55 K attributed to the exchange interactions for non-linear Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} paths. The effective magnetic moment obtained experimentally is {mu}{sub exp}=4.38 {mu}{sub B} (per mol Co{sup 2+}), between the theoretical one for spin only (3.87 {mu}{sub B}) and spin-orbit value (6.63 {mu}{sub B}), indicating partially unquenched contribution. The low magnetization value at high magnetic field and low temperature (1 {mu}{sub B}/f.u., 5 T and 5 K) and the difference between ZFC and FC magnetization curves (at 5 kOe) indicate that the ferromagnetism do not reach a long range order and that the material has an important magnetic frustration. - Graphical abstract: Co-O-Co (Yellow octahedra only) rich zones (antiferromagnetic) are in contact with Co-O-Sb-O-Co (Red and yellow octahedra) rich zones (Ferromagnetic) to give the peculiar magnetic properties, as a consequence, a complex hysteresis loop can be observed composed by a main and irreversible curve in all the measured range, superimposed with a ferromagnetic component at low fields. Highlights: Black-Right-Pointing-Pointer La{sub 3}Co{sub 2}SbO{sub 9} has small Goldschmidt Tolerance Factor (t) due to the small size of La{sup 3+}. Black-Right-Pointing-Pointer Small t determines an angle for the path Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} of 153 Degree-Sign . Black-Right-Pointing-Pointer Ferromagnetism is attributed to exchange interactions for Co{sup 2+}-O-Sb{sup 5+}-O-Co{sup 2+} paths. Black-Right-Pointing-Pointer Ferromagnetic nanoclusters are embedded in an antiferromagnetic matrix.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of Interface Induced Natural Strains on Magnetic Properties of FeRh

FeRh is a unique alloy which shows temperature dependent phase transition magnetic properties. The lattice parameter (a) of this CsCl-type (B2) structure is 4.1712 Å. It undergoes a first order transition from antiferromagnetic (AFM) to ferromagnetic (FM) order at around 370K and hysteretic behavior while cooling and heating. This meta-magnetic transition of FeRh is accompanied by an isotropic expansion in the unit cell volume, which indicates strong coupling between magnetic and structural properties of FeRh. Consequently, the magnetic and transport properties, such as magnetoresistance (MR), are changed during the transition. Due to its unique thermo-magnetic behaviors, FeRh is very important for future spintronic devices. The structure could be applicable for MR devices such as memory, sensors, and many other applications. It is critical to understand how to systematically influence phase transition of FeRh from naturally applied strains. Here, we investigate magnetic properties of FeRh in different strain environments induced by the substrates with different lattice parameters. The study was performed using synchrotron radiation, temperature dependent magnetometry, and magnetic scanning probe microscopy in addition to Landau theory calculations. We found that the naturally induced strains could modulate the magnetic phase locally and globally. The presence of the segments from the nucleation of the ferromagnetic domains, with a very thin layer in the antiferromagnetic matrix and the domain growth, were observed gradually. Using the systematic phenomena, it could be used for immediate applications in the future generation of phase change random access memory (PC-RAM) devices.

36 MATERIALS SCIENCE↗

Effects of Microwave-Assisted Annealing on the Structure and Magnetic Properties of (Nd{sub 0.75}Pr{sub 0.25}){sub 9}Fe{sub 72}Ti{sub 1}Zr{sub 3}Mn{sub x} Mo{sub 4−x}B{sub 10.5}C{sub 0.5} Amorphous Ribbons

The amorphous as-spun ribbons with nominal composition (Nd{sub 0.75}Pr{sub 0.25}){sub 9}Fe{sub 72}Ti{sub 1}Zr{sub 3}Mn{sub x}Mo{sub 4−x}B{sub 10.5}C{sub 0.5}(x = 1, 2, 3) were annealed by microwave-assisted annealing. The effects of the Mn-doped alloys on glass-forming ability (GFA), crystallization, and magnetic properties of the Nd{sub 2}Fe{sub 14}B/α-Fe nanocomposite magnets were examined by thermal differential scanning calorimetry (DSC), X-ray diffraction (XRD), and vibrating sample magnetometry (VSM). An appropriate amount of Mn was beneficial to the optimization of the structure and magnetic properties. Compared with conventional annealing, the microwave-assisted annealing has contributed to the precipitation of hard magnetic phases and adjusted the proportion of hard and soft magnetic phases. The optimum magnetic properties with coercivity up to 805 kA/m were found for ribbons (with composition x = 1) annealed under the microwave power of 2000 W for 10 min.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ti on structure and soft magnetic properties of Si-rich Finemet-type nanocrystalline Fe73.5Cu1Nb3-xSi17.5B5Tix alloys

Highlights: • Substitution of Nb by Ti can reduce the T{sub x1} and enlarge the ΔT{sub x}. • Fe{sub 73.5}Cu{sub 1}Nb{sub 2}Si{sub 17.5}B{sub 5}Ti{sub 1} alloy exhibits high μ{sub i} of 18,000 and low H{sub c} of 0.54 Oe. • Magnetic properties were analysed in terms of the relationship between H{sub c} and μ{sub i}. • Soft magnetic properties will deteriorate when Nb is completely replaced by Ti. • The reasons of variation of permeability at high temperature were analyzed. - Abstract: Fe{sub 73.5}Cu{sub 1}Nb{sub 3-x}Si{sub 17.5}B{sub 5}Ti{sub x} (x = 0, 1, 2, 3) amorphous alloys were prepared by the single roller melt spinning method. The effects of Ti substitution for Nb on the crystallization behavior, microstructure and soft magnetic properties were investigated. Compared to the previously reported Finemet alloy, the onset primary crystallization temperature T{sub x1} becomes lower which has dropped from 803K to 758K. The crystallization temperature interval ΔT{sub x} increases from 468K to 488K as the x increases from 0 to 3. However, the Curie temperature of amorphous phase shows a downward tendency with the increase of Ti content. Compared to the previously reported Finemet alloy, the μ{sub i} increases obviously to more than 18,000 at x = 1, the H{sub c} decreases from 0.59 Oe to 0.54 Oe. When Ti replaces Nb completely, the optimum annealing temperature range for precipitating single soft magnetic phase is enlarged, but the permeability at room- and high-temperature is deteriorated, the reason of which was also analysed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Investigation of Microstructural and Magnetic Properties of BaV{sub x}Fe{sub 12−x}O{sub 19} Nanohexaferrites

Nanohexaferrites of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) were prepared using sol–gel auto-combustion. The structure and morphology of BaV{sub x}Fe{sub 12−x}O{sub 19} (0.0 ≤ x ≤ 0.1) nano-sized hexaferrites were explored by X-ray diffraction (XRD), scanning electron microscopy (SEM) coupled with EDXS. XRD analysis indicated particle size in the 55–60-nm interval. SEM and EDXS investigations confirmed the formation of the desired composition of V-substituted Ba-hexaferrites. The magnetic properties of products were studied. The magnetic M(H) hysteresis loops revealed that all produced nanohexaferrites display ferromagnetic-like comportment. The deduced saturation magnetization (M{sub s}), retentivity (M{sub r}), magneto-crystalline anisotropy fields (H{sub a}), and coercive field (H{sub c}) were enhanced for low V{sup 3+} contents and were maximum for BaV{sub 0.04}Fe{sub 11.96}O{sub 19} (x = 0.04) nanohexaferrites, showing the strengthening of magnetic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗