Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Liquid interfaces”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Combined Gravity Gradient and Jitter Accelerations Acting on Liquid-Vapor Interface Oscillations in Reduced Gravity

The dynamical behavior of fluids affected by the asymmetric combined gravity gradient and jitter accelerations, in particular the effect of surface tension on partially-filled rotating fluids applicable to a full-scale Gravity Probe-B Spacecraft dewar tank, have been investigated. Three different cases of accelerations, one gravity gradient-dominated, one equally weighted between gravity gradient and jitter, and the others gravity jitter-dominated are studied. Results of slosh wave excitation along the liquid-vapor interface induced by gravity gradient-dominated acceleration indicate that the gravity gradient-dominated acceleration is equivalent to the combined effect of a twisting force and torsional moment acting on the spacecraft. Results of the slosh wave excitation along the liquid vapor interface induced by gravity jitter-dominated acceleration indicate that the gravity jitter-dominated acceleration is equivalent to time-dependent oscillatory forces which push the bubble in the combined directions of down-and-up and sideward -and-middleward as the bubble is rotating with respect to rotating dewar axis. This study discloses the slosh wave excitation along the liquid-vapor interface driven by the combined effects of gravity gradient and jitter accelerations which are two major driving forces affecting the stability of the fluid system in microgravity.

Hung, R. J.↗

Interferometric enhancement of x-ray reflectivity from unperturbed Langmuir monolayers of amphiphiles at the liquid-gas interface

Langmuir monolayers provide an important system for the investigation of the intramolecular structure and intermolecular ordering of organic and bio-organic macromolecular amphiphiles at an interface between polar and nonpolar media, e.g., the liquid-gas interface. Specular x-ray and neutron reflectivity have contributed substantially to these investigations. However, these reflectivity techniques are generally limited by the absence of crucial phase information, the relatively small contribution of the amphiphile to the scattering-length density contrast across the interface, and the relatively limited range of momentum transfer available perpendicular to the interface. Although several procedures have been developed to provide model-independent solutions to the phase problem, there remains a limited ability to distinguish features of slightly differing contrast (i.e., the "sensitivity") as well as their minimum allowable separation (i.e., the "spatial resolution") along the length of the scattering-length density profile derived from the reflectivity data via solution to the phase problem. Here, we demonstrate how the well-known interferometric approach can be extended to the structural investigation of otherwise unperturbed Langmuir monolayers of these amphiphiles to provide a direct solution to the phase problem and importantly, substantially enhance both the sensitivity and the spatial resolution in the derived profiles.

36 MATERIALS SCIENCE↗

Effect of asymmetric gravity jitter excited slosh waves at liquid-vapor interface under microgravity

The dynamical behavior of fluids affected by the asymmetric gravity jitter oscillations, in particular the effect of surface tension on partially-filled rotating fluids (cryogenic liquid helium and helium vapor) in a sub-scale Gravity Probe-B Spacecraft propellant dewar tank imposed by time-dependent various directions of background gravity environment have been investigated. Results show that lower frequency gravity jitter imposed on the time-dependent variations of the direction of background gravity induced a greater amplitude of oscillations and a stronger degree of asymmetry in liquid-vapor interface geometry than that made by the higher frequency gravity jitter. Furthermore, the greater the components of background gravity in radial and circumferential directions will provide a greater contribution in driving more to the increasing amplitude and degrees of symmetry of liquid-vapor interface profiles which, in turn, modify the disturbance of moment of inertia and angular momentum of spacecraft.

Hung, R. J.↗

Validation of Cryogenic Propellant Tank Self-Pressurization by Leveraging Reduced Order Modeling within Computational Fluid Dynamics Simulation

Validation of cryogenic propellant tank self-pressurization was performed using a hybrid Computational Fluid Dynamics (CFD) and reduced order modeling methodology. Data from a liquid hydrogen ground test conducted at the K-site facility at the National Aeronautics and Space Administration (NASA) Glenn Research Center was used for the validation effort. Liquid phase dynamics were explicitly resolved with a CFD tool. Vapor phase dynamics were modeled as a point mass that communicated heat from the tank wall to the liquid phase via a boundary condition used at the gas-liquid interface. The method proved to be more accurate, robust, and efficient than explicit resolution of the dynamics using a standard Volume of Fluid (VOF) methodology. The subject pressurization process was found to be heavily dependent upon both the relatively high liquid temperature gradient near the gas-liquid interface and the natural convection flow path. Modeling the gas-liquid interface as an immovable surface eliminated temperature gradient destroying gas-liquid interface velocities observed in VOF simulations, and correspondingly enabled more rapid simulation since interface advection was not allowed. The single phase computational domain also facilitated the ability to demonstrate spatial resolution convergence of natural convection cells within the liquid which significantly impacted the tank pressurization rate. This work was used to demonstrate the critical physics for tank self-pressurization and numerical methodologies that may be used to best resolve those physics. The findings informed development and operation of production level CFD tools used in the Fluid Dynamics Branch at NASA Marshall Space Flight Center.

J. M. Brodnick↗

Lattice-scale variations in viscosity are correlated with solution structure at mineral-water interfaces

At solid-liquid interfaces, the viscosity increases markedly from the bulk due to the collective interactions of ions and water molecules, influencing phenomena relevant to nanofluidics, colloidal dynamics, and electrochemistry. Here, in this study, we investigated dissipative forces at the boehmite-water interface using 3D atomic force microscopy. We observed an increase in interfacial solution viscosity, η, by 10-100-fold as the nanoprobe approached the surface in normal direction, with up to four oscillatory features showing average peaks of η/η bulk = 44-71. Moreover, the viscosity showed sub-nanometer variations within 0.5 nm from the interface, templated by the underlying crystal lattice and correlated with the interfacial solution structure. Beyond a near-wall region of approximately 1.2 nm, the dissipative response was comparable to that in bulk solution. Molecular dynamics simulations, along with statistical mechanical analyses, provided details on hydrodynamic structures near the interface. Specifically, the lattice-dependent dissipative responses are correlated with extensive hydrogen bonding by interfacial water molecules, which increased friction, particularly along the [001] direction. These results demonstrate how solution viscosity at mineral-water interfaces is anisotropic and correlated with the local solution structure, providing insights into the dynamics of nanocrystal attachment.

Viscosity↗

Phase transitions in the liquid-vapor interface of dilute alloys of Bi in Ga: New experimental studies

We report the results of measurements of x-ray reflectivity and grazing incidence x-ray diffraction from the liquid-vapor interfaces of four dilute alloys of Bi in Ga with mole fractions x{sub Bi} = 0.0032, 0.0023, 0.00037, and 0.000037. The monolayer coverage of the alloys with x{sub Bi} = 0.0023, and x{sub Bi} = 0.00037 is about 0.85 and only very slightly temperature dependent. The monolayer coverage in the lowest-concentration alloy, with x{sub Bi} = 0.000037, ranged from 0.82 at 29 C to 0.58 at 110 C. In none of these alloys, down to the lowest temperature used, 29 C, can we find any evidence for crystallization of the Bi monolayer that segregates as the outermost stratum of the liquid-vapor interface. Drawing on theoretical arguments we propose that the transitions inferred from the second-harmonic generation and plasma generation studies of dilute Bi in Ga alloys are from the liquid state to the hexatic state of the Bi monolayer. The data for the alloy with x{sub Bi} = 0.000037 suggest that near 80 C there is a disordered phase-to-disordered phase transition.

36 MATERIALS SCIENCE↗

Observation and Control of Unidirectional Ballistic Dynamics of Nanoparticles at a Liquid–Gas Interface by 4D Electron Microscopy

Understanding and controlling the dynamics of active Brownian objects far from equilibrium are fundamentally important for emerging technologies such as artificial micro/nanomotors for drug deliveries and noninvasive microsurgery. However, direct observation and control of unidirectional propulsion of individual nanoscale objects are technically challenging due to the required spatiotemporal resolution. Here, we report in situ visualization and manipulation of unidirectional superfast ballistic dynamics of a single-photon-activated gold nanoparticle (NP) along the liquid–gas interface by four-dimensional electron microscopy (4D EM) at nanometer and nanosecond scales. We observed that, upon repetitive femtosecond laser excitation, the NP at the liquid–gas interface exhibits a continuously superfast unidirectional translation with a linear dependence of its root mean squared velocity (νrms) on either the laser fluence or repetition rate. Under a single femtosecond pulse excitation, the NP exhibits a superfast ballistic translation at the nanosecond time scale. Combined experiment and physical modeling reveals that the superfast unidirectional, ballistic translation is driven by unidirectional random impulsive forces arising from the nanobubbles (NBs) induced by enhanced laser heating as a result of plasmonic excitation, which is controllable by tuning the laser characteristics. Furthermore, this directional plasmonic NB-propulsion mechanism sheds light on the design of light-controllable artificially intelligent micro/nanomotor systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of the Physical Properties of Liquids and Diameter of Bubble on the Formation of Liquid Column at the Interface of Two Liquid Phases by the Rising Bubble

The formation of metal emulsion in a steel-making process enhances the reaction between metal and slag. A part of the metal emulsion is formed by a bubble passing through the interface between the metal and slag phases. In a previous study, it was determined that the formation of metal column by the bubble is related to the formation of metal droplets. In this research, the effects of bubble particle size, interfacial tension, viscosity of upper layer, and lower layer density on the formation of lower liquid column were investigated. In order to conduct an in situ observation of gas and liquid behaviors, aqueous solution and silicon oil systems were employed. It was determined that a narrow and elongated column forms liquid droplets in the upper liquid layer and contributes to the formation of droplets. The height of the column and the volume of droplets increase with the increase in bubble size. The influence of interfacial tension of the two liquid phases on the column height and the formation of droplet is slight. The height of the formed column decreases with the increase in the density of lower liquid.

36 MATERIALS SCIENCE↗

Surface potential of the water liquid-vapor interface

An analysis of an extended molecular dynamics calculation of the surface potential (SP) of the water liquid-vapor interface is presented. The SP predicted by the TIP4P model is -(130 + or - 50) mV. This value is of reasonable magnitude but of opposite sign to the expectations based on laboratory experiments. The electrostatic potential shows a nonmonotonic variation with depth into the liquid.

Wilson, Michael A.↗

Adsorption and solvation of ethanol at the water liquid-vapor interface: a molecular dynamics study

The free energy profiles of methanol and ethanol at the water liquid-vapor interface at 310K were calculated using molecular dynamics computer simulations. Both alcohols exhibit a pronounced free energy minimum at the interface and, therefore, have positive adsorption at this interface. The surface excess was computed from the Gibbs adsorption isotherm and was found to be in good agreement with experimental results. Neither compound exhibits a free energy barrier between the bulk and the surface adsorbed state. Scattering calculations of ethanol molecules from a gas phase thermal distribution indicate that the mass accommodation coefficient is 0.98, and the molecules become thermalized within 10 ps of striking the interface. It was determined that the formation of the solvation structure around the ethanol molecule at the interface is not the rate-determining step in its uptake into water droplets. The motion of an ethanol molecule in a water lamella was followed for 30 ns. The time evolution of the probability distribution of finding an ethanol molecule that was initially located at the interface is very well described by the diffusion equation on the free energy surface.

NASA Discipline Exobiology↗

Dynamic air/liquid pockets for guiding microscale flow

Microscale flows of fluids are mainly guided either by solid matrices or by liquid–liquid interfaces. Yet, the solid matrices are plagued with persistent fouling problems, while liquid–liquid interfaces are limited to low-pressure applications. Here we report a dynamic liquid/solid/gas material containing both air and liquid pockets, which are formed by partially infiltrating a porous matrix with a functional liquid. Using detailed theoretical and experimental data, we show that the distribution of the air- and liquid-filled pores is responsive to pressure and enables the formation and instantaneous recovery of stable liquid–liquid interfaces that sustain a wide range of pressures and prevent channel contamination. This adaptive design is demonstrated for polymeric materials and extended to metal-based systems that can achieve unmatched mechanical and thermal stability. Our platform with its unique adaptive pressure and antifouling capabilities may offer potential solutions to flow control in microfluidics, medical devices, microscale synthesis, and biological assays.

42 ENGINEERING↗

Liquid-Air Interface Corrosion Studies at SRS

Philip Zapp of Savannah River Site (SRS) details corrosion studies done at the facility's waste tanks with an emphasis on pitting and the liquid-air interface.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗