Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Laminarization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

User's guide for the computer code COLTS for calculating the coupled laminar and turbulent flow over a Jovian entry probe

A user's guide for a computer code 'COLTS' (Coupled Laminar and Turbulent Solutions) is provided which calculates the laminar and turbulent hypersonic flows with radiation and coupled ablation injection past a Jovian entry probe. Time-dependent viscous-shock-layer equations are used to describe the flow field. These equations are solved by an explicit, two-step, time-asymptotic finite-difference method. Eddy viscosity in the turbulent flow is approximated by a two-layer model. In all, 19 chemical species are used to describe the injection of carbon-phenolic ablator in the hydrogen-helium gas mixture. The equilibrium composition of the mixture is determined by a free-energy minimization technique. A detailed frequency dependence of the absorption coefficient for various species is considered to obtain the radiative flux. The code is written for a CDC-CYBER-203 computer and is capable of providing solutions for ablated probe shapes also.

Kumar, A.↗
NASA NTRS1982

Analysis of an existing experiment on the interaction of acoustic waves with a laminar boundary layer

The hot-wire anemometer amplitude data contained in the 1977 report of P. J. Shapiro entitled, ""The Influence of Sound Upon Laminar Boundary'' were reevaluated. Because the low-Reynolds number boundary layer disturbance data were misinterpreted, an effort was made to improve the corresponding disturbance growth rate curves. The data are modeled as the sum of upstream and downstream propagating acoustic waves and a wave representing the Tollmien-Schlichting (TS) wave. The amplitude and phase velocity of the latter wave were then adjusted so that the total signal reasonably matched the amplitude and phase angle hot-wire data along the plate laminar boundary layer. The revised rates show growth occurring further upstream than Shapiro found. It appears that the premature growth is due to the adverse pressure gradient created by the shape of the plate. Basic elements of sound propagation in ducts and the experimental and theoretical acoustic-stability literature are reviewed.

Schopper, M. R.↗
NASA NTRS1982

Computer program for solving laminar, transitional, or turbulent compressible boundary-layer equations for two-dimensional and axisymmetric flow

A numerical algorithm and computer program are presented for solving the laminar, transitional, or turbulent two dimensional or axisymmetric compressible boundary-layer equations for perfect-gas flows. The governing equations are solved by an iterative three-point implicit finite-difference procedure. The software, program VGBLP, is a modification of the approach presented in NASA TR R-368 and NASA TM X-2458, respectively. The major modifications are: (1) replacement of the fourth-order Runge-Kutta integration technique with a finite-difference procedure for numerically solving the equations required to initiate the parabolic marching procedure; (2) introduction of the Blottner variable-grid scheme; (3) implementation of an iteration scheme allowing the coupled system of equations to be converged to a specified accuracy level; and (4) inclusion of an iteration scheme for variable-entropy calculations. These modifications to the approach presented in NASA TR R-368 and NASA TM X-2458 yield a software package with high computational efficiency and flexibility. Turbulence-closure options include either two-layer eddy-viscosity or mixing-length models. Eddy conductivity is modeled as a function of eddy viscosity through a static turbulent Prandtl number formulation. Several options are provided for specifying the static turbulent Prandtl number. The transitional boundary layer is treated through a streamwise intermittency function which modifies the turbulence-closure model. This model is based on the probability distribution of turbulent spots and ranges from zero to unity for laminar and turbulent flow, respectively. Several test cases are presented as guides for potential users of the software.

Harris, J. E.↗
NASA NTRS1984

Engineering correlations of variable-property effects on laminar forced convection mass transfer for dilute vapor species and small particles in air

A simple engineering correlation scheme is developed to predict the variable property effects on dilute species laminar forced convection mass transfer applicable to all vapor molecules or Brownian diffusing small particle, covering the surface to mainstream temperature ratio of 0.25 T sub W/T sub e 4. The accuracy of the correlation is checked against rigorous numerical forced convection laminar boundary layer calculations of flat plate and stagnation point flows of air containing trace species of Na, NaCl, NaOH, Na2SO4, K, KCl, KOH, or K2SO4 vapor species or their clusters. For the cases reported here the correlation had an average absolute error of only 1 percent (maximum 13 percent) as compared to an average absolute error of 18 percent (maximum 54 percent) one would have made by using the constant-property results.

Gokoglu, S. A.↗
NASA NTRS1984

A preliminary design study on an acoustic muffler for the laminar flow transition research apparatus

An acoustic muffler design of a research tool for studying laminar flow and the mechanisms of transition, the Laminar Flow and Transition Research Apparatus (LFTRA) is investigated. Since the presence of acoustic pressure fluctuations is known to affect transition, low background noise levels in the test section of the LFTRA are mandatory. The difficulties and tradeoffs of various muffler design concepts are discussed and the most promising candidates are emphasized.

Abrahamson, A. L.↗
NASA NTRS1983

A study of non-unique solutions of the two-dimensional boundary layer equations at laminar separation and reattachment points

Nonunique laminar boundary layer equation solutions in direct problem calculations are identified for the case of accelerating flow. As a separation or reattachment point is approached, the multiple solutions approach each other and become identical. The computer code used to generate these results was developed for the solution of compressible, laminar or turbulent boundary layer, and free wake problems, in either direct or inverse mode. Similarity solutions in either a primitive variable or a stream function form are possible, and the resulting equations are solved by means of a modified Keller's Box scheme in which the energy equation and turbulence modeling equations are solved simultaneously with the continuity and momentum equations. Examples illustrating the nature of the solutions at the separation and reattachment points are presented.

Drela, M.↗
NASA NTRS1984

Hybrid approach to steady transonic normal-shock compressible laminar boundary-layer interactions over airfoils

A simulation of steady transonic viscous-inviscid interactions through a combination of zonal solution methods (involving different equation sets and numerical regions for various flow regions) is used in an investigation of a fluid mechanics problem in which the pressure distribution is determined by the interaction between transonic inviscid flow and an inner laminar viscous layer. The results obtained are in good agreement with laminar experimental data. Both attached and separated boundary layer flows are considered for either weak or strong interactions.

Ram, R. B.↗
NASA NTRS1982

Hybrid laminar flow control study

Hybrid laminar flow control (HLFC) in which leading edge suction is used in conjunction with wing pressure distribution tailoring to postpone boundary layer transition and reduce friction drag was examined. Airfoil design characteristics required for laminar flow control (LFC) were determined. The aerodynamic design of the HLFC wing for a 178 passenger commercial turbofan transport was developed, and a drag was estimated. Systems changes required to install HLFC were defined, and weights and fuel economy were estimated. The potential for 9% fuel reduction for a 3926-km (2120-nmi) mission is identified.

Source record↗
NASA NTRS1985

Generation and development of small-amplitude disturbances in a laminar boundary layer in the presence of an acoustic field

A low-turbulence subsonic wind tunnel was used to study the influence of acoustic disturbances on the development of small sinusoidal oscillations (Tollmien-Schlichting waves) which constitute the initial phase of turbulent transition. It is found that acoustic waves propagating opposite to the flow generate vibrations of the model (plate) in the flow. Neither the plate vibrations nor the acoustic field itself have any appreciable influence on the stability of the laminar boundary layer. The influence of an acoustic field on laminar boundary layer disturbances is limited to the generation of Tollmien-Schlichting waves at the leading-edge of the plate.

Kachanov, Y. S.↗
NASA NTRS1983

Inviscid analysis of two supercritical laminar-flow-control airfoils at design and off-design conditions

Inviscid transonic flow results are provided at design and off design conditions for two supercritical laminar flow control airfoils. The newer airfoil, with its lower suction requirements for full chord laminar flow, has a higher design Mach number, steeper pressure gradients, a more positive pressure level in the forward region of the lower surface, and a recovery to a less positive pressure at the trailing edge. The two dimensional design Mach numbers for the two airfoils are 0.755 and 0.730 at a common design lift coefficient of 0.60, and their thickness to chord ratios are 0.131 and 0.135, respectively. Off design shock formation characteristics are similar for the two airfoils over a range of Mach numbers between 0.6 and 0.8 and lift coefficients from 0.4 to 0.7. The newer airfoil is similar to the one used in a large chord swept model experiment designed for the Langley 8 Foot Transonic Pressure Tunnel.

Allison, D. O.↗
NASA NTRS1985

Hybrid approach to steady transonic normal shock-compressible laminar boundary layer interactions over airfoils with suction

Transonic airfoil flow is to a large degree affected by viscous-inviscid interactions. Among them a key role is played by the boundary layer interaction with the shock wave embedded in the flow field and the interaction of the boundary layer with the sustained adverse pressure gradients. The effects of these interactions can be controlled or suppressed by introducing surface mass transfer such as suction. This investigation deals strictly with the study of shock-laminar boundary layer interactions including distributed mass transfer. The present calculations agree with experiments on a swept LFC wing at low speeds which indicates that with a suitable choice of the extent of the airfoil surface over which suction is applied and adjustment of the suction velocity, full-chord laminar flow can be maintained and separation can be prevented completely.

Ram, R. B.↗
NASA NTRS1985

Natural laminar flow hits smoother air

Natural laminar flow (NLF) may be attained in aircraft with lower cost, weight, and maintenance penalties than active flow laminarization by means of a slot suction system. A high performance general aviation jet aircraft possessing a moderate degree of NLF over wing, fuselage, empennage and engine nacelles will accrue a 24 percent reduction in total aircraft drag in the cruise regime. NASA-Langley has conducted NLF research centered on the use of novel airfoil profiles as well as composite and milled aluminum alloy construction methods which minimize three-dimensional aerodynamic surface roughness and waviness. It is noted that higher flight altitudes intrinsically reduce unit Reynolds numbers, thereby minimizing turbulence for a given cruise speed.

Holmes, B. J.↗
NASA NTRS1984

Experimental Results for a Flapped Natural-laminar-flow Airfoil with High Lift/drag Ratio

Experimental results have been obtained for a flapped natural-laminar-flow airfoil, NLF(1)-0414F, in the Langley Low-Turbulence Pressure Tunnel. The tests were conducted over a Mach number range from 0.05 to 0.40 and a chord Reynolds number range from about 3.0 x 10(6) to 22.0 x 10(6). The airfoil was designed for 0.70 chord laminar flow on both surfaces at a lift coefficient of 0.40, a Reynolds number of 10.0 x 10(6), and a Mach number of 0.40. A 0.125 chord simple flap was incorporated in the design to increase the low-drag, lift-coefficient range. Results were also obtained for a 0.20 chord split-flap deflected 60 deg.

Mcghee, R. J.↗
NASA NTRS1986

Response of hot element flush wall gauges in oscillating laminar flow

The time dependent response characteristics of flush-mounted hot element gauges used as instruments to measure wall shear stress in unsteady periodic air flows were investigated. The study was initiated because anomalous results were obtained from the gauges in oscillating turbulent flows for the phase relation of the wall shear stress variation, indicating possible gauge response problems. Flat plate laminar oscillating turbulent flows characterized by a mean free stream velocity with a superposed sinusoidal variation were performed. Laminar rather than turbulent flows were studied, because a numerical solution for the phase angle between the free stream velocity and the wall shear stress variation that is known to be correct can be obtained. The focus is on comparing the phase angle indicated by the hot element gauges with corresponding numerical prediction for the phase angle, since agreement would indicate that the hot element gauges faithfully follow the true wall shear stress variation.

Giddings, T. A.↗
NASA NTRS1986

Design and fabrication of large suction panels with perforated surfaces for laminar flow control testing in a transonic wind tunnel

Considerable progress has been made in the development of perforated suction surface material for laminar flow control applications. Electron-beam perforated titaniuum skin was used as the suction surface. Critical issues related to suction panel manufacturing were identified and largely resolved. The final product included fabrication of a 7-foot chord by 7-foot span perforated laminar flow control wind tunnel model. Techniques used can be adapted to modern aircraft production lines. The report includes details on panel instrumentation and other features required for testing in a transonic pressure tunnel.

Maddalon, D. V.↗
NASA NTRS1986

Compressible laminar boundary layer with real gas effects for flight conditions to M(e) = 8 and T(o) = 2500 K

One of the problems for the hypersonic flights is the lack of accurate methods for predicting the boundary layer parameters at high Mach numbers and temperatures. At high Mach numbers and temperatures, the real gas effects should be included in calculations of the compressible laminar and turbulent boundary layers. By introducing the Mangler-Levy-Lees transformation, the compressible laminar boundary layer equations were transformed into two ordinary differential equations. To solve these ordinary differential equations for the flow over a flat plate, the Runge-Kutta method of order 5 and 6 was used with a secant method of solving the simultaneous nonlinear equations for the boundary layer conditions. Instead of using the perfect gas assumptions, the properties of air in the temperature range of 100 to 2500 K at M(e) = 8 were used for the calculations. The calculations were carried out for free flight conditions. The real gas effects were significant for the conditions of high freestream Mach numbers, and the boundary layer parameters from the real gas solutions were quite different from the existing formulas and solutions.

Nagamatsu, H. T.↗
NASA NTRS1986

Design of a natural laminar flow wing for a transonic corporate transport

Two- and three-dimensional computational methods were used to design a wing for a transonic corporate transport that had significant runs of laminar flow on both upper and lower wing surfaces at the cruise condition. The airfoil was derived from a low-speed laminar-flow section. The contour was systematically modified based on results from a two-dimensional transonic code to give favorable pressure gradients to 50-percent chord on the upper surface and 65-percent chord on the lower surface. Three-dimensional transonic codes were used to determine the wing twist and to evaluate the aerodynamic characteristics of the complete configuration at various flight conditions. A leading-edge modification for improved stall characteristics was also designed. The theoretical pressure distributions for the final airfoil correlated well with results from wind-tunnel tests.

Campbell, R. L.↗