Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Jamming”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

The role of precise time in IFF

The application of precise time to the identification of friend or foe (IFF) problem is discussed. The simple concept of knowing when to expect each signal is exploited in a variety of ways to achieve an IFF system which is hard to detect, minimally exploitable and difficult to jam. Precise clocks are the backbone of the concept and the various candidates for this role are discussed. The compact rubidium-controlled oscillator is the only practical candidate.

Bridge, W. M.↗
NASA NTRS1982

Study of certain tether safety issues. Continuation of investigation of electrodynamic stabilization and control of long orbiting tethers, volume 1

The behavior of long tethers (10-100 km) in space are addressed under two failure situations with potential safety impact: instantaneous jamming of the reel controlling the tether during deployment and cutting of the tether due to a meteor strike or other similar phenomena. Dual and multiple mass point models were used in the SAO SKYHOOK program to determine this behavior. The results of the program runs were verified analytically or by comparison with previously verified results. The study included the effects of tether damping and air drag where appropriate. Most runs were done with the tether system undamped since we believe this best represents the true behavior of the tether. Means for controlling undesirable behavior of the tether, such as viscous dampers in the subsatellite, were also studied.

Colombo, G.↗
NASA NTRS1982

Differentially coherent detection of QASK for frequency-hopping systems. I - Performance in the presence of a Gaussian noise environment

Bandwidth-conserving modulation techniques, which trade average power for bandwidth in a favorable exchange, have recently found widespread application in digital radio and satellite communication systems. Quadrature amplitude-shift-keying (QASK) is a particular type of the considered techniques. QASK makes use of multilevel signals to amplitude modulate the in-phase and quadrature components of a carrier. Frequency hopping (FH) is used to protect a conventional communication system from radio frequency interference (RFI) or jamming. Differentially coherent detection provides a possible solution to the effect of phase discontinuities introduced by FH. The application of such a detection technique to QASK signals is discussed. A receiver structure is proposed and its symbol error probability performance for an additive white Gaussian noise (AWGN) background is investigated.

Simon, M. K.↗
NASA NTRS1982

Coded error probability evaluation for antijam communication systems

We present a general union-Chernoff bound on the bit error probability for coded communication systems and apply it to examples of antijam systems. The key feature of this bound is the decoupling of the coding aspects of the system from the remaining part of the communication system which includes jamming, suboptimum detectors, and arbitrary decoding metrics which may or may not use jammer state knowledge

Omura, J. K.↗
NASA NTRS1981

Frequency synchronization of a frequency-hopped MFSK communication system

This paper presents the performance of fine-frequency synchronization. The performance degradation due to imperfect frequency synchronization is found in terms of the effect on bit error probability as a function of full-band or partial-band noise jamming levels and of the number of frequency hops used in the estimator. The effect of imperfect fine-time synchronization is also included in the calculation of fine-frequency synchronization performance to obtain the overall performance degradation due to synchronization errors.

Huth, G. K.↗
NASA NTRS1981

Time synchronization of a frequency-hopped MFSK communication system

In a frequency-hopped (FH) multiple-frequency-shift-keyed (MFSK) communication system, frequency hopping causes the necessary frequency transitions for time synchronization estimation rather than the data sequence as in the conventional (nonfrequency-hopped) system. Making use of this observation, this paper presents a fine synchronization (i.e., time errors of less than a hop duration) technique for estimation of FH timing. The performance degradation due to imperfect FH time synchronization is found in terms of the effect on bit error probability as a function of full-band or partial-band noise jamming levels and of the number of hops used in the FH timing estimate.

Simon, M. K.↗
NASA NTRS1982

Ice sculpture in the Martian outflow channels

Viking Orbiter and terrestrial satellite images are examined at similar resolution to compare features of the Martian outflow channels with features produced by the movement of ice on earth, and many resemblances are found. These include the anastomoses, sinuosities, and U-shaped cross profiles of valleys; hanging valleys; linear scour marks on valley walls; grooves and ridges on valley floors; and the streamlining of bedrock highs. Attention is given to the question whether ice could have moved in the Martian environment. It is envisaged that springs or small catastrophic outbursts discharged fluids from structural outlets or chaotic terrains. These fluids built icings that may have grown into substantial masses and eventually flowed like glaciers down preexisting valleys. An alternative is that the fluids formed rivers or floods that in turn formed ice jams and consolidated into icy masses in places where obstacles blocked their flow.

Lucchitta, B. K.↗
NASA NTRS1983

A fault tolerant design for autonomous attitude control of the DSCS-III communication satellite

The first of a new series of satellites, which will provide the principal elements in the Defense Space Communications System (DSCS), was launched on Oct. 31, 1982. This satellite, DSCS-III, is part of a system which will consist of super-high frequency communications satellites in synchronous, equatorial orbits, continuously operating in four widely separate geographic regions. The DSCS-III is designed both to maintain critical communications in the presence of an electronic jamming threat and to survive nuclear radiation exposure. The results of the present investigation are to provide a basis for the design of a spacecraft tolerant of on-board failures, survivable against external threats, and capable of performing its mission autonomously for periods as long as six months.

Matijevic, J.↗
NASA NTRS1984

Microwelding of various metallic materials under ultravacuum (A0138-10)

In the space vacuum environment, the spacecraft mechanisms are liable to sustain damaging effects from microwelds due to molecular diffusion of the spacecraft constituent metals. Such microwelds result in a continuing increase in the friction factors and are even liable to jam the mechanisms altogether. The object of this experiment is to check the metal surfaces representative of the mechanism constituent metals (treated or untreated, lubricated or unlubricated) for microwelds afater an extended stay in the space environment. The experimental approach is to passively expose inert metal specimens to the space vacuum and to conduct end-of-mission verification of the significance of microwelds between various pairs of metal washers. The experiment will be located in one of the FRECOPA boxes in a 12-in. -deep peripheral tray that contains nine other experiments from France.

Assie, J. P.↗
NASA NTRS1983

Differential versus limiter-discriminator detection of narrow-band FM

The error probability performance of differential detection of narrow-band FM is determined and compared with the analogous results for limiter-discriminator detection of the same modulation. It is shown that over a large class of benign and hostile environments, e.g., Gaussian IF filter, AWGN, partial-band noise jamming, the differential detector offers no theoretical performance advantage over the limiter-discriminator receiver with integrate-and-dump postdetection filtering.

Simon, M. K.↗
NASA NTRS1984

Emerging Space Nuclear Power Needs

Growing interest in new classes of military and civil space systems which demand substantial increases in power over current satellites is generating a renewed interest in space qualified nuclear power systems. Indeed, one can say that power is a limiting technology to the achievement of many future goals in space. The speed of nuclear power system development is currently limited by the lack of a clear distinct definition of system requirements. Emerging system requirements are discussed for the following fields: robust surveillance systems, survivable communication systems with anti-jam capabilities, electric propulsion systems, and weapons applications.

Redd, F. J.↗
NASA NTRS1985

On the probability density function of the squared envelope of a sum of random phase vectors

Weber et al. (1980) have found that a generic problem arises in the study of multiuser FHMA/MFSK systems. According to this problem, the presence of the other channel users acts as interference to reception of the desired user's transmission. The present investigation is concerned with a recursive solution in which the recursion parameter is the number of vectors in the sum. A mathematical characterization of such a solution is presented, taking into account the simple two-vector case in which a well-known closed form result is possible. Some numerical results are also discussed. It is pointed out that the considered recursive solution provides a break in the bottleneck associated with the exact computation of the error probability performance of multiuser FHMA/MFSK systems and single access MFSK systems corrupted by multitone jamming.

Simon, M. K.↗
NASA NTRS1986

Feasibility study of a discrete bearing/roller drive rotary joint for the space station

The most critical mechanism on board the proposed space station is the continously rotating joint which must accurately align the solar power units with the sun during earth orbit. The feasibility of a multiple, discrete bearing supported joint driven by a self-loading, pinch drive actuator was investigated for this application. This concept appears to offer greater protection against catastrophic jamming, less sensitivity to adverse thermal gradients, greater accessibility to inorbit servicing or replacement and greater adaptability to very large (5 m) truss members than to more conventional continuous support bearing/gear reducer joints. Analytical trade studies performed herein establish that a discrete cam roller bearing support system having eight hangers around a continuous ring would provide sufficient radial and bending stiffness to prevent any degradation in the fundamental frequencies of the solar wing structure. Furthermore, it appears that the pinch roller drive mechanism can be readily sized to meet or exceed system performance and service life requirements. Wear life estimates based on experimental data for a steel roller coated with an advanced polyimide film show a continuous service life more than two orders of magnitude greater than required for this application.

Loewenthal, S. H.↗
NASA NTRS1986

The investigation of tethered satellite system dynamics

The analysis of the rotational dynamics of the satellite was focused on the rotational amplitude increase of the satellite, with respect to the tether, during retrieval. The dependence of the rotational amplitude upon the tether tension variation to the power 1/4 was thoroughly investigated. The damping of rotational oscillations achievable by reel control was also quantified while an alternative solution that makes use of a lever arm attached with a universal joint to the satellite was proposed. Comparison simulations between the Smithsonian Astrophysical Observatory and the Martin Marietta (MMA) computer code of reteival maneuvers were also carried out. The agreement between the two, completely independent, codes was extremely close, demonstrating the reliability of the models. The slack tether dynamics during reel jams was analytically investigated in order to identify the limits of applicability of the SLACK3 computer code to this particular case. Test runs with SLACK3 were also carried out.

Lorenzini, E. C.↗
NASA NTRS1985

Generation, modulation and reception of orthogonally polarized signals

The radiating electromagnetic field of a dipole antenna is considered. By allowing the dipole to rotate about its midpoint, one can construct an entire set of signal polarizations wherein distinct members of the set are mutually orthogonal. It is shown how these signals can be modulated and demodulated to convey information. These ideas are then generalized, and both balanced, as well as unbalanced quadrapole modulations are defined. Methods of receiver synchronization to such signals are described, as well as their potential application to multiple access and anti-jam communications.

Lesh, J. R.↗
NASA NTRS1987

Solenoid Valve With Self-Compensation

New solenoid-operated miniature shutoff valve provides self-compensation of differential pressure forces that cause jamming or insufficient valve closure as in single-seal valves. Dual-seal valve is bidirectional. Valve simultaneously seals both inlet and outlet tubes by pressing single disk of silicone rubber against ends of both.

Woeller, Fritz H.↗
NASA NTRS1986

The Spartan attitude control system - Control electronics assembly

The Spartan attitude control system (ACS) represents an evolutionary development of the previous STRAP-5 ACS through the use of state-of-the-art microprocessors and hardware. Despite a gyro rate signal noise problem that caused the early depletion of argon gas, the Spartan 101 experiment was able to collect several hours of data from two targets. Attention is presently given to the ACS sequencer module, sensor interface box, valve driver box, control electronics software, jam tables, and sequencer programs.

Stone, R. W.↗
NASA NTRS1989

Hatch Cover Slides Through Hatch

Hatch cover for pressurized vessel provides tight seal but opened quickly from either side. In opening or closing, cover sweeps out relatively little volume within vessel, so it does not hinder movement of people or objects from vessel to outside or placement of people or objects near hatch. Cover uses internal pressure to create seal when closed. Design of cover eliminates leakage paths, and cover immune to hazards of sudden decompression or jamming when bolts and latches fail.

Alton, Charles↗