Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Infrared techniques”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Investigations of lubricant rheology as applied to elastohydrodynamic lubrication

The pressure viscometer was modified to permit the measurement of viscosity at elevated pressures and shear stresses up to 5 x 10 to the 6th power N/sq m (720 psi). This shear stress is within a factor of three of the shear stress occurring in a sliding ehd point contact such as occurs in the ehd simulator. Viscosity data were taken on five lubricant samples, and it was found that viscous heating effects on the viscosity were predominant and not non-Newtonian behavior at the high shear stresses. The development of the infrared temperature measuring technique for the ehd simulator was completed, and temperature data for a set of operating conditions and one lubricant are reported. The numerical analysis of the behavior of nonlinear lubricants in the lubrication of rollers is reported.

Carlson, S.↗
NASA NTRS1973

Temperature measurements in sliding elastohydrodynamic point contacts

Techniques using the infrared radiation emitted by a sliding elastohydrodynamic (EHD) point contact to measure oil film and surface temperature are discussed. Temperature distributions in the EHD contact are presented for a naphthenic mineral oil at 1.04 GN/sq m (150,000 psi) Hertz pressure and several sliding velocities. Film temperatures as high as 360 C are reported at locations near the points of minimum film thickness in the contact side lobes.

Turchina, V.↗
NASA NTRS1975

Conclusions from the discussions on observational results of heterodyne spectroscopy in astronomy

Experimental results in astronomy obtained with the aid of infrared heterodyne detection techniques are considered, taking into account the detection of thermal emission with no dispersion at the intermediate frequency and observations involving molecular line detection. The tuning range of a heterodyne spectrometer and of a Fourier transform spectrometer is considered and attention is given to the selection of the appropriate technique for a specific investigative problem.-

Mumma, M.↗
NASA NTRS1977

Applied Remote Sensing Program (ARSP)

Descriptions of projects engaged by the Applied Remote Sensors Program in the state of Arizona are contained in an annual report for the fiscal year 1976-1977. Remote sensing techniques included thermal infrared imagery in analog and digital form and conversion of data into thermograms. Delineation of geologic areas, surveys of vegetation and inventory of resources were also presented.

Mouat, D. A.↗
NASA NTRS1977

Proceedings of the Eleventh International Symposium on Remote Sensing of Environment, volume 2

Application and processing of remotely sensed data are discussed. Areas of application include: pollution monitoring, water quality, land use, marine resources, ocean surface properties, and agriculture. Image processing and scene analysis are described along with automated photointerpretation and classification techniques. Data from infrared and multispectral band scanners onboard LANDSAT satellites are emphasized.

Source record↗
NASA NTRS1979

Post-shock temperatures in minerals

An experimental technique was developed for measuring post-shock temperatures in a wide variety of materials, including those of geophysical interest such as silicates. The technique uses an infrared radiation detector to determine the brightness temperature of samples shocked to pressures in the range 5 to approximately 30 GPa; in these experiments measurements were made in two wavelength ranges (4.5 to 5.75 microns and 7 to 14 microns). Reproducible results, with the temperatures in the two wavelength bands generally in excellent agreement, were obtained for aluminum-2024 (10.5 to 33 GPa, 125 to 260 C), stainless steel-304 (11.5 to 50 GPa, 80 to 350 C), crystalline quartz (5.0 to 21.5 GPa, 80 to 250 C), forsterite (7.5 to 28.0 GPa, approximately 30 to 160 C) and Bamble bronzite (6.0 to 26.0 GPa, approximately 30 to 225 C). It is concluded that release adiabat data should be used, wherever available, for calculations of residual temperature, and that adequate descriptions of the shock and release processes in minerals are more complex than generally assumed.

Raikes, S. A.↗
NASA NTRS1981

Ceramic and coating applications in the hostile environment of a high temperature hypersonic wind tunnel

A Mach 7, blowdown wind tunnel was used to investigate aerothermal structural phenomena on large to full scale high speed vehicle components. The high energy test medium, which provided a true temperature simulation of hypersonic flow at 24 to 40 km altitude, was generated by the combustion of methane with air at high pressures. Since the wind tunnel, as well as the models, must be protected from thermally induced damage, ceramics and coatings were used extensively. Coatings were used both to protect various wind tunnel components and to improve the quality of the test stream. Planned modifications for the wind tunnel included more extensive use of ceramics in order to minimize the number of active cooling systems and thus minimize the inherent operational unreliability and cost that accompanies such systems. Use of nonintrusive data acquisition techniques, such as infrared radiometry, allowed more widespread use of ceramics for models to be tested in high energy wind tunnels.

Puster, R. L.↗
NASA NTRS1980

Kinetics of the ClO + NO2 + M reaction

The ClO + NO2 + M reaction has been studied with two techniques: Fourier transform infrared spectroscopy of the products, and flash photolysis-ultraviolet absorption to monitor the decay of ClO in excess NO2. The measured third-order rate constant is 1.5 x 10 to the -31st cm to the 6th/molecule-squared per sec at 298 K with M = N2, in good agreement with previous literature values, but the rate constant appears to decrease by up to a factor of three in the presence of increasing amounts of OClO. For the infrared studies a stoichiometric mixture of ClO and NO2 was prepared in a flow system by mixing NO with OClO; at least as much NO2 as ClONO2 was produced under a variety of experimental conditions. These two sets of results are incompatible with the assumption made in previous kinetic studies that ClONO2 is the only recombination product; other isomers such as OClONO or ClOONO are likely to be formed three to four times faster. These results imply that potential stratospheric ozone depletion due to chlorofluoromethanes may be even larger than previously thought.

Molina, M. J.↗
NASA NTRS1982

The variability of stratospheric nitrogen compounds observed by LIMS in the winter of 1978-1979

The LIMS experiment was launched on the Nimbus 7 satellite for the purpose of sounding the vertical structure of temperature and key upper atmosphere trace gases on a global scale. The technique of thermal infrared limb sounding was used to obtain measurements of O3, H2O, NO2, and HNO3. LIMS collected data almost continuously from late October to late May over the latitude range from 64 deg S to 84 deg N. Two of the gases, NO2 and HNO3, are important elements in the NO(x) chain of chemical reactions leading to ozone destruction. Results for these gases are described in terms of zonal mean profiles and latitudinal distributions. The period selected for study is January-May 1979, when a major stratospheric warming occurred.

Russell, J. M., III↗
NASA NTRS1984

Earth-Based Planetary Data

NASA sponsors Earth-based planetary astronomy to provide data needed for: planning future missions; supporting missions already in progress; and enhanching the scientific analysis of data returned by past missions. Such data complement spacecraft data by providing observational coverage of important planetary phenomena at epochs before and after spacecraft encounters, with time scales longer than a spacecraft encounter, and at wavelengths and spectral resolutions not covered by spacecraft instruments. Earth-based planetary data are defined here as: observations made with ground based telescopes, balloon-borne instruments, rocket-borne instruments, and Earth-orbiting spacecraft. Data in the last category differ somewhat in nature and availability from the other three. In all categories, planetary data are only a subset of the total astronomical observations on record. As a result part of the task is to identify and extract (or separately catalog) those observations which are planetary. The data cover wavelengths in the ultraviolet, the visual, and the infrared. The instrumental techniques addressed are: imaging, polarimetry, photometry, spectrophotometry, and spectroscopy.

Source record↗
NASA NTRS1985

Studies of molecular properties of polymeric materials: Aerospace environmental effects on three linear polymers

The development of crystal handling techniques for reflection infrared spectroscopy and methods for the fabrication and testing of tensile specimens are discussed. Data from mechanical, ac and dc electrical, and electron paramagnetic resonance studies conducted to determine the effects of 0.1-MeV and 1.0-MeV electron radiation on Mylar, Kapton, Ultem, and metal-doped Ultem are presented. Total doses ranging from 1 X 10 to the 8 rads to 1 X 10 to the 10 rads and dose rates from 5 X 10 to the 7 rads/hr to 1 X 10 to the 9 rads/hr were employed. The results of a study on the effects of aircraft service-environment fluids on Ultem are also reported. The weights and mechanical properties of Ultem were evaluated before and after exposure to water, JP4, Skydrol, an antifreeze, and a paint stripper.

Harries, W. L.↗
NASA NTRS1988

Thermographic Inspection Of Coatings

Use of infrared thermography proposed for inspection of some kinds of coatings. Sample heated radiantly from behind viewed by infrared thermography. Defects in coating visible at infrared wavelengths. Inspection technique executed by remote scanning or robotic scanning with automatic electronic detection of anomalies.

Riehl, W. A.↗
NASA NTRS1988

Infrared low-level wind shear work

Results of field experiments for the detection of clear air disturbance and low level wind shear utilizing an infrared airborne system are given in vugraph form. The hits, misses and nuisance alarms scores are given. Information is given on the infrared spatial resolution technique. The popular index of aircraft hazard (F= WX over g - VN over AS) is developed for a remote temperature sensor.

Adamson, Pat↗
NASA NTRS1990

Loop current eddy shedding estimated using Geosat altimeter data

A method for extracting periodic signals from altimeter data is applied in the Gulf of Mexico using data from the first two years of the Geosat Exact Repeat Mission. The least squares fitting of selected frequencies of sine and cosine functions to the time series of sea surface height at each point of the Geosat ground track is used to estimate the dominant frequency in the gulf for this time period. Optimal interpolation of the sine and cosine coefficients at the dominant frequency to a uniformly spaced grid allows reconstruction of the time series in the gulf and shows eddies shedding from the Loop Current with a period of approximately 10.5 months, consistent with shedding periods determined from numerical models and analysis of satellite infrared data. This technique is a novel method for investigation of periodic signals in Geosat altimetry and is not severely affected by the data outages present in the time series.

Jacobs, Gregg A.↗
NASA NTRS1992

Determining The Degree Of Graphitization In Carbon Composites

Method for determining degree of graphitization of carbon/carbon composite material combines infrared spectral experimental technique with thermodynamical theoretical model of solubility. By interrupting manufacturing process at almost any time and applying method, one can judge quality of composite and monitor chemical transformations taking place during process. Also computes effective solubility parameter for composite considered as unitary material. Parameter significant for subsequent fabrication steps involving chemical treatments; e.g., coating or joining with adhesives.

Lawson, Daniel D.↗
NASA NTRS1992

Visual augmentation for night flight over featureless terrain

Visual augmentation technique based on infrared cueing lights which project from the aircraft to the terrain is proposed to mitigate the problems associated with night flight over regions with featureless terrains. A series of simulation studies evaluated the effectiveness of several cueing light configurations. Results indicate that certain relatively low-cost cueing light configurations can be effectively used as pseudo-flight directors without impairing the pilot's use of available natural cues in the scene. Pilots prefer configurations which provide multiple samples of the forward terrain. Providing several 'look-aheads' helps to resolve potential vehicle/terrain state ambiguities. It is concluded that cueing lights are capable of creating visual patterns which are readily interpreted and translated to control commands, thus providing pilots with intuitive, low-workload decision aids.

Kaiser, Mary K.↗
NASA NTRS1994

The accuracy of temperature distributions used to derive the net transport for a zonally averaged model

Comparisons of satellite-derived temperatures with correlative temperatures indicate that the LIMS temperatures are accurate and contain more of the needed vertical resolution for calculating a residual mean circulation for transporting tracer-like species. Generally, the LIMS temperatures are accurate to at least 2 K. Other satellite data sets are comprised of temperatures with coarser vertical resolution, leading to biases that occur with an error pattern that is characteristic of their resolution. Their biases exceed 2 K at some altitudes. Retrievals of species using an infrared limb emission technique are sensitive to any temperature bias. Generally, the IMS comparisons with other data sets for ozone and water vapor are good to better than 20 percent; this represents an independent confirmation of the quality of LIMS and temperatures. Zonal mean comparisons between LIMS and SAMS temperatures also indicate agreement to better than 2 K from about 7 to 2hPa. Therefore, we are confident that SAMS N2O and CH4 are relatively free of temperature bias in that region. These factors support the generally good agreement in G90 between model N2O transported using a LIMS-derived RMC and the N2O contours from SAMS.

Remsberg, Ellis E.↗
NASA NTRS1995

Discrimination of alkalinity in granitoid Rocks: A potential TIMS application

In mineral exploration, the ability to distinguish and map petrochemical variations of magmatic rocks can be a useful reconnaissance tool. Alkalinity is one such petrochemical parameter and is used in the characterization of granitoid rocks. In quartz normative plutonic rocks, alkalinity is related to the composition and abundance of feldspars. Together with quartz abundance, knowledge of feldspar modes allows the classification of these igneous rocks according to the Streckeisen diagram. Alternative classification schemes rely on whole rock geochemistry instead of mineral identifications. The relative ease of obtaining whole rock analyses means that geochemical classifications tend to be favored in exploration geology. But the technique of thermal infrared spectroscopy of rocks yields information on mineralogy and is one that can be applied remotely. The goal of the current work then is to establish whether data from TIMS can be used to distinguish the mineralogical variations that relate to alkalinity. An ideal opportunity to test this thesis arises from the work presented in a paper by Dewitt (1989). This paper contains the results of mapping and analysis of Proterozoic plutonic rocks in north-central Arizona. The map resulting from this work delineates plutons according to alkalinity in an effort to establish a trend or polarity in the regional magmatism. Also contained within this paper are brief descriptions of the mineralogy of half of the region's plutons. This combination of mineralogical and geochemical information was the rationale behind choosing this area as a site for TIMS over flights. A portion of the region centered on the northern Bradshaw Mountains was selected because it contains plutons of all three alkalinity classifications (alkali-calcic, calc-alkalic, and calic) present on DeWitt's map within a relatively small area. The site was flown in August of 1994 and the data received a few days before the writing of this manuscript. Most of this paper is devoted to the description of laboratory based spectroscopy and spectral simulations. These are required to gain insight into the correct procedures for enhancing the relatively small differences in the low spectral resolution TIMS data.

Ruff, Steven W.↗