Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “In situ”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

In-Situ Process Monitoring, Synchronization, and Mapping Laser Powder Bed Fusion Builds of Ti6Al4V

The use of in-situ process monitoring is of interest to lower the cost of inspection for the qualification of laser powder bed fusion (LPBF) parts. Precise monitoring of the LPBF-AM build process constitutes a multi-scale and multi-discipline task. There are several significant challenges to the in-situ approach: the synchronization of sensor signals to process steps, the physical interpretation and classification of sensor signals, managing very large datasets, and comparing the inputs with the observed monitoring signals. At NASA Langley Research Center, a configurable architecture additive testbed has been developed to monitor the build process with synchronized sensors. The philosophy and method adopted for the synchronization of the cameras with laser power & position Ti-6Al-4V LPBF are described. The synchronized in-situ monitoring signals are compared with ex-situ nondestructive inspection and optical microscopy observations. Such comparisons permit a better understanding of how the sequential process actions of LPBF-AM can affect build quality.

Laser Powder Bed Fusion↗

Satellite-Assisted Particulate Matter (SAPM) for the Models, In situ, and Remote sensing of Aerosols (MIRA) Working Group

Models, In situ, and Remote sensing of Aerosols (MIRA) is an international working group that aims to foster collaborations amongst these three major aerosol specialties. It consists of a collection of interdisciplinary and independently funded projects/topics with clearly-defined goals. Currently there are four MIRA topic areas, including Satellite-Assisted Particulate Matter (SAPM), which is focused specifically on fine particulate matter (PM2.5). The study of PM2.5 is important due to its significant contribution to air pollution and resultant, adverse human health effects. The goal of the SAPM topic group is to conduct and provide intercomparisons of various methods and techniques to obtain surface PM2.5 estimates assisted by satellite remote sensors, global aerosol models, and in situ aerosol measurements. Some benefits of space-based/model-assisted PM2.5 retrievals include providing PM2.5 approximations in regions with poor in situ ground station coverage and a means for assessing spatial/temporal PM2.5 variations on regional and/or global scales. Furthermore, benefits of spaceborne lidar/model-assisted PM2.5 retrievals include providing nighttime PM2.5 estimates and characterization of near-surface aerosol vertical structure. SAPM is seeking international datasets of mass scattering/absorption coefficient and aerosol hygroscopic properties for different aerosol species, as well as ground-based in situ PM2.5 measurements. In this poster presentation, we give an overview of SAPM, and show results from three recent/ongoing PM2.5 studies. These efforts involve deriving surface PM2.5 concentrations from two spaceborne lidars, the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) and Cloud-Aerosol Transport System (CATS), and investigating key variables that impact the estimation of PM2.5 from model simulated aerosol optical depth (AOD) using the Goddard Earth Observing System (GEOS) model.

Travis D. Toth↗

ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications

Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogeneities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications

Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogeneities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications

Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogeneities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications

Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogenities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

ICME and In-Situ Process Monitoring for Rapid Qualification of Components Made by Laser-based Powder Bed Additive Manufacturing Processes for Nuclear Structural Applications

Additive manufacturing (AM) through selective powder bed melting of successive layers is being considered as disruptive technology for rapid production of low-cost nuclear reactor internal components with complex geometries. However, there is a potential for non-uniform distribution of physical features, such as porosity or microstructural differences, due to variations of temperature across a component build. These heterogenities make the deployment of traditional material qualification and non-destructive evaluation of AM components difficult. This research project explored the feasibility of using in-situ process monitoring methods and integrated computational materials engineering (ICME) principles as an alternate qualification methodology and approach. This project included six individual tasks: (i) design of artifacts relevant to the nuclear power industry, (ii) evaluation of laser processing and in-situ measurements, (iii) computational modeling, (iv) ex-situ microstructural characterization, (v) evaluation of scaling the methodology for large-scale structures, and (vi) development of a data package to codes and standards organizations. As a part of this research, laser powder bed fusion of metals (316L, Alloy 718, and Ti6Al4V) was explored. This document provides an overview of the research performed over three years and serves as the final U.S. Department of Energy report for this project. In the third year, the project focused on the following activities: (a) in-situ infrared and optical imaging of each layer during processing of representative stainless steel geometries; (b) development of methodologies to analyze the data; and (c) application of ICME methodologies and other experiments to estimate the relevance of defects and microstructure to tensile properties.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Charging Reactions Promoted by Geometrically Necessary Dislocations in Battery Materials Revealed by In Situ Single-Particle Synchrotron Measurements

Crystallographic defects exist in many redox active energy materials, e.g., battery and catalyst materials, which significantly alter their chemical properties for energy storage and conversion. However, there is lack of quantitative understanding of the interrelationship between crystallographic defects and redox reactions. Herein, crystallographic defects, such as geometrically necessary dislocations, are reported to influence the redox reactions in battery particles through single-particle, multimodal, and in situ synchrotron measurements. Through Laue X-ray microdiffraction, many crystallographic defects are spatially identified and statistically quantified from a large quantity of diffraction patterns in many layered oxide particles, including geometrically necessary dislocations, tilt boundaries, and mixed defects. The in situ and ex situ measurements, combining microdiffraction and X-ray spectroscopy imaging, reveal that LiCoO 2 particles with a higher concentration of geometrically necessary dislocations provide deeper charging reactions, indicating that dislocations may facilitate redox reactions in layered oxides during initial charging. The present study illustrates that a precise control of crystallographic defects and their distribution can potentially promote and homogenize redox reactions in battery materials.

25 ENERGY STORAGE↗

In situ study on heavy ion irradiation induced microstructure evolution in single crystal Cu with nanovoids at elevated temperature

Understanding the response of nanovoids to irradiation damage advances our capability to design radiation tolerant materials. Recent in situ studies reveal the shrinkage of hexagon-shaped nanovoids in (110) textured Cu. However, the evolution of voids with irregular geometries under irradiation is less well understood. Here, in situ Kr ion irradiation was performed at 100 °C on single-crystal Cu (112) that possesses nanovoids with high aspect ratio. In situ studies show these elongated voids fragment into smaller voids and shrink gradually with increasing dose. Phase field simulations confirm that fragmentation of the void is governed by the competing kinetics between atoms diffusing toward and away from the elongated nanovoid. In conclusion, cost irradiation analysis reveals the formation of high-density defect clusters.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Steering the Methane Dry Reforming Reactivity of Ni/La 2 O 3 Catalysts by Controlled In Situ Decomposition of Doped La 2 NiO 4 Precursor Structures

The influence of A- and/or B-site doping of Ruddlesden-Popper perovskite materials on the crystal structure, stability, and dry reforming of methane (DRM) reactivity of specific A 2 BO 4 phases (A = La, Ba; B = Cu, Ni) has been evaluated by a combination of catalytic experiments, in situ X-ray diffraction, X-ray absorption spectroscopy (XAS), X-ray photoelectron spectroscopy (XPS), and aberration-corrected electron microscopy. At room temperature, B-site doping of La 2 NiO 4 with Cu stabilizes the orthorhombic structure ( Fmmm ) of the perovskite, while A-site doping with Ba yields a tetragonal space group ( I 4/ mmm ). We observed the orthorhombic-to-tetragonal transformation above 170 °C for La 2 Ni 0.9 Cu 0.1 O 4 and La 2 Ni 0.8 Cu 0.2 O 4 , slightly higher than for undoped La 2 NiO 4 . Loss of oxygen in interstitial sites of the tetragonal structure causes further structure transformations for all samples before decomposition in the temperature range of 400 °C-600 °C. Controlled in situ decomposition of the parent or A/B-site doped perovskite structures in a DRM mixture (CH 4 :CO 2 = 1:1) in all cases yields an active phase consisting of exsolved nanocrystalline metallic Ni particles in contact with hexagonal La 2 O 3 and a mixture of (oxy)carbonate phases (hexagonal and monoclinic La 2 O 2 CO 3 , BaCO 3 ). Differences in the catalytic activity evolve because of (i) the in situ formation of Ni-Cu alloy phases (in a composition of >7:1 = Ni:Cu) for La 2 Ni 0.9 Cu 0.1 O 4 , La 2 Ni 0.8 Cu 0.2 O 4 , and La 1.8 Ba 0.2 Ni 0.9 Cu 0.1 O 4 , (ii) the resulting Ni particle size and amount of exsolved Ni, and (iii) the inherently different reactivity of the present (oxy)carbonate species. Based on the onset temperature of catalytic DRM activity, the latter decreases in the order of La 2 Ni 0.9 Cu 0.1 O 4 ~ La 2 Ni 0.8 Cu 0.2 O 4 ≥ La 1.8 Ba 0.2 Ni 0.9 Cu 0.1 O 4 > La 2 NiO 4 > La 1.8 Ba 0.2 NiO 4 . Simple A-site doped La 1.8 Ba 0.2 NiO 4 is essentially DRM inactive. The Ni particle size can be efficiently influenced by introducing Ba into the A site of the respective Ruddlesden-Popper structures, allowing us to control the Ni particle size between 10 nm and 30 nm both for simple B-site and A-site doped structures. Hence, it is possible to steer both the extent of the metal-oxide-(oxy)carbonate interface and its chemical composition and reactivity. Counteracting the limitation of the larger Ni particle size, the activity can, however, be improved by additional Cu-doping on the B-site, enhancing the carbon reactivity. Exemplified for the La 2 NiO 4 based systems, we show how the delicate antagonistic balance of doping with Cu (rendering the La 2 NiO 4 structure less stable and suppressing coking by efficiently removing surface carbon) and Ba (rendering the La 2 NiO 4 structure more stable and forming unreactive surface or interfacial carbonates) can be used to tailor prospective DRM-active catalysts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Utah FORGE 2-2446: Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity - Workshop Presentation

This is a presentation on the Closing the Loop Between In-situ Stress Complexity and EGS Fracture Complexity project by Lawrence Livermore National Laboratory, presented by Dr. Matteo Cusini. The project's objective was to employ a combination of high-fidelity simulations and true-triaxial block fracturing tests at high temperature to explore the intricate relationship between in-situ stress and hydraulic fracture patterns and better characterize the in-situ stress at Utah FORGE. This presentation was featured in the Utah FORGE R&D Annual Workshop on September 7, 2023. The workshop provided a valuable opportunity to explore the progress made in each of the 17 Research and Development projects funded under Solicitation 2020-1 which aim to enhance our understanding of the crucial factors influencing the development of Enhanced Geothermal Systems (EGS) reservoirs and resources.

15 GEOTHERMAL ENERGY↗

Utah FORGE 2-2439v2: Characterizing In-Situ Stress with Laboratory Modelling and Field Measurements - 2024 Annual Workshop Presentation

This is a presentation on A Multi-Component Approach to Characterizing In-Situ Stress at the Utah FORGE Site: Laboratory Modelling and Field Measurements project by The University of Pittsburgh, presented by Andrew Bunger. The project characterizes the stress in the Utah FORGE EGS reservoir using three methods: Method 1: Demonstrate complimentary laboratory rock-core stress estimation combined with Machine Learning approach for measuring in-situ stress from field sonic log data; Method 2: Complete field based in-situ measurement (mini-frac); and Method 3: Develop a mechanics-based method for connection near wellbore stress measurements to stresses away from the well-bore. This presentation was featured in the Utah FORGE R&D Annual Workshop on August 14, 2024.

15 GEOTHERMAL ENERGY↗

Cationic Copper Species Stabilized by Zinc during the Electrocatalytic Reduction of CO 2 Revealed by In Situ X‐Ray Spectroscopy

Abstract Advanced in situ X‐ray absorption spectroscopy characterization of electrochemically co‐electrodeposited bi‐element copper alloy electrodes shows that zinc yields the formation of a stable cationic Cu species during the electroreduction of CO 2 at high cathodic polarization. In contrast, the formation/stabilization of cationic Cu species in copper oxides, or doping Cu with another element, like Ni, is not possible. It is found that the pure and mixed Cu:Zn electrodes behave similarly in term of electrocatalytic selectivity to multi‐carbon products. At higher Zn concentrations the electrode behaves like the pure Zn catalyst, which indicates that the Cu cationic species do not have a significant influence on the selectivity to multi‐carbon products. It is found that in the non‐monotonically distribution of products is dominated in term of surface energy in which copper prefers the surface. Otherwise, this work highlights the importance of in situ characterization to uncover the mechanisms mediating the catalytic reactions in contrast to ex situ or post mortem analysis, which can be a source of misinterpretation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Forming Gas Annealing Improves the Performance of Ex Situ Sb-Doped CdSeTe Thin-Film Solar Cells

Group V doping in cadmium-selenide-telluride (CdSeTe) polycrystalline thin-film solar cells has demonstrated improved power conversion efficiencies (PCEs) and long-term stabilities as compared to the traditional Cu doping in the last decade. The dopants can be successfully incorporated by either in situ or ex situ doping. Here, we report that forming gas (FG) annealing enhances the efficiencies of CdSeTe polycrystalline thin-film solar cells utilizing ex situ antimony (Sb) doping via close-space sublimation of SbCl3 at ambient pressure. The FG annealing increases the hole density and carrier lifetime, reduces the back barrier height, and, therefore, leads to improved open-circuit voltages (VOCs) and fill factors (FFs). The champion device achieves a PCE of 19.2% with a VOC of 877 mV, a current density (JSC) of 30.2 mA/cm2, and an FF of 72.4%. Importantly, the Sb-doped devices showed improved stability under stress tests as compared to Cu-doped devices.

14 SOLAR ENERGY↗

Method for Evaluating Irradiation Effects on Flow Stress in Fe-9%Cr ODS Using TEM In Situ Cantilevers

Transmission electron microscopic (TEM) in situ mechanical testing has become a widely utilized tool for simultaneously measuring mechanical properties and understanding fundamental deformation mechanisms in irradiated and nuclear materials. Although tensile and compression specimen geometries are amongst the most common, opportunities remain for investigating alternative geometries that could provide unique insights into the plasticity of irradiated materials. This research demonstrates a new TEM in situ cantilever beam configuration. Cantilevers are produced from as-received and proton irradiated (1 dpa, 500°C) Fe-9%Cr oxide dispersion strengthened (ODS) steel. Flow stress is measured using a TEM in situ depth-sensing mechanical testing holder. A 200 MPa increase in flow stress is measured due to irradiation. Size effects arise when the intrinsic (i.e. microstructural) size approaches the extrinsic (i.e. external dimensions) size and can be described using a power law relationship as a function of the material microstructure and cantilever dimensions.

36 MATERIALS SCIENCE↗

Irradiation induced void spheroidization, shrinkage and migration in Cu at elevated temperatures: An in situ study

We show understanding the void evolution in irradiation environment is of great interest and significance, as irradiation-induced voids typically lead to pronounced volumetric swelling and degradation of mechanical properties. In situ studies on the irradiation response of nanovoids at elevated temperature remain limited. In this work, we performed systematic in situ 1 MeV Kr ++ irradiations on Cu with nanovoids in a transmission electron microscope up to 350 °C. The in situ studies revealed intriguing void spheroidization, shrinkage and migration. Furthermore, the morphology evolution and migration of nanovoids showed a strong dependence on irradiation temperature and initial void size. Post-irradiation analyses identified defect clusters in the form of stacking fault tetrahedrons, and the remaining large faceted nanovoids. The underlying mechanisms of irradiation-induced void spheroidization and shrinkage were discussed based on phase-field modeling.

36 MATERIALS SCIENCE↗

In-situ TEM investigation of void swelling in nickel under irradiation with analysis aided by computer vision

Understanding the stability of irradiation-induced voids in materials is important for engineering material's swelling behavior under irradiation. In-situ TEM offers a spatial and temporal resolution that is suitable for investigating the evolution of voids under irradiation. However, the in-situ videos have often been too large to be analyzed manually, leaving the valuable data underutilized. For this work, we developed a deep learning-based semantic segmentation model to consistently study the growth and shrinkage of voids in nickel under 1 MeV krypton ion irradiation at various temperatures from 525 °C to 650 °C. With a foil thickness near 100 nm and ion flux of 6.3 × 10 11 ions∙ cm –2 ∙s –1 , the pre-existing voids, which were created beforehand by irradiation at 600 °C to 0.5 dpa, shrank at low temperatures and grew at high temperatures under irradiation, where the transition occurred at 575 °C (~0.5 T M ). The observed stability transition provided new insight for the shrinkage mechanism of voids under irradiation. In addition, an annealing experiment on nickel, previously irradiated at 600 °C to 3 dpa, was performed sequentially at 650 °C to 720 °C to reveal the shrinkage rate of void as a function of temperature and void size. The advantage of combining computer vision and in-situ TEM to obtain comprehensive void evolution was demonstrated.

36 MATERIALS SCIENCE↗

In situ laser profilometry for material segmentation and digital reconstruction of a multicomponent additively manufactured part

In addition to its ability to produce geometrically complex parts, additive manufacturing offers a unique opportunity to collect data about a component while it is being fabricated. However, there has only been limited effort to characterize parts morphologically and compositionally in situ. In this article, we present a layer-by-layer, laser profilometry-based in situ characterization technique as a method to digitally reconstruct a multi-material part. Data collected by the laser profilometer yields height maps and grayscale images which are voxelized using purpose-built software to volumetrically reconstruct the part. Additionally, the same part was also analyzed using X-ray computed tomography (CT) which was not able to resolve the different compositional regions within the part, but captured the filament morphology. The part was then bisected to compare the digital reconstruction to the actual part morphology and composition. Overall, the digital reconstruction was in good agreement with both the CT and bisected images. Deviations between the digital reconstruction and the CT/bisected images are likely the result of image segmentation settings or material shifts after data was collected. The in situ characterization method demonstrated here sets the stage for real time process monitoring and paves the way for additively manufactured parts that are “born qualified.”

36 MATERIALS SCIENCE↗