Results for “Image analysis” — Page 17

NASA NTRS1983

Atomization and combustion performance of antimisting kerosene and jet fuel

Combustion performance of antimisting kerosene (AMK) containing FM-9 polymer was investigated at various levels of degradation (restoration of AMK for normal use in a gas turbine engine). To establish the relationship of degradation and atomization to performance in an aircraft gas turbine combustor, sprays formed by the nozzle of a JT8-D combustor with Jet A and AMK at 1 atmosphere (atm) (14.1 lb/square in absolute) pressure and 22 C at several degradation levels were analyzed. A new spray characterization technique based on digital image analysis of high resolution, wide field spray images formed under pulsed ruby laser sheet illumination was developed. Combustion tests were performed for these fuels in a JT8-D single can combustor facility to measure combustion efficiency and the lean extinction limit. Correlation of combustion performance under simulated engine operating conditions with nozzle spray Sauter mean diameter (SMD) measured at 1 atm and 22 C were observed. Fuel spray SMD and hence the combustion efficiency are strongly influenced by fuel degradation level. Use of even the most highly degraded AMK tested (filter ratio = 1.2) resulted in an increase in fuel consumption of 0.08% to 0.20% at engine cruise conditions.

Fleeter, R.↗

NASA NTRS1986

SOT: A rapid prototype using TAE windows

The development of the window interface extension feature of the Transportable Applications Executive (TAE) is discussed. This feature is being used to prototype a space station payload interface in order to demonstrate and assess the benefits of using windows on a bit mapped display and also to convey the concept of telescience, the control and operation of space station payloads from remote sites. The prototype version of the TAE with windows operates on a DEC VAXstation 100. This workstation has a high resolution 19 inch bit mapped display, a keyboard and a three-button mouse. The VAXstation 100 is not a stand-alone workstation, but is controlled by software executing on a VAX/8600. A short scenario was developed utilizing the Solar Optical Telescope (SOT) as an example payload. In the scenario the end-user station includes the VAXstation 100 plus an image analysis terminal used to display the CCD images. The layout and use of the prototype elements, i.e., the root menu, payload status window, and target acquisition menu is described.

Stephens, Mark↗

NASA NTRSDate not supplied

Recent Advances in Soft Matter Characterization Capabilities Developed at NASA GRC for Lunar Exploration: Differential Dynamic Microscopy to Spectroscopy to Computer Vision

In 1991, famous French scientist Pierre-Gilles de Genes was awarded Nobel prize for his impactful research in soft matter, more specifically polymers. He is defined as the founding father of soft matter. In his Nobel lecture (https://www.nobelprize.org/uploads/2018/06/gennes-lecture.pdf ) he described soft matter aka complex fluids as materials with two primary features – (a) complexity and (b) flexibility. The sub-categories of soft matter (e.g.- granular materials, polymers, foams, colloids etc.) are defined on the basis of Pierre-Gilles de Gennes’ definition. At NASA GRC, we are pushing the boundaries for fundamental study of soft matter on Lunar Surface. With regard to Lunar surface science, we are focusing on developing capabilities pertaining to granular materials and bio-soft/active matter to facilitate future efforts in ISRU and bio-ISRU capabilities. In order to achieve fundamental goals of soft matter research within the limitations of Lunar environment, the scientific capabilities need to be small, flexible, modular, off the shelf and the focus needs to be more on developing an interdisciplinary capability that leverages the recent growth in AI/ML and Computer Vision to augment our understanding of fundamental science. This strategy would allow us to reduce our resource requirement during launch, installation, and occupied real estate footprint on Lunar surface In this talk, we will go over 3 different capabilities that we have developed in house and in close collaboration – (a) Differential Dynamic Microscopy (DDM), (b) Portable In-situ Chemical Spectroscopy (PICS) and (c) Computer Vision Enabled Observation. At very high level, Differential Dynamic Microscopy (DDM) allows us to study the structure-property-process relation (microrheology) of bio-soft/active matter using optical microscope and improved image analysis capabilities. PICS uses AI/ML-based advanced signal deconvolution and analysis technique that can work with existing portable spectroscopy tools to perform materials analysis (e.g.- granular materials and bio-soft/active matter) inspection on the go. Finally, computer vision enabled analysis allows us to use simple camera images for 3D reconstruction of experimental process and tracking of objects of interest in an experiment. We expect that this detailed process will allow us reach a thorough understanding of soft matter in Lunar environment. The capabilities developed by us will help to validate and establish fundamental understanding in Lunar environment. This will, in turn, allow us to guide future space exploration missions and expand the knowledge base of the scientific and engineering communities.

Suman Sinha Ray↗

NASA NTRSDate not supplied

Recent Advances in Soft Matter Characterization Capabilities Developed at NASA GRC for Lunar Exploration: Differential Dynamic Microscopy to Spectroscopy to Computer Vision

In 1991, famous French scientist Pierre-Gilles de Genes was awarded Nobel prize for his impactful research in soft matter, more specifically polymers. He is defined as the founding father of soft matter. In his Nobel lecture (https://www.nobelprize.org/uploads/2018/06/gennes-lecture.pdf ) he described soft matter aka complex fluids as materials with two primary features – (a) complexity and (b) flexibility. The sub-categories of soft matter (e.g.- granular materials, polymers, foams, colloids etc.) are defined on the basis of Pierre-Gilles de Gennes’ definition. At NASA GRC, we are pushing the boundaries for fundamental study of soft matter on Lunar Surface. With regard to Lunar surface science, we are focusing on developing capabilities pertaining to granular materials and bio-soft/active matter to facilitate future efforts in ISRU and bio-ISRU capabilities. In order to achieve fundamental goals of soft matter research within the limitations of Lunar environment, the scientific capabilities need to be small, flexible, modular, off the shelf and the focus needs to be more on developing an interdisciplinary capability that leverages the recent growth in AI/ML and Computer Vision to augment our understanding of fundamental science. This strategy would allow us to reduce our resource requirement during launch, installation, and occupied real estate footprint on Lunar surface. In this talk, we will go over 3 different capabilities that we have developed in house and in close collaboration – (a) Differential Dynamic Microscopy (DDM), (b) Portable In-situ Chemical Spectroscopy (PICS) and (c) Computer Vision Enabled Observation. At very high level, Differential Dynamic Microscopy (DDM) allows us to study the structure-property-process relation (microrheology) of bio-soft/active matter using optical microscope and improved image analysis capabilities. PICS uses AI/ML-based advanced signal deconvolution and analysis technique that can work with existing portable spectroscopy tools to perform materials analysis (e.g.- granular materials and bio-soft/active matter) inspection on the go. Finally, computer vision enabled analysis allows us to use simple camera images for 3D reconstruction of experimental process and tracking of objects of interest in an experiment. We expect that this detailed process will allow us reach a thorough understanding of soft matter in Lunar environment. The capabilities developed by us will help to validate and establish fundamental understanding in Lunar environment. This will, in turn, allow us to guide future space exploration missions and expand the knowledge base of the scientific and engineering communities.

Suman Sinha-Ray↗

NASA NTRSDate not supplied

Recent Advances in Soft Matter Characterization Capabilities Developed at NASA GRC for Lunar Exploration: Differential Dynamic Microscopy to Spectroscopy to Computer Vision

In 1991, famous French scientist Pierre-Gilles de Genes was awarded Nobel prize for his impactful research in soft matter, more specifically polymers. He is defined as the founding father of soft matter. In his Nobel lecture (https://www.nobelprize.org/uploads/2018/06/gennes-lecture.pdf ) he described soft matter aka complex fluids as materials with two primary features – (a) complexity and (b) flexibility. The sub-categories of soft matter (e.g.- granular materials, polymers, foams, colloids etc.) are defined on the basis of Pierre-Gilles de Gennes’ definition. At NASA GRC, we are pushing the boundaries for fundamental study of soft matter on Lunar Surface. With regard to Lunar surface science, we are focusing on developing capabilities pertaining to granular materials and bio-soft/active matter to facilitate future efforts in ISRU and bio-ISRU capabilities. In order to achieve fundamental goals of soft matter research within the limitations of Lunar environment, the scientific capabilities need to be small, flexible, modular, off the shelf and the focus needs to be more on developing an interdisciplinary capability that leverages the recent growth in AI/ML and Computer Vision to augment our understanding of fundamental science. This strategy would allow us to reduce our resource requirement during launch, installation, and occupied real estate footprint on Lunar surface In this talk, we will go over 3 different capabilities that we have developed in house and in close collaboration – (a) Differential Dynamic Microscopy (DDM), (b) Portable In-situ Chemical Spectroscopy (PICS) and (c) Computer Vision Enabled Observation. At very high level, Differential Dynamic Microscopy (DDM) allows us to study the structure-property-process relation (microrheology) of bio-soft/active matter using optical microscope and improved image analysis capabilities. PICS uses AI/ML-based advanced signal deconvolution and analysis technique that can work with existing portable spectroscopy tools to perform materials analysis (e.g.- granular materials and bio-soft/active matter) inspection on the go. Finally, computer vision enabled analysis allows us to use simple camera images for 3D reconstruction of experimental process and tracking of objects of interest in an experiment. We expect that this detailed process will allow us reach a thorough understanding of soft matter in Lunar environment. The capabilities developed by us will help to validate and establish fundamental understanding in Lunar environment. This will, in turn, allow us to guide future space exploration missions and expand the knowledge base of the scientific and engineering communities.

Suman Sinha Ray↗

NASA NTRSDate not supplied

Recent Advances in Soft Matter Characterization Capabilities Developed at NASA GRC

In 1991, famous French scientist Pierre-Gilles de Genes was awarded Nobel prize for his impactful research in soft matter, more specifically polymers. He is defined as the founding father of soft matter. In his Nobel lecture (https://www.nobelprize.org/uploads/2018/06/gennes-lecture.pdf ) he described soft matter aka complex fluids as materials with two primary features – (a) complexity and (b) flexibility. The sub-categories of soft matter (e.g.- granular materials, polymers, foams, colloids etc.) are defined on the basis of Pierre-Gilles de Gennes’ definition. At NASA GRC, we are pushing the boundaries for fundamental study of soft matter on Lunar Surface. With regard to Lunar surface science, we are focusing on developing capabilities pertaining to granular materials and bio-soft/active matter to facilitate future efforts in ISRU and bio-ISRU capabilities. In order to achieve fundamental goals of soft matter research within the limitations of Lunar environment, the scientific capabilities need to be small, flexible, modular, off the shelf and the focus needs to be more on developing an interdisciplinary capability that leverages the recent growth in AI/ML and Computer Vision to augment our understanding of fundamental science. This strategy would allow us to reduce our resource requirement during launch, installation, and occupied real estate footprint on Lunar surface In this talk, we will go over 3 different capabilities that we have developed in house and in close collaboration – (a) Differential Dynamic Microscopy (DDM), (b) Portable In-situ Chemical Spectroscopy (PICS) and (c) Computer Vision Enabled Observation. At very high level, Differential Dynamic Microscopy (DDM) allows us to study the structure-property-process relation (microrheology) of bio-soft/active matter using optical microscope and improved image analysis capabilities. PICS uses AI/ML-based advanced signal deconvolution and analysis technique that can work with existing portable spectroscopy tools to perform materials analysis (e.g.- granular materials and bio-soft/active matter) inspection on the go. Finally, computer vision enabled analysis allows us to use simple camera images for 3D reconstruction of experimental process and tracking of objects of interest in an experiment. We expect that this detailed process will allow us reach a thorough understanding of soft matter in Lunar environment. The capabilities developed by us will help to validate and establish fundamental understanding in Lunar environment. This will, in turn, allow us to guide future space exploration missions and expand the knowledge base of the scientific and engineering communities.

Suman Sinha Ray↗

NASA NTRSDate not supplied

Autonomous Navigation of a Lunar Relay Using GNSS and Other Measurements

Many of the highest priority destinations at the Moon lack a continuous view of Earth, such as the lunar poles or lunar far side. Exploration of these sites will require spacecraft in cislunar space to relay communications and provide position, navigation, and timing (PNT) services. Accurate knowledge of relay position, velocity, and time is essential to these services. This paper describes a concept for a PNT Instrument being developed for the Lunar Communications Relay and Navigation Systems (LCRNS) Project. The instrument is intended as a payload that would enable autonomous, on-board, real-time navigation and timing using Global Navigation Satellite System (GNSS), optical navigation, and one-way measurements from Earth-based ground stations. Hardware-in-the-loop simulations using flight software are used to realistically characterize performance on hardware platforms with a path to flight. These results provide preliminary validation of the proposed PNT Instrument, demonstrate the benefits of augmenting GNSS with other measurements, and serve as an insightful reference for the design of future lunar missions, including those that will operate within the LunaNet framework of standards. This instrument concept relies on several technologies developed at NASA Goddard Space Flight Center (GSFC). For GNSS observables, the instrument relies on the high-altitude NavCube 3 mini (NC3m) GNSS receiver specifically designed for cislunar applications. The autoNGC system, which consists of flight software and a hardware platform, is responsible for fusing the observables using its extended Kalman filter, the Goddard Enhanced Onboard Navigation System (GEONS). Optical navigation observables are processed within autoNGC (“autonomous Navigation, Guidance, and Control”) using the Goddard Image Analysis & Navigation Tool (GIANT) which is also responsible for simulating high-fidelity images for test and analysis. In addition to describing the PNT Instrument and its components, the paper will present predicted performance based on simulation results. As a baseline, it will present GNSS-only hardware-in-the loop results using a NC3m test unit to process Spirent-simulated GPS signals in a potential lunar relay trajectory: a 12-hour elliptical frozen lunar orbit (ELFO). GEONS then processes the GPS pseudorange and time differenced carrier phase measurements to estimate and propagate the relay state (position, velocity, and time). These results extend previously published work that showed preliminary ELFO performance. Previous work has shown the importance of other measurement types, so additional simulations are performed which augment GNSS with ground station observables and several methods of optical navigation, including celestial navigation, limb-finding (e.g., observations of the lunar horizon), and terrain relative navigation (TRN). TRN involves correlating simulated predicted images of the lunar surface with actual imagery; misalignments of landmarks identified in each image are translated into relay state updates. TRN is valuable as a measurement of the relay’s state relative to the Moon, especially during GNSS outages or after maneuvers. One-way Pseudorange and Doppler measurements from Earth-based ground stations are also simulated. The full set of observables is processed using autoNGC. These simulations make use of autoNGC and NC3m test units, a lab atomic clock, and a pulse-per-second (PPS) generation and distribution system. This combination of subsystems, and the hardware platforms used in this analysis, represents a PNT Instrument that could be flown on a lunar relay. Results from the hardware-in-the-loop simulations presented in this paper provide a preliminary assessment of the achievable navigation performance of this instrument concept. PNT Instrument performance is compared to the GPS-only performance, and a discussion is provided on the apparent merits and challenges of each measurement type.

Ben Ashman↗

NASA NTRS2018

James Webb Space Telescope Primary and Secondary Mirror Segment Assemblies Cleaning: a Quantitative Assessment

The James Webb Space Telescope Primary Mirror Segment Assemblies (PMSAs) and Secondary Mirror Assembly (SMA) were cleaned at the Johnson Space Center (JSC) in January 2018. In order to quantify the effectiveness of the cleaning, the same cleaning process was performed on the PMSA and SMA traveling witness wafers. These wafers have accompanied their respective mirror segments from their arrival at the Goddard Space Flight Center, through transport to JSC, and ultimately their exposure in Chamber A for cryogenic testing. The traveling wafers were analyzed using an Image Analysis automated microscope both prior to and after the cleaning. The resulting data showed that the PMSA wafers' Percent Area Coverage (PAC) reduced by 83.5% on average, from 0.1524 PAC to 0.0251 PAC. The SMA wafer's PAC decreased by 97.2%, from 0.1194 PAC to 0.0034 PAC. Further analysis of the particle size bins was completed in order to calculate their particle distribution slopes. The slope of the PMSA wafers increased by 0.025 on average, and the SMA wafer slope increased by 0.066. This indicates that the ratio of large to small particles slightly increased after the cleaning across all mirror segments. Visual inspections of the wafers and the flight PMSAs and SMA showed considerable and comparable particulate coverage improvements, thus leading to the conclusion that the average PAC on the PMSAs and SMA improved by the same factor as their respective wafers.

mirror↗

NASA NTRS1999

Fidelity Analysis of Sampled Imaging Systems

Many modeling, simulation and performance analysis studies of sampled imaging systems are inherently incomplete because they are conditioned on a discrete-input, discrete-output model that only accounts for blurring during image acquisition and additive noise. For those sampled imaging systems where the effects of digital image acquisition, digital filtering and reconstruction are significant, the modeling, simulation and performance analysis should be based on a more comprehensive continuous-input, discrete-processing, continuous-output end-to-end model. This more comprehensive model should properly account for the low-pass filtering effects of image acquisition prior to sampling, the potentially important noiselike effects of the aliasing caused by sampling, additive noise due to device electronics and quantization, the generally high-boost filtering effects of digital processing, and the low-pass filtering effects of image reconstruction. This model should not, however, be so complex as to preclude significant mathematical analysis, particularly the mean-square (fidelity) type of analysis so common in linear system theory. We demonstrate that, although the mathematics of such a model is more complex, the increase in complexity is not so great as to prevent a complete fidelity-metric analysis at both the component level and at the end-to-end system level: that is, computable mean-square-based fidelity metrics are developed by which both component-level and system-level performance can be quantified. In addition, we demonstrate that system performance can be assessed qualitatively by visualizing the output image as the sum of three component images, each of which relates to a corresponding fidelity metric. The cascaded, or filtered, component accounts for the end-to-end system filtering of image acquisition, digital processing, and image reconstruction; the random noise component accounts for additive random noise, modulated by digital processing and image reconstruction filtering; and the aliased noise component accounts for the frequency folding effect of sampling, modulated by digital processing and image reconstruction filtering.

Park, Stephen K.↗

NASA NTRS1973

Analysis of ERTS imagery using special electronic viewing/measuring equipment

An electronic satellite image analysis console (ESIAC) is being employed to process imagery for use by USGS investigators in several different disciplines studying dynamic hydrologic conditions. The ESIAC provides facilities for storing registered image sequences in a magnetic video disc memory for subsequent recall, enhancement, and animated display in monochrome or color. Quantitative measurements of distances, areas, and brightness profiles can be extracted digitally under operator supervision. Initial results are presented for the display and measurement of snowfield extent, glacier development, sediment plumes from estuary discharge, playa inventory, phreatophyte and other vegetative changes.

Evans, W. E.↗

NASA NTRS1977

Applications of LANDSAT data to the integrated economic development of Mindoro, Phillipines

LANDSAT data is seen as providing essential up-to-date resource information for the planning process. LANDSAT data of Mindoro Island in the Philippines was processed to provide thematic maps showing patterns of agriculture, forest cover, terrain, wetlands and water turbidity. A hybrid approach using both supervised and unsupervised classification techniques resulted in 30 different scene classes which were subsequently color-coded and mapped at a scale of 1:250,000. In addition, intensive image analysis is being carried out in evaluating the images. The images, maps, and aerial statistics are being used to provide data to seven technical departments in planning the economic development of Mindoro. Multispectral aircraft imagery was collected to compliment the application of LANDSAT data and validate the classification results.

Wagner, T. W.↗

NASA NTRS1994

Citrus Inventory

An aerial color infrared (CIR) mapping system developed by Kennedy Space Center enables Florida's Charlotte County to accurately appraise its citrus groves while reducing appraisal costs. The technology was further advanced by development of a dual video system making it possible to simultaneously view images of the same area and detect changes. An image analysis system automatically surveys and photo interprets grove images as well as automatically counts trees and reports totals. The system, which saves both time and money, has potential beyond citrus grove valuation.

Source record↗

NASA NTRSDate not supplied

Autonomous Navigation, Guidance, and Control Software in a Low SWaP Box

Onboard autonomy is a necessity for responsive space operations. Autonomous navigation, guidance, and control (NGC) enables space missions to reduce their dependence on high demand ground assets and costly ground personnel. It also allows for in-situ decision making and higher return on mission data. A flight software and hardware system providing this capability, called “autoNGC,” is currently being developed at NASA Goddard Space Flight Center for infusion into multiple future missions. The autoNGC flight software is built on the plug-and-play architecture of the core Flight System (cFS) consisting of the standard cFS apps and newly developed autoNGC interface apps and libraries. The various apps cooperate through communication over the message-based software bus. With the plug-and-play architecture of autoNGC, cFS apps can easily be added and replaced to meet the needs of different missions, even after launch. The first flight software release of autoNGC is targeted for Summer 2024 to provide autonomous navigation at the Moon and beyond. It can perform sensor fusion of multiple measurement types including pseudo-range from a Global Navigation Satellite System (GNSS) receiver (including weak signal), 1-way and 2-way range and Doppler from ground stations (i.e., direct to Earth (DTE)), bearing and range from optical camera images, and accelerometer data. Accurate onboard navigation and timing is obtained through the Goddard Enhanced Onboard Navigation System (GEONS) software library which fuses different measurement types through an extended Kalman filter (EKF) framework. Optical measurements that are ingested in GEONS are first extracted from optical images by the cFS Goddard Image Analysis and Navigation Tool (cGIANT) app. If the imaged body is far enough away that it appears as a pixel or cluster of pixels, then bearing angles to the body centroid can be provided. If the body is close enough and the shape is known coarsely, then bearing angles and range to the body centroid can be derived from the limb. Bearing angles to individual surface features can also be extracted (i.e., terrain relative navigation (TRN)). Onboard guidance and control capabilities are being developed for a future release to perform autonomous station-keeping and trajectory correction maneuvers in multiple orbital regimes. Capabilities to enable distributed systems missions and constellations, such as crosslink measurements, and onboard time management are being developed as well. The first hardware implementation of autoNGC is a minimal size, weight, and power (SWaP) design allowing for inclusion into CubeSats and SmallSat-size buses. Advancements in miniaturized space processors, such as the SpaceCube 3.0 Mini and the SpaceCube Mini-Z are utilized for low SWaP while maintaining a high level of performance. The current enclosure design is 12 cm x 17 cm x 13.5 cm. The box mass is expected to be less than 2 kg, and the nominal power is 21 W. In order to accommodate a wide range of missions, the hardware interfaces are designed for flexibility with a variety of sensor inputs. Through comprehensive testing in the software-in-the-loop, processor-in-the-loop, and hardware-in-the-loop test beds that are concurrently being developed, autoNGC is expected to achieve TRL 6 by late 2024.

Sun Hur-Diaz↗

NASA NTRS2009

Autonomous Instrument Placement for Mars Exploration Rovers

Autonomous Instrument Placement (AutoPlace) is onboard software that enables a Mars Exploration Rover to act autonomously in using its manipulator to place scientific instruments on or near designated rock and soil targets. Prior to the development of AutoPlace, it was necessary for human operators on Earth to plan every motion of the manipulator arm in a time-consuming process that included downlinking of images from the rover, analysis of images and creation of commands, and uplinking of commands to the rover. AutoPlace incorporates image analysis and planning algorithms into the onboard rover software, eliminating the need for the downlink/uplink command cycle. Many of these algorithms are derived from the existing groundbased image analysis and planning algorithms, with modifications and augmentations for onboard use.

Leger, P. Chris↗

NASA NTRS1982

Multispectral Photography

Model II Multispectral Camera is an advanced aerial camera that provides optimum enhancement of a scene by recording spectral signatures of ground objects only in narrow, preselected bands of the electromagnetic spectrum. Its photos have applications in such areas as agriculture, forestry, water pollution investigations, soil analysis, geologic exploration, water depth studies and camouflage detection. The target scene is simultaneously photographed in four separate spectral bands. Using a multispectral viewer, such as their Model 75 Spectral Data creates a color image from the black and white positives taken by the camera. With this optical image analysis unit, all four bands are superimposed in accurate registration and illuminated with combinations of blue green, red, and white light. Best color combination for displaying the target object is selected and printed. Spectral Data Corporation produces several types of remote sensing equipment and also provides aerial survey, image processing and analysis and number of other remote sensing services.

Source record↗

NASA NTRS2010

High-resolution, continuous field-of-view (FOV), non-rotating imaging system

A high resolution CMOS imaging system especially suitable for use in a periscope head. The imaging system includes a sensor head for scene acquisition, and a control apparatus inclusive of distributed processors and software for device-control, data handling, and display. The sensor head encloses a combination of wide field-of-view CMOS imagers and narrow field-of-view CMOS imagers. Each bank of imagers is controlled by a dedicated processing module in order to handle information flow and image analysis of the outputs of the camera system. The imaging system also includes automated or manually controlled display system and software for providing an interactive graphical user interface (GUI) that displays a full 360-degree field of view and allows the user or automated ATR system to select regions for higher resolution inspection.

Huntsberger, Terrance L.↗

NASA NTRS1985

Multispectral Analysis of NMR Imagery

Conference paper discusses initial efforts to adapt multispectral satellite-image analysis to nuclear magnetic resonance (NMR) scans of human body. Flexibility of these techniques makes it possible to present NMR data in variety of formats, including pseudocolor composite images of pathological internal features. Techniques do not have to be greatly modified from form in which used to produce satellite maps of such Earth features as water, rock, or foliage.

Butterfield, R. L.↗

NASA NTRS1992

Image pattern recognition supporting interactive analysis and graphical visualization

Image Pattern Recognition attempts to infer properties of the world from image data. Such capabilities are crucial for making measurements from satellite or telescope images related to Earth and space science problems. Such measurements can be the required product itself, or the measurements can be used as input to a computer graphics system for visualization purposes. At present, the field of image pattern recognition lacks a unified scientific structure for developing and evaluating image pattern recognition applications. The overall goal of this project is to begin developing such a structure. This report summarizes results of a 3-year research effort in image pattern recognition addressing the following three principal aims: (1) to create a software foundation for the research and identify image pattern recognition problems in Earth and space science; (2) to develop image measurement operations based on Artificial Visual Systems; and (3) to develop multiscale image descriptions for use in interactive image analysis.

Coggins, James M.↗