Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTHERMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Performance evaluation of an air conditioning system based on quasi isothermal dehumidifcation

This work presents a first study of novel air conditioning system based on quasi isothermal dehumidification combined with dew-point evaporative cooling through the Maisotsenko cycle (M-Cycle). The dehumidification process is realized in desiccant coated heat exchanger with heat rejection system. The key idea behind the solution is to maximize the cooling effectiveness by creating favourable conditions for dehumidification and evaporative cooling process. This is achieved by rejecting the heat of sorption in the desiccant system and providing cold and dry air for M-Cycle air cooler, which allows the system to be powered by using low-grade heat energy at 50 °C. The analysis is performed on the basis of experimentally validated numerical models of each component combined in a unified model of the system. The goal of the study is to determine the performance of the solution under different operational conditions. In addition two types of M-Cycle air coolers (i.e. cross-flow and regenerative unit) are compared to establish which unit is more suitable as the source of cooling energy for the system. It was established that proposed system is able to provide comfortable room parameters (supply air temperature equal 17 °C and humidity ratio equal 0.010 kg/kg-da) for outdoor air temperatures ranging from 28 to 36 °C and outdoor air humidity ranging from 0.010 to 0.018 kg/kg-da. This means that the proposed solution is able to provide comfortable conditions in temperate and humid climates. Results also indicate that the system consisting of the regenerative M-Cycle HMX allows better cooling load management, offers higher thermal Coefficient of Performance (COP th ) and uses less water compared to the system with the cross-flow HMX. However, the system with cross-flow heat and mass exchanger (HMX) has a relatively greater electrical Coefficient of Performance (COP el ) in most cases.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Chimney effect due to different vertical position of an isothermal horizontal cylinder confined between two adiabatic walls

The variation of natural convection heat transfer from an isothermal horizontal cylinder confined between two adiabatic walls of constant height is investigated by Mach-Zehnder interferometry technique. This paper focuses on the chimney effect due to the vertical position changes of cylinder (Y) located between two walls with a constant distance of W measuring 1.5 cylinder diameter. The cylinder's local and average Nusselt numbers are determined for ratio of vertical position to its diameter ranging from Y/D = (0 to 10), and the Rayleigh number ranging from 3.5 x 10{sup 3} to 1.4 x 10{sup 4}. There is an optimum distance between the walls in which the Nusselt number is maximum. Results are indicated with a single correlation which gives the average Nusselt number as a function of the ratio of vertical position to cylinder diameter and the Rayleigh number. The experimental data shows that there is an optimum vertical position for the cylinder at which the Nusselt number has a maximum value at each Rayleigh number. This optimal vertical position is derived from the correlation and is presented by an equation. The value of the optimum vertical position increases as the Rayleigh number increases. (author)

42 ENGINEERING↗

Effects of confining walls on heat transfer from a vertical array of isothermal horizontal elliptic cylinders

Steady state two-dimensional natural convection heat transfer from the vertical array of five horizontal isothermal elliptic cylinders with vertical major axis which confined between two adiabatic walls has been studied experimentally. Experiments were carried out using a Mach-Zehnder interferometer. The Rayleigh number based on cylinder major axis was in the range 10{sup 3}{<=}Ra{<=}2.5 x 10{sup 3}, and dimensionless wall spacing 1.5{<=} t/b{<=}9 and infinity. The effect of wall spacing and Rayleigh number on the heat transfer from the individual cylinder and the array were investigated. Experiments are performed for ratio wall spacing to major diameter t/b = 1.5, 2, 2.5, 3, 3.5, 4, 5, 6, 7, 8, 9 and infinity. A correlation based on the experimental data for the average Nusselt number of the array as a function of Ra and t/b is presented in the aforementioned ranges. A relation has been derived for optimum wall spacing at which the Nusselt number of the array attains its maximum value. At optimum wall spacing, approximately 10% increase in the heat transfer from the confined array of elliptic cylinders has been observed as compared to the unconfined case. Also, a heat transfer correlation has been proposed for a single elliptic cylinder with vertical major axis and has been compared with earlier works. (author)

42 ENGINEERING↗

A non-isothermal breakage-damage model for plastic-bonded granular materials incorporating temperature, pressure, and rate dependencies

Plastic-bonded granular materials (PBM) are widely used in industrial sectors, including building construction, abrasive applications, and defense applications such as plastic-bonded explosives. The mechanical behavior of PBM is highly nonlinear, irreversible, rate dependent, and temperature sensitive governed by various micromechanical attributions such as grain crushing and binder damage. This paper presents a thermodynamically consistent, microstructure-informed constitutive model to capture these characteristic behaviors of PBM. Key features of the model include a breakage internal variable to upscale the grain-scale information to the continuum level and to predict grain size evolution under mechanical loading. In addition, a damage internal state variable is introduced to account for the damage, deterioration, and debonding of the binder matrix upon loading. Temperature is taken as a fundamental external state variable to handle non-isothermal loading paths. The proposed model is able to capture with good accuracy several important aspects of the mechanical properties of PBM, such as pressure-dependent elasticity, pressure-dependent yield strength, brittle-to-ductile transition, temperature dependency, and rate dependency in the post-yielding regime. Furthermore, the model is validated against multiple published datasets obtained from confined and unconfined compression tests, covering various PBM compositions, confining pressures, temperatures, and strain rates.

Breakage↗

Functional entropy variables: A new methodology for deriving thermodynamically consistent algorithms for complex fluids, with particular reference to the isothermal Navier–Stokes–Korteweg equations

We propose a new methodology for the numerical solution of the isothermal Navier–Stokes–Korteweg equations. Our methodology is based on a semi-discrete Galerkin method invoking functional entropy variables, a generalization of classical entropy variables, and a new time integration scheme. We show that the resulting fully discrete scheme is unconditionally stable-in-energy, second-order time-accurate, and mass-conservative. We utilize isogeometric analysis for spatial discretization and verify the aforementioned properties by adopting the method of manufactured solutions and comparing coarse mesh solutions with overkill solutions. Various problems are simulated to show the capability of the method. Our methodology provides a means of constructing unconditionally stable numerical schemes for nonlinear non-convex hyperbolic systems of conservation laws.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Compliant alkali silicate sealing glass for solid oxide fuel cell applications: Combined stability in isothermal ageing and thermal cycling with YSZ coated ferritic stainless steels

An alkali-containing silicate glass (SCN-1) is currently being evaluated as a candidate sealing glass for solid oxide fuel cell (SOFC) applications. The glass contains about 17 mole% alkalis (K+Na) and has low glass transition and softening temperatures. It remains vitreous and compliant around 750-800oC after sealing without substantial crystallization, as contrary to conventional glass-ceramic sealants, which experience rapid crystallization after the sealing process. The glassy nature and low characteristic temperatures can reduce residual stresses and result in the potential for crack healing. In a previous study, the glass was found to have good thermal cycle stability and was chemically compatible with YSZ coating during short term testing. In the current study, the compliant glass was further evaluated in a more realistic way in that the sealed glass couples were first isothermally aged for 1000h followed by thermal cycling. High temperature leakage was measured. The chemical compatibility was also investigated with powder mixtures at 700 and 800oC to enhance potential interfacial reaction. In addition, interfacial microstructure was examined with scanning electron microscopy and evaluated with regard to the leakage and chemical compatibility results.

30 DIRECT ENERGY CONVERSION↗

Dy–Mn–Si as a representative of family of ‘Dy–Transition Metal–Si’ systems: Its isothermal sections, empirical rProd. Type: FTPules and new rare-earth manganese silicides

X-ray and microprobe analyses were employed for the investigation of Dy–Mn–Si system at 870/1070/1170 K. The Dy–Mn–Si system, contains the known DyMn{sub 2}Si{sub 2}, DyMnSi and Dy{sub 2}Mn{sub 3}Si{sub 5} compounds and DyMn{sub 4}Si{sub 2}, Dy{sub 2}MnSi{sub 2} and Dy{sub 3}Mn{sub 2}Si{sub 3} were new compounds identified first time and their structure are of the type TmCu{sub 4}Sb{sub 2}, Sc{sub 2}CoSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3} respectively. The quasi-binary solid solutions were detected at 870/1070/1170 K: the ThMn{sub 12}-type Dy{sub 8}Mn{sub 87}Si{sub 5}, Th{sub 6}Mn{sub 23}-type Dy{sub 23}Mn{sub 72}Si{sub 5}, MgCu{sub 2}-type Dy{sub 33}Mn{sub 58}Si{sub 9} and AlB{sub 2}-type Dy{sub 38}Mn{sub 2}Si{sub 58}. The other binary compounds of the Dy–Mn–Si system do not show any visible solubility. New phases R{sub 2}MnSi{sub 2} and R{sub 3}Mn{sub 2}Si{sub 3} (R=Gd, Tb, Ho–Tm) were found out and their structure of the type Sc{sub 2}CoSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3} respectively. The specific features of ‘Dy–Transition Metal–Si’ systems were discussed. - Graphical abstract: The isothermal section of Dy–Mn–Si contains the known DyMn{sub 2}Si{sub 2}, DyMnSi, Dy{sub 2}Mn{sub 3}Si{sub 5} and new TmCu{sub 4}Sb{sub 2}-type DyMn{sub 4}Si{sub 2}, Sc{sub 2}CoSi{sub 2}-type Dy{sub 2}MnSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3}-type Dy{sub 3}Mn{sub 2}Si{sub 3} ternary compounds. The ternary solid solution based on the binary compounds of the Dy–Mn and Dy–Si systems: the ThMn{sub 12}-type Dy{sub 8}Mn{sub 87}Si{sub 5}, Th{sub 6}Mn{sub 23}-type Dy{sub 23}Mn{sub 72}Si{sub 5}, MgCu{sub 2}-type Dy{sub 33}Mn{sub 58}Si{sub 9} and AlB{sub 2}-type Dy{sub 38}Mn{sub 2}Si{sub 58}. The other binary compounds of the Dy–Mn–Si system do not show any visible solubility. New Sc{sub 2}CoSi{sub 2}-type R{sub 2}MnSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3}-type R{sub 3}Mn{sub 2}Si{sub 3} phases were discovered for R=Gd, Tb, Ho–Tm. Display Omitted - Highlights: • The Dy–Mn–Si section contains three known and three new ternary compounds (phases). • New phase the TmCu{sub 4}Sb{sub 2}-type DyMn{sub 4}Si{sub 2} compound. • New Sc{sub 2}CoSi{sub 2}-type R{sub 2}MnSi{sub 2} and Hf{sub 3}Ni{sub 2}Si{sub 3}-type R{sub 3}Mn{sub 2}Si{sub 3} were detected for R=Gd–Tm. • Dy–Mn–Si supplements the ‘Dy–3d metal–Si’ series and leads to the ‘RT{sub m}X{sub n}’ row's rule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Dy–Ni–Si system as a representative of the rare earth–Ni–Si family: Its isothermal section and new rare-earth nickel silicides

The Dy–Ni–Si system has been investigated at 1070 K by X-ray and microprobe analysis. The system contains the 12 known compounds DyNi{sub 10}Si{sub 2}, DyNi{sub 5}Si{sub 3}, DyNi{sub 6}Si{sub 6}, DyNi{sub 4}Si, DyNi{sub 2}Si{sub 2}, Dy{sub 2}Ni{sub 3}Si{sub 5}, DyNiSi{sub 3}, Dy{sub 3}Ni{sub 6}Si{sub 2}, DyNiSi{sub 2}, DyNiSi, Dy{sub 3}NiSi{sub 3}, Dy{sub 3}NiSi{sub 2}, and the new compounds Dy{sub 34}Ni{sub 16−27}Si{sub 50−39} (AlB{sub 2}-type), Dy{sub 2}Ni{sub 15.2−14.1}Si{sub 1.8−2.9} (Th{sub 2}Zn{sub 17}-type), ∼Dy{sub 11}Ni{sub 65}Si{sub 24}, ∼Dy{sub 16}Ni{sub 62}Si{sub 22} (unknown structures), DyNi{sub 7}Si{sub 6} (GdNi{sub 7}Si{sub 6}-type), Dy{sub 3}Ni{sub 8}Si (Ce{sub 3}Co{sub 8}Si-type), DyNi{sub 2}Si (YPd{sub 2}Si-type), ∼Dy{sub 40}Ni{sub 47}Si{sub 13} and ∼Dy{sub 5}Ni{sub 2}Si{sub 3} (unknown structures). Quasi–binary solid solutions were detected at 1070 (870 K) for Dy{sub 2}Ni{sub 17}, DyNi{sub 5}, DyNi{sub 7}, DyNi{sub 3}, DyNi{sub 2}, DyNi, DySi{sub 2} and DySi{sub 1.67}. No detectable solubility is observed for the other binary compounds of the Dy–Ni–Si system. The crystal structures of new phases RNi{sub 7}Si{sub 6} (GdNi{sub 7}Si{sub 6}-type), R{sub 3}Ni{sub 8}Si (Ce{sub 3}Co{sub 8}Si-type), RNi{sub 2}Si (YPd{sub 2}Si-type) and R{sub 3}Ni{sub 12}Si{sub 4} (Gd{sub 3}Ru{sub 4}Al{sub 12}-type), with R=Y, Gd–Tm, has been studied. Magnetic properties of few representative compounds are also reported. - Graphical abstract: The Dy–Ni–Si system has been investigated at 1070 K by X-ray and microprobe analysis. The system contains the 12 known compounds DyNi{sub 10}Si{sub 2}, DyNi{sub 5}Si{sub 3}, DyNi{sub 6}Si{sub 6}, DyNi{sub 4}Si, DyNi{sub 2}Si{sub 2}, Dy{sub 2}Ni{sub 3}Si{sub 5}, DyNiSi{sub 3}, Dy{sub 3}Ni{sub 6}Si{sub 2}, DyNiSi{sub 2}, DyNiSi, Dy{sub 3}NiSi{sub 3}, Dy{sub 3}NiSi{sub 2}, and the new compounds Dy{sub 34}Ni{sub 16−27}Si{sub 50−39}, Dy{sub 2}Ni{sub 15.2−14.1}Si{sub 1.8−2.9}, ∼Dy{sub 11}Ni{sub 65}Si{sub 24}, ∼Dy{sub 16}Ni{sub 62}Si{sub 22}, DyNi{sub 7}Si{sub 6}, Dy{sub 3}Ni{sub 8}Si, DyNi{sub 2}Si, ∼Dy{sub 40}Ni{sub 47}Si{sub 13} and ∼Dy{sub 5}Ni{sub 2}Si{sub 3}. Quasi–binary solid solutions were detected for Dy{sub 2}Ni{sub 17}, DyNi{sub 5}, DyNi{sub 7}, DyNi{sub 3}, DyNi{sub 2}, DyNi, DySi{sub 2} and DySi{sub 1.67}. The crystal structures and magnetic properties of new phases RNi{sub 7}Si{sub 6} (GdNi{sub 7}Si{sub 6}-type), R{sub 3}Ni{sub 8}Si (Ce{sub 3}Co{sub 8}Si-type), RNi{sub 2}Si (YPd{sub 2}Si-type) and R{sub 3}Ni{sub 12}Si{sub 4} (Gd{sub 3}Ru{sub 4}Al{sub 12}-type), with R=Y, Gd–Tm, are also reported. - Highlights: • Dy–Ni–Si isothermal section was obtained at 870 K/1070 K. • Twelve known ternary dysprosium nickel silicides were confirmed in Dy–Ni–Si. • Nine new dysprosium nickel silicides were detected in Dy–Ni–Si. • Seventeen new rare earth nickel silicides were detected in (Y, Gd–Tm)–Ni–Si. • Tb{sub 3}Ni{sub 8}Si, Dy{sub 3}Ni{sub 8}Si, Ho{sub 3}Ni{sub 12}Si{sub 4} and DyNi{sub 2}Si show ferromagnetic-like ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isothermal sections of the quasi-ternary systems Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} at 820 K and the physical properties of the ternary phases Ga{sub 5.5}In{sub 4.5}S{sub 15}, Ga{sub 6}In{sub 4}Se{sub 15} and Ga{sub 5.5}In{sub 4.5}S{sub 15}:Er{sup 3+}, Ga{sub 6}In{sub 4}Se{sub 15}:Er{sup 3+}

Isothermal sections of the quasi-ternary systems Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} at 820 K were compared. Along the 50 mol% Ag{sub 2}S(Se), both systems feature continuous solid solutions with the chalcopyrite structure. Along the 17 mol% Ag{sub 2}S(Se), the interactions at the AgIn{sub 5}S(Se){sub 8}–'AgGa{sub 5}S(Se){sub 8}' sections are different. In the Ag{sub 2}S–Ga{sub 2}S{sub 3}–In{sub 2}S{sub 3} system the existence of the layered phase AgGa{sub x}In{sub 5–x}S{sub 8}, 2.25≤x≤2.85, was confirmed (S.G. P6{sub 3}mc). The Ag{sub 2}Se–Ga{sub 2}Se{sub 3}–In{sub 2}Se{sub 3} system features the formation of solid solution (up to 53 mol% Ga{sub 2}Se{sub 3}) based on AgIn{sub 5}Se{sub 8} (S.G. P-42m). Crystal structure, atomic coordinates were determined by powder diffraction method for samples from the homogeneity region of AgIn{sub 5}Se{sub 8}. Specific conductivities of the crystals Ga{sub 6}In{sub 4}Se{sub 15} (1.33·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.94}In{sub 3.96}Er{sub 0.1}Se{sub 15} (3.17·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.5}In{sub 4.5}S{sub 15} (7.94·10{sup −6} Ω{sup −1} m{sup −1}), Ga{sub 5.46}In{sub 4.47}Er{sub 0.07}S{sub 15} (1·10{sup −9} Ω{sup −1} m{sup −1}) were measured at room temperature. Optical absorption and photoconductivity spectra were recorded in the range 400–760 nm. The introduction of erbium leads to an increase in the absorption coefficient and to the appearance of absorption bands at 530, 660, 810, 980, 1530 nm. - Highlights: • Nature of solid solutions in Ag{sub 2}S(Se)–Ga{sub 2}S(Se){sub 3}–In{sub 2}S(Se){sub 3} (820 K) were discussed. • Crystal structures of ternary and quaternary compounds were discussed. • Specific conductivity, optical properties of four single crystals were measured. • Photoconductivity of the Ga{sub 5.5}In{sub 4.5}S{sub 15} in the range 400–760 nm were recorded.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The isothermal section of Gd–Ni–Si system at 1070 K

The Gd–Ni–Si system has been investigated at 1070 K by X-ray and microprobe analyses. The existence of the known compounds, i.e.: GdNi{sub 10}Si{sub 2}, GdNi{sub 8}Si{sub 3}, GdNi{sub 5}Si{sub 3}, GdNi{sub 7}Si{sub 6}, GdNi{sub 6}Si{sub 6}, GdNi{sub 4}Si, GdNi{sub 2}Si{sub 2}, GdNiSi{sub 3}, Gd{sub 3}Ni{sub 6}Si{sub 2}, GdNiSi, GdNiSi{sub 2}, GdNi{sub 0.4}Si{sub 1.6}, Gd{sub 2}Ni{sub 2.35}Si{sub 0.65}, Gd{sub 3}NiSi{sub 2}, Gd{sub 3}NiSi{sub 3} and Gd{sub 6}Ni{sub 1.67}Si{sub 3}, has been confirmed. Moreover, five new phases have been identified in this system. The crystal structure for four of them has been determined: Gd{sub 2}Ni{sub 16−12.8}Si{sub 1−4.2} (Th{sub 2}Zn{sub 17}-type), GdNi{sub 6.6}Si{sub 6} (GdNi{sub 7}Si{sub 6}-type), Gd{sub 3}Ni{sub 8}Si (Y{sub 3}Co{sub 8}Si-type) and Gd{sub 3}Ni{sub 11.5}Si{sub 4.2}(Gd{sub 3}Ru{sub 4}Ga{sub 12}-type). The compound with composition ~Gd{sub 2}Ni{sub 4}Si{sub 3} still remains with unknown structure. Quasi-binary phases, solid solutions, were detected at 1070 K to be formed by the binaries GdNi{sub 5}, GdNi{sub 3}, GdNi{sub 2}, GdNi, GdSi{sub 2} and GdSi{sub 1.67}; while no appreciable solubility was observed for the other binary compounds of the Gd–Ni–Si system. Magnetic properties of the GdNi{sub 6}Si{sub 6}, GdNi{sub 6.6}Si{sub 6} and Gd{sub 3}Ni{sub 11.5}Si{sub 4.2} compounds have also been investigated and are here reported. - Graphical abstract: The Gd–Ni–Si system has been investigated at 1070 K by X-ray and microprobe analyses. The known GdNi{sub 10}Si{sub 2}, GdNi{sub 8}Si{sub 3}, GdNi{sub 5}Si{sub 3}, GdNi{sub 7}Si{sub 6}, GdNi{sub 6}Si{sub 6}, GdNi{sub 4}Si, GdNi{sub 2}Si{sub 2}, GdNiSi{sub 3}, Gd{sub 3}Ni{sub 6}Si{sub 2}, GdNiSi, GdNiSi{sub 2}, GdNi{sub 0.4}Si{sub 1.6}, Gd{sub 2}Ni{sub 2.35}Si{sub 0.65}, Gd{sub 3}NiSi{sub 2}, Gd{sub 3}NiSi{sub 3} and Gd{sub 6}Ni{sub 1.67}Si{sub 3} compounds have been confirmed and five new ~Gd{sub 2}Ni{sub 4}Si{sub 3} (unknown type), Gd{sub 2}Ni{sub 16−12.8}Si{sub 1−4.2} (Th{sub 2}Zn{sub 17}-type), GdNi{sub 6.6}Si{sub 6} (GdNi{sub 7}Si{sub 6}-type), Gd{sub 3}Ni{sub 8}Si (Y{sub 3}Co{sub 8}Si-type) and Gd{sub 3}Ni{sub 11.5}Si{sub 4.2} (Gd{sub 3}Ru{sub 4}Ga{sub 12}-type) compounds have been detected in Gd–Ni–Si system at 1070 K. Quasi-binary phases, solid solutions, were detected at 1070 K to be formed by the binaries GdNi{sub 5}, GdNi{sub 3}, GdNi{sub 2}, GdNi, GdSi{sub 2} and GdSi{sub 1.67}; while no detectable solubility was observed for the other binary compounds of the Gd–Ni–Si system. Magnetic properties of the GdNi{sub 6}Si{sub 6}, GdNi{sub 6.6}Si{sub 6} and Gd{sub 3}Ni{sub 11.5}Si{sub 4.2} compounds have also been investigated and are here reported. - Highlights: • Gd–Ni–Si isothermal section was obtained at 1070 K. • Sixteen known ternary gadolinium nickel silicides were confirmed in Gd–Ni–Si. • Five new gadolinium nickel silicides were detected in Gd–Ni–Si. • GdNi{sub 6}Si{sub 6}, GdNi{sub 6.6}Si{sub 6} and Gd{sub 3}Ni{sub 11.5}Si{sub 4.2} show ferromagnetic-type ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Ce-Ni-Si system as a representative of the rare earth-Ni-Si family: Isothermal section and new rare-earth nickel silicides

The Ce-Ni-Si system has been investigated at 870/1070 K by X-ray and microprobe analyses. The existence of the known compounds, i.e.: Ce{sub 2}Ni{sub 15.8}Si{sub 1.2} (Th{sub 2}Ni{sub 17}-type), Ce{sub 2}Ni{sub 15-14}Si{sub 2-3} (Th{sub 2}Zn{sub 17}-type), CeNi{sub 8.6}Si{sub 2.4} (BaCd{sub 11}-type), CeNi{sub 8.8}Si{sub 4.2} (LaCo{sub 9}Si{sub 4}-type), CeNi{sub 6}Si{sub 6} (CeNi{sub 6}Si{sub 6}-type), CeNi{sub 5}Si{sub 1-0.3} (TbCu{sub 7}-type), CeNi{sub 4}Si (YNi{sub 4}Si-type), CeNi{sub 2}Si{sub 2} (CeGa{sub 2}Al{sub 2}-type), Ce{sub 2}Ni{sub 3}Si{sub 5} (U{sub 2}Co{sub 3}Si{sub 5}-type), Ce{sub 3}Ni{sub 6}Si{sub 2} (Ce{sub 3}Ni{sub 6}Si{sub 2}-type), Ce{sub 3}Ni{sub 4}Si{sub 4} (U{sub 3}Ni{sub 4}Si{sub 4}-type), CeNiSi{sub 2} (CeNiSi{sub 2}-type), ~CeNi{sub 1.3}Si{sub 0.7} (unknown type structure), Ce{sub 6}Ni{sub 7}Si{sub 4} (Pr{sub 6}Ni{sub 7}Si{sub 4}-type), CeNiSi (LaPtSi-type), CeNi{sub 0.8-0.3}Si{sub 1.2-1.7} (AlB{sub 2}-type), ~Ce{sub 2}Ni{sub 2}Si (unknown type structure), ~Ce{sub 4.5}Ni{sub 3.5}Si{sub 2} (unknown type structure), Ce{sub 15}Ni{sub 7}Si{sub 10} (Pr{sub 15}Ni{sub 7}Si{sub 10}-type), Ce{sub 5}Ni{sub 1.85}Si{sub 3} (Ce{sub 5}Ni{sub 1.85}Si{sub 3}-type), Ce{sub 6}Ni{sub 1.4}Si{sub 3.4} (Ce{sub 6}Ni{sub 1.67}Si{sub 3}-type), Ce{sub 7}Ni{sub 2}Si{sub 5} (Ce{sub 7}Ni{sub 2}Si{sub 5}-type) and Ce{sub 3}NiSi{sub 3} (Y{sub 3}NiSi{sub 3}-type) has been confirmed in this section. Moreover, the type structure has been determined for ~Ce{sub 2}Ni{sub 2}Si (Mo{sub 2}NiB{sub 2}-type Ce{sub 2}Ni{sub 2.5}Si{sub 0.5}) and ~Ce{sub 4.5}Ni{sub 3.5}Si{sub 2} (W{sub 3}CoB{sub 3}-type Ce{sub 3}Ni{sub 3-2.7}Si{sub 1-1.3}) and new ternary phases Ce{sub 2}Ni{sub 6.25}Si{sub 0.75} (Gd{sub 2}Co{sub 7}-type), CeNi{sub 7-7.6}Si{sub 6-5.4} (GdNi{sub 7}Si{sub 6}-type) and ~Ce{sub 27}Ni{sub 42}Si{sub 31} (unknown type structure) have been identified in this system. Quasi-binary phases, solid solutions, were detected at 870/1070 K for CeNi{sub 5}, CeNi{sub 3} and CeSi{sub 2}; while no appreciable solubility was observed for the other binary compounds of the Ce-Ni-Si system. As a prolongation of Rare Earth-Ni-Si system’s isostructural rows, LaNi{sub 7}Si{sub 6} and YNi{sub 6.6}Si{sub 6.1} (GdNi{sub 7}Si{sub 6}-type), ScNi{sub 6}Si{sub 6} (YCo{sub 6}Ge{sub 6}-type), NdNi{sub 6}Si{sub 6} (YNi{sub 6}Si{sub 6}-type), (Tb, Ho){sub 2}Ni{sub 15}Si{sub 2} (Th{sub 2}Zn{sub 17}-type), Nd{sub 2}Ni{sub 2.3}Si{sub 0.7} and Sm{sub 2}Ni{sub 2.2}Si{sub 0.8} (Mo{sub 2}NiB{sub 2}-type), Nd{sub 3}Ni{sub 2.55}Si{sub 1.45} (W{sub 3}CoB{sub 3}-type) and (Tb, Dy){sub 7}Ni{sub 50}Si{sub 19} (Y{sub 7}Ni{sub 49}Si{sub 20}-type) compounds were synthesized and investigated. Magnetic properties of the CeNi{sub 6}Si{sub 6}, CeNi{sub 7}Si{sub 6}, CeNi{sub 8.8}Si{sub 4.2}, Ce{sub 6}Ni{sub 7}Si{sub 4}, CeNi{sub 5}Si, Ce{sub 2}Ni{sub 2.5}Si{sub 0.5}, Nd{sub 2}Ni{sub 2.3}Si{sub 0.7} and Dy{sub 7}Ni{sub 50}Si{sub 19} compounds have also been investigated and are presented here. - Highlights: • Ce-Ni-Si isothermal section was obtained at 870/1070 K. • Twenty one known ternary cerium nickel silicides were confirmed in Ce-Ni-Si. • Five new cerium nickel silicides were detected in Ce-Ni-Si. • Eleven new rare earth nickel silicides were detected in R-Ni-Si. • Magnetic properties of eight rare earth nickel silicides were investigated.

36 MATERIALS SCIENCE↗

Microstructural evolution of a MCrAlY coating upon isothermal annealing

The microstructural evolution of a freestanding {gamma} + {beta} NiCoCrAlY coating, as deposited by electron beam physical vapor deposition, was studied following isothermal annealing at 1373 K. Electron backscatter diffraction (EBSD) was used to characterize the crystallographic texture, grain and phase boundary population and the size and distribution of the grains in the coating as a function of annealing time. The as-deposited coating consisted of small equiaxed grains near the bottom, and large columnar grains near the surface of the coating. A phase separation process inside the columnar grains resulted in a local microstructure consisting of a periodic arrangement of {gamma} and {beta} lamellae, linked to each other according to the Kurdjumov-Sachs orientation relationship. Upon annealing, equiaxed-shaped grains formed within the coating at the expense of the columnar grains. The formation of the equiaxed grains corresponded with an increase of the total interface length per unit area in the coating. Upon prolonged annealing, growth of the equiaxed grains occurred according to a power law with a time exponent n of 2.

36 MATERIALS SCIENCE↗

Structural characterization and dehydration kinetics of Kirka inderite mineral: Application of non-isothermal models

Coats-Redfern, Arrhenius, Ozawa, Kissinger, and Doyle non-isothermal kinetic models were used to calculate the dynamic kinetic parameters for dehydration reaction of Mg-borate mineral, inderite (Kirka - Turkey) based on thermogravimetric analysis, derivative thermogravimetric analysis and differential thermal analysis. Dehydration experiments were carried out at different heating rates of 2, 5, 10, 15, and 20 deg. C/min in a pure nitrogen atmosphere. Structural and morphological properties have been characterized by X-Ray diffraction, Fourier transform-infrared spectroscopy, Scanning electron microscopy-energy dispersive spectroscopy, and Inductively coupled plasma-optical emission spectroscopy techniques.

36 MATERIALS SCIENCE↗

Graphical representation for isothermal kinetics of non-equilibrium grain-boundary segregation

A model of non-equilibrium grain-boundary segregation of solute is expressed with graphs for the isothermal aging at various temperatures after quenching from a solution temperature. It is found from the graphical representations that when the samples are aged for a certain time at various temperatures there is a maximum value in the segregation concentration at a certain temperature. The aging time is equal or close to the critical time of non-equilibrium segregation corresponding to this temperature. This finding is experimentally confirmed with sulfur in an Ni-base superalloy with the aid of Auger electron spectroscopy. As an application of the new finding, a mechanism for intermediate temperature embrittlement of alloys is suggested and identified experimentally with tension tests of the superalloy. - Research Highlights: {yields} A peak of solute segregation emerges at a temperature when aging for a certain time at various temperatures after quenching. {yields} The aging time is equal or close to the critical time of segregation at this temperature. {yields} This finding is experimentally confirmed in an Ni-Cr-Fe superalloy. {yields} A mechanism for intermediate temperature embrittlement of alloys is proposed.

36 MATERIALS SCIENCE↗

Phase decomposition in an Fe-40 at.% Cr alloy after isothermal aging and its effect on hardening

The phase decomposition process of an Fe-40 at.% Cr alloy was studied after isothermal aging at 475 and 500 deg. C using a high-resolution transmission electron microscope, as well as hardness measurements. High-resolution transmission electron microscope observations showed that the hardening behavior is associated with the formation of the nanometric coherent decomposed Cr-rich and Fe-rich phases with irregular shape and interconnected as expected for a spinodally-decomposed alloy. As the aging progressed, coherent rounded Cr-rich phase precipitates were observed in the Fe-rich phase matrix. The coarsening process of the Cr-rich phase was observed for aging times up to 750 h. Nevertheless, no decrease in hardness with time was observed because of the nanometric size of the Cr-rich phase, less than 10 nm. Aging hardening was higher at 500 deg. C because of the higher decomposition kinetics. - Research Highlights: {yields} Spinodally-decomposed phases showed an interconnected and irregular shape in aged Fe-Cr alloy. {yields} Further aging promoted the formation of nanometric coherent rounded Cr-rich precipitates. {yields} Nanometric Cr-rich phases are responsible for the age hardening. {yields} Coarsening process of these nanometric Cr-rich precipitates caused no decrease in hardness.

36 MATERIALS SCIENCE↗

In-situ characterization of transformation plasticity during an isothermal austenite-to-bainite phase transformation

This paper elucidates the stress-induced variant selection process during the isothermal austenite-to-bainite phase transformation in a tool steel. Specifically, a thorough set of experiments combining electron backscatter diffraction and in-situ digital image correlation (DIC) was carried out to establish the role of superimposed stress level on the evolution of transformation plasticity (TP) strains. The important finding is that TP increases concomitant with the superimposed stress level, and strain localization accompanies phase transformation at all stress levels considered. Furthermore, TP strain distribution within the whole material becomes more homogeneous with increasing stress, such that fewer bainitic variants are selected to grow under higher stresses, yielding a more homogeneous strain distribution. In particular, the bainitic variants oriented along [101] and [201] directions are favored to grow parallel to the loading axis and are associated with large TP strains. Overall, this very first in-situ DIC investigation of the austenite-to-bainite phase transformation in steels evidences the clear relationship between the superimposed stress level, variant selection, and evolution of TP strains. - Highlights: Black-Right-Pointing-Pointer Local variations of strain were observed by DIC throughout the phase transformation. Black-Right-Pointing-Pointer The study clearly established the role of the stress-induced variant selection. Black-Right-Pointing-Pointer Variant selection is a key parameter that governs distortion.

36 MATERIALS SCIENCE↗

Effect of cold working and isothermal aging on the precipitation of sigma phase in 2205 duplex stainless steel

A comprehensive understanding of the formation of the sigma phase resulting from the eutectoid reaction ({delta} {yields} {sigma} + {gamma}{sub 2}) is required. The kinetics necessary for the eutectoid reaction are closely related to the amount of plastic deformation in DSS. This work investigates the microstructural evolution of the {sigma} phase in a 22Cr-5Ni SAF 2205 DSS after subsequent plastic deformation and isothermal aging. The precipitation of the {sigma} phase resulted from the higher driving force for precipitating intermetallic compounds and the higher diffusion rate of their elements by cold-rolling, as well as the sufficient supply of molybdenum. The maximum amount of {sigma} phase precipitation remarkably increased with an increasing cold deformation, as compared with the non-cold-rolled materials. - Highlights: Black-Right-Pointing-Pointer The microstructural evolution of sigma phase has been characterized. Black-Right-Pointing-Pointer The chemical compositions of sigma phases were analyzed using TEM-EDX. Black-Right-Pointing-Pointer The effect of cold deformation on the precipitation of sigma phase was investigated.

36 MATERIALS SCIENCE↗

Initial precipitation and hardening mechanism during non-isothermal aging in an Al–Mg–Si–Cu 6005A alloy

The characterization of precipitation and hardening mechanism during non-isothermal aging had been investigated using high resolution transmission electron microscopy for an Al–Mg–Si–Cu 6005A alloy. It was proposed that the needle-shaped β″ precipitates with a three-dimension coherency strain-field and an increased number density in the Al matrix provided the maximum strengthening effect for the Al–Mg–Si–Cu 6005A alloy. Simultaneously, it was also found that the formation and evolution of clusters in the early precipitation were associated with the vacancy binding energy, during which Si atoms played an important role in controlling the numbers density of Mg/Si co-clusters, and the excess Si atoms provided the increased number of nucleation sites for the subsequent precipitates to strengthen and improve the precipitation rate. Finally, based on the experimental observation and theoretical analysis, the precipitation sequence during the early precipitation in the Al–Mg–Si–Cu 6005A alloy was proposed as: supersaturated solid solution → Si-vacancy pairs, Mg-vacancy pairs and Mg clusters → Si clusters, and dissolution of Mg clusters → Mg atoms diffusion into the existing Si clusters → Mg/Si co-clusters → GP zone. - Highlights: • β″ precipitates provide the maximum strengthening effect for the 6005A alloy. • Si atoms play an important role in controlling the numbers of Mg/Si co-clusters. • The early aging sequence is deduced based on the solute-vacancy binding energy.

36 MATERIALS SCIENCE↗