Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Monitoring the Folding Kinetics of a β-Hairpin by Time-Resolved IR Spectroscopy in Silico

One of the most fundamental problems in modern biochemistry is protein folding. Time-resolved infrared (IR) spectroscopy in the amide I region is commonly used to monitor folding kinetics. However, associated atomic detail information on the folding mechanism requires simulations. In atomistic simulations structural order parameters are typically used to follow the folding process along the simulated trajectories. But, a rigorous test of the reliability of the mechanisms found in the simulations requires calculation of the time-dependent experimental observable, i.e., in the present case the IR signal in the amide I region. Here, we combine molecular dynamics simulation with a mixed quantum mechanics/molecular mechanics theoretical methodology, the Perturbed Matrix Method, in order to characterize the folding of a -hairpin peptide, through modeling the time-dependence of the amide I IR signal. The kinetic and thermodynamic data (folding and unfolding rate constants, and equilibrium folded- and unfolded-state probabilities) obtained from the fit of the calculated signal are in good agreement with the available experimental data [Xu et al. J. Am. Chem. Soc. 2003, 125, 15388 15394]. Furthermore, to the best of our knowledge, this is the first report of the simulation of the time-resolved IR signal of a complex process occurring on a long (microsecond) time scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

In Situ Attenuated Total Reflectance Infrared Spectroelectrochemistry (ATR-IR-SEC) for the Characterization of Molecular Redox Processes on Surface-Proximal Doped Silicon ATR Crystal Working Electrodes

In situ mid-infrared spectroscopy is a powerful technique for understanding the mechanism of CO 2 reduction (CO 2 R) catalysts because it enables the direct detection of catalytic intermediates and products. Moreover, spectroelectrochemistry (SEC), the coupling of spectroscopy with electrochemistry, allows spectroscopic changes to be correlated with applied potentials to reveal potential-dependent intermediates that are often relevant to photoelectrochemical reactions. Hybrid photoelectrodes, comprised of a narrow bandgap semiconductor, like silicon (Si), with a covalently-linked molecular catalyst, are a promising platform for sunlight-driven catalysis, but characterization of the catalytic mechanism(s) is challenging under photoelectrochemical conditions, particularly when the catalyst is present in monolayer or less concentrations. Here, we have developed a new strategy to use multiple-reflection attenuated total reflectance IR spectroscopy (ATR-IR) coupled with electrochemistry to characterize catalysts directly integrated with a semiconductor surface under applied potential. We show that by surface-proximal n-type or p-type doping of the top ~100-200 nm of the crystal surface, Si ATR crystals can be used simultaneously as the internal reflection element and semiconductor working electrode for ATR-IR-SEC measurements. The surface-proximal doping strategy yields a quasi-equipotential surface with excellent infrared transparency that would have been compromised by free carrier absorption if the crystal was uniformly doped. This approach permits the catalytically-active functionalized surface to be directly probed without modification and overcomes signal-to-noise limitations of other strategies that use separately deposited working electrodes on Si ATR crystals. Proof-of-concept ATR-IR-SEC spectra were collected during the reduction and oxidation of monolayers of Re- and Ru-based transition metal carbonyl complexes, respectively, verifying the viability of the technique to probe redox processes associated with CO 2 R catalysts on Si electrode surfaces with high sensitivity.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Distinct Mechanisms and Hydricities of Cp*Ir-Based CO 2 Hydrogenation Catalysts in Basic Water

Transition metal-catalyzed reversible hydrogenation of CO 2 to formate in aqueous solutions under ambient conditions is an attractive environmentally friendly strategy for the storage and transportation of H 2 in a liquid chemical form. Here, mechanistic details for the CO 2 hydrogenation by a series of pentamethylcyclopentadienyl iridium(III) (Cp*Ir) complexes with picolinamidate ligands are investigated through density functional theory and kinetic isotope effects (KIEs) calculations. Additionally, adopting a speciation approach at a pH of 8.2, CO 2 hydrogenation mechanisms of 37 distinct protonation states and conformers of Cp*Ir type complexes are investigated. This imposes a challenging test for the computational modeling in terms of providing a consistent correlation with experimental kinetics and KIE studies of multiple catalysts instead of a single complex. Overall, H 2 heterolysis to generate an iridium hydride intermediate was demonstrated to be the rate determining step, which proceeds via distinct pathways depending on the stereoelectronic properties of the ligand. A peculiar iridium dihydride route was also uncovered, which could be optimized to accelerate the H 2 heterolysis. We have further computed the thermodynamic and kinetic hydricities of 74 complexes with [Cp*Ir(L)(H)] q ( q = -1, 0, 1 depending on the ligand charge by deprotonation or protonation events) general formula. Hydricity values do not show any noticeable correlation with the thermodynamics (Δ G ) of [Cp*Ir(L)(HCO 2 – )] formation but exhibit linear correlation with the kinetics (Δ G ‡ ) of electrophilic CO 2 attack to iridium hydride species, especially when the charges and local structural effects of the metal hydrides are considered. Insights gained in this study on (i) the factors determining the preferred pathway for the rate-limiting H 2 heterolysis step, (ii) the correlation between thermodynamic hydricity and the kinetics of CO 2 insertion to iridium hydride species, and (iii) mechanistic analysis via combination of free energy profiles and KIE studies for a series of iridium catalysts will provide guidelines for the design of next-generation catalysts for the reversible H 2 storage through CO 2 utilization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

CO Oxidation on Ir 1 /TiO 2 : Resolving Ligand Dynamics and Elementary Reaction Steps

Identifying the rate-controlling steps and the evolution of the ligand environment throughout the catalytic cycle on supported single-atom catalysts is crucial to bridge the gap between heterogeneous and homogeneous catalysis. Here we identified the rate-controlling elementary steps for CO oxidation on TiO 2 -supported Ir single atoms and isolated the corresponding intermediate Ir complexes. Kinetic measurements, operando spectroscopy, and quantum-chemical calculations indicate that the reaction mechanism has two kinetically relevant steps, CO adsorption/oxidation and O 2 dissociation. By varying the reaction conditions, three Ir 1 complexes (states) along the reaction cycle were isolated and identified using in situ spectroscopy. Furthermore, we show that all the intermediate Ir 1 states share a common CO ligand that does not turn over. Finally, this study provides atomic level details on the active, intermediate complexes and reaction cycle of supported single-metal-atom catalysts, thereby offering future possibilities to control the ligand environment and reactivity.

36 MATERIALS SCIENCE↗

The Atomic Structural Dynamics of γ-Al 2 O 3 Supported Ir–Pt Nanocluster Catalysts Prepared from a Bimetallic Molecular Precursor: A Study Using Aberration-Corrected Electron Microscopy and X-ray Absorption Spectroscopy

This study describes a prototypical, bimetallic heterogeneous catalyst: compositionally well-defined Ir–Pt nanoclusters with sizes in the range of 1–2 nm supported on γ-Al 2 O 3 . Deposition of the molecular bimetallic cluster [Ir 3 Pt 3 (μ-CO) 3 (CO) 3 (η-C 5 Me 5 ) 3 ] on γ-Al 2 O 3 , and its subsequent reduction with hydrogen, provides highly dispersed supported bimetallic Ir–Pt nanoparticles. Using spherical aberration-corrected scanning transmission electron microscopy (Cs-STEM) and theoretical modeling of synchrotron-based X-ray absorption spectroscopy (XAS) measurements, our studies provide unambiguous structural assignments for this model catalytic system. The atomic resolution Cs-STEM images reveal strong and specific lattice-directed strains in the clusters that follow local bonding configurations of the γ-Al 2 O 3 support. Combined nanobeam diffraction (NBD) and high-resolution transmission electron microscopy (HRTEM) data suggest the polycrystalline γ-Al 2 O 3 support material predominantly exposes (001) and (011) surface planes (ones commensurate with the zone axis orientations frequently exhibited by the bimetallic clusters). Here, the data reveal that the supported bimetallic clusters exhibit complex patterns of structural dynamics, ones evidencing perturbations of an underlying oblate/hemispherical cuboctahedral cluster–core geometry with cores that are enriched in Ir (a result consistent with models based on surface energetics, which favor an ambient cluster termination by Pt) due to the dynamical responses of the M–M bonding to the specifics of the adsorbate and metal–support interactions. Taken together, the data demonstrate that strong temperature-dependent charge-transfer effects occur that are likely mediated variably by the cluster–support, cluster–adsorbate, and intermetallic bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Direct Observation by Rapid-Scan FT-IR Spectroscopy of Two-Electron-Reduced Intermediate of Tetraaza Catalyst [Co II N 4 H(MeCN)] 2+ Converting CO 2 to CO

In the search for the two-electron-reduced intermediate of the tetraaza catalyst [Co II N 4 H(MeCN)] 2+ (N 4 H = 2,12-dimethyl-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),2,11,13,15-pentaene) for CO 2 reduction and elementary steps that result in the formation of CO product, rapid-scan FT-IR spectroscopy of the visible-light-sensitized catalysis, using Ir(ppy) 3 in wet acetonitrile (CD 3 CN) solution, led to the observation of two sequential intermediates. The initially formed one-electron-reduced [Co I N 4 H] + --CO 2 adduct was converted by the second electron to a transient [Co I N 4 H] + --CO 2 - complex that spontaneously converted CO 2 to CO in a rate-limiting step on the second time scale in the dark under regeneration of the catalyst (room temperature). The macrocycle IR spectra of the [Co I N 4 H] + --CO 2 - complex and the preceding one-electron [Co I N 4 H] + --CO 2 intermediate show close similarity but distinct differences in the carboxylate modes, indicating that the second electron resides mainly on the CO 2 ligand. Vibrational assignments are corroborated by 13 C isotopic labeling. The structure and stability of the two-electron-reduced intermediate derived from the time-resolved IR study are in good agreement with recent predictions by DFT electronic structure calculations. This is the first observation of an intermediate of a molecular catalyst for CO 2 reduction during the bond-breaking step producing CO. The reaction pathway for the Co tetraaza catalyst uncovered here suggests that the competition between CO 2 reduction and proton reduction of a macrocyclic multi-electron catalyst is steered toward CO 2 activation if the second electron is directly captured by an adduct of CO 2 and the one-electron-reduced catalyst intermediate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electrospun Ti–Zr Oxide Heterostructures Enable Strongly Anchored Ultralow-Ir Anodes for Durable Acidic Oxygen Evolution

Proton-exchange-membrane water electrolysis (PEMWE) requires acidic oxygen-evolution-reaction (OER) anodes that combine high activity, high durability, and low Ir loading. Here, we report a Ti-Zr composite electrospun oxide (ESO) nanorod support that enables ultralow-Ir anodes for high-performance PEMWE. Zr-containing Ti oxide heterostructures stabilize anatase-rich TiO2, tune the local oxygen-coordination environment, and strengthen interfacial anchoring of IrOx under acidic anodic conditions. The electrospun nanorod network further creates an open, mechanically coherent catalyst layer that improves Ir utilization, ionomer penetration, and mass transport. At an anode loading of 0.2 mgIr cm-2, the optimized Ir/TiZr20-ESO anode delivers a PEMWE mass activity of 0.99 A mgIr-1 at 1.45 V, 28.3 and 43.0 times higher than commercial Ir black and commercial IrO2/TiO2, respectively. The same anode reaches 3.0 and 4.0 A cm-2 at 1.75 and 1.83 V, respectively, and sustains 2000 h operation at 2.0 A cm-2. Also, accelerated stress tests up to 525 hours over 31,500 cycles confirm promising long-term durability, with an insignificant performance decay of 0.4 μV per cycle. Density functional theory indicates that the Ti-Zr oxide heterostructure suppresses Ti demetallation and strengthens IrO2 interfacial binding, rationalizing the improved high-current-density stability.

25 ENERGY STORAGE↗

Novel FT-IR Microspectroscopic Census of Simple Starch Granules for Octenyl Succinate Ester Modification

Fourier transform infrared (FT-IR) microspectroscopy was used to investigate reaction homogeneity of octenyl succinic anhydride modification on waxy maize starch and detect uniformity of blends of modified and native starches. For the first time, the level and uniformity of chemical substitution on individual starch granules were analyzed by FT-IR microspectroscopy. More than 100 starch granules of each sample were analyzed one by one by FT-IR microspectroscopy. In comparison to the native starch, modified starch had two additional bands at 1723 and 1563 cm{sup -1}, indicative of ester formation in the modified starch. For the 3% modification level, the degree of substitution (DS) was low (0.019) and the distribution of the ester group was not uniform among starch granules. For the modified starch with DS of 0.073, 99% of individual starch granules had a large carbonyl band area, indicating that most granules were modified to a sufficient extent that the presence of their carbonyl ester classified them individually as being modified. However, the octenyl succinate concentration varied between granules, suggesting that the reaction was not uniform. When modified starch (DS = 0.073) was blended with native starch (3:7, w/w) to achieve a mixture with an average DS of 0.019, FT-IR microspectroscopy was able to detect heterogeneity of octenyl succinate in the blend and determine the ratio of the modified starch to the native starch granules.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identification of the active complex for CO oxidation over single-atom Ir-on-MgAl2O4 catalysts

Supported single atoms provide the best utilization of noble metals and provide an opportunity to design new heterogeneous catalysts. However, identification of the active single atoms structure is required for understanding the reaction mechanism and guiding catalyst design. We used in-situ infrared spectroscopy, in-operando x-ray adsorption spectroscopy and quantum chemical calculations to show that Ir(CO)/MgAl2O4 is the active single atom complex for low temperature CO oxidation and Ir(CO)(O) is the most stable intermediate. In contrast to poisoning of nanoparticles by CO, the formation of Ir(CO) on single atoms results in a different reaction mechanism and high activity for low temperature CO oxidation. This is due to the ability of single atoms to coordinate with multiple ligands, where CO, in Ir(CO)(O), acts as a facilitator by lowering the reaction barrier between gas phase CO and adsorbed O (Eley-Rideal mechanism).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New insulating antiferromagnetic quaternary iridates M La 10 Ir 4 O 24 (M=Sr, Ba)

Recently, oxides of Ir 4+ have received renewed attention in the condensed matter physics community, as it has been reported that certain iridates have a strongly spin-orbital coupled (SOC) electronic state, J eff = ½, that defines the electronic and magnetic properties. The canonical example is the Ruddlesden-Popper compound Sr 2 IrO 4 , which has been suggested as a potential route to a new class of high temperature superconductor due to the formal analogy between J eff = ½ and the S = ½ state of the cuprate superconductors. The quest for other iridium oxides that present tests of the underlying SOC physics is underway. In this spirit, here we report the synthesis and physical properties of two new quaternary tetravalent iridates, M La 10 Ir 4 O 24 (M = Sr, Ba). The crystal structure of both compounds features isolated IrO 6 octahedra in which the electronic configuration of Ir is d 5 . As a result, both compounds order antiferromagnetically despite the lack of obvious superexchange pathways, and resistivity measurement shows that SrLa 10 Ir 4 O 24 is an insulator.

36 MATERIALS SCIENCE↗

Elastic, magnetic and electronic properties of iridium phosphide Ir 2 P

Cubic (space group: Fm3¯m) iridium phosphide, Ir 2 P, has been synthesized at high pressure and high temperature. Angle-dispersive synchrotron X-ray diffraction measurements on Ir 2 P powder using a diamond-anvil cell at room temperature and high pressures (up to 40.6 GPa) yielded a bulk modulus of B 0 = 306(6) GPa and its pressure derivative B 0 '= 6.4(5). Such a high bulk modulus attributed to the short and strongly covalent Ir-P bonds as revealed by first – principles calculations and three-dimensionally distributed [IrP 4 ] tetrahedron network. Indentation testing on a well–sintered polycrystalline sample yielded the hardness of 11.8(4) GPa. Relatively low shear modulus of ~64 GPa from theoretical calculations suggests a complicated overall bonding in Ir 2 P with metallic, ionic, and covalent characteristics. Additionally, a spin glass behavior is indicated by magnetic susceptibility measurements.

36 MATERIALS SCIENCE↗

IR-Live: fabrication of a low-cost plastic microfluidic device for infrared spectromicroscopy of living cells

Water is a strong mid-infrared absorber, which has hindered the full exploitation of label-free and non-invasive infrared (IR) spectromicroscopy techniques for the study of living biological samples. To overcome this barrier, many researchers have built sophisticated fluidic chambers or microfluidic chips wherein the depth of the liquid medium in the sample compartment is limited to 10 μm or less. We report an innovative and simple way to fabricate plastic devices with infrared transparent view-ports enabling infrared spectromicroscopy of living biological samples; therefore the device is named “IR-Live”. Advantages of this approach include lower production costs, a minimal need to access a micro-fabrication facility, and unlimited mass or waste exchange for the living samples surrounding the view-port area. We demonstrate that the low-cost IR-Live in combination with microfluidic perfusion techniques enables long term (>60 h) cell culture, which broadens the capability of IR spectromicroscopy for studying living biological samples. To illustrate this, we first applied the device to study protein and lipid polarity in migrating REF52 fibroblasts by collecting 2-dimensional spectral chemical maps at a micrometer spatial resolution. Then, we demonstrated the suitability of our approach to study dynamic cellular events by collecting a time series of spectral maps of U937 monocytes during the early stage of cell attachment to a bio-compatible surface.

47 OTHER INSTRUMENTATION↗

Luminescence properties of SiO{sub x}N{sub y} irradiated by IR laser 808 nm: The role of Si quantum dots and Si chemical environment

We investigated optical, structural, and chemical properties of SiO{sub x}N{sub y} layers irradiated by CW IR laser during a time lapse of few milliseconds. We observed tunable photoluminescence signal at room temperature in the range 750-950 nm, without Si/SiO{sub 2} phase separation, depending on the IR laser power irradiation. Furthermore, no photoluminescence signal was recorded when the IR laser power density was high enough to promote phase separation forming Si quantum dots. By chemical analysis the source of the luminescence signal has been identified in a change of silicon chemical environment induced by IR laser annealing inside the amorphous matrix.

36 MATERIALS SCIENCE↗

IR mass-resolved spectroscopy of complexes without chromophore: Cyclohexanol·(H{sub 2}O){sub n}, n = 1–3 and cyclohexanol dimer

Mass-resolved IR spectra of cyclohexanol-water clusters and cyclohexanol dimer in supersonic expansions are presented for the first time. A combination of ns and fs IR lasers made possible recording such spectra without inclusion of a chromophore or a messenger atom. Furthermore, employment of the recently developed IR{sup 3} technique [I. León, R. Montero, F. Castaño, A. Longarte, and J. A. Fernández, J. Phys. Chem. A 116, 6798 (2012)] allowed us to discriminate between the contribution of different species to the IR spectrum. Comparison of the experimental spectra with the predictions at the M06-2X/6-311++G(d,p) calculation level confirmed the assignment of the spectrum of cyclohexanol·(H{sub 2}O){sub 1} to a structure in which water is accepting a proton from cyclohexanol's OH group, and those of cyclohexanol·(H{sub 2}O){sub 2,3} to structures with cyclic hydrogen bond networks. A comparative analysis of the results obtained with those reported on other aromatic alcohols is also offered.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Morin transition temperature in (0001)-oriented α-Fe{sub 2}O{sub 3} thin film and effect of Ir doping

The structural properties and Morin transition in c-plane-oriented α-Fe{sub 2}O{sub 3} and Ir-doped α-Fe{sub 2}O{sub 3} thin films have been investigated. The enhancement of the Morin transition temperature (T{sub M}) in α-Fe{sub 2}O{sub 3} film by Ir doping has been demonstrated. The T{sub M} in the c-plane-oriented α-Fe{sub 2}O{sub 3} thin film was determined from the temperature-dependent in-plane magnetization and change of coercivity (H{sub c}); this T{sub M} value was found close to that of bulk α-Fe{sub 2}O{sub 3}. The spin directions of non-doped and Ir-doped α-Fe{sub 2}O{sub 3} at room temperature were also estimated from conversion electron Mössbauer spectroscopy measurements. We confirmed that Ir doping dramatically enhances the T{sub M} of α-Fe{sub 2}O{sub 3} thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A DFT study on the adsorption of CO and CO{sub 2} molecules on Pt{sub 4} and Ir{sub 4} clusters

We analyze the electronic structure and adsorption binding energy of CO and CO{sub 2} molecules adsorbed on Ir{sub 4} and Pt{sub 4} clusters by using Density functional theory (DFT). It is found that the Ir{sub 4} cluster has more adsorption binding energy than Pt{sub 4} cluster. We show that the Ir and Ir - supported materials are good catalytic materials and could be useful for gas sensor applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Tunable parametric amplifier for mid-IR application based on highly nonlinear chalcogenide material

A novel dispersion controlling technique towards attaining tunable parametric amplification based on highly nonlinear photonic crystal fibers has been investigated. Selective infiltration of the liquid into the air-holes leads to alter the zero dispersion wavelength towards a broader parametric gain in the mid-IR spectrum by only changing the temperature of the system externally. The dispersion profile specially the zero dispersion wavelengths can be well tuned around the pumping wavelength, thereby generating several hundred nanometer parametric bandwidth in near-IR to mid-IR region. The tunability of the photonic crystal fibers (PCFs) can also be useful for generating new frequencies in both the red- and blue-shifted regions far from the pumping wavelength. Our numerical calculations reveal that we could achieve very wide band fiber optic parametric amplifier both in the communication wavelength and in the IR region. Also two different types of PCFs can be used to achieve same broadband wavelength spectra however with a tradeoff between the fiber lengths and pump power.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electronic structure and thermoelectric properties of pnictogen-substituted ASn{sub 1.5}Te{sub 1.5} (A = Co, Rh, Ir) skutterudites

Substituting group 14 and 16 elements on the pnictogen site in the skutterudite structure yields a class of valence-precise ternary AX{sub 1.5}Y{sub 1.5} compounds (A = Co, Rh, Ir, X = Sn, Ge, and Y = S, Se, Te), in which X and Y form an ordered sub-structure. Compared with unfilled binary skutterudites, pnictogen-substituted phases exhibit extremely low lattice thermal conductivity due to increased structural complexity. Here, we investigate the role of the transition metal species in determining the electronic structure and transport properties of ASn{sub 1.5}Te{sub 1.5} compounds with A = Co, Rh, Ir. Density functional calculations using fully ordered structures reveal semiconducting behavior in all three compounds, with the band gap varying from 0.2 to 0.45 eV. In CoSn{sub 1.5}Te{sub 1.5}, the electronic density of states near the gap is significantly higher than for A = Ir or Rh, leading to higher effective masses and higher Seebeck coefficients. Experimentally, Ir and Rh samples exhibit relatively large p-type carrier concentrations and degenerate semiconducting behavior. In contrast, CoSn{sub 1.5}Te{sub 1.5} shows mixed conduction, with n-type carriers dominating the Seebeck coefficient and light, high mobility holes dominating the Hall coefficient. zT values of up to 0.35 were obtained, and further improvement is expected upon optimization of the carrier concentration or with n-type doping.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗