SEARCH · Engineering Papers

Results for “INORGANIC COMPOUND”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

All sources NASA NTRS DOE OSTI

DOE OSTI2020

CO Oxidation Mechanisms on CoO x -Pt Thin Films

The reaction of CO and O 2 with submonolayer and multilayer CoO x films on Pt(111), to produce CO 2 , was investigated at room temperature in the mTorr pressure regime. Here, using operando ambient pressure X-ray photoelectron spectroscopy and high pressure scanning tunneling microscopy, as well as density functional theory calculations, we found that the presence of oxygen vacancies in partially oxidized CoO x films significantly enhances the CO oxidation activity to form CO 2 upon exposure to mTorr pressures of CO at room temperature. In contrast, CoO films without O-vacancies are much less active for CO 2 formation at RT, and CO only adsorbed in the form of carbonate species that are stable up to 260 °C. On submonolayer CoO x islands, the carbonates form preferentially at island edges, deactivating the edge sites for CO 2 formation, even while the reaction proceeds inside the islands. These results provide a detailed understanding of CO oxidation pathways on systems where noble metals such as Pt interact with reducible oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Probing Heterogeneous Charge Distributions at the α-Al 2 O 3 (0001)/H 2 O Interface

Unlike metal or semiconductor electrodes, the surface charge resulting from the protonation or deprotonation of insulating mineral oxides is highly localized and heterogeneous in nature. In this work the Stark active C≡N stretch of potassium thiocyanate is used as a molecular probe of the heterogeneity of the interfacial electrostatic potential at the α-Al 2 O 3 (0001)/H 2 O interface. Vibrational sum frequency generation (vSFG) measurements performed in the OH stretching region suggest that thiocyanate species organize interfacial water similarly to halide ions. Changes in the electrostatic potential are then tracked via Stark shifts of the vibrational frequency of the thiocyanate stretch. Our vSFG measurements show that we can simultaneously measure the vSFG response of SCN – ions experiencing charged and neutral surface sites. We assign local potentials of +308 and -154 mV to positively and negatively charged aluminol groups that are present at pH = 4 and pH = 10, respectively. Thiocyanate anions at positively charged surface sites and negatively charged surface sites and those participating in contact ion pairing adopt similar orientations and are oppositely oriented relative to thiocyanate ions near neutral surface sites. All four species followed Langmuir adsorption isotherms. Density functional theory–molecular dynamics (DFT-MD) simulations of SCN – near the neutral α-Al 2 O 3 (0001)/H 2 O interface show that the vSFG response in the C≡N stretch region originates from a SCN–H–O–Al complex, suggesting the surface site specificity of these experiments. To our knowledge this is the first spectroscopic measurement of local potentials associated with a heterogeneously charged surface. The ability to probe the evolution of local charges in situ could provide vital insight into many industrial, electrochemical, and geochemically relevant interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Absolute Templating of M(111) Cluster Surrogates by Galvanic Exchange

The precise preparation of monodisperse nanomaterials is among the most fundamental tasks in inorganic synthesis and materials science. Achieving this goal by galvanic exchange is hardly predictable, and often results in major structural changes and polydisperse mixtures. Here, taking advantage of the enhanced stability imparted by ambiphilic carbenes, we report and rationalize the absolute templating — the complete exchange of metals in a template — of group 11 clusters across the entire coinage metal family by means of galvanic exchange. We further delineate that these species provide a molecular model for better understanding the reduction of CO 2 at M(111) coinage metal surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Engineering Second Sphere Interactions in a Host–Guest Multicomponent Catalyst System for the Hydrogenation of Carbon Dioxide to Methanol

Many enzymes utilize interactions extending beyond the primary coordination sphere to enhance catalyst activity and/or selectivity. Such interactions could improve the efficacy of synthetic catalyst systems, but the supramolecular assemblies employed by biology to incorporate second sphere interactions are challenging to replicate in synthetic catalysts. Herein, a strategy is reported for efficiently manipulating outer sphere influence on catalyst reactivity by modulating host–guest interactions between a noncovalently encapsulated transitionmetal-based catalyst guest and a metal–organic framework (MOF) host. This composite consists of a ruthenium PNP pincer complex encapsulated in the MOF UiO-66 that is used in tandem with the zirconium oxide nodes of UiO-66 and a ruthenium PNN pincer complex to hydrogenate carbon dioxide to methanol. Due to the method used to incorporate the complexes in UiO-66, structure–activity relationships could be efficiently determined using a variety of functionalized UiO-66-X hosts. These investigations uncovered the beneficial effects of the ammonium functional group (i.e., UiO-66-NH 3 + ). Mechanistic experiments revealed that the ammonium functionality improved efficiency in the hydrogenation of carbon dioxide to formic acid, the first step in the cascade. Isotope effects and structure–activity relationships suggested that the primary role of the ammonium functionality is to serve as a general Brønsted acid. Importantly, the cooperative influence from the host was effective only with the functional group in close proximity to the encapsulated catalyst. Here, reactions carried out in the presence of molecular sieves to remove water highlighted the beneficial effects of the ammonium functional group in UiO-66-NH 3 + and resulted in a 4-fold increase in activity. As a result of the modular nature of the catalyst system, the highest reported turnover number (TON) (19 000) and turnover frequency (TOF) (9100 h –1 ) for the hydrogenation of carbon dioxide to methanol are obtained. Moreover, the reaction was readily recyclable, leading to a cumulative TON of 100 000 after 10 reaction cycles.

08 HYDROGEN↗

DOE OSTI2021

Formation of Surface Impurities on Lithium–Nickel–Manganese–Cobalt Oxides in the Presence of CO 2 and H 2 O

Surface impurities involving parasitic reactions and gas evolution contribute to the degradation of high Ni content LiNi x Mn y Co z O 2 (NMC) cathode materials. The transient kinetic technique of Temporal Analysis of Products (TAP), density functional theory, and infrared spectroscopy have been used to study the formation of surface impurities on varying nickel content NMC materials (NMC811, NMC622, NMC532, NMC433, NMC111) in the presence of CO 2 and H 2 O. CO 2 reactivity on a clean surface as characterized by CO 2 conversion rate in the TAP reactor follows the order: NMC811 > NMC622 > NMC532 > NMC433 > NMC111. The capacity of CO 2 uptake follows a different order: NMC532 > NMC433 > NMC622 > NMC811 > NMC111. Moisture pretreatment slows down the direct CO 2 adsorption process and creates additional active sites for CO 2 adsorption. Electronic structure calculations predict that the (012) surface is more reactive than the ($10\bar{1}4$) surface for CO 2 and H 2 O adsorption. CO 2 adsorption leading to carbonate formation is exothermic with formation of ion pairs. The average CO 2 binding energies on the different materials follow the CO 2 reactivity order. Water hydroxylates the (012) surface and surface OH groups favor bicarbonate formation. Water creates more active sites for CO 2 adsorption on the ($10\bar{1}4$) surface due to hydrogen bonding. The composition of surface impurities formed in ambient air exposure is dependent on water concentration and the percentage of different crystal planes. Different surface reactivities suggest that battery performance degradation due to surface impurities can be mitigated by precise control of the dominant surfaces in NMC materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Photoelectrochemical CO 2 Reduction toward Multicarbon Products with Silicon Nanowire Photocathodes Interfaced with Copper Nanoparticles

The development of photoelectrochemical systems for converting CO 2 into chemical feedstocks offers an attractive strategy for clean energy storage by directly utilizing solar energy, but selectivity and stability for these systems have thus been limited. Here, we interface silicon nanowire (SiNW) photocathodes with a copper nanoparticle (CuNP) ensemble to drive efficient photoelectrochemical CO 2 conversion to multicarbon products. This integrated system enables CO 2 -to-C 2 H 4 conversion with faradaic efficiency approaching 25% and partial current densities above 2.5 mA/cm 2 at -0.50 V vs RHE, while the nanowire photocathodes deliver 350 mV of photovoltage under 1 sun illumination. Under 50 h of continual bias and illumination, CuNP/SiNW can sustain stable photoelectrochemical CO 2 reduction. In conclusion, these results demonstrate the nanowire/catalyst system as a powerful modular platform to achieve stable photoelectrochemical CO 2 reduction and the feasibility to facilitate complex reactions toward multicarbons using generated photocarriers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Platinum Graphene Catalytic Condenser for Millisecond Programmable Metal Surfaces

Accelerating catalytic chemistry and tuning surface reactions require precise control of the electron density of metal atoms. In this work, nanoclusters of platinum were supported on a graphene sheet within a catalytic condenser device that facilitated electron or hole accumulation in the platinum active sites with negative or positive applied potential, respectively. The catalytic condenser was fabricated by depositing on top of a p-type Si wafer an amorphous HfO 2 dielectric (70 nm), on which was placed the active layer of 2–4 nm platinum nanoclusters on graphene. A potential of ±6 V applied to the Pt/graphene layer relative to the silicon electrode moved electrons into or out of the active sites of Pt, attaining charge densities more than 1% of an electron or hole per surface Pt atom. At a level of charge condensation of ±10% of an electron per surface atom, the binding energy of carbon monoxide to a Pt(111) surface was computed via density functional theory to change 24 kJ mol –1 (0.25 eV), which was consistent with the range of carbon monoxide binding energies determined from temperature-programmed desorption (ΔBE CO of 20 ± 1 kJ mol –1 or 0.19 eV) and equilibrium surface coverage measurements (ΔBE CO of 14 ± 1 kJ mol –1 or 0.14 eV). Impedance spectroscopy indicated that Pt/graphene condensers with potentials oscillating at 3000 Hz exhibited negligible loss in capacitance and charge accumulation, enabling programmable surface conditions at amplitudes and frequencies necessary to achieve catalytic resonance.

Inorganic carbon compounds↗

DOE OSTI2023

Well-Defined Iron Sites in Crystalline Carbon Nitride

Carbon nitride materials can be hosts for transition metal sites, but Mössbauer studies on iron complexes in carbon nitrides have always shown a mixture of environments and oxidation states. Here we describe the synthesis and characterization of a crystalline carbon nitride with stoichiometric iron sites that all have the same environment. The material (formula C 6 N 9 H 2 Fe 0.4 Li 1.2 Cl, abbreviated PTI/FeCl 2 ) is derived from reacting poly(triazine imide)·LiCl (PTI/LiCl) with a low-melting FeCl 2 /KCl flux, followed by anaerobic rinsing with methanol. X-ray diffraction, X-ray absorption and Mössbauer spectroscopies, and SQUID magnetometry indicate that there are tetrahedral high-spin iron(II) sites throughout the material, all having the same geometry. As a result, the material is active for electrocatalytic nitrate reduction to ammonia, with a production rate of ca. 0.1 mmol cm –2 h –1 and Faradaic efficiency of ca. 80% at −0.80 V vs RHE.

Anions↗

DOE OSTI2023

Oxidation Chemistry of Bicarbonate and Peroxybicarbonate: Implications for Carbonate Management in Energy Storage

Carbonate formation presents a major challenge to energy storage applications based on low-temperature CO 2 electrolysis and recyclable metal–air batteries. While direct electrochemical oxidation of (bi)carbonate represents a straightforward route for carbonate management, knowledge of the feasibility and mechanisms of direct oxidation is presently lacking. Herein, we report the isolation and characterization of the bis(triphenylphosphine)iminium salts of bicarbonate and peroxybicarbonate, thus enabling the examination of their oxidation chemistry. Infrared spectroelectrochemistry combined with time-resolved infrared spectroscopy reveals that the photoinduced oxidation of HCO 3 – by an Ir(III) photoreagent results in the generation of the short-lived bicarbonate radical in less than 50 ns. The highly acidic bicarbonate radical undergoes proton transfer with HCO 3 – to furnish the carbonate radical anion and H 2 CO 3 , leading to the eventual release of CO 2 and H 2 O, thus accounting for the appearance of H 2 O and CO 2 in both electrochemical and photochemical oxidation experiments. Here, the back reaction of the carbonate radical subsequently oxidizes the Ir(II) photoreagent, leading to carbonate. In the absence of this back reaction, dimerization of the carbonate radical provides entry into peroxybicarbonate, which we show undergoes facile oxidation to O 2 and CO 2 . Together, the results reported identify tangible pathways for the design of catalysts for the management of carbonate in energy storage applications.

25 ENERGY STORAGE↗

DOE OSTI2024

Mixed Valence {Ni 2+ Ni 1+ } Clusters as Models of Acetyl Coenzyme A Synthase Intermediates

Acetyl coenzyme A synthase (ACS) catalyzes the formation and deconstruction of the key biological metabolite, acetyl coenzyme A (acetyl-CoA). The active site of ACS features a {NiNi} cluster bridged to a [Fe4S4] n+ cubane known as the A-cluster. The mechanism by which the A-cluster functions is debated, with few model complexes able to replicate the oxidation states, coordination features, or reactivity proposed in the catalytic cycle. In this work, we isolate the first bimetallic models of two hypothesized intermediates on the paramagnetic pathway of the ACS function. The heteroligated {Ni 2+ Ni 1+ } cluster, [K(12-crown-4) 2 ][1], effectively replicates the coordination number and oxidation state of the proposed “A red ” state of the A-cluster. Addition of carbon monoxide to [1] - allows for isolation of a dinuclear {Ni 2+ Ni 1+ (CO)} complex, [K(12-crown-2) n ][2] (n = 1–2), which bears similarity to the “A NiFeC ” enzyme intermediate. Structural and electronic properties of each cluster are elucidated by X-ray diffraction, nuclear magnetic resonance, cyclic voltammetry, and UV/vis and electron paramagnetic resonance spectroscopies, which are supplemented by density functional theory (DFT) calculations. Calculations indicate that the pseudo-T-shaped geometry of the three-coordinate nickel in [1] – is more stable than the Y-conformation by 22 kcal mol –1 , and that binding of CO to Ni 1+ is barrierless and exergonic by 6 kcal mol –1 . UV/vis absorption spectroscopy on [2] - in conjunction with time-dependent DFT calculations indicates that the square-planar nickel site is involved in electron transfer to the CO π*-orbital. Further, we demonstrate that [2] - promotes thioester synthesis in a reaction analogous to the production of acetyl coenzyme A by ACS.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Integrated CO 2 Capture and Conversion by a Robust Cu(I)-Based Metal–Organic Framework

Metal-organic frameworks (MOFs) have shown promise in both capturing CO 2 under flue gas conditions and converting it into valuable chemicals. However, the development of a single MOF capable of capturing and selectively converting CO 2 has remained elusive due to lack of harmonious combination of selectivity, water stability, and reactivity. For example, Cu(I)-based MOFs are particularly effective for CO 2 conversion, but they do not typically exhibit selective CO 2 adsorption and often suffer from instability in the presence of air and moisture. Developing a Cu(I) MOF that is stable under flue gas conditions while also capturing CO 2 from this mixture would likely afford a material capable of selectively capturing and converting CO 2 in an integrated pathway, which would represent a significant advancement in this field. In this study, we introduce NU-2100, an ultramicroporous Cu(I) MOF, which exhibits both selectivity for CO 2 adsorption and great stability even in the presence of moisture and air. Comprehensive evaluations involving exposure to air, oxygen, water, and varying temperatures reveal that NU-2100 demonstrates superior stability compared to other known Cu(I) MOFs. Utilizing adsorption isotherms and thermogravimetric analysis coupled with gas chromatography-mass spectrometry (TGA-GCMS), we establish the high selectivity of NU-2100 for CO 2 over common flue gas components, including water, nitrogen, and oxygen. Additionally, under mild reaction conditions (50 °C and H 2 :CO 2 = 3:1), NU-2100 exhibits CO 2 capture and catalytic conversion to formic acid with 100% selectivity. Furthermore, this study marks an important step towards the design of next-generation MOFs capable of integrated carbon capture and utilization (iCCU) under industrial conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Intermolecular Interactions in Direct Air Capture Materials: Insights from Charge Density Analysis

Direct air capture (DAC) materials enable the removal of CO 2 from the atmosphere, but improving their efficiency requires a detailed understanding of the intermolecular interactions that govern CO 2 sorption and release. Here, we present an experimental electron density study of methylglyoxal-bis(iminoguanidine) (MGBIG), a promising DAC material, using high-resolution X-ray and neutron diffraction data combined with quantum crystallographic analysis. This approach bridges theoretical and experimental data by quantifying electron density distributions and revealing how hydrogen bonds stabilize CO 2 -derived carbonate phases and may influence the desorption behavior. We identify distinct hydrogen-bonding environments in two crystalline carbonate phases: P1, a transient kinetic product, and P3, a thermodynamically stable phase. Multipolar refinement and electrostatic potential and multipole moment calculations precisely map electron density distributions, revealing key hydrogen bonds involved in CO 2 capture. Topological analysis of electron density highlights a cooperative hydrogen-bonding network in the thermodynamically favored P3 phase, where enhanced electron density delocalization and water-mediated interactions contribute to a more stable lattice. Energetic analyses confirm that stronger hydrogen bonding networks enhance the stability of P3 with a binding energy of −607.0 kJ/mol and greater lattice stability (−847.3 kJ/mol) compared to P1 (−302.5 and −571.0 kJ/mol, respectively). Electrostatic potential maps further illustrate polarization patterns that may influence the stability of the binding of CO 2 and release conditions. These findings establish a direct experimental framework for linking electron density distributions to intermolecular interactions in DAC materials, providing a rational design strategy for optimizing sorbents with improved CO 2 capture efficiency and reduced energy demands.

Electron density↗

DOE OSTI2025

Optimizing CO 2 -Loaded Aqueous Amine Solutions for Higher Electrocatalytic CO 2 Reduction Activity

The activity of aqueous-based carbon dioxide reduction (CO 2 R) reactions is often limited by the solubility of CO 2 . The addition of amines can increase the total dissolved carbon in water through the formation of bicarbonate and carbamate species, which has been used to a great effect to capture CO 2 from dilute streams. Here, in this study, we explore the effect of 12 primary and secondary amines of varying Brønsted basicity, steric profile, and hydrogen-bonding capabilities on the aqueous CO 2 R to CO activity of a molecular Ni(cyclam)Cl 2 catalyst with a Hg electrode. Addition of some of the amines results in greater activity and selectivity for CO production compared to equivalent aqueous solutions without added amines. Under optimal conditions (0.4 M 3-amino-propionitrile), there is an over sevenfold increase in partial current density and greater selectivity for CO compared to equivalent conditions with no amine. Interestingly, the increase in activity did not correlate to any single property across the 12 amines. To elucidate the effect of the amine additives on catalysis, we used vapor–liquid equilibrium modeling (VLE), 13 C NMR spectroscopy, and computational analysis to determine the carbon speciation of the solutions. These results indicate that for amines without ethylalcohol functionalities, CO 2 R activity correlates with carbamate concentration, which is in turn governed by amine basicity and steric effects. However, this correlation does not persist for amines with ethylalcohol functionalities, which can form more stable carbamates through intramolecular-hydrogen bonding. These studies demonstrate that amine additives can enhance aqueous CO 2 R activity and selectivity and describe amine properties that lead to these higher performance metrics.

Amines↗

DOE OSTI2026

Quantifying the Influences of Epoxide Binding in Epoxide/CO 2 Ring Opening Copolymerization Catalysis

Understanding and predicting the effect of epoxide structure on the rate of polymerization in epoxide/CO 2 ring opening copolymerization catalysis is a long-standing challenge. Here, a known highly active Co(III)K(I) catalyst is used to investigate the influences of six different epoxides' binding strengths on their rates of copolymerization. Since calculations and experiments indicate that studying the catalytically relevant Co(III)−epoxide adduct directly is experimentally challenging, epoxide−catalyst binding interactions are quantified using a Co(II)K(I) complex to model the key catalytic intermediate. Epoxide−catalyst coordination is investigated using UV−vis spectroscopy titrations which provide fast and effective determination of association or binding constants. The epoxide−catalyst equilibrium constants show a clear exponential correlation with copolymerization rates and a new catalyst performance linear free energy relationship is revealed. Epoxides exhibiting stronger catalyst binding constants show higher copolymerization rates. The structure−activity correlation is consistent with the polymerization kinetics, mechanism and DFT calculations. Both the methods to investigate epoxide−catalyst coordination and the linear free energy relationship are shown to apply to the series of six epoxides and a second Co(III)K(I) catalyst. These structure− performance relationships are likely applicable to other transition metal catalysts and should expedite future epoxide and catalyst selection to make useful poly(carbonate) materials.

catalysts↗

DOE OSTI2025

High-Throughput Discovery Illuminates Design Principles and Limits for Long-Lived Charged Species in Organic Electrolytes

The chemical stability of charged molecules in all-organic redox flow batteries (RFBs) is required for the prolonged operation of these devices. Molecular engineering and electrolyte optimization are used to mitigate parasitic reactions and extend the lifetimes of the charge carriers. However, how much can structural variation extend the lifetime? To probe this query, we designed a high-throughput kinetic study of the radical cation of N-methylphenothiazinium, guided by statistical sampling and learning algorithms. Using Argonne’s autonomous discovery facility, we conducted over 6,000 kinetic experiments with robotic sample preparation, parallel kinetic measurements, and machine learning inputs, testing 188 solvent molecules selected from a space of over 540 candidates from 11 chemical classes. Algorithmic selections guided us to stable solvent candidates, which were further tested in high concentration with and without supporting electrolyte. Our findings reveal the inherent difficulty of exceeding the current state of the art through solvent variation. The desired stability is statistically rare and poorly predictable. Among the many tested, only three solvents significantly outperformed our baseline, acetonitrile─and none by more than a factor of 3─suggesting a general challenge in achieving the necessary techno-economic targets. Furthermore, we suggest that self-discharge through solvent homolysis is the cause of the observed limitations. Several structural motifs contribute to >1,000 h half-life stability including molecular simplicity, symmetry, oxidation complement, and strategic fluorination. Importantly, this workflow establishes effective assays for diagnosing and predicting oxidative stress for highly stable liquid electrolytes in all batteries.

Batteries↗

DOE OSTI2025

Probing the Surface Chemistry of Lithium Nitridation

Chemical synthesis of Li 3 N through lithium nitridation has potential to advance rechargeable battery and nitrogen fixation technology. However, studies of the conditions for forming Li 3 N on the lithium surface via nitrogen gas exposure report contradictory findings, such as the spontaneous reaction of Li with pure N 2 , the impossibility of forming Li 3 N through pure Li and N 2 interaction, the requirement of trace H 2 O to catalyze the reaction, and evidence to the contrary. In this study, ambient pressure X-ray photoelectron spectroscopy (APXPS) was applied to evaluate the in situ chemical evolution of the lithium metal surface under nitrogen gas up to 800 mTorr. At pressures ≤10 mTorr, no Li 3 N was detected. At higher pressures, surface Li 3 N rapidly reacts with trace CO 2 . Additionally, because metallic lithium is readily oxidized by trace gases, the atomic nitrogen concentration of the lithium surface remains below 2%. When nitridation follows oxidation by O 2 gas, CO 2 gas, or H 2 O vapor, surface Li 3 N formation is inhibited. These results suggest that nitrogen gas can diffuse through the oxidized lithium metal surface to react with subsurface metallic lithium.

Binding energy↗

DOE OSTI2026

Solution and Active Site Speciation Drive Selectivity for Electrocatalytic Reactive Carbon Capture in Diethanolamine over Ni–N–C Catalysts

Direct conversion of captured forms of carbon, or reactive carbon capture (RCC), presents an opportunity to reduce the energy intensity and cost of direct CO 2 utilization from dilute sources. While amine-based sorbents effectively capture CO 2 , their use for RCC presents numerous challenges with typical pure metal catalysts used for electrochemical CO 2 reduction (CO 2 R). Here, using both theory and experiments, we find that Ni–N–C single atom catalysts are effective for RCC conversion to CO using a diethanolamine sorbent, in contrast to pure metal catalysts. Computational analysis reveals that RCC can proceed directly through direct reduction of the sorbent-CO 2 adduct or indirectly by C–N bond breaking facilitating CO 2 adsorption and subsequent reduction. We find that the latter mechanism is most prevalent at low overpotentials where we experimentally observe RCC selectivity. We also find experimentally that the rate of CO production for RCC with Ni–N–C catalysts can exceed pure bicarbonate solutions at intermediate sorbent concentration (0.1–0.5 M DEA) under dilute (10–25%) streams of CO 2 at low overpotentials. The coordination environment of Ni sites and the solution speciation influence their RCC activity, with changes in protonation to coordinating N/C atoms resulting in changing the RCC mechanism and consequent activity. In situ X-ray absorption spectroscopy and computational analysis reveal restructuring under RCC conditions due to hydrogen coadsorption with DEA that limits the stability of Ni–N–C catalysts. This work highlights the importance of carefully controlling the catalyst and solution environment to achieve active and stable RCC electrocatalysis.

Chemistry↗

DOE OSTI2025

Electrochemical CO 2 Capture by a Quinone-Based Covalent Organic Framework

Electrochemical CO 2 capture is an emerging technology that promises to be more energy-efficient than traditional thermal or pressure-swing processes. Herein, the first evidence of electrochemical capture of CO 2 using a covalent organic framework (COF) is presented. We hypothesized that the assembly of anthraquinone units into a well-defined porous framework electrode would lead to enhanced electrochemical CO 2 capture compared to previous approaches that grafted anthraquinones on carbon supports and suffered from low CO 2 capacities and stabilities. To test this, an anthraquinone-based COF is employed, and it is found that the quinones are electrochemically accessible for reversible CO 2 capture in an ionic liquid electrolyte. The system achieves a high electrochemical CO 2 uptake capacity >2.6 mmol g –1 COF, reaching half of the theoretical CO 2 capacity of the material and surpassing the capacities of anthraquinone-functionalized carbons. The stability and CO 2 uptake rate issues encountered with the ionic liquid system are also addressed by using aqueous electrolytes where we attained stable carbon capture for 500 cycles with a 99.6% Coulombic efficiency and an electrical energy consumption of 31 kJ mol CO 2 –1 . The use of covalent organic framework electrodes can become a general strategy for understanding and enhancing the electrochemical CO 2 capture.

carbon capture and storage↗