Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Dual Gate Thin Film Transistors Based on Indium Oxide Active Layers

Polycrystalline Indium Oxide (In{sub 2}O{sub 3}) thin films were employed as an active channel layer for the fabrication of bottom and top gate thin film transistors. While conventional SiO{sub 2} served as a bottom gate dielectric, cross-linked poly-4-vinylphenol (PVP) was used a top gate dielectric. These nano-crystalline TFTs exhibited n-channel behavior with their transport behavior highly dependent on the thickness of the channel. The correlation between the thickness of the active layer and TFT parameters such as on/off ratio, field-effect mobility, threshold voltage were carried out. The optical spectra revealed a high transmittance in the entire visible region, thus making them promising candidates for the display technology.

36 MATERIALS SCIENCE↗

Growth and Magneto-transport Characterization of Double-doped InGaAs/InAlAs Heterostructures with High Indium Compositions

We investigated double-doped InGaAs/InAlAs heterostructures with high indium compositions. The heterostructures were grown by molecular beam epitaxy on GaAs(001) with metamorphic step-graded buffer layers. The magneto-transport characterization was performed by using Hall-bar devices. We observed non-monotonic magneto-resistance oscillations, which indicate a single two-dimensional electron gas (2DEG) with multiple-subband occupation or a 2DEG bilayer. We also observed weak-antilocalization in all samples, which is an evidence of spin-orbit coupling.

36 MATERIALS SCIENCE↗

Performance enhancement of organic light-emitting diodes by chlorine plasma treatment of indium tin oxide

The characteristics of green phosphorescent organic light-emitting diodes (OLEDs) fabricated on ITO/glass substrates pretreated with low-energy O{sub 2} and Cl{sub 2} plasma were compared. At 20 mA/cm{sup 2}, the OLEDs with O{sub 2} and Cl{sub 2} plasma-treated indium tin oxide (ITO) had voltages of 9.6 and 7.6 eV, and brightness of 9580 and 12380 cd/m{sup 2}, respectively. At {approx}10{sup 4} cd/m{sup 2}, the latter had a 30% higher external quantum efficiency and a 74% higher power efficiency. Photoelectron spectroscopies revealed that Cl{sub 2} plasma treatment created stable In-Cl bonds and raised the work function of ITO by up to 0.9 eV. These results suggest that the better energy level alignment at the chlorinated ITO/organic interface enhances hole injection, leading to more efficient and more reliable operation of the OLEDs. The developed plasma chlorination process is very effective for surface modification of ITO and compatible with the fabrication of various organic electronics.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis of indium sulphide quantum dots in perfluoronated ionomer membrane

In this paper, we demonstrate a simple and efficient method for synthesis of β-indium sulphide (In{sub 2}S{sub 3}) nanoparticles embedded in an ionomer matrix (nafion membrane). The influence of reaction temperature on structural, compositional and optical properties of these films were analysed using X-Ray Diffraction, EDAX, UV-Vis absorption spectroscopy and photoluminescence studies. Average particle diameter was estimated using modified effective mass approximation method. Absorption spectra of In{sub 2}S{sub 3} nanoparticles show blue shift compared to bulk In{sub 2}S{sub 3}, indicating strong quantum size confinement effects. PL emission in the wavelength range 530–600 nm was recorded using a 488 nm line from an Ar{sup +} laser as the excitation source.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

High-frequency millimeter wave absorption of indium-substituted ε-Fe{sub 2}O{sub 3} spherical nanoparticles (invited)

In this work, we prepared indium-substituted ε-iron oxide (ε-In{sub x}Fe{sub 2−x}O{sub 3}) spherical nanoparticles by a combination method of reverse-micelle and sol-gel techniques. The powder X-ray diffraction pattern with Rietveld analysis shows that ε-In{sub x}Fe{sub 2−x}O{sub 3} has an orthorhombic crystal structure (space group: Pna2{sub 1}), and the In{sup 3+} ions mainly replace the Fe{sup 3+} ions at B site among the four nonequivalent Fe{sup 3+} sites (A–D sites). The magnetic measurements show that the coercive field (H{sub c}) at 300 K decreases with increasing x, i.e., H{sub c} = 21.9 kOe (x = 0), 12.2 kOe (x = 0.04), 11.6 kOe (x = 0.09), 7.8 kOe (x = 0.13), and 5.9 kOe (x = 0.18). Millimeter wave absorption was measured by terahertz time-domain spectroscopy, and the decrease of resonance frequency (f{sub r}) is observed, i.e., f{sub r} = 182 GHz (x = 0), 160 GHz (x = 0.04), 143 GHz (x = 0.09), 123 GHz (x = 0.13), and 110 GHz (x = 0.18). This decrease in the f{sub r} value is understood by the decrease of magnetic anisotropy, which is caused by the replacement of Fe{sup 3+} (S = 5/2) with nonmagnetic In{sup 3+} (S = 0) at B site contributing to the magnetic anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Broad compositional tunability of indium tin oxide nanowires grown by the vapor-liquid-solid mechanism

Indium tin oxide nanowires were grown by the reaction of In and Sn with O{sub 2} at 800 °C via the vapor-liquid-solid mechanism on 1 nm Au/Si(001). We obtain Sn doped In{sub 2}O{sub 3} nanowires having a cubic bixbyite crystal structure by using In:Sn source weight ratios > 1:9 while below this we observe the emergence of tetragonal rutile SnO{sub 2} and suppression of In{sub 2}O{sub 3} permitting compositional and structural tuning from SnO{sub 2} to In{sub 2}O{sub 3} which is accompanied by a blue shift of the photoluminescence spectrum and increase in carrier lifetime attributed to a higher crystal quality and Fermi level position.

36 MATERIALS SCIENCE↗

Very high efficiency phosphorescent organic light-emitting devices by using rough indium tin oxide

The efficiency of organic light-emitting devices (OLEDs) is shown to significantly depend on the roughness of the indium tin oxide (ITO) anode. By using rougher ITO, light trapped in the ITO/organic wave-guided mode can be efficiently extracted, and a light outcoupling enhancement as high as 40% is achieved. Moreover, contrary to expectations, the lifetime of OLEDs is not affected by ITO roughness. Finally, an OLED employing rough ITO anode that exhibits a current efficiency of 56 cd/A at the remarkably high brightness of 10{sup 5} cd/m{sup 2} is obtained. This represents the highest current efficiency at such high brightness to date for an OLED utilizing an ITO anode, without any external light outcoupling techniques. The results demonstrate the significant efficiency benefits of using ITO with higher roughness in OLEDs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

One-dimensional behavior and high thermoelectric power factor in thin indium arsenide nanowires

Electrical conductivity and Seebeck coefficient of quasi-one-dimensional indium arsenide (InAs) nanowires with 20 nm diameter are investigated. The carrier concentration of the passivated nanowires was modulated by a gate electrode. A thermoelectric power factor of 1.7 × 10{sup −3} W/m K{sup 2} was measured at room temperature. This value is at least as high as in bulk-InAs and exceeds by far typical values of thicker InAs nanowires with three-dimensional properties. The interpretation of the experimental results in terms of power-factor enhancement by one-dimensionality is supported by model calculations using the Boltzmann transport formalism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Hydrogenated indium oxide window layers for high-efficiency Cu(In,Ga)Se{sub 2} solar cells

High mobility hydrogenated indium oxide is investigated as a transparent contact for thin film Cu(In,Ga)Se{sub 2} (CIGS) solar cells. Hydrogen doping of In{sub 2}O{sub 3} thin films is achieved by injection of H{sub 2}O water vapor or H{sub 2} gas during the sputter process. As-deposited amorphous In{sub 2}O{sub 3}:H films exhibit a high electron mobility of ∼50 cm{sup 2}/Vs at room temperature. A bulk hydrogen concentration of ∼4 at. % was measured for both optimized H{sub 2}O and H{sub 2}-processed films, although the H{sub 2}O-derived film exhibits a doping gradient as detected by elastic recoil detection analysis. Amorphous IOH films are implemented as front contacts in CIGS based solar cells, and their performance is compared with the reference ZnO:Al electrodes. The most significant feature of IOH containing devices is an enhanced open circuit voltage (V{sub OC}) of ∼20 mV regardless of the doping approach, whereas the short circuit current and fill factor remain the same for the H{sub 2}O case or slightly decrease for H{sub 2}. The overall power conversion efficiency is improved from 15.7% to 16.2% by substituting ZnO:Al with IOH (H{sub 2}O) as front contacts. Finally, stability tests of non-encapsulated solar cells in dry air at 80 °C and constant illumination for 500 h demonstrate a higher stability for IOH-containing devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of top gate potential on bias-stress for dual gate amorphous indium-gallium-zinc-oxide thin film transistor

We report the abnormal behavior of the threshold voltage (V{sub TH}) shift under positive bias Temperature stress (PBTS) and negative bias temperature stress (NBTS) at top/bottom gate in dual gate amorphous indium-gallium-zinc-oxide (a-IGZO) thin-film transistors (TFTs). It is found that the PBTS at top gate shows negative transfer shift and NBTS shows positive transfer shift for both top and bottom gate sweep. The shift of bottom/top gate sweep is dominated by top gate bias (V{sub TG}), while bottom gate bias (V{sub BG}) is less effect than V{sub TG}. The X-ray photoelectron spectroscopy (XPS) depth profile provides the evidence of In metal diffusion to the top SiO{sub 2}/a-IGZO and also the existence of large amount of In{sup +} under positive top gate bias around top interfaces, thus negative transfer shift is observed. On the other hand, the formation of OH{sup −} at top interfaces under the stress of negative top gate bias shows negative transfer shift. The domination of V{sub TG} both on bottom/top gate sweep after PBTS/NBTS is obviously occurred due to thin active layer.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Observation of indium ion migration-induced resistive switching in Al/Mg{sub 0.5}Ca{sub 0.5}TiO{sub 3}/ITO

Understanding switching mechanisms is very important for resistive random access memory (RRAM) applications. This letter reports an investigation of Al/Mg{sub 0.5}Ca{sub 0.5}TiO{sub 3} (MCTO)/ITO RRAM, which exhibits bipolar resistive switching behavior. The filaments that connect Al electrodes with indium tin oxide electrodes across the MCTO layer at a low-resistance state are identified. The filaments composed of In{sub 2}O{sub 3} crystals are observed through energy-dispersive X-ray spectroscopy, high-resolution transmission electron microscopy, nanobeam diffraction, and comparisons of Joint Committee on Powder Diffraction Standards (JCPDS) cards. Finally, a switching mechanism resulting from an electrical field induced by In{sup 3+} ion migration is proposed. In{sup 3+} ion migration forms/ruptures the conductive filaments and sets/resets the RRAM device.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Electron affinity of indium and the fine structure of In{sup -} measured using infrared photodetachment threshold spectroscopy

Binding energies of the fine-structure levels of the indium negative ion In{sup -} are measured using infrared photodetachment threshold spectroscopy. The relative cross section for neutral atom production is measured with a crossed ion-beam-laser-beam apparatus over selected photon energy ranges between 300 and 700 meV. An s-wave threshold is observed due to the opening of the In{sup -} (5p{sup 23}P{sub 0}) to In(5p{sup 2}P{sub 1/2}) ground-state-to-ground-state transition, which determines the electron affinity of In to be 383.92(6) meV. The present result is in good agreement with previous theoretical calculations, but it differs substantially from the previously measured electron affinity and reduces the uncertainty by a factor of 150. s-wave thresholds are also observed for detachment from the excited fine-structure levels of In{sup -}, permitting accurate determination of the fine-structure intervals of 76.06(7) meV for J=0-1 and 170.6(6) meV for J=0-2, which are in good agreement with the previous measurements and substantially reduce the uncertainties.

74 ATOMIC AND MOLECULAR PHYSICS↗

Oxygen incorporation and charge donor activation via subplantation during growth of indium tin oxide films

The use of plasma assistance is shown to enhance the optoelectronic properties (i.e., transparency, free carrier density, and conductivity) of indium tin oxide (ITO) deposited by reactive magnetron sputtering by promoting the incorporation of oxygen in substoichiometric oxide films during magnetron sputtering. The authors demonstrate that subplantation of oxygen ions (O{sub 2}{sup +} and O{sup +}), i.e., their implantation to depths of several nanometers below the growth surface, is the primary pathway by which radio frequency plasma assistance at the substrate surface enhances oxygen incorporation during reactive magnetron sputtering of ITO. These conclusions are supported independently by elastic recoil detection measurements of ITO films in the time-of-flight regime and Monte Carlo TRIDYN simulations of oxygen ion bombardment in the reactive low-pressure plasma environment. The findings indicate that subplantation plays a crucial role in improving the optoelectronic properties of O-deficient ITO films.

36 MATERIALS SCIENCE↗

Influence of copper to indium atomic ratio on the properties of Cu-In-Te based thin-film solar cells prepared by low-temperature co-evaporation

The influence of copper to indium atomic ratio (Cu/In) on the properties of Cu-In-Te based thin films and solar cells was investigated. The films (Cu/In = 0.38-1.17) were grown on both bare and Mo-coated soda-lime glass substrates at 250 Degree-Sign C by single-step co-evaporation using a molecular beam epitaxy system. Highly (112)-oriented CuInTe{sub 2} films were obtained at Cu/In ratios of 0.84-0.99. However, stoichiometric and Cu-rich films showed a poor film structure with high surface roughness. The films consist of polyhedron-shaped grains, which are related to the coexistence of a Cu{sub 2-x}Te phase, and significant evidence for the coexistence of the Cu{sub 2-x}Te phase in the stoichiometric and Cu-rich films is presented. KCN treatment was performed for the films in order to remove the Cu{sub 2-x}Te phase. The stoichiometric CuInTe{sub 2} thin films exhibited a high mobility above 50 cm{sup 2}/V s at room temperature after the KCN treatment. A preliminary solar cell fabricated using a 1.4-{mu}m-thick Cu-poor CuInTe{sub 2} thin film (Cu/In = 0.84, E{sub g} = 0.988 eV) yielded a total-area efficiency of 2.10%. The photovoltaic performance of the cell was improved after long-term ambient aging in dark conditions.

36 MATERIALS SCIENCE↗

Charge carrier transport in indium oxide nanocrystals

Nanocrystalline indium oxide samples with various sizes of nanocrystals are synthesized by the sol-gel method. The minimal and maximal average sizes of nanocrystals are 7-8 and 18-20 nm, respectively. An analysis of conductivity measured at dc and ac signals in a wide temperature range (T = 50-300 K) shows that the transport of charge carriers at high temperatures takes place over the conduction band, while in the low-temperature range, the hopping mechanism with a varying jump length over localized states is observed.

36 MATERIALS SCIENCE↗

Properties of indium phosphite and selected compounds under irradiation with swift heavy ions

Surface and bulk properties of indium phosphate single crystals with initial and previously irradiated by 25 MeV electrons structures were irradiated with {sup 86}Kr (253 MeV) and {sup 197}Au (200 MeV) up to various fluences. The modern methods of condensed matter studies were used for research of InP property changes before and after irradiation as scanning (SEM) and high resolution transmission electronic microscopy (HTEM), Rutherford backscattering spectroscopy (RBS/C) and atomic force microscopy (AFM). The comparison of obtained results with the results of other authors is carried out. The surface structure change of InP single crystal irradiated by high-energy 86Kr ions and electrons is studied. It is shown the changes of the InP surface have complicated character and caused by inelastic sputtering processes. It is observed the twice irradiated layer swells with the cracks creation on the surface. The swelling with cracks and strong sputtering of twice irradiated by electrons and ions with high energy layers of the InP and GaAs surfaces are explained using the model based on the influence of ionizing energy loss of swift {sup 86}Kr ions. The small crystalline objects are detected on the InP surface irradiated with {sup 86}Kr ions which may be nano- and micro-crystals of InP. All obtained effects are discussed in frame of models based on ionizing energy loss of swift heavy ions.

36 MATERIALS SCIENCE↗

A 3D porous indium(III) coordination polymer involving in-situ ligand synthesis

The hydrothermal reaction of In{sup 3+} and 1,2,4-benzenetricarboxylic acid with the presence of piperazine leads to the generation of a novel 3D porous coordination polymer, [H{sub 3}O][In{sub 2}(btc)(bdc)(OH){sub 2}].5.5H{sub 2}O (1), (btc=1,2,4-benzenetricarboxylate, bdc=1,4-benzenedicarboxylate). Compound 1 crystallizes in orthorhombic space group Pbca with a=16.216(7) A, b=13.437(6) A, c=31.277(14) A, and Z=8. It is interesting to find that the in-situ decarboxylation reaction of 1,2,4-benzenetricarboxylate (btc) partially transformed into 1,4-benzenedicarboxylate (bdc) occurs. The 16 indium(III) centers were linked by four btc, four bdc and two mu{sub 2}-OH ligands to form a box-girder. The adjacent box-girders are further connected by the bdc and btc ligands to generate a novel porous metal-organic framework containing nanotubular open channel with a cross-section of approximately 11.5x11.3 A{sup 2}. The micropores are occupied by lattice water molecules, and the solvent-accessible volume of the unit cell was estimated to be 3658.6 A{sup 3}, which is approximately 53.7% of the unit-cell volume (6815.4 A{sup 3}). - Graphical Abstract: The hydrothermal reaction of In{sup 3+} and 1,2,4-benzenetricarboxylic acid with the presence of piperazine leads to the generation of a novel 3D porous coordination polymer, [H{sub 3}O][In{sub 2}(btc)(bdc)(OH){sub 2}].5.5H{sub 2}O, (btc=1,2,4-benzenetricarboxylate, bdc=1,4-benzenedicarboxylate).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Phase Transitions between Layered Indium Selenide for Integrated Photonic Memory

The primary mechanism of optical memoristive devices relies on phase transitions between amorphous and crystalline states. The slow or energy-hungry amorphous–crystalline transitions in optical phase-change materials are detrimental to the scalability and performance of devices. Leveraging an integrated photonic platform, nonvolatile and reversible switching between two layered structures of indium selenide (In 2 Se 3 ) triggered by a single nanosecond pulse is demonstrated. The high-resolution pair distribution function reveals the detailed atomistic transition pathways between the layered structures. With interlayer “shear glide” and isosymmetric phase transition, switching between the α- and β-structural states contains low re-configurational entropy, allowing reversible switching between layered structures. Broadband refractive index contrast, optical transparency, and volumetric effect in the crystalline–crystalline phase transition are experimentally characterized in molecular-beam-epitaxy-grown thin films and compared to ab initio calculations. Finally, the nonlinear resonator transmission spectra measure of incremental linear loss rate of 3.3 GHz, introduced by a 1.5 µm-long In 2 Se 3 -covered layer, resulted from the combinations of material absorption and scattering.

36 MATERIALS SCIENCE↗