Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IMPURITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Secondary ions mass spectroscopy measurements of dopant impurities in highly stressed InGaN laser diodes

We performed a systematic secondary ions mass spectroscopy (SIMS) study of dopant impurities in life-time stressed InGaN laser devices in order to investigate the main degradation mechanism that is observed in nitride laser diodes. A continuous wave (cw) current density of 3 kA/cm{sup 2} was applied to InGaN laser diodes over an extended period of time and we observed the characteristic square root degradation of optical power. We compared the SIMS profiles of Mg, H, and Si impurities in the aged devices and observe that the impurities are remarkably stable over 10 000 h of cw operation. Nor is there any SIMS evidence of p-contact metals penetrating into the semiconductor material. Thus our SIMS results are contrary to what one would expect for impurity diffusion causing the observed square root degradation characteristic.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of poloidal asymmetries on impurity peaking in tokamaks

Poloidal impurity asymmetries are frequently observed in tokamaks. In this paper, the effect of poloidal asymmetry on electrostatic turbulent transport is studied, including the effect of the E Multiplication-Sign B drift. Collisions are modeled by a Lorentz operator, and the gyrokinetic equation is solved with a variational approach. The impurity transport is shown to be sensitive to the magnetic shear and changes sign for s Greater-Than-Or-Equivalent-To 0.5 in the presence of inboard accumulation. The zero-flux impurity density gradient (peaking factor) is shown to be rather insensitive to collisions in both ion temperature gradient and trapped electron mode driven cases. Our results suggest that the asymmetry (both the location of its maximum and its strength) and the magnetic shear are the two most important parameters that affect the impurity peaking.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Kinetic shear Alfvén instability in the presence of impurity ions in tokamak plasmas

The effects of impurity ions on the kinetic shear Alfvén (KSA) instability in tokamak plasmas are investigated by numerically solving the integral equations for the KSA eigenmode in the toroidal geometry. The kinetic effects of hydrogen and impurity ions, including transit motion, finite ion Larmor radius, and finite-orbit-width, are taken into account. Toroidicity induced linear mode coupling is included through the ballooning-mode representation. Here, the effects of carbon, oxygen, and tungsten ions on the KSA instability in toroidal plasmas are investigated. It is found that, depending on the concentration and density profile of the impurity ions, the latter can be either stabilizing or destabilizing for the KSA modes. The results here confirm the importance of impurity ions in tokamak experiments and should be useful for analyzing experimental data as well as for understanding anomalous transport and control of tokamak plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Impurity effects on polaron-exciton formation in conjugated polymers

Combining the one-dimensional tight-binding Su-Schrieffer-Heeger model and the extended Hubbard model, the collision of two oppositely charged polarons is investigated under the influence of impurity effects using a non-adiabatic evolution method. Results show that electron-electron interactions have direct influence on the charge distribution coupled to the polaron-exciton lattice defect. Additionally, the presence of an impurity in the collisional process reduces the critical electric field for the polaron-exciton formation. In the small electric field regime, the impurity effects open three channels and are of fundamental importance to favor the polaron-exciton creation. The results indicate that the scattering between polarons in the presence of impurities can throw a new light on the description of electroluminescence in conjugated polymer systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charged impurity-induced scatterings in chemical vapor deposited graphene

We investigate the effects of defect scatterings on the electric transport properties of chemical vapor deposited (CVD) graphene by measuring the carrier density dependence of the magneto-conductivity. To clarify the dominant scattering mechanism, we perform extensive measurements on large-area samples with different mobility to exclude the edge effect. We analyze our data with the major scattering mechanisms such as short-range static scatters, short-range screened Coulomb disorders, and weak-localization (WL). We establish that the charged impurities are the predominant scatters because there is a strong correlation between the mobility and the charge impurity density. Near the charge neutral point (CNP), the electron-hole puddles that are induced by the charged impurities enhance the inter-valley scattering, which is favorable for WL observations. Away from the CNP, the charged-impurity-induced scattering is weak because of the effective screening by the charge carriers. As a result, the local static structural defects govern the charge transport. Our findings provide compelling evidence for understanding the scattering mechanisms in graphene and pave the way for the improvement of fabrication techniques to achieve high-quality CVD graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Impurity behavior during sawtooth activity in tokamak plasmas

The transport of impurities by a sawtooth crash is simulated with the XTOR-2F code. Impurities are modeled as passive scalars, evolving in the compressible MHD flow inferred from the main MHD plasma. For a peaked impurity density profile, the non-linear kink flow of the sawtooth crash redistributes the profile efficiently and most of the particles in the peak inside the q = 1 surface are expelled. For an initially hollow impurity density profile, the crash leads to a significant penetration up to the magnetic axis. The results are compared with Kadomtsev's model. Despite essentially different mechanisms, the evolution of the particle content inside the q = 1 surface for Kadomtsev's model and for the non-linear case are virtually identical for the peaked profile, while the model slightly overestimates penetration for the hollow case.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Disentangling phonon and impurity interactions in δ-doped Si(001)

We present a study of the phonon and impurity interactions in a shallow two dimensional electron gas formed in Si(001). A highly conductive ultra-narrow n-type dopant δ-layer, which serves as a platform for quantum computation architecture, is formed and studied by angle resolved photoemission spectroscopy (ARPES) and temperature dependent nanoscale 4-point probe (4PP). The bandstructure of the δ-layer state is both measured and simulated. At 100 K, good agreement is only achieved by including interactions; electron-impurity scattering (W{sub 0} = 56 to 61 meV); and electron-phonon coupling (λ = 0.14 ± 0.04). These results are shown to be consistent with temperature dependent 4PP resistance measurements which indicate that at 100 K, ≈7∕8 of the measured resistance is due to impurity scattering with the remaining 1/8 coming from phonon interactions. In both resistance and bandstructure measurements, the impurity contribution exhibits a variability of ≈9% for nominally identical samples. The combination of ARPES and 4PP affords a thorough insight into the relevant contributions to electrical resistance in reduced dimensionality electronic platforms.

36 MATERIALS SCIENCE↗

Estimating the entropy and quantifying the impurity of a swarm of surface-hopping trajectories: A new perspective on decoherence

In this article, we consider the intrinsic entropy of Tully's fewest switches surface hopping (FSSH) algorithm (as estimated by the impurity of the density matrix) [J. Chem. Phys. 93, 1061 (1990)]. We show that, even for a closed system, the total impurity of a FSSH calculation increases in time (rather than stays constant). This apparent failure of the FSSH algorithm can be traced back to an incorrect, approximate treatment of the electronic coherence between wavepackets moving along different potential energy surfaces. This incorrect treatment of electronic coherence also prevents the FSSH algorithm from correctly describing wavepacket recoherences (which is a well established limitation of the FSSH method). Nevertheless, despite these limitations, the FSSH algorithm often predicts accurate observables because the electronic coherence density is modulated by a phase factor which varies rapidly in phase space and which often integrates to almost zero. Adding “decoherence” events on top of a FSSH calculation completely destroys the incorrect FSSH electronic coherence and effectively sets the Poincaré recurrence time for wavepacket recoherence to infinity; this modification usually increases FSSH accuracy (assuming there are no recoherences) while also offering long-time stability for trajectories. In practice, we show that introducing “decoherence” events does not change the total FSSH impurity significantly, but does lead to more accurate evaluations of the impurity of the electronic subsystem.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Carbon impurities on graphene synthesized by chemical vapor deposition on platinum

We report nanocrystalline carbon impurities coexisting with graphene synthesized via chemical vapor deposition on platinum. For certain growth conditions, we observe micron-size island-like impurity layers which can be mistaken for second graphene layers in optical microscopy or scanning electron microscopy. The island orientation depends on the crystalline orientation of the Pt, as shown by electron backscatter diffraction, indicating growth of carbon at the platinum surface below graphene. Dark-field transmission electron microscopy indicates that in addition to uniform single-crystal graphene, our sample is decorated with nanocrystalline carbon impurities with a spatially inhomogeneous distribution. The impurity concentration can be reduced significantly by lowering the growth temperature. Raman spectra show a large D peak, however, electrical characterization shows high mobility (∼8000 cm{sup 2}/Vs), indicating a limitation for Raman spectroscopy in characterizing the electronic quality of graphene.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Formation energy of oxygen vacancies in ZnO determined by investigating thermal behavior of Al and In impurities

Thermal behavior and interacting nature of 100-ppm Al and ∼100-ppt In impurities doped in zinc oxide (ZnO) were investigated by means of the time-differential perturbed angular correlation method with the {sup 111}In(→{sup 111}Cd) probe. Contrasting interactions between Al and In impurities were observed depending on different atmospheric conditions: (1) in air, Al and In impurities irreversibly associate with each other in the process of their thermal diffusion, but (2) in vacuum, their bound state formed in air dissociates by heat treatment at temperatures higher than 873 K, and this process is enhanced with increasing temperature. Detailed investigation of the thermal behavior of the impurities has revealed that the dissociation reaction is triggered by the formation of oxygen vacancies in the vicinity of the locally associated In-Al structure. A unique method to determine the activation energy of the oxygen-vacancy formation is presented with the estimated experimental value of E{sub a} = 0.72(6) eV.

36 MATERIALS SCIENCE↗

Electrical flicker-noise generated by filling and emptying of impurity states in injectors of quantum-cascade lasers

Free running line-widths (>100 kHz), much broader than intrinsic line-widths ∼100 Hz, of existing quantum-cascade lasers are governed by strong flicker frequency-noise originating from electrical flicker noise. Understanding of microscopic origins of the electrical flicker noises in quantum-cascade lasers is crucially important for the reduction of strength of flicker frequency-noise without assistances of any type of feedback schemes. In this article, an ad hoc model that is based on fluctuating charge-dipoles induced by electron trappings and de-trappings at indispensable impurity states in injector super-lattices of a quantum-cascade laser is proposed, developing theoretical framework based on the model. The validity of the present model is evaluated by comparing theoretical voltage-noise power spectral densities based on the model with experimental ones obtained by using mid-infrared quantum-cascade lasers with designed impurity-positioning. The obtained experimental results on flicker noises, in comparison with the theoretical ones, shed light on physical mechanisms, such as the inherent one due to impurity states in their injectors and extrinsic ones due to surface states on the ridge-walls and due to residual deep traps, for electrical flicker-noise generation in existing mid-infrared quantum-cascade lasers. It is shown theoretically that quasi-delta doping of impurities in their injectors leads to strong suppression of electrical flicker noise by minimization of the dipole length at a certain temperature, for instance ∼300 K and, in turn, is expected to result in substantial narrowing of the free running line-width down below 10 kHz.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Runaway electron dynamics in tokamak plasmas with high impurity content

The dynamics of high energy runaway electrons is analyzed for plasmas with high impurity content. It is shown that modified collision terms are required in order to account for the collisions of the relativistic runaway electrons with partially stripped impurity ions, including the effect of the collisions with free and bound electrons, as well as the scattering by the full nuclear and the electron-shielded ion charge. The effect of the impurities on the avalanche runaway growth rate is discussed. The results are applied, for illustration, to the interpretation of the runaway electron behavior during disruptions, where large amounts of impurities are expected, particularly during disruption mitigation by massive gas injection. The consequences for the electron synchrotron radiation losses and the resulting runaway electron dynamics are also analyzed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Use of nonlocal helium microplasma for gas impurities detection by the collisional electron spectroscopy method

The collisional electron spectroscopy (CES) method, which lays the ground for a new field for analytical detection of gas impurities at high pressures, has been verified. The CES method enables the identification of gas impurities in the collisional mode of electron movement, where the advantages of nonlocal formation of the electron energy distribution function (EEDF) are fulfilled. Important features of dc negative glow microplasma and probe method for plasma diagnostics are applied. A new microplasma gas analyzer design is proposed. Admixtures of 0.2% Ar, 0.6% Kr, 0.1% N{sub 2}, and 0.05% CO{sub 2} are used as examples of atomic and molecular impurities to prove the possibility for detecting and identifying their presence in high pressure He plasma (50–250 Torr). The identification of the particles under analysis is made from the measurements of the high energy part of the EEDF, where maxima appear, resulting from the characteristic electrons released in Penning reactions of He metastable atoms with impurity particles. Considerable progress in the development of a novel miniature gas analyzer for chemical sensing in gas phase environments has been made.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of impurity doping in gapped bilayer graphene

Impurity doping plays a pivotal role in semiconductor electronics. We study the doping effect in a two-dimensional semiconductor, gapped bilayer graphene. By employing in situ deposition of calcium on the bilayer graphene, dopants are controllably introduced. Low temperature transport results show a variable range hopping conduction near the charge neutrality point persisting up to 50 K, providing evidence for the impurity levels inside the gap. Our experiment confirms a predicted peculiar effect in the gapped bilayer graphene, i.e., formation of in-gap states even if the bare impurity level lies in the conduction band. The result provides perspective on the effect of doping and impurity levels in semiconducting bilayer graphene.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A LIBS method for simultaneous monitoring of the impurities and the hydrogenic composition present in the wall of the TJ-II stellarator

The study of plasma-wall interactions and impurity transport in the plasma fusion devices is critical for the development of future fusion reactors. An experiment to perform laser induced breakdown spectroscopy, using minor modifications of our existing laser blow-off impurity injection system, has been set up thus making both experiments compatible. The radiation produced by the laser pulse focused at the TJ-II wall evaporates a surface layer of deposited impurities and the subsequent radiation produced by the laser-produced plasma is collected by two separate lens and fiber combinations into two spectrometers. The first spectrometer, with low spectral resolution, records a spectrum from 200 to 900 nm to give a survey of impurities present in the wall. The second one, with high resolution, is tuned to the wavelengths of the Hα and Dα lines in order to resolve them and quantify the hydrogen isotopic ratio present on the surface of the wall. The alignment, calibration, and spectral analysis method will be described in detail. First experimental results obtained with this setup will be shown and its relevance for the TJ-II experimental program discussed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Controlling dynamical thermal transport of biased bilayer graphene by impurity atoms

We address the dynamical thermal conductivity of biased bilayer graphene doped with acceptor impurity atoms for AA-stacking in the context of tight binding model Hamiltonian. The effect of scattering by dilute charged impurities is discussed in terms of the self-consistent Born approximation. Green’s function approach has been exploited to find the behavior of thermal conductivity of bilayer graphene within the linear response theory. We have found the frequency dependence of thermal conductivity for different values of concentration and scattering strength of dopant impurity. Also the dependence of thermal conductivity on the impurity concentration and bias voltage has been investigated in details.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Charge-state independent anomalous transport for a wide range of different impurity species observed at Wendelstein 7-X

Here, the plasma volume averaged impurity confinement of selected charge states and impurity species has been characterized for the Stellarator Wendelstein 7-X (W7-X), covering a wide range of atomic charges (Z = 12–44) and atomic masses (M = 28–184). A comparison of the experimental findings to theoretical neoclassical and turbulent transport expectations suggests, aside from/in addition to the neoclassical transport, an additional significant anomalous transport mechanism, which is not inconsistent with the predictions of a turbulence dominated impurity transport and is in agreement with the experimental results from recent transport studies based on the direct measurements of impurity diffusion profiles, performed at W7-X.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A first-principles understanding of point defects and impurities in GaN

Attaining control over the electrical conductivity of gallium nitride through impurity doping is one of the foremost achievements in semiconductor science. Yet, unwanted contaminants and point defects continue to limit device performance, and experimental techniques alone are insufficient for elucidating the behavior of these unintentionally incorporated species. Methodological advancements have made first-principles calculations more powerful than ever and capable of quantitative predictions, though care must still be taken in comparing results from theory and experiment. In this Tutorial, we explain the basic concepts that define the behavior of dopants, unintentional impurities, and point defects in GaN. We also describe how to interpret experimental results in the context of theoretical calculations and also discuss how the properties of defects and impurities vary in III-nitride alloys. Lastly, we examine how the physics of defects and impurities in GaN is relevant for understanding other wide-bandgap semiconductor materials, such as the II–IV-nitrides, boron nitride, and the transition metal nitrides.

36 MATERIALS SCIENCE↗