Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Hydro”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Model‐Based Analysis of the Effects of Dam‐Induced River Water and Groundwater Interactions on Hydro‐Biogeochemical Transformation of Redox Sensitive Contaminants in a Hyporheic Zone

Abstract Biogeochemical processes in the hyporheic zone (HZ) may retard the contaminants migration from groundwater to the river and vice versa. Anthropogenic activities may further complicate such processes. This study investigated the effects of dam‐induced hydrodynamics on biogeochemical transformation of contaminants using Cr as an example in the HZ of the Columbia River at the U.S. Department of Energy's Hanford Site. The flow velocities in the HZ were first simulated using the measured or averaged groundwater level and river stage at hourly, daily, weekly, and monthly time scales. The flow velocities were then incorporated into a reactive transport model with independently characterized biogeochemical reactions and kinetics. Simulation results indicated that hydrodynamics can significantly influence the rate and extent of Cr (VI) biogeochemical transformation, which was mainly controlled by the kinetic reduction of Cr (VI) to sparely soluble Cr (III) by sediment‐associated Fe (II) that can be regenerated by microorganisms with organic carbon as electron donor. The frequent flow direction reversals in the HZ induced by dam operations enhanced the rate of microbial consumption of bioavailable OC, which, if there was no organic carbon supply, can eventually terminate the Fe (II) regeneration mechanism and exhaust the HZ's redox capacity in reducing Cr (VI) to Cr (III). This study demonstrated the importance of hydrodynamics on biogeochemical transformation of contaminants in the HZ and of the time scales used in assessing the reactive transport of chemicals and contaminants in the HZ as the net supply of redox sensitive chemicals such as dissolved oxygen into the HZ is a function of the frequency of flow direction reversal.

Yang, Chen↗

Joint Geophysical and Numerical Insights of the Coupled Thermal‐Hydro‐Mechanical Processes During Heating in Salt

Abstract Salt offers an optimal medium for the permanent isolation of heat‐producing radioactive waste due to its impermeability, high thermal conductivity, and ability to close fractures through creep. A thorough understanding of the thermal‐hydrological‐mechanical (THM) processes, encompassing brine migration, is fundamental for secure radioactive waste disposal within salt formations. At the Waste Isolation Pilot Plant (WIPP), we conducted joint in situ geophysical monitoring experiments during active heating to investigate brine migration near excavations. This experiment incorporated electrical resistivity tomography (ERT) alongside high‐resolution fiber‐optic‐based distributed temperature sensing within a controlled heating experiment. Additionally, discrete element model (DEM) based numerical simulations were conducted to simulate THM processes during heating, providing a more mechanistic understanding of the coupled processes leading to the observed changes in geophysical measurements. During heating, resistivity shifts near the heater were reasonably explained by temperature effects. However, in more distant, cooler regions, the resistivity decrease exceeded predictions based solely on temperature. DEM simulations highlighted brine migration, propelled by pore pressure gradients, as the likely primary factor contributing to the additional resistivity decline beyond temperature effects. The comparison between the predicted ERT responses and observations was much improved when considering the effects of brine migration based on the DEM simulations. These geophysical and simulation findings shed light on brine migration in response to salt heating, enhancing our understanding of the coupled THM processes in salt for safe radioactive waste disposal.

58 GEOSCIENCES↗

Relating Hydro–Mechanical and Elastodynamic Properties of Dynamically Stressed Tensile–Fractured Rock in Relation to Applied Normal Stress, Fracture Aperture, and Contact Area

We exploit nonlinear elastodynamic properties of fractured rock to probe the micro-scale mechanics of fractures and understand the relation between fluid transport and fracture aperture under dynamic stressing. Experiments were conducted on rough, tensile-fractured Westerly granite subject to triaxial stresses. We measure fracture permeability for steady-state fluid flow with deionized water. Pore pressure oscillations are applied at amplitudes ranging from 0.2 to 1 MPa at 1 Hz frequency. During dynamic stressing we transmit ultrasonic signals through the fracture using an array of piezoelectric transducers (PZTs) to monitor evolution of interface properties. We examine the influence of fracture aperture and contact area by conducting measurements at effective normal stresses of 10–20 MPa. Additionally, the evolution of contact area with stress is characterized using pressure sensitive film. These experiments are conducted separately with the same fracture and map contact area at stresses from 9 to 21 MPa. The measurements are a proxy for “true” contact area for the fracture surface and we relate them to elastic properties using the calculated PZT sensor footprints via numerical modeling of Fresnel zones. We compare the elastodynamic response of the fracture using the stress-induced changes in ultrasonic wave velocities for transmitter-receiver pairs to image spatial variations in contact properties. We show that nonlinear elasticity and permeability enhancement decrease with increasing normal stress. Additionally, post-oscillation wave velocity and permeability exhibit quick recoveries toward pre-oscillation values. Estimates of fracture contact area (global and local) demonstrate that the elastodynamic and permeability responses are dominated by fracture topology.

58 GEOSCIENCES↗

A Comprehensive View of Global Potential for Hydro-generated Electricity

In this study, we assess global hydropower potential using runoff and stream flow data, along with turbine technology performance, cost assumptions, and environmental considerations. The results provide the first comprehensive quantification of global hydropower potential including gross, technical, economic, and exploitable estimates. Total global potential of gross, technical, economic, and exploitable hydropower are estimated to be approximately 128, 39, 32, and 27 petawatt hours per year, respectively. The economic and exploitable potential of hydropower are calculated at less than 9 cents/kWh. We find that hydropower has the potential to supply a significant portion of the world energy needs, although this potential varies substantially by region. Globally, hydropower can potentially supply about 1.5 times the total electricity demand in 2005. Estimated hydropower resources in a number of countries are sufficient to accommodate their demand for electricity in 2005, e.g., Brazil (5.6 times), Russia (4.6 times), and Canada (3.5 times). A sensitivity analysis indicates that hydropower estimates are not highly sensitive to five key parameters: design flow (varying by -2% to +1% at less than 9 cents/kWh), cost and financing options (by -7% to +6%), turbine efficiency (by -10% to +10%), stream flow (by -10% to +10%), and fixed charge rate (by -6% to 5%). This sensitivity analysis emphasizes the reliable role of hydropower for future energy systems, when compared to other renewable energy resources with larger uncertainty in their future potentials.

Zhou, Yuyu↗

A measurable Lawson criterion and hydro-equivalent curves for inertial confinement fusion

It is shown that the ignition condition (Lawson criterion) for inertial confinement fusion (ICF) can be cast in a form dependent on the only two parameters of the compressed fuel assembly that can be measured with existing techniques: the hot spot ion temperature (T{sub i}{sup h}) and the total areal density ({rho}R{sub tot}), which includes the cold shell contribution. A marginal ignition curve is derived in the {rho}R{sub tot}, T{sub i}{sup h} plane and current implosion experiments are compared with the ignition curve. On this plane, hydrodynamic equivalent curves show how a given implosion would perform with respect to the ignition condition when scaled up in the laser-driver energy. For 3<<T{sub i}{sup h}>{sub n}<6 keV, an approximate form of the ignition condition (typical of laser-driven ICF) is <T{sub i}{sup h}>{sub n}{sup 2.6}{center_dot}<{rho}R{sub tot}>{sub n}>50 keV{sup 2.6}{center_dot} g/cm{sup 2}, where <{rho}R{sub tot}>{sub n} and <T{sub i}{sup h}>{sub n} are the burn-averaged total areal density and hot spot ion temperature, respectively. Both quantities are calculated without accounting for the alpha-particle energy deposition. Such a criterion can be used to determine how surrogate D{sub 2} and subignited DT target implosions perform with respect to the one-dimensional ignition threshold.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydro-instability growth of perturbation seeds from alternate capsule-support strategies in indirect-drive implosions on National Ignition Facility

Hydrodynamic instability growth of the capsule support membranes (or “tents”) and fill tubes has been studied in spherical, glow discharge polymer plastic capsule implosions at the National Ignition Facility (NIF). In NIF implosions, the capsules are supported by tents because the nominal 10-μm thick fill tubes are not strong enough to support capsules by themselves. After it was recognized that the tents had a significant impact of implosion stability, new support methods were investigated, including thicker, 30-μm diameter fill tubes and cantilevered fill tubes, as described in this article. A new “sub-scale” version of the existing x-ray radiography platform was developed for measuring growing capsule perturbations in the acceleration phase of implosions. It was calibrated using hydrodynamic growth measurements of pre-imposed capsule modulations with Legendre modes of 60, 90, 110, and 140 at convergence ratios up to ~2.4. Subsequent experiments with 3-D perturbations have studied instability growth of 10-μm and 30-μm thick fill tubes to compare them with 30-nm thick tent perturbations at convergence ratios up to ~3. In other experiments, the perturbations from cantilevered fill tubes were measured and compared to the tent perturbations. The cantilevered fill tubes were supported by 12-μm thick SiC rods, offset by 100 μm, 200 μm, and 300 μm from the capsule surfaces. Based on these experiments, 30-μm thick fill tubes and 300-μm offset cantilevered fill tubes were recommended for further tests using layered deuterium-tritium implosions. In conclusion, the effects of x-ray shadowing during the drive and oxygen-induced perturbations during target assembly produced additional seeds for instabilities and were also measured in these experiments.

42 ENGINEERING↗

Review of hydro-instability experiments with alternate capsule supports in indirect-drive implosions on the National Ignition Facility

Hydrodynamic instability growth of capsule support membranes (or “tents”) has been recognized as one of the major contributors to the performance degradation in high-compression plastic capsule implosions at the National Ignition Facility (NIF). The capsules were supported by tents because the nominal 10-μm diameter fill tubes were not strong enough to support capsules by themselves in indirect-drive implosions on NIF. After it was recognized that the tents had a significant impact of implosion's stability, new alternative support methods were investigated. While some of these methods completely eliminated tent, other concepts still used tents, but concentrated on mitigating their impact. The tent-less methods included “fishing pole” reinforced fill tubes, cantilevered fill tubes, and thin-wire “tetra cage” supports. In the “fishing pole” concept, a 10-μm fill tube was inserted inside 30-μm fill tube for extra support with the connection point located 300 μm away from the capsule surface. The cantilevered fill tubes were supported by 12-μm thick SiC rods, offset by up to 300 μm from the capsule surfaces. In the “tetra-cage” concept, 2.5-μm thick wires (carbon nanotube yarns) were used to support a capsule. Other concepts used “polar tents” and a “foam-shell” to mitigate the effects of the tents. The “polar tents” had significantly reduced contact area between the tents and the capsule compared to the nominal tents. In the “foam-shell” concept, a 200-μm thick, 30 mg/cc SiO 2 foam layer was used to offset the tents away from the capsule surface in an attempt to mitigate their effects. These concepts were investigated in x-ray radiography experiments and compared with perturbations from standard tent support. The measured perturbations in the “fishing pole,” cantilevered fill tube, and “tetra-cage” concepts compared favorably with (were smaller than) nominal tent perturbations and were recommended for further testing for feasibility in layered DT implosions. The “polar tents” were tested in layered DT implosions with a relatively-stable “high-foot” drive showing an improvement in neutron yield in one experiment compared to companion implosions with nominal tents. Furthermore, this article reviews and summarizes recent experiments on these alternate capsule support concepts. In addition, the concept of magnetic levitation is also discussed.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Hydro-scaling of direct-drive cylindrical implosions at the OMEGA and the National Ignition Facility

Deceleration-phase Rayleigh–Taylor instability (RTI) growth during inertial confinement fusion capsule implosions significantly affects the performance as it mixes cold ablator material into the fuel. Precise measurements of such instability growth are essential for both validating the existing simulation codes and improving our predictive capability. RTI measurements on the inner surface of a spherical shell are limited and are often inferred indirectly at limited convergence. In contrast, cylindrical implosions allow for direct diagnostic access to the converging interface by imaging down the cylinder axis while retaining the effects of convergence. We have performed direct-drive cylindrical implosion experiments at both the OMEGA and the NIF laser facilities using scaled targets. RTI growth is demonstrated to be scale-invariant between the cylindrical targets at OMEGA and similar targets at the NIF, which are scaled up by a factor of three in the radial dimension. Single-mode (m = 0) instability growth factors of ~14 are measured at a convergence ratio (CR) ~ 2.5 with nearly identical mode growth at both scales. The measurements are in agreement with xRAGE radiation-hydrodynamics simulations. In addition, we have developed the Bayesian-inference-engine method to account for the variations in the target alignment, magnification, and the parallax effect in the measurement, allowing a more precise comparison between the experimental data and the simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effects of the components of coal hydro-liquefaction residue on its rheological characteristics

Four kinds of typical coal liquefaction residue samples, coming from Shenhua coal liquefaction pilot plant, were used to investigate the effects of components of residue, separation time, and temperature on its rheological characteristics. Coal liquefaction residue is a non-Newtonian pseudoplastic fluid whose apparent viscosity decreases with increasing shear rate. Moreover, the residue has high viscosity at the initial softening temperature, and its viscosity drops greatly with increasing temperature. The oil content in residue has a great effect on the decline of the apparent viscosity of residue. The asphaltene can increase the apparent viscosity at lower temperatures but decrease it at higher temperatures. However, the solid only increases the apparent viscosity as it can be neither softened nor dissolved to become fluid. After simulating the separation condition, it is found that prolonging the separation time and enhancing the separation temperature will increase the apparent viscosity of residue, which is bad for preventing pipes from being blocked. So choosing the right separation time and separation temperature is necessary to actual industrial production.

01 COAL, LIGNITE, AND PEAT↗

A CR-HYDRO-NEI MODEL OF MULTI-WAVELENGTH EMISSION FROM THE VELA JR. SUPERNOVA REMNANT (SNR RX J0852.0-4622)

Based largely on energy budget considerations and the observed cosmic-ray (CR) ionic composition, supernova remnant (SNR) blast waves are the most likely sources of CR ions with energies at least up to the 'knee' near 10{sup 15} eV. Shocks in young shell-type TeV-bright SNRs are surely producing TeV particles, but the emission could be dominated by ions producing {pi}{sup 0}-decay emission or electrons producing inverse Compton gamma rays. Unambiguously identifying the GeV-TeV emission process in a particular SNR will not only help pin down the origin of CRs, it will also add significantly to our understanding of the diffusive shock acceleration (DSA) mechanism and improve our understanding of supernovae and the impact SNRs have on the circumstellar medium. In this study, we investigate the Vela Jr. SNR, an example of TeV-bright non-thermal SNRs. We perform hydrodynamic simulations coupled with nonlinear DSA and non-equilibrium ionization near the forward shock to confront currently available multi-wavelength data. We find, with an analysis similar to that used earlier for SNR RX J1713.7-3946, that self-consistently modeling the thermal X-ray line emission with the non-thermal continuum in our one-dimensional model strongly constrains the fitting parameters, and this leads convincingly to a leptonic origin for the GeV-TeV emission for Vela Jr. This conclusion is further supported by applying additional constraints from observation, including the radial brightness profiles of the SNR shell in TeV gamma rays, and the spatial variation of the X-ray synchrotron spectral index. We will discuss implications of our models on future observations by the next-generation telescopes.

79 ASTRONOMY AND ASTROPHYSICS↗

A CR-hydro-NEI model of the structure and broadband emission from Tycho's supernova remnant

Tycho's supernova remnant (SNR) is well-established as a source of particle acceleration to very high energies. Constraints from numerous studies indicate that the observed γ-ray emission results primarily from hadronic processes, providing direct evidence of highly relativistic ions that have been accelerated by the SNR. Here we present an investigation of the dynamical and spectral evolution of Tycho's SNR by carrying out hydrodynamical simulations that include diffusive shock acceleration of particles in the amplified magnetic field at the forward shock of the SNR. Our simulations provide a consistent view of the shock positions, the nonthermal emission, the thermal X-ray emission from the forward shock, and the brightness profiles of the radio and X-ray emission. We compare these with the observed properties of Tycho to determine the density of the ambient material, the particle acceleration efficiency and maximum energy, the accelerated electron-to-proton ratio, and the properties of the shocked gas downstream of the expanding SNR shell. We find that evolution of a typical Type Ia supernova in a low ambient density (n {sub 0} ∼ 0.3 cm{sup –3}), with an upstream magnetic field of ∼5 μG, and with ∼16% of the SNR kinetic energy being converted into relativistic electrons and ions through diffusive shock acceleration, reproduces the observed properties of Tycho. Under such a scenario, the bulk of observed γ-ray emission at high energies is produced by π{sup 0}-decay resulting from the collisions of energetic hadrons, while inverse-Compton emission is significant at lower energies, comprising roughly half of the flux between 1 and 10 GeV.

79 ASTRONOMY AND ASTROPHYSICS↗

Particle concentration at planet-induced gap edges and vortices. I. Inviscid three-dimensional hydro disks

We perform a systematic study of the dynamics of dust particles in protoplanetary disks with embedded planets using global two-dimensional and three-dimensional inviscid hydrodynamic simulations. Lagrangian particles have been implemented into the magnetohydrodynamic code Athena with cylindrical coordinates. We find two distinct outcomes depending on the mass of the embedded planet. In the presence of a low-mass planet (8 M {sub ⊕}), two narrow gaps start to open in the gas on each side of the planet where the density waves are shocked. These shallow gaps can dramatically affect particle drift speed and cause significant, roughly axisymmetric dust depletion. On the other hand, a more massive planet (>0.1 M{sub J} ) carves out a deeper gap with sharp edges, which are subject to Rossby wave instability leading to vortex formation. Particles with a wide range of sizes (0.02 < Ωt{sub s} < 20) are trapped and settle to the midplane in the vortex, with the strongest concentration for particles with Ωt{sub s} ∼ 1. The dust concentration is highly elongated in the φ direction, and can be as wide as four disk scale heights in the radial direction. Dust surface density inside the vortex can be increased by more than a factor of 10{sup 2} in a very non-axisymmetric fashion. For very big particles (Ωt{sub s} >> 1) we find strong eccentricity excitation, in particular around the planet and in the vicinity of the mean motion resonances, facilitating gap openings there. Our results imply that in weakly turbulent protoplanetary disk regions (e.g., the {sup d}ead zone{sup )} dust particles with a very wide range of sizes can be trapped at gap edges and inside vortices induced by planets with M{sub p} < M{sub J} , potentially accelerating planetesimal and planet formation there, and giving rise to distinctive features that can be probed by ALMA and the Extended Very Large Array.

79 ASTRONOMY AND ASTROPHYSICS↗

THREE-DIMENSIONAL BOLTZMANN HYDRO CODE FOR CORE COLLAPSE IN MASSIVE STARS. I. SPECIAL RELATIVISTIC TREATMENTS

We propose a novel numerical method for solving multi-dimensional, special relativistic Boltzmann equations for neutrinos coupled with hydrodynamics equations. This method is meant to be applied to simulations of core-collapse supernovae. We handle special relativity in a non-conventional way, taking account of all orders of v/c. Consistent treatment of the advection and collision terms in the Boltzmann equations has been a challenge, which we overcome by employing two different energy grids: Lagrangian remapped and laboratory fixed grids. We conduct a series of basic tests and perform a one-dimensional simulation of core-collapse, bounce, and shock-stall for a 15 M {sub ☉} progenitor model with a minimum but essential set of microphysics. We demonstrate in the latter simulation that our new code is capable of handling all phases in core-collapse supernova. For comparison, a non-relativistic simulation is also conducted with the same code, and we show that they produce qualitatively wrong results in neutrino transfer. Finally, we discuss a possible incorporation of general relativistic effects into our method.

79 ASTRONOMY AND ASTROPHYSICS↗

thornado-hydro: towards discontinuous Galerkin methods for supernova hydrodynamics

The toolkit for high-order neutrino-radiation hydrodynamics (thornado) is being developed for simulations of core-collapse supernovae (CCSNe) and related problems. Current capabilities in thornado include solvers for the Euler equations — in non-relativistic and special relativistic limits — and the two-moment model of neutrino transport. The spatial discretization in thornado is based on the discontinuous Galerkin (DG) method, which is receiving increased attention from the computational astrophysics community. In this paper, we provide an overview of the numerical methods for the Euler equations in thornado, and present some encouraging preliminary numerical results from a set of basic tests in one and two spatial dimensions.

Endeve, Eirik↗

HALO EXPANSION IN COSMOLOGICAL HYDRO SIMULATIONS: TOWARD A BARYONIC SOLUTION OF THE CUSP/CORE PROBLEM IN MASSIVE SPIRALS

A clear prediction of the cold dark matter (CDM) model is the existence of cuspy dark matter halo density profiles on all mass scales. This is not in agreement with the observed rotation curves of spiral galaxies, challenging on small scales the otherwise successful CDM paradigm. In this work we employ high-resolution cosmological hydrodynamical simulations to study the effects of dissipative processes on the inner distribution of dark matter in Milky Way like objects (M Almost-Equal-To 10{sup 12} M{sub Sun }). Our simulations include supernova feedback, and the effects of the radiation pressure of massive stars before they explode as supernovae. The increased stellar feedback results in the expansion of the dark matter halo instead of contraction with respect to N-body simulations. Baryons are able to erase the dark matter cuspy distribution, creating a flat, cored, dark matter density profile in the central several kiloparsecs of a massive Milky-Way-like halo. The profile is well fit by a Burkert profile, with fitting parameters consistent with the observations. In addition, we obtain flat rotation curves as well as extended, exponential stellar disk profiles. While the stellar disk we obtain is still partially too thick to resemble the Milky Way thin disk, this pilot study shows that there is enough energy available in the baryonic component to alter the dark matter distribution even in massive disk galaxies, providing a possible solution to the long-standing problem of cusps versus cores.

79 ASTRONOMY AND ASTROPHYSICS↗

Minijet quenching in a concurrent jet + hydro evolution and the nonequilibrium quark-gluon plasma

Minijets, created by perturbative hard QCD collisions at moderate energies, can represent a significant portion of the total multiplicity of a heavy-ion collision event. Since their transverse momenta are initially larger than the typical saturation scale describing the bulk of the equilibrating quark-gluon plasma (QGP), they ought to be described through the physics of parton energy loss. Indeed, their typical stopping distances are larger than the usual hydrodynamization time, so they do not in general hydrodynamize at the same pace than the bulk of the collision. Therefore, in general minijets cannot be described solely by a unique preequilibrium stage that bridges the initial, overoccupied glasma state, with the hydrodynamical evolution. In this work we make use of a new concurrent minijet+hydrodynamic framework in which the properties of the hydrodynamically evolving QGP are modified due to the injection of energy and momentum from the minijets. We study the system for different choices of the minimum transverse momentum associated with minijet production. In order to achieve a realistic description of charged particle multiplicity, the amount of entropy associated to the low- x initial state needs to be reduced. Moreover, the fact that the injected momentum from the randomly oriented minijets is not correlated with the spatial gradients of the system reduces overall flow, and the value of the QGP transport coefficients needs to be reduced accordingly in order to describe the measured flow coefficients in experiments. They are, in effect, an important new source of fluctuations, resulting in a spikier, notably modified hydrodynamical evolution when compared to the scenario in which the presence of minijets is ignored. We avow that their abundance makes it necessary to include their physics in holistic descriptions of heavy-ion collisions. We discuss the impact of the minijets on a number of observables, such as p T spectra and p T -differential flow v n for a wide range of centrality classes. In contrast to elliptic, triangular or quadrangular flow, here we find that directed flow, v 1 , has the strongest potential to discriminate between different minijet production rates.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗