Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H- source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

He-3 and other lunar volatiles

Constraints are considered and estimates are given for the abundances of He-3, other noble gases, and chemically reactive volatiles (e.g., H, C, N, S, F, Cl) on the Moon. For the case of surface inventories, solar wind particles implanted into grains on the surface of the Moon provide an accessible, though not necessarily abundant, source of H, C, N and the noble gases. Solar wind implanted species are concentrated in the infest grain sized, and are only found in the upper few meters of the regolith, where there are grains that have been directly exposed to the Sun. Elemental abundances in surface soils are typically 10s of mg/g, and vary according to the exposure history of the soil. The abundance of the rare, but possibly economically important, isotope He-3 is typically a few mg/g. The largest uncertainty in estimates of the total lunar abundance of solar wind implanted species comes from the lack of knowledge of their distribution with depth below the upper meter or two. For the case of bulk inventories, constraints resulting from lunar sample analyses and from physical chemical models of volatile behavior during the hypothesized giant impact origin of the Moon is used to give estimated abundances.

Fegley, B., Jr.↗

Ly{alpha} EMITTING GALAXIES AS EARLY STAGES IN GALAXY FORMATION

We present optical spectroscopy of two samples of Galaxy Evolution Explorer grism selected Ly{alpha} emitters (LAEs): one at z = 0.195-0.44 and the other at z = 0.65-1.25. We have also observed a comparison sample of galaxies in the same redshift intervals with the same UV magnitude distributions but with no detected Ly{alpha}. We use the optical spectroscopy to eliminate active galactic nuclei and to obtain the optical emission-line properties of the samples. We compare the luminosities of the LAEs in the two redshift intervals and show that there is dramatic evolution in the maximum Ly{alpha} luminosity over z = 0-1. Focusing on the z = 0.195-0.44 samples alone, we show that there are tightly defined relations between all of the galaxy parameters and the rest-frame equivalent width (EW) of H{alpha}. The higher EW(H{alpha}) sources all have lower metallicities, bluer colors, smaller sizes, and less extinction, consistent with their being in the early stages of the galaxy formation process. We find that 75% {+-} 12% of the LAEs have EW(H{alpha}) >100 A and, conversely, that 31% {+-} 13% of galaxies with EW(H{alpha}) >100 A are LAEs. We correct the broadband magnitudes for the emission-line contributions and use spectral synthesis fits to estimate the ages of the galaxies. We find a median age of 1.1 x 10{sup 8} yr for the LAE sample and 1.4 x 10{sup 9} yr for the UV-continuum sample without detected Ly{alpha}. The median metallicity of the LAE sample is 12 + log (O/H) = 8.24, or about 0.4 dex lower than the UV-continuum sample.

79 ASTRONOMY AND ASTROPHYSICS↗

Ion energization in upwelling ion events

A source of H(+), He(+), O(+), and N(+) outflow from the ionosphere has been identified near the polar cusp/cleft using the Dynamics Explorer/retarding ion mass spectrometer data set. This ion outflow termed 'upwelling ions' is characterized by large outfluxes of H(+) and O(+) ions and high transverse ion temperatures. This paper reports on the associated particle and field characteristics of one such upwelling ion event on March 12, 1982. Field-aligned currents and strong E x B convection channels are associated with the event as well as strong broadband plasma wave emission. One or all of these sources may play an important role in the ion energization in this region.

Waite, J. H., Jr.↗

A Theoretical Investigation of Radiolytic H 2 Generation from Solids

Hydrogen generation from materials in nuclear materials storage is of critical interest due to the potential for pressurization and/or flammability issues. Studies have focused on aqueous systems or those with minor amounts of physisorbed water, since conventional knowledge identifies the radiolytic decomposition of water as the source of H 2 gas. Furthermore, the approach to characterize gas generation is typically strictly empirical, relying on determination of G-values from which production in systems is estimated. Interestingly, exploratory work at SRNL on gamma exposure to fully-dried solids with chemically-bound water that are typical of those produced on aluminium-clad nuclear fuel in reactor and post-discharge storage has shown a profound production of hydrogen (as the sole gaseous species) from fully dried boehmite (γ -AlOOH or Al 2 O 3 •H 2 O) powders and no observable hydrogen from gibbsite (γ-Al(OH) 3 or Al 2 O 3 •3H 2 O) under gamma irradiation from cobalt-60. This observation is significant in that gibbsite is known to thermally decompose at 80°C whereas boehmite is stable to 400°C. Radiation damage can have various effects on solids, including heating, bond breaking, and rearrangements in the bonding structure. For example, a molecule can be ionized resulting in the generation of free electrons which can, in turn, ionize another molecule. Alternately, reactive radical species such as •OH or cation species may be formed, which can go on to change bonding structures.

08 HYDROGEN↗

A First Comparison of Millimeter Continuum and Mg ii Ultraviolet Line Emission from the Solar Chromosphere

We present joint observations of the Sun by the Atacama Large Millimeter/submillimeter Array (ALMA) and the Interface Region Imaging Spectrograph ( IRIS ). Both millimeter/submillimeter- λ continuum emission and ultraviolet (UV) line emission originate from the solar chromosphere and both have the potential to serve as powerful and complementary diagnostics of physical conditions in this enigmatic region of the solar atmosphere. The observations were made of a solar active region on 2015 December 18 as part of the ALMA science verification effort. A map of the Sun’s continuum emission was obtained by ALMA at a wavelength of 1.25 mm (239 GHz). A contemporaneous map was obtained by IRIS in the Mg ii h doublet line at 2803.5 Å. While a clear correlation between the 1.25 mm brightness temperature T{sub B} and the Mg ii h line radiation temperature T {sub rad} is observed, the slope is <1, perhaps as a result of the fact that these diagnostics are sensitive to different parts of the chromosphere and that the Mg ii h line source function includes a scattering component. There is a significant difference (35%) between the mean T{sub B} (1.25 mm) and mean T {sub rad} (Mg ii). Partitioning the maps into “sunspot,” “quiet areas,” and “plage regions” we find the relation between the IRIS Mg ii h line T {sub rad} and the ALMA T {sub B} region-dependent. We suggest this may be the result of regional dependences of the formation heights of the IRIS and ALMA diagnostics and/or the increased degree of coupling between the UV source function and the local gas temperature in the hotter, denser gas in plage regions.

79 ASTRONOMY AND ASTROPHYSICS↗

Polarization and variability of compact sources measured in Planck time-ordered data

This paper introduces a new Planck Catalog of Polarized and Variable Compact Sources (PCCS-PV) comprising 153 sources, the majority of which are extragalactic. The data include both the total flux density and linear polarization measured by Planck with frequency coverage from 30 to 353 GHz, and temporal spacing ranging from days to years. We classify most sources as beamed, extragalactic radio sources; the catalog also includes several radio galaxies, Seyfert galaxies, and Galactic and Magellanic Cloud sources, including H II regions and planetary nebulae. An advanced extraction method applied directly to the multifrequency Planck time-ordered data, rather than the mission sky maps, was developed to allow an assessment of the variability of polarized sources. Our analysis of the time-ordered data from the Planck mission, tod2flux, allowed us to catalog the time-varying emission and polarization properties for these sources at the full range of polarized frequencies employed by Planck, 30-353 GHz. PCCS-PV provides the time-and frequency-dependent, polarized flux densities for all 153 sources. To illustrate some potential applications of the PCCS-PV, we conducted preliminary comparisons of our measurements of selected sources with published data from other astronomical instruments. In summary, we find general agreement between the Planck and the Institut de Radioastronomie Millimétrique (IRAM) polarization measurements as well as with the Metsähovi 37 GHz values at closely similar epochs. Here, these combined measurements also show the value of PCCS-PV results and the PCCS2 catalog for filling in missing spectral (or temporal) coverage and helping to define the spectral energy distributions of extragalactic sources. In turn, these results provide useful clues as to the physical properties of the sources.

79 ASTRONOMY AND ASTROPHYSICS↗

Star formation in NGC 4449: MAMA-detector UV imagery and Fabry-Perot Balmer-line imagery

Using far-ultraviolet (FUV) and Balmer-line imagery, we investigate the star formation history of 22 large OB complexes in the Magellanic irregular galaxy NGC 4449. The FUV luminosity of NGC 4449 is comparable to those of late-type spirals and is greater than that of the LMC by approximately 2.4 mag, indicating substantial star formation in the last 10(exp 8) yr. FUV data were taken using a sounding-rocket telescope with a Multianode Microchannel Array (MAMA) detector, and Balmer-line data were taken using the Goddard Fabry-Perot Imager. The resulting imagery shows bright, roughly coincident FUV and H alpha sources throughout the extent of the visible galaxy. We model these sources using cluster-evolution codes. Although all sources are a few Myr old, clear age differences are found. In particular, several of the most recently active star formation regions are located together in the galaxy's northern periphery, which is apparently coincident with a large H I reservoir. The brightest and most massive OB complexes are found along the northeast-southwest surface brightness ridgeline (the 'bar'). Over the entire galaxy, star formation rates are consistent on timescales of 10(exp 6), 10(exp 8), and 10(exp 9) yr. A history of recent star formation is suggested with two main episodes, one predominantly in the bar ending approximately 5 Myr ago, and an ongoing one associated with an observed H I cloud.

Hill, Robert S.↗

ALFALFA DISCOVERY OF THE NEARBY GAS-RICH DWARF GALAXY LEO P. I. H I OBSERVATIONS

The discovery of a previously unknown 21 cm H I line source identified as an ultra-compact high velocity cloud in the ALFALFA survey is reported. The H I detection is barely resolved by the Arecibo 305 m telescope {approx}4' beam and has a narrow H I linewidth (half-power full width of 24 km s{sup -1}). Further H I observations at Arecibo and with the Very Large Array corroborate the ALFALFA H I detection, provide an estimate of the H I radius, {approx}1' at the 5 Multiplication-Sign 10{sup 19} cm{sup -2} isophote, and show the cloud to exhibit a velocity field which, if interpreted as disk rotation, has an amplitude of {approx_equal}9.0 {+-} 1.5 km s{sup -1}. In other papers, Rhode et al. show the H I source to have a resolved stellar counterpart and ongoing star forming activity, while Skillman et al. reveal it as having extremely low metallicity: 12 + log (O/H) = 7.16 {+-} 0.04. The H I mass to stellar mass ratio of the object is found to be 2.6. We use the Tully-Fisher template relation in its baryonic form to obtain a distance estimate D{sub Mpc}=1.3{sup +0.9}{sub -0.5}. Additional constraints on the distance are also provided by the optical data of Rhode et al. and McQuinn et al., both indicating a distance in the range of 1.5 to 2.0 Mpc. The three estimates are compatible within their errors. The object appears to be located beyond the dynamical boundaries of, but still in close proximity to the Local Group. Its pristine properties are consistent with the sedate environment of its location. At a nominal distance of 1.75 Mpc, it would have an H I mass of {approx_equal} 1.0 Multiplication-Sign 10{sup 6} M {sub Sun }, a stellar mass of {approx_equal} 3.6 Multiplication-Sign 10{sup 5} M {sub Sun }, and a dynamical mass within the H I radius of {approx_equal} 1.5 Multiplication-Sign 10{sup 7} M {sub Sun }. This discovery supports the idea that optically faint-or altogether dark-low mass halos may be detectable through their non-stellar baryons.

79 ASTRONOMY AND ASTROPHYSICS↗

Hot filament performance in a Freeman ion source

Here, we report on the simulation results of the hot tungsten filament behavior in a Freeman ions source installed in the LANL electro-magnetic isotope separator (EMIS). The Freeman source enables us to ionize and extract high intensity single-charge ion beams from different gases as well as from various solid materials in order to purify the content of a selected isotope. We have modified our LANSCE H– Ion Source Filament Model to calculate the ion source working parameters during a beam production cycle and estimate the ion source filament lifetime. Two main mass erosion processes of the hot cathode in a Freeman ion source are included: thermal evaporation and plasma sputtering. The initial working temperature of the ion source filament was estimated to be in range of 2400 to 2500 K. The filament model shows that the plasma sputtering rate is several magnitude of order higher than the thermal evaporation rate. The results of ion source modeling were compared with recorded data during the EMIS beam production runs using krypton noble gas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

H Ly-alpha transmittance of thin foils of C, Si/C, and Al/C for keV particle detectors

A class of instruments designed for remote sensing of space plasmas by measuring energetic neutral atoms (ENA) uses a thin foil as both a signal generator and a light shield. An ENA imager must look directly at the ENA source region, which is also usually an intense source of H Ly-alpha (1216 A) photons. It is desirable to minimize the energy threshold for ENA detectors, at the same time maximizing the blocking of H Ly-alpha. Optimizing filter design to meet these two contrary requirements has led us to measure the transmittance of thin C, Si/C, and Al/C foils at H Ly-alpha. Our results indicate that (1) transmittance of less than 0.0007 can be achieved with 7 micro-g/sq cm Si on 1.7 micro-g/sq cm C; (2) an Si/C composite foil with a thin carbon layer is more effective in blocking UV radiation while having the lowest energy threshold of all the foils measured; and (3) transmittance of Si/C foils of known Si and C thicknesses cannot be accurately predicted, but must be measured.

Drake, V. A.↗

Setting the H-mode pedestal structure: variations of particle source location using gas puff and pellet fueling

Experiments in DIII-D show that a particle source location inside the top of the H-mode pedestal (pellets) maintains a higher pedestal pressure than an edge source (gas fueling) through a widening of the electron temperature pedestal with reduction of the temperature gradient. The effect of these two fueling schemes on the H-mode pedestal structure was examined in DIII-D by comparing controlled pellet-fueled and gas-fueled discharges across a fueling scan up to 40 torr 1 s –1 . High resolution electron profiles reveal that gas fueling lowers the pedestal pressure as the density profile shifts radially outwards and the separatrix density increases, while pellet fueling maintains a constant pedestal pressure. The neutral source locations from pellets and gas are determined with the PELLET and UEDGE codes, respectively, and quantify the particle source localization. Pellets provide significant ionization inside the pedestal top while gas puffing localizes ionization in the scrape-off-layer and pedestal foot, broadly consistent with the density profile structure influenced by the source. ELMs are observed to increase in frequency and reduce impurity content as fueling is increased. Stability analysis with ELITE shows that both conditions are near the type-I ELM corner of the peeling–ballooning stability diagram, which is altered significantly by the introduction of pellets. Since transport mechanisms are not observed to change substantially with particle source location, wider pedestals allow the pellet-fueled discharges to retain higher pedestal temperatures at similar pedestal densities. EPED1 is tested to capture the pedestal pressure, under-predicting the height with pellets and over-predicting the height with gas by ~15%. Overall, these results have important implications for future reactors where pellet fueling will be the primary particle source due to an opaque scrape-off-layer by showing that the neutral source location plays a role in setting the structure of the H-mode pedestal.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

H 2 generation by the 10 B(n,α) 7 Li reaction in high temperature water

H 2 produced in water from the 10 B(n,α) 7 Li fission reaction has been measured up to 300 °C. Thermal energy neutrons from the Rhode Island Nuclear Science Center's 2 MW reactor interact with boric acid-containing water in temperature-controlled high-pressure cells made from tubing of either titanium or zirconium alloy. After exposure for a minimum of 1 h, the solution sample is extracted and sparged with argon. The H 2 entrained by the sparging gas is sampled with a small mass spectrometer. A small amount of sodium is included in the boric acid solution so that after sparging, samples can be collected for 24 Na activation measurements in a gamma spectrometer to determine the neutron exposure and thus the total energy deposited in solution. The G-value (μmol/J) for H 2 production is obtained for water at a pressure of 25 MPa, over a temperature range from 20 °C to 300 °C. The weak temperature dependence of this yield between 150 °C and 200 °C demonstrates that the bimolecular reaction of pairs of e$^{–}_{aq}$ is a very minor source of H 2 in high LET tracks.

10B↗

Project X RFQ EM Design

Project X is a proposed multi-MW proton facility at Fermi National Accelerator Laboratory (FNAL). The Project X front-end would consist of an H- ion source, a low-energy beam transport (LEBT), a CW 162.5 MHz radio-frequency quadrupole (RFQ) accelerator, and a medium-energy beam transport (MEBT). Lawrence Berkeley National Laboratory (LBNL) and FNAL collaboration is currently developing the designs for various components in the Project X front end. This paper reports the detailed EM design of the CW 162.5 MHz RFQ that provides bunching of the 1-10 mA H- beam with acceleration from 30 keV to 2.1 MeV.

43 PARTICLE ACCELERATORS↗

Design improvements to the SNS ion source and diagnostics

The U.S. Spallation Neutron Source (SNS) is a state-of-the-art neutron scattering facility delivering the world's most intense pulsed-neutron beams to a wide array of instruments which are used to conduct investigations in many fields of science and engineering. The accelerator system is fed by an RF-driven, multicusp, H - ion source which nominally provides pulsed beam currents of 50-60 mA (1ms, 60Hz). This report provides a discussion of ongoing design improvements to the SNS ion source and Low Energy Beam Transport (LEBT) as well as diagnostic upgrades undertaken since the previous ICIS conference. These improvements include (i) simple mechanical modifications to the source outlet aperture which resulted in dramatically increased extracted beam current and comparable or lower emittance at similar beam currents, (ii) design improvements to the LEBT chopper target which will enable full power beam-dumping during physics studies, (iii) refinement of the SNS Allison emittance scanner that has enabled the first reliable LEBT beam measurements at full beam power (65kV, 50-100mA, 1ms, 60Hz) on the SNS ion source test stand and (iv) the implementation of a thermal imaging camera for the monitoring the LEBT electrode temperatures. (v) The design of an advanced Cs system, capable of more efficient Cs utilization with significantly lower Cs losses from the source is also presented. Mechanical details, computational simulations and experimental results are discussed within the context of these improvements.

47 OTHER INSTRUMENTATION↗

A measurement of the cosmic-ray H-2 and He-3 spectra and H-2/He-4 and He-3/He-4 ratios in 1989

The energy spectra of H-2 and H-3 nuclei up to energies of 450 and 800 MeV nucleon, respectively, were measured during a balloon flight of the NASA/NMSU Balloon Borne Magnet Facility on September 5, 1989. These isotopes were cleanly resolved from the more abundant H-1 and He-4 using a measurement of rigidity versus velocity as measured in a high-resolution scintillation counter. After correction for atmospheric secondaries the measured H-2/He-4 and He-3/He-4 ratios are both consistent with the production expected if H-1 and He-4 have the same path length in the galaxy as heavier cosmic-ray nuclei such as C and Fe, to within about 20 percent. Solar modulation effects play an important role in this uncertainty. This result favors a generally similar propagation history, along with similar types of sources for H-1 and He-4 and the heavier cosmic-ray nuclei.

Webber, W. R.↗

Algorithmic Patterns for $$\mathcal {H}$$-Matrices on Many-Core Processors

In this work, we consider the reformulation of hierarchical ( \(\mathcal {H}\) ) matrix algorithms for many-core processors with a model implementation on graphics processing units (GPUs). \(\mathcal {H}\) matrices approximate specific dense matrices, e.g., from discretized integral equations or kernel ridge regression, leading to log-linear time complexity in dense matrix–vector products. The parallelization of \(\mathcal {H}\) matrix operations on many-core processors is difficult due to the complex nature of the underlying algorithms. While previous algorithmic advances for many-core hardware focused on accelerating existing \(\mathcal {H}\) matrix CPU implementations by many-core processors, we here aim at totally relying on that processor type. As main contribution, we introduce the necessary parallel algorithmic patterns allowing to map the full \(\mathcal {H}\) matrix construction and the fast matrix–vector product to many-core hardware. In this work, crucial ingredients are space filling curves, parallel tree traversal and batching of linear algebra operations. The resulting model GPU implementation hmglib is the, to the best of the authors knowledge, first entirely GPU-based Open Source \(\mathcal {H}\) matrix library of this kind. We investigate application examples as present in kernel ridge regression, Gaussian Process Regression and kernel-based interpolation. In this context, an in-depth performance analysis and a comparative performance study against a standard multi-core CPU \(\mathcal {H}\) matrix library highlights profound speedups of our many-core parallel approach.

97 MATHEMATICS AND COMPUTING↗

DISCOVERY OF z {approx} 8 GALAXIES IN THE HUBBLE ULTRA DEEP FIELD FROM ULTRA-DEEP WFC3/IR OBSERVATIONS

We utilize the newly acquired, ultra-deep WFC3/IR observations over the Hubble Ultra Deep Field (HUDF) to search for star-forming galaxies at z {approx} 8-8.5, only 600 million years from recombination, using a Y {sub 105}-dropout selection. The new 4.7 arcmin{sup 2} WFC3/IR observations reach to {approx}28.8 AB mag (5{sigma}) in the Y {sub 105} J {sub 125} H {sub 160} bands. These remarkable data reach {approx}1.5 AB mag deeper than the previous data over the HUDF, and now are an excellent match to the HUDF optical ACS data. For our search criteria, we use a two-color Lyman break selection technique to identify z {approx} 8-8.5Y {sub 105}-dropouts. We find five likely z {approx} 8-8.5 candidates. The sources have H {sub 160}-band magnitudes of {approx}28.3 AB mag and very blue UV-continuum slopes, with a median estimated {beta} of {approx}<-2.5 (where f {sub {lambda}} {proportional_to} {lambda}{sup {beta}}). This suggests that z {approx} 8 galaxies are not only essentially dust free but also may have very young ages or low metallicities. The observed number of Y {sub 105}-dropout candidates is smaller than the 20 {+-} 6 sources expected assuming no evolution from z {approx} 6, but is consistent with the five expected extrapolating the Bouwens et al. luminosity function (LF) results to z {approx} 8. These results provide evidence that the evolution in the LF seen from z {approx} 7 to z {approx} 3 continues to z {approx} 8. The remarkable improvement in the sensitivity of WFC3/IR has enabled Hubble Space Telescope to cross a threshold, revealing star-forming galaxies at z{approx} 8-9.

79 ASTRONOMY AND ASTROPHYSICS↗

Understanding the mechanisms of interfacial reactions during TiO{sub 2} layer growth on RuO{sub 2} by atomic layer deposition with O{sub 2} plasma or H{sub 2}O as oxygen source

In this paper, TiO{sub 2} layers grown on RuO{sub 2} by atomic layer deposition (ALD) using tetrakis (dimethyla-mino) titanium (TDMAT) and either oxygen plasma or H{sub 2}O as oxygen source were analyzed using X-ray diffraction (XRD), Raman spectroscopy, and depth-resolved X-ray Photoelectron spectroscopy (XPS). The main objective is to investigate the surface chemical reactions mechanisms and their influence on the TiO{sub 2} film properties. The experimental results using XRD show that ALD deposition using H{sub 2}O leads to anatase TiO{sub 2} whereas a rutile TiO{sub 2} is obtained when oxygen-plasma is used as oxygen source. Depth-resolved XPS analysis allows to determine the reaction mechanisms at the RuO{sub 2} substrate surface after growth of thin TiO{sub 2} layers. Indeed, the XPS analysis shows that when H{sub 2}O assisted ALD process is used, intermediate Ti{sub 2}O{sub 3} layer is obtained and RuO{sub 2} is reduced into Ru as evidenced by high resolution transmission electron microscopy. In this case, there is no possibility to re-oxidize the Ru surface into RuO{sub 2} due to the weak oxidation character of H{sub 2}O and an anatase TiO{sub 2} layer is therefore grown on Ti{sub 2}O{sub 3}. In contrast, when oxygen plasma is used in the ALD process, its strong oxidation character leads to the re-oxidation of the partially reduced RuO{sub 2} following the first Ti deposition step. Consequently, the RuO{sub 2} surface is regenerated, allowing the growth of rutile TiO{sub 2}. A surface chemical reaction scheme is proposed that well accounts for the observed experimental results.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗