Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Fusion Simulation Project”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Experimental verification of the role of electron pressure in fast magnetic reconnection with a guide field

We report detailed laboratory observations of the structure of a reconnection current sheet in a two-fluid plasma regime with a guide magnetic field. We observe and quantitatively analyze the quadrupolar electron pressure variation in the ion-diffusion region, as originally predicted by extended magnetohydrodynamics simulations. The projection of the electron pressure gradient parallel to the magnetic field contributes significantly to balancing the parallel electric field, and the resulting cross-field electron jets in the reconnection layer are diamagnetic in origin. Furthermore, these results demonstrate how parallel and perpendicular force balance are coupled in guide field reconnection and confirm basic theoretical models of the importance of electron pressure gradients for obtaining fast magnetic reconnection.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

SciDAC Center for Plasma Edge Simulation

This project with a total funding of $592,998 for six years has partially supported four postdoctoral researchers at the University of California, Irvine (UCI). The UCI team has formulated electrostatic and electromagnetic global gyrokinetic particle simulation models with kinetic electrons, implemented these models in the edge code XGC1, performed benchmark between GTC and XGC1, developed computational tools for gyrokinetic particle simulation in tokamak edge geometry, and initiated preparatory study of edge turbulence using GTC code. The research results has been published in 12 papers and presented at many international and national conferences.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Analysis of wave mode content in fully turbulent, moderately collisional plasma laboratory experiment and kinetic simulation. Final Report

A final report of the activities of Bryn Mawr College for award DE-SC0018258. The major goal for the project is to make magnetic and Langmuir-probe-based density fluctuations measurements using identical diagnostic and acquisition setups on two different laboratory-based turbulent plasma devices: SSX at Swarthmore College and a new plasma source in development at Bryn Mawr College (BMX). We propose to generate single-point correlation and k-filtering metrics using these experimental measurements. These metrics will be compared directly to kinetic simulations of the experimental environments in order to determine wave mode content of the laboratory turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collaborative Research: Analysis of wave mode content in fully turbulent, moderately collisional plasma laboratory experiment and kinetic simulation

Our major goal for the project is to make magnetic and Langmuir-probe-based density fluctuations measurements using identical diagnostic and acquisition setups on two different laboratory-based turbulent plasma devices: SSX at Swarthmore College and a new plasma source in development at Bryn Mawr College (BMX). We propose to generate single-point correlation and k-filtering metrics using these experimental measurements. These metrics will be compared directly to kinetic simulations of the experimental environments in order to determine wave mode content of the laboratory turbulence.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Validation of Simulation Models for Wall-Connected Scrape off Layer Currents during MHD Activity in the HBT-EP Tokamak (Final Report)

This is the final report for the DOE award DE-SC0021325, titled “Validation of Simulation Models for Wall-Connected Scrape off Layer Currents during MHD Activity in the HBT-EP Tokamak” for the period September 1, 2020 – May 31, 2023. This award is part of a broader collaborative project, which supported training of a PhD student at Columbia University under the joint supervision of Dr. Hansen and Columbia project members. The award supported research into computational models for plasma and 3D conducting structures in the vicinity relevant to tokamak disruptions and other mode activity (eg. RWMs) using the NIMROD, and PSI-Tet, codes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Detection of 14 MeV neutrons in high temperature environment up to 500 deg. C using 4H-SiC based diode detector

In reactor technology and industrial applications detection of fast and thermal neutrons plays a crucial role in getting relevant information about the reactor environment and neutron yield. The inevitable elevated temperatures make neutron yield measurements problematic. Out of the currently available semiconductors 4H-SiC seems to be the most suitable neutron detector material under extreme conditions due to its high heat and radiation resistance, large band-gap and lower cost of production than in case of competing diamond detectors. In the framework of the European I-Smart project, optimal {sup 4}H-SiC diode geometries were developed for high temperature neutron detection and have been tested with 14 MeV fast neutrons supplied by a deuterium-tritium neutron generator with an average neutron flux of 10{sup 10}-10{sup 11} n/(s*cm{sup 2}) at Neutron Laboratory of the Technical University of Dresden in Germany from room temperatures up to several hundred degrees Celsius. Based on the results of the diode measurements, detector geometries appear to play a crucial role for high temperature measurements up to 500 deg. C. Experimental set-ups using SiC detectors were constructed to simulate operation in the harsh environmental conditions found in the tritium breeding blanket of the ITER fusion reactor, which is planned to be the location of neutron flux characterization measurements in the near future. (authors)

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

WarpX: Delivering Unprecedented Particle-in-Cell Simulation Capability

Since 1939, more than 30 percent of all Nobel prizes in physics and four of the past 14 prizes in chemistry have been awarded for work with particle accelerators. These tools are now used to treat cancer and produce medical supplies, support research in applied fields such as pharmaceuticals, create microcircuits, and sterilize food—and the applications list continues to grow. However, the size of the facilities needed to house these machines—which are often dozens of kilometers long—has limited their future potential. Thus, researchers are motivated to create novel particle accelerator designs that provide new imaging capability but have a much smaller footprint. The Exascale Computing Project’s WarpX application captures the full complexity of the acceleration processes within plasma-based design, supporting the rapid and cost-efficient development of tens of thousands of new particle accelerators for various applications from improving human health to nuclear fusion reactors.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Crystallization and Thermoelectric Transport in Semiconductor Micro- and Nanostructures Under Extreme Conditions

This project focused on thermoelectric transport in semiconductor micro and nanostructures where moderate and typical operating voltages and currents lead to extreme thermal gradients and current densities. Models that describe behavior of semiconducting materials typically assume an equilibrium condition or slight deviations from it. In these cases the generation-recombination processes are assumed to have reached a local equilibrium for a given temperature. Hence, free carrier concentrations and their mobilities, band-gap, thermal conductivity, thermoelectric properties, mobility of atoms and mechanical properties of the material, can be described as a function of temperature. In the case of PN junctions under electrical bias, carrier concentrations can change up to ~ 1020 cm-3 and a drift-diffusion approximation is typically used to obtain the carrier concentrations while assuming that the material properties do not change. In non-equilibrium conditions, the assumption that the material properties remain the same may not be valid. While the increased conduction-band electron concentration may not have a drastic effect on the material, large hole concentration is expected to soften the material as ‘a hole’ comes into existence as a broken bond in the lattice. As the hole density approaches 1022 cm-3, the number of bonds holding the lattice together is significantly reduced, making it easier to break additional bonds, reduce band-gap and inhibit phonon transport. As these holes move away from where they were generated, local properties are expected to deviate significantly from the equilibrium case. Hence, temperature alone is not sufficient to describe the behavior of the material. The behavior of the solid material close to a molten region (liquid-solid interfaces) is also expected to deviate from the equilibrium case as a function of hole injection rate, which can be drastically increased or decreased in the presence of an electric field. In the past years we have investigated the possible thermoelectric explanation of asymmetric melting of self-heated Si micro-structures using equilibrium materials’ properties that exist in the literature. We have analyzed the contribution of the electrons and the holes and identified the generation-transport-recombination of minority carriers (GTR) as the reason for an extreme change in the thermal profile in presence of strong generation and electric field. A more complete analysis required construction of models that capture the individual generation and recombination processes to understand the thermal profile as well as the possibility of electronic softening and non-equilibrium melting of the structure below melting temperature. The possibility of melting a material at a lower temperature breaks the correlation between the atomic mobility and the kinetic energy in the system for a given temperature and may allow alternative growth processes. This may also be the mechanism behind ‘amorphization-without-melting in layered structures heated with laser pulses’ that has been reported earlier. The conventional models for semiconductors are constructed for low temperature operation and their projections to higher temperatures do not yield reasonable carrier concentrations. Using these models, the free hole concentrations are calculated to be on the order of 1019 cm-3 at melting, which also do not correlate well with the latent heat of fusion. The melt is expected to correspond to broken bond concentrations on the order of the atomic density (~5x1022 cm-3 for Silicon). Hence, using conventional models the thermoelectric contribution expected from the GTR process is estimated to be much smaller than it likely is. Our work focused on improving the computational models and electrical characterization of materials and devices to better understand thermoelectric trabsport under extremen thermal gradients and current densities. Specifically, during this project, we have - Expanded our computational models to include self-consistent solution of Poisson charge equation (together with current and heat equations currently solved) for improved accuracy of role of bipolar conduction, - Developed a crystallization model incorporating experimentally determined nucleation rates and growth velocities to enable simulation of grain growth, growth-from-melt, filament formation and retention, - Performed high-temperature characterization of relevant materials (including metal contacts, interfacial and insulation layers); electrical and thermal conductivities, Seebeck coefficient, carrier mobility and concentration, - Performed High-speed device-level characterization of metastable amorphous and crystalline phases, crystallization and amorphization dynamics, melting and crystalline growth-from-melt, - Observed and characterized formation of microplasmas in electrically stressed ZnO nanoforests.

36 MATERIALS SCIENCE↗

TU-F-BRF-04: Registration of 3D Transesophageal Echocardiography and X-Ray Fluoroscopy Using An Inverse Geometry X-Ray System

Purpose: To develop a method for the fusion of 3D echocardiography and Scanning-Beam Digital X-ray (SBDX) fluoroscopy to assist with catheter device and soft tissue visualization during interventional procedures. Methods: SBDX is a technology for low-dose inverse geometry x-ray fluoroscopy that performs digital tomosynthesis at multiple planes in real time. In this study, transesophageal echocardiography (TEE) images were fused with SBDX images by estimating the 3D position and orientation (the “pose”) of the TEE probe within the x-ray coordinate system and then spatially transforming the TEE image data to match this pose. An initial pose estimate was obtained through tomosynthesis-based 3D localization of points along the probe perimeter. Position and angle estimates were then iteratively refined by comparing simulated projections of a 3D probe model against SBDX x-ray images. Algorithm performance was quantified by imaging a TEE probe in different known orientations and locations within the x-ray field (0-30 degree tilt angle, up to 50 mm translation). Fused 3D TEE/SBDX imaging was demonstrated by imaging a tissue-mimicking polyvinyl alcohol cylindrical cavity as a catheter was navigated along the cavity axis. Results: Detected changes in probe tilt angle agreed with the known changes to within 1.2 degrees. For a 50 mm translation along the source-detector axis, the detected translation was 50.3 mm. Errors for in-plane translations ranged from 0.1 to 0.9 mm. In a fused 3D TEE/SBDX display, the catheter device was well visualized and coincident with the device shadow in the TEE images. The TEE images portrayed phantom boundaries that were not evident under x-ray. Conclusion: Registration of soft tissue anatomy derived from TEE imaging and device imaging from SBDX x-ray fluoroscopy is feasible. The simultaneous 3D visualization of these two modalities may be useful in interventional procedures involving the navigation of devices to soft tissue anatomy.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

The causal relationship between melt pool geometry and energy absorption measured in real time during laser-based manufacturing

During laser powder bed fusion additive manufacturing, laser power absorption is governed by a pro -tean pool of molten metal that can present as a highly reflective surface, a deeply absorbing cavity, or some amalgamation thereof. These melt pool dynamics have been linked to defect creation, porosity, and surface finish quality. Although these are therefore critical for determining final part quality, their in-stantaneous influence on laser absorption have only been explored through simulation. To date, direct real-time observations have been elusive due to the locally extreme environment. In this work, we fo-cus a laser on Ti-6Al-4V powder and bare plate while quantifying the time-dependent, absolute energy absorption by monitoring omnidirectional backscattered laser intensity. We also simultaneously record the projective melt pool geometries with high-speed synchrotron x-ray imaging. We find that laser ab-sorption strongly reflects the stability of the vapor depression over a wide range of applied laser powers, oxygen content in the processing atmosphere, and with the presence of powder. During laser scanning of a powder bed surface, we find a significant absorption reduction after 400 mu s due to a dramatic change in the vapor depression aspect ratio-an event known to create porosity. Furthermore, as several industrial scan strate-gies necessitate thousands of these events during a build, their identification and control is of significant practical importance. Lastly, a normalized enthalpy model is demonstrated to be effective in quantifying the relationship between the laser absorption and cavity depth, even under transient conditions. In addi-tion to providing vital quantitative data for simulation calibration, the correlation of melt pool geometry with laser absorption during realistic processing conditions suggests the use of a total backscattered light detection system for real-time process control.

36 MATERIALS SCIENCE↗

Development of Small Multiaperture Negative Ion Beam Sources and Related Simulation Tools

In the design of extraction systems for negative ion sources several fundamental questions still deserve further investigation, as the distribution of particles near the extraction sheath, the optimal magnetic structure and the space charge compensation length after acceleration. Large (and undesired) deflection differences may develop between beamlets of a multiaperture source, so that equalization of the magnetic field effect is necessary. To guarantee an uniform strength of filter field at extraction and in the acceleration, several configuration of arrays of permanent magnets were studied and fast simulation tools were developed. As an example of optimized magnetic configuration and as a possible experimental tool, the design of NIO1 (Negative Ion Optimization try 1) is here discussed. This project consists of a 3x3 matrix of 8 mm extraction holes, aimed at a total H{sup -} current about 130 mA with an extraction voltage V{sub s} = -60 kV. A modular design is used, so several parts (the extraction grid, the acceleration grid, the filter assembly, the source multipoles) can be rotated by 90 degrees for versatility. Space charge compensation was included into a two dimensional self consistent code for negative beams, here used for NIO1 simulation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Ion Motion Induced Emittance Growth of Matched Electron Beams in Plasma Wakefields

Plasma-based acceleration is being considered as the basis for building a future linear collider. Nonlinear plasma wakefields have ideal properties for accelerating and focusing electron beams. Preservation of the emittance of nano-Coulomb beams with nanometer scale matched spot sizes in these wakefields remains a critical issue due to ion motion caused by their large space charge forces. We use fully resolved quasistatic particle-in-cell simulations of electron beams in hydrogen and lithium plasmas, including when the accelerated beam has different emittances in the two transverse planes. The projected emittance initially grows and rapidly saturates with a maximum emittance growth of less than 80% in hydrogen and 20% in lithium. The use of overfocused beams is found to dramatically reduce the emittance growth. In conclusion, the underlying physics that leads to the lower than expected emittance growth is elucidated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Software For Advanced Large-scale Analysis Of Magnetic Confinement For Numerical Design, Engineering & Research (salamander)

As magnetic confinement fusion energy gains traction internationally to enable abundant energy production, designing components for fusion systems is a pressing challenge. During the planned lifetime of a fusion device, components evolve in extreme environments and must withstand large, repeated thermal loads and bombardment by 14 MeV neutrons, plasma ions, and neutral particles (deuterium, tritium, and helium), corrosive conditions, etc. All these physical processes take place simultaneously, interact in intricate ways, and impose important constraints that can affect performance. Experimental data is rare and costly to obtain, making design particularly challenging. Predictive computational frameworks must be an integral part of an accelerated and cost-effective design process by modeling fusion system performance in simulated environments. To better understand component degradation and operational impacts on their performance, the Software for Advanced Large-scale Analysis of MAgnetic confinement for Numerical Design, Engineering & Research (SALAMANDER) is designed as an open-source, fully integrated, multiphysics, multiscale, NQA-1 compliant framework facilitating 3D, high-fidelity fusion system modeling. To that end, SALAMANDER is a MOOSE-based framework, and therefore leverages MOOSE upstream libraries such as PETSc and libMesh to deliver sophisticated finite element, finite volume, and nonlinear solver technology for fusion energy simulations. SALAMANDER couples MOOSE physics module capabilities—such as thermal hydraulics, heat conduction, Navier-Stokes, and thermomechanics—with tritium transport via TMAP8, neutronics via Cardinal, and nascent particle-in-cell capabilities. Direct simulation Monte Carlo methods will be used to address neutral transport near the walls. By coupling all these physics in an integrated application, SALAMANDER will enable high-fidelity modeling of irradiation levels and plasma exposure conditions of plasma facing components and their impact on heat and tritium distributions, as well as the resulting mechanical constraints experienced by the plasma facing components and performance of blanket systems. Furthermore, SALAMANDER will be particularly suited for engineering studies thanks to the stochastic tool module readily available in MOOSE, allowing for extended uncertainty quantification and risk analysis studies. It is also able to use computer-aided design (CAD) meshes to model complex geometries, which is indispensable for fusion systems. SALAMANDER therefore supports design, safety, engineering, and research projects for magnetic confinement fusion systems

Simon, Pierre-Clement [Idaho National Laboratory (↗

Gyrokinetic projection of the divertor heat-flux width from present tokamaks to ITER

Here, the XGC1 edge gyrokinetic code is used to study the width of the heat-flux to divertor plates in attached plasma condition. The flux-driven simulation is performed until an approximate power balance is achieved between the heat-flux across the steep pedestal pressure gradient and the heat-flux on the divertor plates.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

MHD Analysis of Dual-Coolant Lead-Lithium Blanket for Spherical Tokamak Advanced Reactor

The tritium breeding blanket is vital for future fusion power plants, with the Spherical Tokamak Advanced Reactor (STAR) project highlighting the dual-coolant lead-lithium (DCLL) design. The DCLL blanket performs shielding, energy exhaust, and tritium breeding using a lead-lithium alloy , with lithium as the breeder and lead as the neutron multiplier. It also serves as the primary coolant, with helium providing supplemental cooling. Reduced-activation ferritic/martensitic steel is used for the blanket structure. Magnetohydrodynamic (MHD) phenomena influence the liquid metal flow in a magnetic field, affecting heat transfer in the breeder affected by energetic neutrons. Understanding key flow parameters in such conditions is critical for efficient DCLL design. This study uses three-dimensional thermofluid MHD analysis with ANSYS CFX software, modified at Princeton Plasma Physics Laboratory, to simulate high Hartmann flows. The neutronics code MCNP, coupled with plasma equilibrium, provides heat source distribution. In conclusion, we examine electromagnetic interactions in adjacent fluid domains and analyze the magnetic field’s impact on flow distribution in the inboard and outboard blanket layout, using detailed mesh generation for accurate results.

DCLL↗

Investigation into the transport properties of planetary interiors through inelastic X-ray scattering experiments and quantum molecular dynamics (Final Technical Report)

This was a two-year research project for the period 08/15/2018 - 08/14/2020 conducted at the University of Nevada, Reno using Pronghorn, a newly built high-performance cluster located at the University. The short-term project goal was to provide computational support for the experimental campaigns at LCLS through data analysis of previous and upcoming scheduled experiments, along with performing state-of-the-art atomistic simulations of dense plasmas. The longer-term goal was to create a new computational high energy density physics group located at the University of Nevada, Reno. Guided by results from past and future high-resolution scattering experiments, we aimed to research and develop non-equilibrium and non-adiabatic atomistic simulations of dense plasmas that went beyond the Born-Oppenheimer approximation

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

AToM (Advanced Tokamak Modeling)

This final report for the AToM project documents the contributions from General Atomics over the period 1 September 2014 to 31 August 2017. This includes significant progress on the development of tokamak integrated modeling frameworks (OMFIT and IPS), and development of new workflows for computing plasma profile (temperature, density, etc) evolution. Significant effort was also carried out in the high-performance computing arena, by adding the COGENT edge-simulation code to the AToM portfolio, and performing optimization of the CGYRO plasma turbulence code. Issues of data management and user outreach are also documented.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Final technical report for DE-SC0006957 Center for Simulation of Plasma Microturbulence

This final report for the CSPM (Center for Simulation of Plasma Microturbulence) project documents contributions from University of California, San Diego researchers over the period of 9/1/2011 – 8/31/2018. The primary focus of these efforts was on performing validation studies using the GYRO code, addressing topics such as finite-beta effects on H-mode transport and turbulence physics mechanisms in electron transport dominated regimes. Key results and products of the work include a formalized system of turbulent transport validation metrics and the first multiscale gyrokinetic simulations of coupled ion and electron scale turbulence, for physically realistic and experimentally measured parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗