Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FINE STRUCTURE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Local rare-earth dopant structure in a complex-oxide/semiconductor heterojunction: Molecular beam epitaxy grown Yb-doped SrTiO3 on Si(001)

We have investigated the structural and electronic properties of Yb-doped SrTiO3/Si(001) grown by molecular beam epitaxy. Other rare-earth donor dopants that result in n-type conductivity typically substitute for Sr at the A-sites in the perovskite lattice. In contrast, Yb has been found to substitute predominantly for Ti at the perovskite B-sites based on data from atomically resolved scanning transmission electron microscopy and spectroscopy, as well as extended x-ray absorption fine structure. Yb exhibits two distinct charge states as determined by x-ray absorption spectroscopy and associated modeling, +2.7 and +2.1. These aliovalent substitutional dopants are compensated by donor electrons from oxygen vacancies that form during epitaxial film growth. An atom beam flux mismatch was present during film depositions because it was assumed that Yb would occupy A-sites, leading to a flux matching formula given by Yb + Sr = Ti. However, the formation of YbTi rather than YbSr results in Sr vacancies and extraneous (i.e. non-lattice) Ti atoms in the films, or on the film surfaces. The presence of these defects, together with oxygen vacancies, leads to deep-level electron traps that were detected by resonant photoemission and much higher sheet resistance than that associated with, for instance, La-doped films.

Chambers, Scott A. (ORCID:000000025415043X)↗
DOE OSTI2023

CLASSY. VI. The Density, Structure, and Size of Absorption-line Outflows in Starburst Galaxies

Galaxy formation and evolution are regulated by the feedback from galactic winds. Absorption lines provide the most widely available probe of winds. However, since most data only provide information integrated along the line of sight, they do not directly constrain the radial structure of the outflows. In this paper, we present a method to directly measure the gas electron density in outflows (n e ), which in turn yields estimates of outflow cloud properties (e.g., density, volume filling factor, and sizes/masses). We also estimate the distance (r n ) from the starburst at which the observed densities are found. We focus on 22 local star-forming galaxies primarily from the COS Legacy Archive Spectroscopic SurveY (CLASSY). In half of them, we detect absorption lines from fine-structure excited transitions of Si $\tiny{II}$ (i.e., Si $\tiny{II}$ * ). We determine n e from relative column densities of Si $\tiny{II}$ and Si $\tiny{II}$ * , given Si $\tiny{II}$ * originates from collisional excitation by free electrons. We find that the derived n e correlates well with the galaxy's star formation rate per unit area. From photoionization models or assuming the outflow is in pressure equilibrium with the wind fluid, we get r n ~ 1–2r * or ~5r * , respectively, where r * is the starburst radius. Based on comparisons to theoretical models of multiphase outflows, nearly all of the outflows have cloud sizes large enough for the clouds to survive their interaction with the hot wind fluid. Most of these measurements are the first ever for galactic winds detected in absorption lines and, thus, will provide important constraints for future models of galactic winds.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Structural Phase Transitions of NbO 2 : Bulk versus Surface

The metal to insulator transition of NbO 2 has been predicted to be a result of a structural phase transition (SPT) governed by Peierls physics. However, direct observation of the SPT using experimental techniques is still restricted by the extremely high transition temperature (810 °C) and the proclivity for NbO 2 to oxidize into Nb 2 O 5 above 400 °C when exposed to air. In this work, we address these issues and employ temperature-dependent X-ray spectroscopy to describe the SPT of NbO 2 from the bulk to surface. Temperature-dependent extended X-ray absorption fine structure spectroscopy (T-EXAFS) reveals a gradual weakening of the bulk Nb dimers over a large temperature range, which is indicative of a second-order Peierls mechanism. From these measurements, we determine the critical dimer distance to be 2.77 Å. Our T-EXAFS observations are supported by density functional theory of the phonon dispersion and the electronic density of states of NbO 2 , which conclude that the dimerization is responsible for the insulating phase. The dimerization does not extend to the topmost layers, where an oxygen rich surface reconstruction is preferred irrespective of temperature even in extremely reducing environments; changes in the low-energy electron diffraction patterns are attributed to oxygen concentration and are independent of the underlying bulk phase transitions of NbO 2 .

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineering the electronic and strained interface for high activity of PdM core @Pt monolayer electrocatalysts for oxygen reduction reaction

Alloyed nanoparticles with core-shell structures provide a favorable model to modulate interfacial interaction and surface structures at the atomic level, which is important for designing electrocatalysts with high activity and durability. Herein, core-shell structured Pd 3 M@Pt/C nanoparticles with binary PdM alloy cores (M = Fe, Ni, and Co) and a monolayer Pt shell were successfully synthesized with diverse interfaces. Among these, Pd 3 Fe@Pt/C exhibited the best oxygen reduction reaction catalytic performance, roughly 5.4 times more than that of the commercial Pt/C catalyst used as reference. The significantly enhanced activity is attributed to the combined effects of strain engineering, interfacial electron transfer, and improved Pt utilization. Density functional theory simulations and extended X-ray absorption fine structure analysis revealed that engineering the alloy core with moderate lattice mismatch and alloy composition (Pd 3 Fe) optimizes the surface oxygen adsorption energy, thereby rendering excellent electrocatalytic activity. Finally, future researches may use this study as a guide on the construction of highly effective core-shell electrocatalysts for various energy conversions and other applications.

25 ENERGY STORAGE↗
DOE OSTI2024

Intercalative Redox Tuning for Cu/Li x Mn 2 O 4 -Catalyzed Oxidative Alkyne Coupling

Modulation of heterogeneous catalyst structure is ubiquitous within efforts to improve catalytic activity and selectivity at the molecular level. Herein, manganese oxide (MnO 2 ) is employed as a continuously tunable catalyst support through increasing extent of lithium intercalation and reduced surface potential. Oxidative grafting of an organocopper complex onto various lithium manganese oxides (Li x Mn 2 O 4 , x = 0-2.1) produced divalent and monovalent copper species on the partially reduced (0 ≤ x ≤ 1.2) and fully reduced (x = 2.1) surfaces, respectively, as determined by X-ray absorption fine structure (XAFS) analysis. In this study, the resultant materials are catalytically active for the oxidative coupling of terminal alkynes, with steady-state reaction rate data of oxidative propyne dimerization (200 °C, 0.6-2.4 kPa propyne, 2.4-9.9 kPa O 2 ) indicating that complete support lithiation (Li 2.1 Mn 2 O 4 ) provides increased catalytic performance and renders reoxidation steps less kinetically demanding compared to the unreduced parent material. Enacting a dual site (Cu and MnO x ) kinetic model can account for dimerization rates measured over Cu/Li 2.1 Mn 2 O 4 under various reactant concentrations, copper loadings, and surface coverages, providing supporting evidence for the synergistic role of the metal and support in facilitating the coupling reaction. Overall, results presented here provide an extension for general strategies of systematically controlling catalytic structure and function through lithium reduction of bulk oxides and subsequent electronic modulation of the metals supported thereon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Trace Metal Content and Speciation, Water and Soil Chemistry, and Methane Production for a Wetland in Missouri (September 2015) and in Florida (January 2016)

Data is associated with a manuscript in preparation for submission to explore whether low trace metal availability inhibits methane production in freshwater wetland soils. Reported data are from two field sites, one in Missouri and the second in Florida (see location data). At each site, surface water compositions and properties and soil compositions are reported. Trace metal availability is assessed via sequential chemical extractions, Ni K-edge X-ray absorption near edge structure (XANES) spectroscopy, and X-ray microfluorescence imaging. Soil mineralogy is determined via powder X-ray diffraction. Multi-energy X-ray microfluorescence imaging as well as bulk and microscale S K-edge XANES spectra assess sulfur speciation in the soils. This package also reports data from trace metal amendment experiments, specifically methane (CH4) production versus time in soil incubations, the dissolved trace metal concentrations in these incubations, and the Ni K-edge XANES and extended X-ray absorption fine structure (EXAFS) spectra of soils to which increasing concentrations of Ni were added. A final version of this package will be published upon acceptance of the associated manuscript.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports

Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Resonant Tender X-ray Scattering for Disclosing the Backbone Conformation of Conjugated Polymers

The backbone conformation of conjugated polymers (CPs) is essential to their performance in electronic applications. Contrast-variation small-angle neutron scattering (CV-SANS) techniques were used to assess the CP’s backbone conformation, which relies on synthesis of deuterated polymers. Such a technique has been proven mature and effective. One drawback is that deuteration labeling might subtly alter polymer’s physical properties due to structural modifications. To address these challenges, we introduce a novel approach utilizing tender Xray scattering near the sulfur K-edge to distinctly evaluate the backbone versus whole chain conformation for a low-bandgap donor−acceptor CP, poly[(5,6-difluoro- 2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-dialkyl-2,2′;5′,2″;5″,2‴-quaterthiophen-5,5‴- diyl)] (PffBT4T). For PffBT4T dissolved in trimethylbenzene (TMB), the sulfur K-edge is identified at approximately 2477 eV using near-edge X-ray absorption fine structure spectroscopy (NEXAFS). Tender X-ray scattering conducted at presulfur K-edge and on-sulfur K-edge at elevated temperatures facilitated the distinction between the backbone and whole chain conformations. The results demonstrate that for highly flexible polymer, the backbone’s persistence length could be lower than that of the whole chains, suggesting a more flexible backbone. This rapid, label-free method enhances our ability to characterize CP’s backbone conformation efficiently, offering significant implications for the design and optimization of CPs for advanced electronics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

The transformation of U(VI) and V(V) in carnotite group minerals during dissimilatory respiration by a metal reducing bacterium

Recent results from laboratory and field studies support that dissimilatory metal reducing (DMR) bacteria influence the fate and transport of uranium in anaerobic subsurface environments. To date, most research efforts have focused on the reduction of soluble U(VI) by DMR bacteria to form insoluble uraninite (UO 2 ). Subsurface environments harbor, however, large reservoirs of U(VI) in solid or mineral form. Uranium that is structure-bound in minerals is expected to be more refractory to microbial reduction than soluble U, based on analogy with Fe respiration. The reducibility of U(VI) could impact the fate of U(IV) by controlling mineral precipitation reactions, which has implications for the long-term immobilization of U in subsurface environments. Here, we studied anoxic cultures of Shewanella putrefaciens CN32 incubated with natural carnotite-group minerals by X-ray diffraction, electron microscopy, scanning transmission X-ray microscopy (STXM). Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy measurements at U-N 4,5 , V-L 2,3 , and O-K edges on cultures incubated up to 10 months show that V(V) was reduced to V(IV), whereas U was not reduced. In contrast, V(V) and U(VI) in solution were both completely reduced to lower oxidation states by CN32, as precipitates within the exopolymer surrounding the bacteria. Assays for the toxicity of U and V to CN32 showed that biofilm formation was stimulated at 0.001 M U(VI), and growth was inhibited at concentrations of U(VI) greater than 0.001 M. Vanadium did not inhibit growth or stimulate biofilm formation at any concentration tested. Investigations of the bacteria-mineral and bacteria-metal interface at the nanometer and molecular scales provide new insights into the co-respiration of V and U that help explain their biogeochemical cycling and have implications for subsurface bioremediation of these elements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Measuring calcium content in plants using NEXAFS spectroscopy

Calcium is important for the growth and development of plants. It serves crucial functions in cell wall and cell membrane structure and serves as a secondary messenger in signaling pathways relevant to nutrient and immunity responses. Thus, measuring calcium levels in plants is important for studies of plant biology and for technology development in food, agriculture, energy, and forest industries. Often, calcium in plants has been measured through techniques such as atomic absorption spectrophotometry (AAS), inductively coupled plasma–mass spectrometry (ICP-MS), and electrophysiology. These techniques, however, require large sample sizes, chemical extraction of samples or have limited spatial resolution. Here, we used near-edge X-ray absorption fine structure (NEXAFS) spectroscopy at the calcium L- and K-edges to measure the calcium to carbon mass ratio with spatial resolution in plant samples without requiring chemical extraction or large sample sizes. We demonstrate that the integrated absorbance at the calcium L-edge and the edge jump in the fluorescence yield at the calcium K-edge can be used to quantify the calcium content as the calcium mass fraction, and validate this approach with onion epidermal peels and ICP-MS. We also used NEXAFS to estimate the calcium mass ratio in hypocotyls of a model plant, Arabidopsis thaliana , which has a cell wall composition that is similar to that of onion epidermal peels. These results show that NEXAFS spectroscopy performed at the calcium edge provides an approach to quantify calcium levels within plants, which is crucial for understanding plant physiology and advancing plant-based materials.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

Atypical Divergence of SARS-CoV-2 Orf8 from Orf7a within the Coronavirus Lineage Suggests Potential Stealthy Viral Strategies in Immune Evasion

Orf8, one of the most puzzling genes in the SARS lineage of coronaviruses, marks a unique and striking difference in genome organization between SARS-CoV-2 and SARS-CoV-1. Here, using sequence comparisons, we unequivocally reveal the distant sequence similarities between SARS-CoV-2 Orf8 with its SARS-CoV-1 counterparts and the X4-like genes of coronaviruses, including its highly divergent “paralog” gene Orf7a, whose product is a potential immune antagonist of known structure. Supervised sequence space walks unravel identity levels that drop below 10% and yet exhibit subtle conservation patterns in this novel superfamily, characterized by an immunoglobulin-like beta sandwich topology. We document the high accuracy of the sequence space walk process in detail and characterize the subgroups of the superfamily in sequence space by systematic annotation of gene and taxon groups. While SARS-CoV-1 Orf7a and Orf8 genes are most similar to bat virus sequences, their SARS-CoV-2 counterparts are closer to pangolin virus homologs, reflecting the fine structure of conservation patterns within the SARS-CoV-2 genomes. The divergence between Orf7a and Orf8 is exceptionally idiosyncratic, since Orf7a is more constrained, whereas Orf8 is subject to rampant change, a peculiar feature that may be related to hitherto-unknown viral infection strategies. Despite their common origin, the Orf7a and Orf8 protein families exhibit different modes of evolutionary trajectories within the coronavirus lineage, which might be partly attributable to their complex interactions with the mammalian host cell, reflected by a multitude of functional associations of Orf8 in SARS-CoV-2 compared to a very small number of interactions discovered for Orf7a.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2021

Revealing the Configuration and Conformation of Surface Organometallic Catalysts with DNP-Enhanced NMR

Although single-site, supported organometallic catalysts were designed with homogeneity in mind, little is strictly known about their atomic-level structure and uniformity. This is in large part due to the inability of conventional characterization tools to provide structural information with adequate resolution and range for this purpose. In this work, we show that dynamic nuclear polarization (DNP)-enhanced solid-state nuclear magnetic resonance (NMR) enables the measurement of distances between the surface and individual carbons, making it possible to orient complexes and molecules on surfaces. We use this approach to determine the orientation and configuration of naturally 13 C-abundant acetate and supported organoiridium(III) pincer complex, both supported on γ-Al 2 O 3 . By combining solid-state NMR and extended X-ray absorption fine structure spectroscopy (EXAFS) experiments with periodic density functional theory (DFT) calculations, we are able to determine the three-dimensional arrangement of ligands around the metal center and thereby identify the structure of the supported complex at a resolution reminiscent of that associated with single-crystal diffractometry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Microbial reduction of low-crystallinity tripuhyite (FeSbO 4 ): Implications for Sb(V) cycling in contaminated environments

Tripuhyite (FeSbO 4 ) is an important antimony (Sb)-bearing mineral that controls Sb mobility in contaminated environments, yet its structural stability during microbial reduction remains unresolved. Understanding how FeSbO 4 behaves under anoxic conditions is therefore necessary to predict natural Sb cycling. Here, this study examined how an anaerobic microbial community interacts with FeSbO 4 and alters its structural and redox behavior. Across all conditions, FeSbO 4 released measurable Sb(V), demonstrating that the mineral undergoes partial dissolution in anoxic environment even without microbial activity. However, when extensive microbial Fe(III) reduction occurred in the presence of the electron shuttle anthraquinone-2,6-disulfonate (AQDS), the released Sb was re-immobilized. This indicates that microbial reduction processes modulate Sb mobility. Microbial community analysis showed the enrichment of acetate-utilizing Fe(III)-reducing bacteria as key drivers of Fe reduction. Although secondary Fe minerals were not detected, X-ray absorption fine structure measurements and scanning electron microscopy images revealed the formation of an Sb(III)-bearing phase consistent with valentinite (Sb 2 O 3 ) in the AQDS-amended treatment. This transformation suggests that AQDS not only enhances Fe(III) reduction but is also linked to Sb(V) reduction, and facilitates the immobilization of reduced Sb(III) as Sb 2 O 3 . Overall, this work provides the first evidence that FeSbO 4 is susceptible to microbially mediated redox transformations, and that these processes can significantly alter the mobility and speciation of Sb in reducing environments.

Electron transfer mediator↗
DOE OSTI2024

Ni and Co Incorporation in Forsterite: A Density Functional Theory Study with Hubbard Correction

Ni and Co are critical elements for the world economy and modern technologies. Mafic and ultramafic deposits represent low-grade yet abundant alternatives to traditional Ni and Co ores. Here, in this work, density functional theory (DFT) with the Hubbard U correction (DFT+U) was used to simulate the incorporation of Ni and Co in forsterite (Mg 2 SiO 4 ), the Mg endmember of olivine, a common mineral in mafic and ultramafic rocks. Hubbard U terms for Ni and Co were parametrized using a series of oxide, hydroxide, carbonate, silicate, and sulfide minerals relevant to extraction and recovery of Ni and Co from mafic and ultramafic deposits. Electronic, energetic, magnetic, and structural properties were considered in the parametrization. For each of Ni and Co, an effective Hubbard correction (U eff ) value that optimized agreement with either experimental data or a hybrid exchange-correlation functional for all of the minerals considered is reported. DFT+U ab initio molecular dynamics (AIMD) simulations of Ni and Co incorporated into the M1 and M2 octahedral sites of forsterite were then performed. Ni and Co substitution in the M1 site was more energetically favorable than substitution in the M2 site, in agreement with published partition coefficients. AIMD trajectories were used to compute extended X-ray absorption fine structure (EXAFS) spectra of Ni in the M1 and M2 sites for direct fitting to a published experimental spectrum of Ni in a natural San Carlos olivine sample. The results of the fit indicated that ordering of Ni in the M1 site was not as strong at the low Ni concentrations relevant to mafic and ultramafic silicate minerals as that at the higher concentrations of the Ni-Mg olivine solid solutions studied to date.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Micrometer-sized Magnetite Synthesis using Fe(OH)2(s) as a Precursor for Technetium Sequestration from Liquid Nuclear Waste Streams

Systematic batch experiments under variable adjusted physicochemical conditions were conducted to explore optimization of micrometer-sized magnetite synthesis for Tc sequestration from radionuclide waste streams using Fe(OH)2(s) as the precursor. Extensive solid characterization using x-ray diffraction and spectroscopic methods was performed to assess changes in particle morphology and size distribution, as well as Tc speciation and incorporation, in the produced mineral phases. The results show that the solution pH, temperature, and oxidation kinetics play key roles in the final mineral products. Micrometer-sized magnetite crystals (0.62-0.96 µm on average) with well-defined dodecahedral or octahedral structures were synthesized under near neutral (~pH 8) or alkaline (~pH13) conditions at 75 °C, respectively; whereas goethite dominated the end products at room temperature. An increase in pH at 75 °C improved Tc removal from 27% (near neutral pH) to 42% (alkaline pH), but the removal process remained inhibited by redox competitive Cr(VI) present in the waste streams. By adding additional Fe(II) to the system, Tc sequestration was dramatically improved to up to 87% without observable changes in the solid product. The sequestrated Tc existed as TcO2·2H2O and/or Tc(IV) incorporated into magnetite, where extended X-ray absorption fine structure (EXAFS) spectroscopy showed that more Tc was incorporated into magnetite at elevated temperatures and pH conditions, with complete Tc(IV) incorporation into magnetite occurring under 75 °C-pH 13 conditions. Our results indicate that optimal micrometer-sized magnetite can be produced for Tc sequestration by reacting Fe(OH)2(s) with a waste stream simulant under elevated pH (~13) and temperature (75 °C) conditions. The incorporation of reduced Tc(IV) into stable micrometer-sized magnetite provides a viable supplemental immobilizing technology that may be used to improve nuclear waste treatment and disposal needs.

Wang, Guohui↗
DOE OSTI2022

Li x (C 5 H 5 N) y Fe 2– z Se 2 : A Defect-Resilient Expanded-Lattice High-Temperature Superconductor

Two-dimensional iron chalcogenide intercalates display a remarkable correlation of the interlayer spacing with enhancement of the superconducting critical temperature (T c ). In this work, synchrotron X-ray absorption (XAS; at the Fe and Se K-edges) and emission (XES; at the Fe Κβ) spectroscopies allow one to discuss how the important rise of T c (~44 K) in the molecule-intercalated Li x (C 5 H 5 N) y Fe 2-z Se 2 relates to the electronic and local structural changes felt by the inorganic host upon doping (x). XES shows that widely separated layers of edge-sharing FeSe 4 tetrahedra carry low-spin moieties, with a local Fe magnetic moment slightly reduced compared to the parent β-Fe 2-z Se 2 . Pre-edge XAS expresses the progressively reduced mixing of metal 3d-4p states upon lithiation. Doping-mediated local lattice modifications, probed by conventional T c optimization measures (cf. the anion height and FeSe 4 tetrahedra regularity), become less relevant when layers are spaced far away. On the basis of extended X-ray absorption fine structure, such distortions are compensated by a softer Fe network that relates to Fe-site vacancies, alleviating electron-lattice correlations and superconductivity. Density functional theory (DFT) guided modification of the isolated Fe 2-z Se 2 (z, vacant sites) planes, resembling the host layers, identify that Fe-site deficiency occurs at low energy cost, giving rise to stretched Fe sheets, in accordance with experiments. Here, the robust high-T c in Li x (C 5 H 5 N) y Fe 2-z Se 2 , arises from the interplay of electron-donating spacers and the iron selenide layer's tolerance to defect chemistry, a tool to favorably tune its Fermi surface properties.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Covalent Organic Framework (COF) Derived Ni–N–C Catalysts for Electrochemical CO 2 Reduction: Unraveling Fundamental Kinetic and Structural Parameters of the Active Sites

Electrochemical CO 2 reduction is a potential approach to convert CO 2 into valuable chemicals using electricity as feedstock. Abundant and affordable catalyst materials are needed to upscale this process in a sustainable manner. Nickel-nitrogen-doped carbon (Ni-N-C) is an efficient catalyst for CO 2 reduction to CO, and the single-site Ni-N x motif is believed to be the active site. However, critical metrics for its catalytic activity, such as active site density and intrinsic turnover frequency, so far lack systematic discussion. In this work, we prepared a set of covalent organic framework (COF)-derived Ni-N-C catalysts, for which the Ni-N x content could be adjusted by the pyrolysis temperature. The combination of high-angle annular dark-field scanning transmission electron microscopy and extended X-ray absorption fine structure evidenced the presence of Ni single-sites, and quantitative X-ray photoemission addressed the relation between active site density and turnover frequency.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Probing Sulfur Chemical and Electronic Structure with Experimental Observation and Quantitative Theoretical Prediction of Kα and Valence-to-Core Kβ X-ray Emission Spectroscopy

An extensive experimental and theoretical study of the Kα and Kβ high-resolution X-ray emission spectroscopy (XES) of sulfur-bearing systems is presented here. This study encompasses a wide range of organic and inorganic compounds, including numerous experimental spectra from both prior published work and new measurements. Employing a linear-response time-dependent density functional theory (LR-TDDFT) approach, strong quantitative agreement is found in the calculation of energy shifts of the core-to-core Kα as well as the full range of spectral features in the valence-to-core Kβ spectrum. The ability to accurately calculate the sulfur Kα energy shift supports the use of sulfur Kα XES as a bulk-sensitive tool for assessing sulfur speciation. The fine structure of the sulfur Kβ spectrum, in conjunction with the theoretical results, is shown to be sensitive to the local electronic structure including effects of symmetry, ligand type and number, and, in the case of organosulfur compounds, to the nature of the bonded organic moiety. This agreement between theory and experiment, augmented by the potential for high-access XES measurements with the latest generation of laboratory-based spectrometers, demonstrates the possibility of broad analytical use of XES for sulfur and nearby third-row elements. The effective solution of the forward problem, i.e., successful prediction of detailed spectra from known molecular structure, also suggests future use of supervised machine learning approaches to experimental inference, as has seen recent interest for interpretation of X-ray absorption near-edge structure (XANES).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗