Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ellipsoids”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Magnetic flux transfer associated with expansions and contractions of the dayside magnetosphere

The paper shows that the use of an empirical ellipsoidal model of the sunward magnetopause - which uses Ogo 5 magnetometer data, solar wind data from three satellites, and auroral zone magnetic indices - yields quantitative statistical estimates of the relative values of magnetopause displacements due to solar wind variation, flux transfers, and other causes. While the displacements due to flux transfers are smaller on the average, they are clearly comparable with those due solar wind fluctuations. The fact that expansion and contraction events are observed throughout the region accessible to Ogo 5 satellite on the sunward magnetopause suggests that the entire sunward magnetosphere is affected by flux erosion and return.

Holzer, R. E.↗
NASA NTRS1978

Extending the field of view of KD/asterisk/P electrooptic modulators

The use of KD(asterisk)P as a polarization rotator has been limited to small field of view instruments. To investigate this limitation, the index ellipsoid is used to describe the optical properties of KD(asterisk)P and to calculate the retardance and fast axis as a function of the angle of incidence and voltage. Computed converging light patterns are then compared with observed intensity patterns formed by KD(asterisk)P. Finally, computed intensity patterns are used to demonstrate how the field of view of KD(asterisk)P can be increased when properly aligned with a positive uniaxial crystal.

West, E. A.↗
NASA NTRS1980

Dual-frequency microwave antenna

Single antenna using two feed horns (one for receiving and radiation X-band signals, and one for S-band signals), in conjunction with ellipsoid reflector and dichronic plate, can accommodate two different frequencies simultaneously.

Bathker, D. A.↗
NASA NTRS1979

AXAF optical technology analysis

A grazing incidence telescope with six nested subsystems is investigated through the effects of misalignment and surface deformations on it's image quality. The axial rms-spot size serves as measure for the image quality. The surface deformations are simulated by ellipsoidal and sinusoidal deviation elements. Each type of defect is analyzed in the single two-element system. The full nested system is then analyzed in the presence of all possible defects on all twelve elements, whereby the magnitude of the defects is randomized within a given upper limit.

Korsch, D.↗
NASA NTRS1978

On the use of co-ordinate stretching in the numeral computation of high frequency scattering

The scattering of the sound of a jet engine by an airplane fuselage is modeled by solving the axially symmetric Helmholtz equation exterior to a long thin ellipsoid. The integral equation method based on the single layer potential formulation is used. A family of coordinate systems on the body is introduced and an algorithm is presented to determine the optimal coordinate system. Numerical results verify that the optimal choice enables the solution to be computed with a grid that is coarse relative to the wavelength.

Bayliss, A.↗
NASA NTRS1979

Feasibility of automated dropsize distributions from holographic data using digital image processing techniques

An automated technique for measuring particle diameters and their spatial coordinates from holographic reconstructions is being developed. Preliminary tests on actual cold-flow holograms of impinging jets indicate that a suitable discriminant algorithm consists of a Fourier-Gaussian noise filter and a contour thresholding technique. This process identifies circular as well as noncircular objects. The desired objects (in this case, circular or possibly ellipsoidal) are then selected automatically from the above set and stored with their parametric representations. From this data, dropsize distributions as a function of spatial coordinates can be generated and combustion effects due to hardware and/or physical variables studied.

Feinstein, S. P.↗
NASA NTRS1979

Marsshine on Phobos

The Viking Orbiters have obtained several images of Phobos at large phase angles in which the portion of the satellite not directly illuminated by the sun is faintly visible. A photometric analysis of one such image is presented to prove that the phenomenon is real and can be explained by Marsshine (i.e., the illumination of Phobos by sunlight reflected from Mars). Such images provide cross sections of Phobos and are useful in determining the true shape and size of the satellite. The cross section observed in Picture 111A03 agrees closely with that predicted by triaxial ellipsoid model of Phobos developed by Duxbury (1974).

Goguen, J.↗
NASA NTRS1979

The growth of aspherical structure in the universe - Is the Local Supercluster an unusual system

The growth and subsequent collapse of homogeneous ellipsoidal perturbations in a uniform expanding background is considered as a simple model for the formation of large-scale aspherical structures in the observed universe. Numerical calculations of the evolution of such perturbations turn out to be well described by an approximate analytic solution of the equations of motion, and simple relationships are found between the initial shape of a perturbation and its shape and kinematic properties at the time of collapse. Perturbations do not change their shape significantly until they reach a density contrast of order unity. As a result, structures with the kinematic properties of the Local Supercluster should form much more commonly in a low-density universe than in a flat universe. The homogeneity of the local Hubble flow, the motion of the Milky Way with respect to the microwave background, and the flattening of the Local Supercluster can be successfully accounted for by these models, provided that the initial perturbation is sufficiently flattened. Viable models are obtained only if the ratio of the lengths of the two smaller axes of the initial perturbation is at least 3:1 in an Einstein-de Sitter universe or at least 1.8:1 in a universe for which the density parameter (Omega) is of order 0.1, when the protocluster pancakes.

White, S. D. M.↗
NASA NTRS1980

Application of a numerically generated orthogonal coordinate system to the solution of inviscid axisymmetric supersonic flow over blunt bodies

A numerically generated orthogonal coordinate system (with the body surface and shock wave as opposite boundaries) was applied with a time asymptotic method to obtain steady flow solutions for axisymmetric inviscid flow over several blunt bodies including spheres, paraboloids, ellipsoids, hyperboloids, hemisphere cylinders, spherically blunted cones, and a body with a concavity in the stagnation region. Comparisons with experimental data and with the results of other computational methods are discussed. The numerically generated orthogonal coordinate system is described and applications of the method to complex body shapes, particularly those with concave regions, are discussed.

Hamilton, H. H., II↗
NASA NTRS1980

Spectral analysis of GEOS-3 altimeter data and frequency domain collocation

The mathematical background in spectral analysis as applied to geodetic applications is summarized. The resolution (cut-off frequency) of the GEOS 3 altimeter data is examined by determining the shortest wavelength (corresponding to the cut-off frequency) recoverable. The data from some 18 profiles are used. The total power (variance) in the sea surface topography with respect to the reference ellipsoid as well as with respect to the GEM-9 surface is computed. A fast inversion algorithm for matrices of simple and block Toeplitz matrices and its application to least squares collocation is explained. This algorithm yields a considerable gain in computer time and storage in comparison with conventional least squares collocation. Frequency domain least squares collocation techniques are also introduced and applied to estimating gravity anomalies from GEOS 3 altimeter data. These techniques substantially reduce the computer time and requirements in storage associated with the conventional least squares collocation. Numerical examples given demonstrate the efficiency and speed of these techniques.

Eren, K.↗
NASA NTRS1978

A computer program to calculate radiation properties of reflector antennas

A computer program to calculate the radiation properties of the reflector antennas is presented. It can be used for paraboloidal, spherical, or ellipsoidal reflector surfaces and is easily modified to handle any surface that can be expressed analytically. The program is general enough to allow any arbitrary location and pointing angle for the feed antenna. The effect of blockage due to the feed horn is also included in the computations. The computer program is based upon the technique of tracing the rays from the feed antenna to the reflector to an aperture plane. The far field radiation properties are then calculated by performing a double integration over the field points in the aperture plane. To facilitate the computation of double intergral, the field points are first aligned along the equispaced straight lines in the aperture plane. The computation time is relatively insensitive to the absolute size of the aperture and even though no limits on the largest reflector size have been determined, the program was used for reflector diameters of 1000 wavelenghts.

Agrawal, P. K.↗
NASA NTRS1980

Parametric study of modern airship productivity

A method for estimating the specific productivity of both hybrid and fully buoyant airships is developed. Various methods of estimating structural weight of deltoid hybrids are discussed and a derived weight estimating relationship is presented. Specific productivity is used as a figure of merit in a parametric study of fully buoyant ellipsoidal and deltoid hybrid semi-buoyant vehicles. The sensitivity of results as a function of assumptions is also determined. No airship configurations were found to have superior specific productivity to transport airplanes.

Ardema, M. D.↗
NASA NTRS1979

Influence of alignment and surface defects on the performance of X-ray telescopes

The effects of misalignment and surface deformations on the image quality of a grazing incidence telescope with six nested subsystems are investigated. The axial rms-spot size serves as a measure for the image quality. The surface deformations are simulated by ellipsoidal and sinusoidal deviations from the ideal surface. Misalignments are tilts, decenters, and despaces of the individual elements. The effects of each type of defect are analyzed in a single two-element system. The full nested system is then analyzed in the presence of all possible defects on all 12 elements, whereby the magnitude of the defects is randomized within a given upper limit.

Korsch, D.↗
NASA NTRS1979

Estimation of mean sea surfaces in the North Atlantic, the Pacific and the Indian Ocean using GEOS-3 altimeter data

The sea surface heights above the reference ellipsoid were determined for several regions of the world's ocean using data from the radar altimeter on board the GEOS-3 satellite in conjunction with precise orbital position information derived from laser data. The resolution of the estimated sea surfaces varied from 0.25 degrees off the east coast of the United States to about 2 degrees in the Indian Ocean near Australia. The rms crossover discrepancy after adjustment varied from 30 cm to 70 cm depending on geographic location. Comparison of the altimeter derived mean sea surface in the North Atlantic with the 5 x 5 ft GEM-8 detailed gravimetric geoid indicated a relative consistency of better than one meter.

Marsh, J. G.↗
NASA NTRS1980

Electromagnet configurations for extreme attitude testing in magnetic suspension and balance systems

The inclusion of adequate versatility into the electromagnet array configuration requires sizing the electromagnets to satisfy particular absolute force and moment requirements. Magnetic performance of a permanent magnet model core, air cored electromagnet may easily and reliably be computed by using the FORCE program which calculates model forces and moments via representations of the model as an assembly of dipoles and the electromagnets as an assembly of line currents. Some aspects of the performance of an ellipsoidal iron cored model may be inferred from the above under certain circumstances.

Britcher, C. P.↗
NASA NTRS1981

Separation behavior of boundary layers on three-dimensional wings

An inverse boundary layer procedure for calculating separated, turbulent boundary layers at infinitely long, crabbing wing was developed. The procedure was developed for calculating three dimensional, incompressible turbulent boundary layers was expanded to adiabatic, compressible flows. Example calculations with transsonic wings were made including viscose effects. In this case an approximated calculation method described for areas of separated, turbulent boundary layers, permitting calculation of this displacement thickness. The laminar boundary layer development was calculated with inclined ellipsoids.

Stock, H. W.↗
NASA NTRS1981

Principal normal curvature of surfaces

Certain principal normal curvatures of differential geometry were developed for use in curvature matrices associated with the asymptotic solution of electromagnetic diffraction problems. The effort is directed toward microwave antenna simulations and high speed digital computer analysis of radiometric instruments used to obtain soil moisture, sea state, salinity and temperature data. It is shown that the methods used to develop the principal normal curvatures for paraboloid, hyperboloid, ellipsoid, sphere, and cone can be applied to other radiometer geometries such as the parabolic torus, even though the surface parameterizations are different. It is concluded that deployable offset geometries, distorted by rotational forces and solar loads may be analyzed by similar means given a suitable surface description.

Schmidt, R. F.↗
NASA NTRS1980

Detection of tides on the Patagonian shelf by the SEASAT satellite radar altimeter - An initial comparison

The detection of tides on the Patagonian shelf off Argentina by the SEASAT satellite radar altimeter is reported. The satellite data was obtained during two passes of the satellite over the shelf on August 1 and August 4, 1978, and compared with empirical estimates of the tidal elevation along the satellite ground tracks based on coastal tide gage data, an estimate of tidal variation over the shelf, and the tidal prediction equations of Shureman (1958). Good agreement was observed between the satellite data of sea surface height with respect to a standard ellipsoid and the empirical estimate for the near-shore pass, with agreement degraded slightly for the pass further off shore. It is concluded that the generally good agreement found demonstrates the applicability of satellite radar altimeter data to the determination of tides and that small length scale fluctuations in the geoid are minor along the two ground tracks.

Parke, M. E.↗