Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron cooling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS1973

Theoretical models for electron energy relaxation in the lower ionosphere

Elastic collisions and rotation inelastic collisions involving quadrupole molecular transitions are important in energy relaxation of electrons in molecular gases. It has been customary in studying the cooling of electrons in a plasma heated by high-frequency waves to characterize this relaxation by the ionospheric G factor. The G factor is first defined in a fundamental way by use of kinetic theory. Then present models for theoretical cross sections for electron collision with O2 and N2 are used to derive expressions for the G factor in the lower ionosphere. Two models are considered: one uses Gerjuoy-Stein models for both N2 and O2; the other uses a Gerjuoy-Stein model for N2 and a Geltman-Takayanaki model for O2. Neither O2 model has been definitely established experimentally. It is found that temperature dependence of G is critically dependent on the O2 model.

Hagenbuch, K. M.↗
NASA NTRS2000

600 C Logic Gates Using Silicon Carbide JFET's

Complex electronics and sensors are increasingly being relied on to enhance the capabilities and efficiency of modernjet aircraft. Some of these electronics and sensors monitor and control vital engine components and aerosurfaces that operate at high temperatures above 300 C. However, since today's silicon-based electronics technology cannot function at such high temperatures, these electronics must reside in environmentally controlled areas. This necessitates either the use of long wire runs between sheltered electronics and hot-area sensors and controls, or the fuel cooling of electronics and sensors located in high-temperature areas. Both of these low-temperature-electronics approaches suffer from serious drawbacks in terms of increased weight, decreased fuel efficiency, and reduction of aircraft reliability. A family of high-temperature electronics and sensors that could function in hot areas would enable substantial aircraft performance gains. Especially since, in the future, some turbine-engine electronics may need to function at temperatures as high as 600 C. This paper reports the fabrication and demonstration of the first semiconductor digital logic gates ever to function at 600 C. Key obstacles blocking the realization of useful 600 C turbine engine integrated sensor and control electronics are outlined.

Neudeck, Philip G.↗
NASA NTRSDate not supplied

High-Temperature MEMS Based Venus Seismometer

Seismology is the method of choice for studying a planet’s interior and assessing current tectonic activity. With a single strategically placed seismometer, or preferably a network of seismometers, a variety of key aspects of a planet can be evaluated. The level and nature of seismicity observed provides a gauge of current geologic, especially tectonic, activity. Where tectonic activity is and is not occurring illuminates what regions and geologic features on the planet are currently active, thus, constraining global geodynamics. Larger distal earthquakes can be used to determine major compositional and structural boundaries within a planet’s interior, providing major constraints on planet formation and interior evolution. Seismometers have been deployed successfully on the Moon and Mars. Only small subsets of the scientific knowledge that can be gained from seismology can be obtained from alternative scientific approaches, such as global gravity solutions or repeat-pass interferometry. By virtue of its similar size to Earth, Venus is likely to be highly seismically active (Fig. 1). Even at Earth-like levels of seismology, returning meaningful data would require observation over a period that is at least 2–3 orders of magnitude longer than the 1–2 h lifetime of previous Soviet landers. Clever insulation could extend the lifetime of standard electronics in a modern lander to perhaps 24 h. While active cooling of electronics for a Venusian lander is plausible, this approach would require considerable technological advancement and will likely come at a high monetary and mass cost. The high density of the Venusian atmosphere at the surface should mean that there is good coupling of seismic energy into the atmosphere, such that seismology using infrasound from a balloon platform is currently being explored, and observations of the upper levels of the atmosphere from orbit has also been proposed [3]. Besides losing all shear wave information with these two methods, calibrating and interpreting seismic information that has been distorted by, and convolved with, atmospheric phenomena will be challenging without existing seismology data collected through surface seismometers (optimally, simultaneous surface seismological observations would be made).

silicon carbide↗
NASA NTRS1993

Cryogenic, low-noise high electron mobility transistor amplifiers for the Deep Space Network

The rapid advances recently achieved by cryogenically cooled high electron mobility transistor (HEMT) low-noise amplifiers (LNA's) in the 1- to 10-GHz range are making them extremely competitive with maser amplifiers. In order to address future spacecraft navigation, telemetry, radar, and radio science needs, the Deep Space Network is investing both maser and HEMT amplifiers for its Ka-band (32-GHz) downlink capability. This article describes the current state cryogenic HEMT LNA development at Ka-band for the DSN. Noise performance results at S-band (2.3 GHz) and X-band (8.5 GHz) for HEMT's and masers are included for completeness.

Bautista, J. J.↗
NASA NTRS1994

A Superconducting Hot Electron Bolometer Mixer for 530 GHz

This paper describes a superconducting hot electron bolometer mixer that uses diffusion rather than interactions with phonons as a cooling mechanism for the hot electrons. The bolometer is a 0.14 µm; wide niobium microbridge with a length less than 0.5 µm;. The submicron length ensures rapid diffusion of the hot electrons into contacting gold films. This mechanism is believed to be fast enough to allow mixer operation with intermediate frequencies of several GHz. An electron cooling time of 55 ps is inferred from DC resistance versus temperature measurements, indicating a roll-off frequency close to 3 GHz. Initial receiver measurements using a two-tuner waveguide mixer confirm heterodyne mixing at 532 GHz with an intermediate frequency of 1.4 GHz.

bolometer↗
NASA NTRS1990

Electron heating in quasi-perpendicular shocks - A Monte Carlo simulation

To study the problem of electron heating in quasi-perpendicular shocks, under the combined effects of 'reversible' motion, in the shock electric potential and magnetic field, and wave-particle interactions a diffusion equation was derived, in the drift (adiabatic) approximation and it was solved by using a Monte Carlo method. The results show that most of the observations can be explained within this framework. The simulation has also definitively shown that the electron parallel temperature is determined by the dc electromagnetic field and not by any wave particle induced heating. Wave-particle interactions are effective in smoothing out the large gradients in phase space produced by the 'reversible' motion of the electrons, thus producing a 'cooling' of the electrons. Some constraints on the wave-particle interaction process may be obtained from a detailed comparison between the simulation and observations. In particular, it appears that the adiabatic approximation must be violated in order to explain the observed evolution of the perpendicular temperature.

Veltri, Pierluigi↗
NASA NTRS1992

Reversible electron heating vs. wave-particle interactions in quasi-perpendicular shocks

The energy necessary to explain the electron heating in quasi-perpendicular collisionless shocks can be derived either from the electron acceleration in the d.c. cross shock electric potential, or by the interactions between the electrons and the waves existing in the shock. A Monte Carlo simulation has been performed to study the electron distribution function evolution through the shock structure, with and without particle diffusion on waves. This simulation has allowed us to clarify the relative importance of the two possible energy sources; in particular it has been shown that the electron parallel temperature is determined by the d.c. electromagnetic field and not by any wave-particle-induced heating. Wave particle interactions are effective in smoothing out the large gradients in phase space produced by the 'reversible' motion of the electrons, thus producing a 'cooling' of the electrons.

Veltri, P.↗
DOE OSTI2024

A variational method for the sheath potential of hypersonic leading edges with space-charge limitations

Electron transpiration cooling for the leading edges (LE) of hypersonic aircraft utilizes thermionic emission; however, space-charge effects limit the electron emission rate, potentially diminishing the efficiency of this cooling mechanism. We develop a variational weak form of the Poisson equation that describes the sheath potential and then numerically solve it using the finite element method. This formulation has two main benefits: (1) the space-charge limit condition can be incorporated as a constraint and (2) it allows for the analysis of three-dimensional geometries with complex boundary conditions. We demonstrate that the current emitted from the surface of an LE is generally a small fraction of the Child–Langmuir limit due to space charge. We then propose several methods to enhance the emitted current from the surface and to boost the cooling effect of thermionic emission. These include increasing the plasma density, applying a negative surface potential, and using fringe fields under suitable geometric conditions. For a LaB6 emitting LE, the total emitted current is shown to be minimal and independent of the temperature of a surface with floating potential. However, when a negative potential is applied and the surface is heated, the emitted current follows the Richardson–Dushman relationship up to a critical temperature, beyond which it remains constant. At an applied surface potential of −5 V, the critical temperature is around 1700 K.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2023

Theory of photoemission from cathodes with disordered surfaces

Linear-accelerator-based applications like x-ray free electron lasers, ultrafast electron diffraction, electron beam cooling, and energy recovery linacs use photoemission-based cathodes in photoinjectors for electron sources. Most of these photocathodes are typically grown as polycrystalline materials with disordered surfaces. In order to understand the mechanism of photoemission from such cathodes and completely exploit their photoemissive properties, it is important to develop a photoemission formalism that properly describes the subtleties of these cathodes. Here, the Dowell–Schmerge (D–S) model often used to describe the properties of such cathodes gives the correct trends for photoemission properties like the quantum efficiency (QE) and the mean transverse energy (MTE) for metals; however, it is based on several unphysical assumptions. In the present work, we use Spicer’s three-step photoemission formalism to develop a photoemission model that results in the same trends for QE and MTE as the D–S model without the need for any unphysical assumptions and is applicable to defective thin-film semiconductor cathodes along with metal cathodes. As an example, we apply our model to Cs 3 Sb thin films and show that their near-threshold QE and MTE performance is largely explained by the exponentially decaying defect density of states near the valence band maximum.

43 PARTICLE ACCELERATORS↗
NASA NTRS1973

Ogo 6 measurements of supercooled plasma in the equatorial exosphere.

Plasma measurements performed on Ogo 6 reveal electron and ion temperature values that on occasion appear to be well below the expected neutral gas temperature. The phenomenon is observed only at night above 500 km near the magnetic equator. It is suggested that the expansion cooling of the plasma is accomplished by downward motions of the F region plasma induced by winds or diffusion, by outward E x B drift, or more probably by the upward flow of plasma during interhemisphere transport along magnetic field lines. It is also suggested that preferential cooling of electrons because of their greater thermal conductivity should tend to give ion temperatures greater than electron temperatures during the postsunset cooling of the plasmasphere when photoelectrons are absent.

Hanson, W. B.↗
NASA NTRS1983

Coulomb thermal properties and stability of the Io plasma torus

Coulomb collisional energy exchange rates are computed for a model of the Io plasma torus consisting of newly created pickup ions, a background of thermally degraded intermediary ions, and a population of cooler electrons. The electrons are collisionally heated by both the pickup ions and background ions and are cooled by electron impact excitation of plasma ions which radiate in the EUV. It is found that a relative concentration of S III pickup ions forbidden S III/electrons = 0.1 with a temperature of 340 eV can deliver energy to the electrons at a rate of 3 x 10 to the -13th erg/cu cm per sec, sufficient to power the EUV emissions in the Io torus. The model predicts a background ion temperature Ti of about 53 eV and an electron temperature Te of about 5.5 eV on the basis of steady-state energy balance relations at Coulomb rates. The model also predicts electron temperature fluctuations at the 30 percent level on a time scale of less than 11 hours, consistent with recent observations of this phenomenon.

Barbosa, D. D.↗
NASA NTRS1976

Heat budget of ionospheric electrons

Heat input calculations were detached from solar extreme UV data and monatomic oxygen densities were derived from simultaneously measured data sets (ion composition 146-191 km) in a study of the heat budget of ionosphere electrons. Earlier inferences that cooling predominates over heating are supported. A search for additional heat sources or a revision of the cooling rates is recommended, by way of balancing the heat budget. Importance is attached to electron cooling by fine structure excitation of monatomic oxygen.

Prasad, S. S.↗
NASA NTRS2018

Challenges and Opportunities in Gen3 Embedded Cooling with High-Quality Microgap Flow

Gen3, Embedded Cooling, promises to revolutionize thermal management of advanced microelectronic systems by eliminating the sequential conductive and interfacial thermal resistances which dominate the present 'remote cooling' paradigm. Single-phase interchip microfluidic flow with high thermal conductivity chips and substrates has been used successfully to cool single transistors dissipating more than 40kW/sq cm, but efficient heat removal from transistor arrays, larger chips, and chip stacks operating at these prodigious heat fluxes would require the use of high vapor fraction (quality), two-phase cooling in intra- and inter-chip microgap channels. The motivation, as well as the challenges and opportunities associated with evaporative embedded cooling in realistic form factors, is the focus of this paper. The paper will begin with a brief review of the history of thermal packaging, reflecting the 70-year 'inward migration' of cooling technology from the computer-room, to the rack, and then to the single chip and multichip module with 'remote' or attached air- and liquid-cooled coldplates. Discussion of the limitations of this approach and recent results from single-phase embedded cooling will follow. This will set the stage for discussion of the development challenges associated with application of this Gen3 thermal management paradigm to commercial semiconductor hardware, including dealing with the effects of channel length, orientation, and manifold-driven centrifugal acceleration on the governing behavior.

microchannel↗
NASA NTRSDate not supplied

Electronic Speed Controller Thermal Management

This experiment was coupled with an acoustic test for NASA’s QUiet Electric ENgine (QUEEN). A cold plate with water was used to cool the electronic speed controller of the motor under different conditions (shown on right). Part 1: Fixed motor RPM, translating to fixed power/heat dissipation (4W per MOSFET) of electrical components, with variable cooling capacity measured by flow rate of cold plate water in gpm. Part 2: Fixed cooling power (1 gpm) with variable RPM.

thermal↗
DOE OSTI2020

Design of electron storage ring for high-energy EIC cooling

We present a possible layout for an the Electron-Ion Collider electron cooler based on a storage ring which employs a wiggler section for the cooling of the electrons through radiation damping. We describe the optics, first and second order chromaticity correction and calculate the dynamic aperture. Finally, we estimate the damping times of the ion in EIC.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Integrated Traction Drive Thermal Management: Keystone Project 3

Current poster provides update on research progress on Integrated Traction Drive Thermal Management project for Department of Energy's 2021 Annual Merit Review. NREL's support in thermal management system design for integrated traction drives of two Electric Drive Technologies Consortium teams (led by Oak Ridge National Lab and University of Wisconsin) is highlighted.

ADVANCED PROPULSION SYSTEMS↗
NASA NTRS1978

Electron temperatures in the F region of the ionosphere - Theory and observations

The theory and observations relating to electron temperatures in the F region of the ionosphere are reviewed. The review is divided into three basic parts. In the first part the theory concerning electron heating, cooling, and energy transport processes is reviewed, and all the relevant expressions are updated. In the second part the behavior of F region electron temperatures, as measured by satellites, rockets, and incoherent scatter radars, is discussed. This portion covers electron temperature variations with altitude, latitude, local time, season, geomagnetic activity, and solar cycle. The third part is primarily devoted to a discussion of the various attempts to compare measured and calculated F region electron temperatures.

Schunk, R. W.↗