Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EDX”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

A new way of phase identification, of AgGaGeS{sub 4}∙nGeS{sub 2} crystals

The phase identification of AgGaGeS{sub 4}·nGeS{sub 2} (n=0–4) crystals grown by vertical Bridgman–Stockbarger technique was carried out to find the boundary value n between a homogeneous solid solution and its mixture with GeS{sub 2}. To obtain reliable results, the conventional methods of X-ray diffraction (XRD) and energy dispersive X-ray spectroscopy (EDX) were completed by less common vapor pressure measurement in a closed volume and precise density measurements, which are very sensitive to the detection of small amounts of crystalline and glassy GeS{sub 2} and heterogeneous state of the crystals. The boundary value n=1.5 at 1045 K and the coexistence of the solid solution AgGaGeS{sub 4}·1.5GeS{sub 2} with the β-GeS{sub 2} phase for n>1.5 was found. Glassy GeS{sub 2} (∼2 mol%) was revealed by vapor pressure measurement and XRD studies in all the crystals. This is discussed in terms of the supersaturated solid solution decomposition upon temperature decreasing and the microphase separation of overcooled melt near the melting point under non-equilibrium crystallization. For the first time, the p–T dependence for glassy GeS{sub 2} was measured by the vapor pressure measurements. - Graphical abstract: lg p–1/T dependences of as-grown AgGaGeS{sub 4}·nGeS{sub 2} crystals. - Highlights: • Vapor pressure measurement as a powerful tool of phase identification. • Thermal characteristics of glassy GeS{sub 2}. • The homogeneity range of AgGaGeS{sub 4} from the GeS{sub 2} side.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Scaffolds of magnetically active 3d metals in the valence electron controlled borides Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr–Ni; x=0.5–1): Structutral, electronic and magnetic properties

Polycrystalline samples of the boride series Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr, Co, Mn, Ni) including single crystals of Ti{sub 8}Co{sub 3}Ru{sub 18}B{sub 8} have been prepared by arc-melting the elements. The phases were characterized by powder X-ray diffraction (Rietveld refinement), single-crystal X-ray diffraction (for M=Co), and energy-dispersive X-ray (EDX) analysis. They are substitutional variants of the Zn{sub 11}Rh{sub 18}B{sub 8} structure type, space group P4/mbm (No. 127) and contain a “scaffold” structural unit (M-ladders interacting with M/Ti-chains) as well as isolated M/Ti-chains. According to DFT calculations, the Ru–X (X=B, Ti, Ti/M) bonding interactions are nearly constant throughout the series and responsible for the structural stability of these phases, whereas the M–M and Ru–M interactions vary significantly with varying valence electron count. Furthermore, density of states (DOS) analyses predict the phases with M=Mn and Ni to develop a total magnetic moment but not the M=Co phase. Susceptibility measurements confirm the Co phase to be paramagnetic and the Mn Phase orders ferrimagnetically below 120 K and thus develops a magnetic moment, as predicted. - Graphical abstract: The crystal structures of the new phases (M=Cr, Mn, Co, Ni) are confirmed by Rietveld refinement of powder diffraction data and single crystal X-ray diffraction (for M=Co) to contain beside the M-ladder also M/Ti-chains. Similar to the series Ti{sub 9}M{sub 2}Ru{sub 18}B{sub 8}, the crystal structure of the new phases are mainly stabilized by the heteroatomic Ru–B and Ru–Ti bonds that remain nearly constant throughout the series, whereas the M-containing bonds vary significantly with varying valence electron count. An experimental finding confirmed and even extended by COHP bonding analyses. In addition, the DOS analyses of the M-elements reveal the development of magnetic moments for the M=Mn, Ni cases but not for M=Co. Indeed, Ti{sub 8}Co{sub 3}Ru{sub 18}B{sub 8} was found experimentally to be a paramagnet and ferrimagnetic ordering below 120 K is found for M=Mn. Highlights: • Synthesis of the valence electron controlled borides Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8} (M=Cr–Ni). • Prediction of magnetic properties of Ti{sub 9−x}M{sub 2+x}Ru{sub 18}B{sub 8}. • Ferrimagnetic ordering found in Ti{sub 8}M{sub 3}Ru{sub 18}B{sub 8}. • Chemical bonding studied by density functional theory.

36 MATERIALS SCIENCE↗

Low temperature grown ZnO@TiO{sub 2} core shell nanorod arrays for dye sensitized solar cell application

High aspect ratio ZnO nanorod arrays were synthesized on fluorine-doped tin oxide glasses via a low temperature solution method. By adjusting the growth condition and adding polyethylenimine, ZnO nanorod arrays with tunable length were successfully achieved. The ZnO@TiO{sub 2} core shells structures were realized by a fast growth method of immersion into a (NH{sub 4}){sub 2}·TiF{sub 6} solution. Transmission electron microscopy, X-ray Diffraction and energy dispersive X-ray measurements all confirmed the existence of a titania shell uniformly covering the ZnO nanorod's surface. Results of solar cell testing showed that addition of a TiO{sub 2} shell to the ZnO nanorod significantly increased short circuit current (from 4.2 to 5.2 mA/cm{sup 2}), open circuit voltage (from 0.6 V to 0.8 V) and fill factor (from 42.8% to 73.02%). The overall cell efficiency jumped from 1.1% for bare ZnO nanorod to 3.03% for a ZnO@TiO{sub 2} core shell structured solar cell with a 18–22 nm shell thickness, a nearly threefold increase. - Graphical abstract: The synthesis process of coating TiO{sub 2} shell onto ZnO nanorod core is shown schematically. A thin, uniform, and conformal shell had been grown on the surface of the ZnO core after immersing in the (NH{sub 4}){sub 2}·TiF{sub 6} solution for 5–15 min. - Highlights: • ZnO@TiO{sub 2} core shell nanorod has been grown on FTO substrate using low temperature solution method. • TEM, XRD, EDX results confirmed the existing of titana shell, uniformly covered rod's surface. • TiO{sub 2} shell suppressed recombination, demonstrated significant enhancement in cell's efficiency. • Core shell DSSC's efficiency achieved as high as 3.03%, 3 times higher than that of ZnO nanorods.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Novel ethylenediamine-gallium phosphate containing 6-fold coordinated gallium atoms with unusual four equatorial Ga–N bonds

A novel ethylenediamine-gallium phosphate, formulated as Ga(H{sub 2}NCH{sub 2}CH{sub 2}NH{sub 2}){sub 2}PO{sub 4}·2H{sub 2}O, was synthesized under hydrothermal conditions. The crystal structure, including hydrogen positions, was determined using single-crystal X-ray diffraction data (monoclinic, a=9.4886(3) Å, b=6.0374(2) Å, c=10.2874(3) Å, and β=104.226(3)°, space group Pc) and the bulk was characterized by chemical (Ga–P–C–H–N) and thermal analysis (TG–MS and DSC), including activation energy data of its thermo-oxidative degradation, powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (SS-NMR) measurements, and transmission electron microscopy (TEM, SAED/NBD, and STEM BF-EDX). The crystal structure is built up of infinite zig-zag chains running along the c-axis, formed by vertex-shared (PO{sub 4}) and (GaO{sub 2}N{sub 4}) polyhedra. The new compound is characterized by unusual four equatorial Ga–N bonds coming from two nonequivalent ethylenediamine molecules and exhibits strong blue emission at 430 nm (λ{sub ex}=350 nm) in the solid state at room temperature. - Graphical abstract: Single crystals of a new ethylenediamine-gallium phosphate, Ga(H{sub 2}NCH{sub 2}CH{sub 2}NH{sub 2}){sub 2}PO{sub 4}·2H{sub 2}O, were obtained and the structural features presented. This structure is one of the scarce examples of GaPO with Ga–N bonds reported. - Highlights: • A novel ethylenediamine-gallium phosphate was hydrothermally synthesized. • The new compound is characterized by unusual four equatorial Ga–N bonds. • Void-volume analysis shows cages and channels with sizes ideally suited to accommodate small molecules. • The new compound exhibits strong blue emission.

36 MATERIALS SCIENCE↗

Synthesis and crystal structure characterization of InGaZnO{sub 4} with a new defect structure

Single crystals of InGaZnO{sub 4} were synthesized in a sealed Pt-tube at elevated temperatures under normal pressure without flux. InGaZnO{sub 4} has a trigonal crystal system (R3{sup ¯}m; No. 166) deduced from convergent beam electron diffraction (CBED). Single crystal structure refinement from XRD data at −150 °C (a=3.275(1) Å; c=25.99(1) Å; Z=3) revealed an alternate stacking of InO{sub 6/3}{sup −} and (Ga,Zn)O{sub 4/4}{sup +} layers, iso-structural to YbFe{sub 2}O{sub 4}. The cell parameters at room temperature were refined from powder X-ray diffraction data (a=3.284(3) Å and c=26.037(3) Å). The transparent crystals have a gray-bluish color and exhibit an excess of Ga expressed by the cation ratio of In:Ga:Zn=30.2(9):39(1):31(1) determined by energy dispersive X-ray spectroscopy (EDXS). While the isovalent substitution of In{sup 3+} by Ga{sup 3+} is known, an additional aliovalent substitution of Zn{sup 2+} by Ga{sup 3+} is observed. This results in the formula (In{sub 0.9}Ga{sub 0.1})Ga{sub 1.06}Zn{sub 0.91}□{sub 0.03}O{sub 4} where 3% of the cations in 4+1 coordination are vacant due to aliovalent substitution. Further evidence of that defect structure is found in the lattice parameter a which is substantially smaller than in stoichiometric InGaZnO{sub 4}, as well as in the strong absorption in the near-IR from transitions correlated with the defect structure. The bluish color of the crystals is due to an enhanced absorption in the red of the visible spectrum. For the first time, we achieved to image InGaZnO{sub 4} at atomic resolution in the electron microscope proving a perfect periodic stacking of atomic layers. - Graphical abstract: Single crystals of InGaZnO{sub 4} have been synthesized at ambient pressure and analyzed with X-ray diffraction, electron microscopy, and optical absorption. Optical band gap and optical transmission have been determined. - Highlights: • Preparation of single crystals of InGaO{sub 3}(ZnO){sub 1} at ambient pressure for the first time. • Non-stoichiometric compound (In{sub 0.9}Ga{sub 0.1})Ga{sub 1.06}Zn{sub 0.91}□{sub 0.03}O{sub 4} with defect structure, excess of Ga, depletion of Zn. • Real structure of InGaO{sub 3}(ZnO){sub 1} imaged by high resolution TEM for the first time. • Optical band gap and transmission of InGaO{sub 3}(ZnO){sub 1} single crystal.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of mangenese(III) porphyrin supported on imidazole modified chloromethylated MIL-101(Cr): A heterogeneous and reusable catalyst for oxidation of hydrocarbons with sodium periodate

In the present work, chloromethylated MIL-101(Cr) modified with imidazole, Im-MIL-101, was applied as a support for immobilizing of tetraphenylporphyrinatomangenese(III) chloride. The imidazole-bound MIL-101, Im-MIL-101, not only used as support for immobilization of manganese porphyrin but also applied as a heterogeneous axial base. The Mn(TPP)Cl@Im-MIL-101 catalyst was characterized by UV–vis, FT-IR, X-ray diffraction (XRD), N{sub 2} adsorption, field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray (EDX), elemental analysis and inductively coupled plasma (ICP) methods. The catalytic activity of this new catalytic system was investigated in the alkene epoxidation and alkane hydroxylation using NaIO{sub 4} as an oxidant in CH{sub 3}CN/H{sub 2}O at room temperature. This heterogeneous catalyst is highly efficient, stable and reusable in the oxidation of hydrocarbons. - Highlights: • MIL-101 was modified by covalent post synthetic modification. • Mn(TPP)Cl was anchored to imidazole modified MIL-101 by covalent attachment. • A heterogeneous catalyst was prepared. • The catalyst was used for epoxidation of alkenes and hydroxylation of alkanes. • The catalyst was reusable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Hydrothermal synthesis and characterization of a two-dimensional piperazinium cobalt–zinc phosphate via a metastable one-dimensional phase

A two-dimensional piperazinium cobalt–zinc phosphate, formulated as (C{sub 4}N{sub 2}H{sub 12}){sub 1.5}(Co{sub 0.6}Zn{sub 0.4}){sub 2}(HPO{sub 4}){sub 2}(PO{sub 4})·H{sub 2}O (2D), was synthesized under hydrothermal conditions. The crystal structure was determined using single-crystal X-ray diffraction data (monoclinic P2{sub 1}/c, a=8.1165(3) Å, b=26.2301(10) Å, c=8.3595(4) Å, and β=110.930(5)°) and the hydrogen atom positions were optimized by DFT calculations. A single-crystal corresponding to one-dimensional metastable phase, (C{sub 4}N{sub 2}H{sub 12})Co{sub 0.3}Zn{sub 0.7}(HPO{sub 4}){sub 2}·H{sub 2}O (1D), was also isolated and the crystal structure was determined (monoclinic P2{sub 1}/c, a=8.9120(6) Å, b=14.0290(1) Å, c=12.2494(5) Å, and β=130.884(6)°). The bulk was characterized by chemical (C–H–N) analysis, powder X-ray diffraction (PXRD), powder X-ray thermodiffractometry (HT-XRD), transmission electron microscopy (STEM(DF)-EDX and EFTEM), and thermal analysis (TG/SDTA-MS), including activation energy data of its thermal decomposition. The magnetic susceptibility and magnetization measurements show no magnetic ordering down to 4 K. - Graphical abstract: Hydrothermal synthesis and structural characterization of a two-dimensional piperazinium cobalt–zinc phosphate, (C{sub 4}N{sub 2}H{sub 12}){sub 1.5}(Co{sub 0.6}Zn{sub 0.4}){sub 2}(HPO{sub 4}){sub 2}(PO{sub 4})·H{sub 2}O (2D), have been reported. The crystal structure of a one-dimensional piperazinium cobalt–zinc phosphate, (C{sub 4}N{sub 2}H{sub 12})Co{sub 0.3}Zn{sub 0.7}(HPO{sub 4}){sub 2}·H{sub 2}O (1D) a metastable phase during the hydrothermal synthesis, was also determined. The thermal behavior of 2D compound is strongly dependent on the selected heating rate and the magnetic susceptibility and magnetization measurements show no magnetic ordering down to 4 K. - Highlights: • A 2D piperazinium cobalt–zinc phosphate has been synthesized and characterized. • Crystal structure of 1D metastable phase was also determined. • Thermal behavior of 2D compound is strongly dependent on the selected heating rate. • Magnetic measurements show no magnetic ordering down to 4 K.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal–organic frameworks assembled from lanthanide and 2,5-pyridinedicaboxylate with cubane-like [Ln{sub 4}(OH){sub 4}] building units

Lanthanide–organic frameworks based on 2,5-pyridinedicaboxylate (25p) ligand, formulated as [Yb{sub 4}(OH){sub 4}(25p){sub 4}(H{sub 2}O){sub 3}]·H{sub 2}O (25pYb), [Y{sub 4}(OH){sub 4}(25p){sub 4}(H{sub 2}O){sub 3}]·H{sub 2}O (25pY-1) and [Y{sub 6}(OH){sub 8}(25p){sub 5}(H{sub 2}O){sub 2}] (25pY-2), have been obtained as single phases under hydrothermal conditions. 25pYb and 25pY-1 are isostructural, and crystallize in the triclinic space group, P-1, with a=8.6075(5) Å, b=14.8478(7) Å, c=15.9164(9) Å, α=86.277(4)°, β=80.196(5)°, γ=81.785(4)°, and a=8.7166(6) Å, b=14.966(1) Å, c=15.966(1) Å, α=86.260(6)°, β=80.036(6)°, γ=81.599(6)°, respectively. 25pY-2 crystallizes in the monoclinic space group, P2{sub 1}/c, with a=24.9117(17) Å, b=13.7340(8) Å, c=14.3385(10) Å, β=100.551(7)°. 25pYb and 25pY-2 have been structurally characterized by single-crystal X-ray diffraction. The 25pYb structure is based on tetranuclear cubane-like [Yb{sub 4}(OH){sub 4}]{sup 8+} clusters, which are interconnected to eight neighbouring clusters through teen surrounding 25p ligands leading to neutral 3D framework, while the structure of 25pY-2 is based on two independent cuban-like [Y{sub 4}(OH){sub 4}]{sup 8+} clusters, which are joined together through Y1 cation leading to the formation of hexanuclear [Y{sub 6}(OH){sub 8}]{sup 10+} clusters, which in turn are joined via Y2 cation resulting in infinite inorganic chain extending along c-axis, and each chain is interconnected to six adjacent chains through 25p ligands leading finally to 3D framework. The luminescence properties of Eu{sup 3+} and Tb{sup 3+} doped 25pY-1 and 25pY-2 compounds have also been investigated. All materials has been characterized by powder X-ray diffraction, thermal analyses (TG–SDTA–MS), FTIR spectroscopy, C–H–N elemental analysis, scanning electron microscopy (SEM-EDX), and powder X-ray thermodiffraction. - Graphical abstract: Nowadays, lanthanide–organic frameworks (LOFs) attract tremendous attention due to the unique characteristic of lanthanide cations, such as variable coordination numbers and geometries which often lead to novel complex structures, and also to their magnetic and photoluminescence properties. Herein, three LOFs formulated as [Ln{sub 4}(OH){sub 4}(25p){sub 4}(H{sub 2}O){sub 3}]·H{sub 2}O (Ln=Y, Yb) and [Y{sub 6}(OH){sub 8}(25p){sub 5}(H{sub 2}O){sub 2}] have been obtained by hydrothermal method and characterized, and the photoluminescence properties of the Eu and Tb doped compounds are discussed. - Highlights: • Three novel LnOFs has been synthesized and characterized. • Crystal structures are based on tetranuclear cuban-like [Ln{sub 4}(OH){sub 4}]{sup 8+} clusters. • 25pYb and 25pY-1 are based on isolated [Ln{sub 4}(OH){sub 4}]{sup 8+} clusters. • 25pY-2 is based on infinite inorganic chains built up from [Y{sub 4}(OH){sub 4}]{sup 8+} clusters. • Photoluminescence studies show strong red and green light emissions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quaternary heterostructured Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} composite: Synthesis and enhanced visible-light-driven photocatalytic activity

In this work, a novel quaternary heterostructured Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} composite was fabricated through a low-temperature solution-phase route. The XRD, SEM, EDX and XPS results indicated the as-prepared sample is a four-phase composite of Bi{sub 2}O{sub 2}CO{sub 3}, Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}, Bi{sub 2}MoO{sub 6}, and Ag. The photocatalytic activities of the as-synthesized samples were evaluated towards the degradation of phenol red aqueous solution. The results showed that the as-synthesized Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} photocatalysts displayed much higher photocatalytic activities in comparison with pure Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}, pure Bi{sub 2}MoO{sub 6}, and Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} composite. Among them, the 2.5% Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} sample performed the best. The enhanced photocatalytic activity of the composite photocatalyst was attributed predominantly to the efficient separation of photoinduced electrons and holes. In addition, Ag nanoparticles were photodeposited on the surface of the composite to increase visible-light absorption via the surface plasmon resonance, which is also beneficial to the enhancement of photocatalytic performance. The possible photocatalytic mechanism of the quaternary heterostructure was also discussed in detail. - Graphical abstract: Quaternary heterostructured Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} were fabricated. The as-synthesized Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} photocatalysts displayed much higher photocatalytic activities in comparison with pure Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}, pure Bi{sub 2}MoO{sub 6}, and Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} composite. - Highlights: • Quaternary heterostructured Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} composites were fabricated. • Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} samples were characterized by various characterization technologies. • Ag–Bi{sub 2}O{sub 2}CO{sub 3}/Bi{sub 3.64}Mo{sub 0.36}O{sub 6.55}/Bi{sub 2}MoO{sub 6} composites presented excellent photocatalytic performances.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

New ternary tantalum borides containing boron dumbbells: Experimental and theoretical studies of Ta{sub 2}OsB{sub 2} and TaRuB

The new ternary transition metal-rich borides Ta{sub 2}OsB{sub 2} and TaRuB have been successfully synthesized by arc-melting the elements in a water-cooled crucible under an argon atmosphere. The crystal structures of both compounds were solved by single-crystal X-ray diffraction and their metal compositions were confirmed by EDX analysis. It was found that Ta{sub 2}OsB{sub 2} and TaRuB crystallize in the tetragonal Nb{sub 2}OsB{sub 2} (space group P4/mnc, no. 128) and the orthorhombic NbRuB (space group Pmma, no. 51) structure types with lattice parameters a=5.878(2) Å, c=6.857(2) Å and a=10.806(2) Å, b=3.196(1) Å, c=6.312(2) Å, respectively. Furthermore, crystallographic, electronic and bonding characteristics have been studied by density functional theory (DFT). Electronic structure relaxation has confirmed the crystallographic parameters while COHP bonding analysis indicates that B{sub 2}-dummbells are the strongest bonds in both compounds. Moreover, the formation of osmium dumbbells in Ta{sub 2}OsB{sub 2} through a Peierls distortion along the c-axis, is found to be the origin of superstructure formation. Magnetic susceptibility measurements reveal that the two phases are Pauli paramagnets, thus confirming the theoretical DOS prediction of metallic character. Also hints of superconductivity are found in the two phases, however lack of single phase samples has prevented confirmation. Furthermore, the thermodynamic stability of the two modifications of AMB (A=Nb, Ta; M =Ru, Os) are studied using DFT, as new possible phases containing either B{sub 4}- or B{sub 2}-units are predicted, the former being the most thermodynamically stable modification. - Graphical abstract: The two new ternary tantalum borides, Ta{sub 2}OsB{sub 2} and TaRuB, have been discovered. Their crystal structures contain boron dumbbells, which are the strongest bonds. Peirls distortion is found responsible for Os{sub 2}-dumbbells formation in Ta{sub 2}OsB{sub 2}. Ta{sub 2}OsB{sub 2} and TaRuB are Pauli paramagnet and potential superconductors. - Highlights: • Two new ternary tantalum borides, Ta{sub 2}OsB{sub 2} and TaRuB, discovered. • Boron dumbbells are the strongest bonds in Ta{sub 2}OsB{sub 2} and TaRuB. • Peierls distortion responsible for Os{sub 2}-dumbbells formation in Ta{sub 2}OsB{sub 2.} • Ta{sub 2}OsB{sub 2} and TaRuB are Pauli paramagnet. • Ta{sub 2}OsB{sub 2} and TaRuB contain pseudogaps and are potential superconductors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of difference quantity La-doped TiO{sub 2} photoanodes on the performance of dye-sensitized solar cells: A strategy for choosing an appropriate doping quantity

Facilitated by TiO{sub 2} particles adsorbing lanthanide ions in hydrosol, La-doped TiO{sub 2} was produced by a hydrothermal method. The structure, optical and photoluminescence properties of down-converting photoelectrode with the La{sup 3+} were characterized by X-ray (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray detector (EDX) and N{sub 2} adsorption-desorption isotherms measurement. The photoelectric conversion efficiency of dye-sensitized solar cells (DSSCs) fabricated with 0.05 g-La/TiO{sub 2} reached 7.02%, which gave an efficiency improved by 10.36% compared with that of cells fabricated from pure TiO{sub 2}. The improvement in efficiency was ascribed to more dyes adsorbed on the surface of TiO{sub 2}. - Graphical abstract: (a) J–V curves of La-doped photoelectrodes with different La(NO{sub 3}){sub 3}·6H{sub 2}O amounts; (b) the curves of efficiency changing with the amount of La(NO{sub 3}){sub 3}·6H{sub 2}O. The photoelectric conversion efficiency of dye-sensitized solar cells (DSSCs) fabricated with 0.05 g-La/TiO{sub 2} reached 7.02%, which gave an efficiency improved by 10.36% compared with that of cells fabricated from pure TiO{sub 2}.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complete doping in solid-state by silica-supported perchloric acid as dopant solid acid: Synthesis and characterization of the novel chiral composite of poly [(±)-2-(sec-butyl) aniline]

Poly [(±)-2-(sec-butyl) aniline]/silica-supported perchloric acid composites were synthesized by combination of poly[(±)-2-sec-butylaniline] base (PSBA) and the silica-supported perchloric acid (SSPA) as dopant solid acid in solid-state. The X-ray photoelectron spectroscopy (XPS) and CHNS results confirm nigraniline oxidation state and complete doping for composites (about 75%) and non-complete for the PSBA·HCl salt (about 49%). The conductivity of samples was (≈0.07 S/cm) in agreement with the percent of doping obtained of the XPS analysis. Also, contact resistance was determined by circular-TLM measurement. The morphology of samples by the scanning electron microscopy (SEM) and their coating were investigated by XPS, SEM-map and energy-dispersive X-ray spectroscopy (EDX). The key benefits of this work are the preparation of conductive chiral composite with the delocalized polaron structure under green chemistry and solid-state condition, the improvement of the processability by inclusion of the 2-sec-butyl group and the use of dopant solid acid (SSPA) as dopant. - Highlights: • The solid-state synthesis of the novel chiral composites of poly[(±)-2-(sec-butyl)aniline] (PSBA) and silica-supported perchloric acid (SSPA). • It takes 120 h for complete deprotonation of PSBA.HCl salt. • Use of SSPA as dopant solid acid for the first time to attain the complete doping of PSBA. • The coating of silica surface with PSBA.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Soft-template-synthesis of hollow CuO/Co{sub 3}O{sub 4} composites for pseudo-capacitive electrode: A synergetic effect on electrochemical performance

Hollow CuO/Co{sub 3}O{sub 4} hybrids, which inherited from its coordination polymer precursor consisting of sheets layer and nanoparticles layer composites, were synthesized and characterized by SEM, EDX, XRD and XPS. To assess its electrochemical capacitive performances, cyclic voltammetry, galvanostatic charging-discharging measurements and A.C. impedance tests were performed successively. The CuO/Co{sub 3}O{sub 4} hybrids had higher capacitance and lower charge transfer resistance than bare Co{sub 3}O{sub 4} nanostructures, revealing that it provided a protection layer and produced a synergistic effect due to the existence of CuO layer. The distinct synergistic effect could be further confirmed by endurance cycling tests. The capacitance of the CuO/Co{sub 3}O{sub 4} hybrids was 111% retained after 500 cycles at a charging rate of 1.0 A g{sup −1} and remained an intense growth trend after 2000 cycles at scan rate of 200 mV s{sup −1}. - Graphical abstract: Hollow CuO/Co{sub 3}O{sub 4} hybrids are synthesized and display a peculiar synergetic effect on the resulting performances, which can further be evaluated and confirmed by series of electrochemical measurements. - Highlights: • Hollow CuO/Co{sub 3}O{sub 4} hybrids are synthesized from bimetallic-Schiff base polymer precursors. • The capacitance of the CuO/Co{sub 3}O{sub 4} hybrids keeps a growth tendency after 2000 cycles. • A synergetic effect is found for the hybrids in electrochemical energy storage process.

36 MATERIALS SCIENCE↗

Growth of different phases and morphological features of MnS thin films by chemical bath deposition: Effect of deposition parameters and annealing

Manganese sulfide thin films have been deposited on glass slides by chemical bath deposition (CBD) method. The effects of preparative parameters such as deposition time, bath temperature, concentration of precursors, multi-layer deposition, different source of manganese, different complexing agent and thermal annealing on structural and morphological film properties have been investigated. The prepared thin films have been characterized using the X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). It exhibit the metastable forms of MnS, the hexagonal γ-MnS wurtzite phase with preferential orientation in the (002) plane or the cubic β-MnS zinc blende with preferential orientation in the (200) plane. Microstructural studies revealed the formation of MnS crystals with different morphologies, such as hexagons, spheres, cubes or flowers like. - Graphical Abstract: We report the preparation of different phases of manganese sulfide thin films (γ, β and α-MnS) by chemical bath deposition method. The effects of deposition parameters such as deposition time and temperature, concentrations of precursors and multi-layer deposition on MnS thin films structure and morphology were investigated. The influence of thermal annealing under nitrogen atmosphere at different temperature on MnS properties was also studied. Different manganese precursors as well as different complexing agent were also used. - Highlights: • γ and β-MnS films were deposited on substrate using the chemical bath deposition. • The effect of deposition parameters on MnS film properties has been investigated. • Multi-layer deposition was also studied to increase film thickness. • The effect of annealing under N{sub 2} at different temperature was investigated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Design and characterization of hierarchical aluminosilicate composite materials for Cs entrapment: Adsorption efficiency tied to microstructure

The growing quantity of nuclear waste and the serious threats to the environment challenge researchers to innovate and target new waste form technologies. In the past decades, considerable efforts have been devoted to developing highly selective sorbents followed by safe disposal with the assurance of chemical stability and robust retention performance. Zeolite-containing geopolymers are regarded as a possible 2-in-1 material able to both capture and sequester elements such as Cs in bed fixed column application perspective. Here, these composites show promise for combining extraction properties of zeolite powder due to its crystalline structure (high capacity and selective adsorption), with the tunable microstructure and the shaping feasibility of the geopolymer binder. For the development of materials devoted to Cs immobilization, porous zeolite/geopolymer composites were prepared by dispersing NaY zeolite particles in a geopolymer binder. The influence of the structural properties of such composites on their ability to entrap a large amount of Cs by an ionic exchange process was notably studied. Composites' compositions, porosities, morphologies and crystallinity were analyzed by scanning electron microscopy coupled with energy dispersive x-ray spectroscopy (SEM-EDX), x-ray diffraction analysis (XRD) and nitrogen adsorption/desorption studies. Experimental Cs sorption in batch mode was used to follow the ionic exchange phenomenon in these materials. Along with 5 wt% amount of zeolite in geopolymer improves the Cs adsorption performance offering multiple new adsorption sites. Additionally, the geopolymer mesopores are beneficial facilitating the access of Cs and its role as a binder is advantageous to tailor granular hierarchical structure for safer industrial application.

36 MATERIALS SCIENCE↗

Analytical study of ancient pottery from the archaeological site of Aiani, northern Greece

The present study is a multi-analytical approach on the characterization of several potsherd samples, dated from prehistoric to hellenistic times, from Aiani, ancient Upper Macedonia, northern Greece. In particular, X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Environmental Scanning Electron Microscopy, coupled with Energy Dispersive X-ray system (ESEM-EDX) were used for the determination of the morphological, chemical and mineralogical characteristics of the potsherds. The preliminary results indicated a rather local provenance of the analyzed ancient pottery samples and a finer texture and thus better ceramic manufacture as getting to hellenistic era. The use of a silicious or calcerous raw material is probably related to the specific utilization of each ceramic vessel in ancient times. The presence of gehlenite or pyroxene minerals in the ceramic matrix indicated higher firing temperatures, while lower temperatures were deduced when finding phylosilicate minerals. The preliminary results of this study do not necessarily imply that all the pottery of this area, belonging to the same chronological type, have similar physicochemical characteristics.

36 MATERIALS SCIENCE↗

Effects of pulsed current and H{sub 2}O{sub 2} amount on the composition of electrodeposited calcium phosphate coatings

Calcium phosphate coatings on Ti6Al4V substrates were elaborated by pulsed electrodeposition with hydrogen peroxide (H{sub 2}O{sub 2}) into electrolyte. The surface morphology and the chemical composition of the coatings were characterized by scanning electron microscopy (SEM) associated to Energy Dispersive X-ray Spectroscopy (EDXS) for X-ray microanalysis. The obtained results were systematically confirmed at the nanometre scale analysis using scanning transmission electron microscopy (STEM). Moreover, X-ray diffraction (XRD) was performed in order to identify the coatings phases. The results showed that pulsed electrodeposition without H{sub 2}O{sub 2} into electrolyte followed by heat treatment favoured coatings made of two phases which are stoichiometric hydroxyapatite (HAP) and {beta}-tricalcium phosphate ({beta}-TCP). On the other hand the addition of an optimized H{sub 2}O{sub 2} amount into electrolyte led to adherent and uniform coatings mainly made of stoichiometric hydroxyapatite (HAP).

36 MATERIALS SCIENCE↗

Zirconium doped nano-dispersed oxides of Fe, Al and Zn for destruction of warfare agents

Zirconium doped nano dispersive oxides of Fe, Al and Zn were prepared by a homogeneous hydrolysis of the respective sulfate salts with urea in aqueous solutions. Synthesized metal oxide hydroxides were characterized using Brunauer-Emmett-Teller (BET) surface area and Barrett-Joiner-Halenda porosity (BJH), X-ray diffraction (XRD), infrared spectroscopy (IR), scanning electron microscopy (SEM) and energy-dispersive X-ray microanalysis (EDX). These oxides were taken for an experimental evaluation of their reactivity with sulfur mustard (HD or bis(2-chloroethyl)sulfide), soman (GD or (3,3'-Dimethylbutan-2-yl)-methylphosphonofluoridate) and VX agent (S-[2-(diisopropylamino)ethyl]-O-ethyl-methylphosphonothionate). The presence of Zr{sup 4+} dopant can increase both the surface area and the surface hydroxylation of the resulting doped oxides, decreases their crystallites' sizes thereby it may contribute in enabling the substrate adsorption at the oxide surface thus it can accelerate the rate of degradation of warfare agents. Addition of Zr{sup 4+} converts the product of the reaction of ferric sulphate with urea from ferrihydrite to goethite. We found out that doped oxo-hydroxides Zr-FeO(OH) - being prepared by a homogeneous hydrolysis of ferric and zirconium oxo-sulfates mixture in aqueous solutions - exhibit a comparatively higher degradation activity towards chemical warfare agents (CWAs). Degradation of soman or VX agent on Zr-doped FeO(OH) containing ca. 8.3 wt.% of zirconium proceeded to completion within 30 min.

36 MATERIALS SCIENCE↗