Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffusion rate”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Improved correlations of the fuel/cladding liquid penetration rate with the out-of-pile transient database

Here, utilizing data from the Out-of-Pile Transient Database (OPTD), we developed advanced correlations for the cladding liquid penetration rate in metallic fuels used in sodium-cooled fast reactors (SFRs). Based on the available OPTD data, our research highlights the key role of Pu concentration in influencing the liquid penetration behavior, showing different threshold fuel-cladding interaction temperatures, with burnup playing a substantial role, particularly in fuels with a 19% Pu concentration. The penetration rate exhibits a parabolic, diffusion-limited behavior, thereby facilitating predictions of maximum liquid penetration depth over time. These correlations are significantly more accurate, under a variety of conditions, compared to existing single-parameter models, and enhance our understanding of SFR metallic fuel behavior, promoting safer and more efficient reactor operations.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Electrochromic Properties of Perovskite NdNiO 3 Thin Films for Smart Windows

Semiconductors with electrically tunable band gaps are of great interest in controlling transparency to electromagnetic radiation. Thin films of perovskite nickelate NdNiO 3 (NNO), a class of correlated oxides, were deposited on single-crystal (LaAlO 3 (LAO)) and polycrystalline (fluorine-doped tin oxide-coated glass (FTO)) substrates by magnetron sputtering, chemical solution deposition (CSD), and atomic layer deposition (ALD). Their electrochromic behaviors were investigated using a three-electrode setup in basic (KOH solution, pH = 12) electrolyte. During bleaching/coloration process, the proton intercalation/deintercalation and simultaneous electron compensation in the NNO lattice under electrical bias led to crossover of the material between the pristine-conducting phase (Ni 3+ ) and the strongly correlated insulating phase (Ni 2+ ), which serves as the working principle for electrochromic (tunable opacity in the visible range) behavior. Cyclic voltammetry (CV) scans demonstrate that NNO films are electrochemically stable in basic solutions for all three film deposition methods explored here. CV scans at varying rates enabled the extraction of diffusion coefficient of protons in thin film NNO, which is similar to 10 –7 cm 2 s –1 among all films studied. Large light transmittance modulation by bleaching and coloration was observed on films grown on both LAO and FTO substrates, suggesting its potential as an electrochromic material candidate for smart windows and optical shutter applications. Here, porous NNO films obtained by chemical solution deposition tend to demonstrate stronger electrochromic activity than dense films grown by sputtering or ALD.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Evolution of micro-pores in Ni–Cr alloys via molten salt dealloying

Porous materials with high specific surface area, high porosity, and high electrical conductivity are promising materials for functional applications, including catalysis, sensing, and energy storage. Molten salt dealloying was recently demonstrated in microwires as an alternative method to fabricate porous structures. The method takes advantage of the selective dissolution process introduced by impurities often observed in molten salt corrosion. This work further investigates molten salt dealloying in bulk Ni–20Cr alloy in both KCl–MgCl 2 and KCl–NaCl salts at 700 °C, using scanning electron microscopy, energy dispersive spectroscopy, and X-ray diffraction (XRD), as well as synchrotron X-ray nano-tomography. Micro-sized pores with irregular shapes and sizes ranging from sub-micron to several microns and ligaments formed during the process, while the molten salt dealloying was found to progress several microns into the bulk materials within 1–16 h, a relatively short reaction time, enhancing the practicality of using the method for synthesis. The ligament size increased from ~ 0.7 μm to ~ 1.3 μm in KCl–MgCl 2 from 1 to 16 h due to coarsening, while remaining ~ 0.4 μm in KCl–NaCl during 16 h of exposure. The XRD analysis shows that the corrosion occurred primarily near the surface of the bulk sample, and Cr 2 O 3 was identified as a corrosion product when the reaction was conducted in an air environment (controlled amount sealed in capillaries); thus surface oxides are likely to slow the morphological coarsening rate by hindering the surface diffusion in the dealloyed structure. 3D-connected pores and grain boundary corrosion were visualized by synchrotron X-ray nano-tomography. This study provides insights into the morphological and chemical evolution of molten salt dealloying in bulk materials, with a connection to molten salt corrosion concerns in the design of next-generation nuclear and solar energy power plants.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Spin-on deposition of amorphous zeolitic imidazolate framework films for lithography applications

Amorphous zeolitic imidazolate framework (aZIF) films have been recently introduced as resists for electron beam and extreme ultraviolet lithography. aZIFs are also being considered for separation applications, including thin film membranes. However, the reported methods for aZIF deposition are currently based on highly empirical trial-and-error approaches that hinder control of film composition, thickness and uniformity as well as scale-up and transferability to different coating geometries. This work presents a method for depositing aZIF films with controllable thickness using dilute precursors mixed immediately before encountering the substrate. Importantly, the method is amenable to quantitative analysis by computational fluid dynamics to extract intrinsic deposition rates and limiting reactant transport diffusivities, enabling predictive physics-based modeling of the deposition process. This allows the deposition method to be adapted for spin coating on silicon wafers to prepare high-quality aZIF films with consistently controlled thickness. Using this approach, high-resolution resist performance and wafer-scale use for beyond extreme-ultraviolet lithography of aZIF films is demonstrated.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Chromium Poisoning Mitigation Strategy in Strontium-Doped Lanthanum Manganite-Based Air Electrodes in Solid Oxide Fuel Cells

Abstract Chromium poisoning of the air electrode remains an obstacle to the long-term performance of solid oxide fuel cells (SOFCs). In Sr-doped LaMnO3 (LSM) air electrodes, the poisoning process results in two types of deposits, chromium oxide (Cr2O3), and Mn, Cr spinel (MnCr2O4). The former forms electrochemically and the latter forms via a chemical reaction. By applying a small anodic reverse bias, Cr2O3 deposits can be removed because their formation is electrochemical in nature. However, MnCr2O4 deposits remain because their formation is chemical, rather than electrochemical, in nature. In situ chemical decomposition of the Mn, Cr spinel was investigated as an alternate removal method as thermodynamics supports its decomposition into constituent oxides below ∼540 °C in pure oxygen. The spinel decomposition process was characterized using thermogravimetric and X-ray diffraction analyses. The experimentally determined rate of spinel decomposition was undetectable (very slow) with isolated MnCr2O4 powders. The addition of 10 mol% gadolinia doped ceria (GDC) and silver powders significantly increased the rate of decomposition. However, the rate is limited by the diffusion of oxygen through the decomposed oxide layer. Although one strategy may be the addition of GDC and silver to the LSM air electrode to enhance spinel decomposition, the more effective mitigation strategy would be to prevent the formation of MnCr2O4 spinel in the first place through the removal of the reactants: Cr2O3 via electrochemical cleaning and mobile Mn ions in the zirconia electrolyte by incorporating a diffusion barrier layer such as GDC between the air electrode and electrolyte.

Electrochemistry↗
DOE OSTI2022

Learning Optimal Multigrid Smoothers via Neural Networks

Multigrid methods are one of the most efficient techniques for solving large sparse linear systems arising from partial differential equations (PDEs) and graph Laplacians from machine learning applications. One of the key components of multigrid is smoothing, which aims at reducing high-frequency errors on each grid level. However, finding optimal smoothing algorithms is problem-dependent and can impose challenges for many problems. In this paper, we propose an efficient adaptive framework for learning optimized smoothers from operator stencils in the form of convolutional neural networks (CNNs). Here, the CNNs are trained on small-scale problems from a given type of PDEs based on a supervised loss function derived from multigrid convergence theories and can be applied to large-scale problems of the same class of PDEs. Numerical results on anisotropic rotated Laplacian problems and variable coefficient diffusion problems demonstrate improved convergence rates and solution time compared with classical hand-crafted relaxation methods.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

On Rate-Limiting Mechanisms in NMC Cathodes: The Interplay of Low and High Current Constraints

In this study, we investigate the rate performance limits in LiNi 0.6 Mn 0.2 Co 0.2 O 2 cathodes for lithium-ion batteries, focusing on how cathode thickness, porosity, and threshold voltage impact discharge capacity. By conducting galvanostatic discharge experiments across a wide range of current densities using cathodes of varying thicknesses and porosities, we identify two distinct rate-limiting mechanisms: ionic liquid-diffusion and Ohmic/charge-transfer limitations. Our findings show that thick, dense cathodes are primarily limited by lithium diffusion in the electrolyte, while thinner and more porous cathodes are dominated by Ohmic/charge-transfer limitations, particularly at higher lower cutoff voltages. Crucially, these results allow us to identify the rate-limiting mechanisms in different cathode configurations, offering clear insights into how cathode design can be optimized for improved performance. Understanding these mechanisms is essential for designing next-generation batteries with enhanced rate performance, which is critical for applications such as electric vehicles and renewable energy storage systems.

Brischetto, Martin (ORCID:0000000339865813)↗
DOE OSTI2024

A Strategic Condition Framework for Energy Innovation

Building upon previous work in innovation, technology, and economic fields, we propose a conceptual framework to address the interplay dynamics of public policy and the value chains of clean energy technology innovation systems, by focusing on market structural and strategic conditions in relation to the rate and direction of knowledge diffusion within activity-based value chains. Our framework extends beyond socio-technical transition models by considering such nuances as: 1) the implications of geography, 2) the locus of knowledge types, 3) the dynamics of financial and knowledge flow, and 4) emphasizing the importance of both market structure and institutional conditions. At the firm level, we consider dynamics of interactions between suppliers and customers, innovation activities, the competitive environment, and the firm’s broader strategic relationship to governance activities and structures; we allow for the fact that each of these aspects of a firm’s identity may have a strategically relevant geographic dimension (e.g., service territories, locational concentration of input resources, etc.). We provide a proof-of-concept application of the U.S. utility-scale solar photovoltaic (PV) and onshore wind sectors, including their interactions with the U.S. power market, which we in present in a web-based information platform (Energy I-SPARK, ei-spark.lbl.gov).

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

Co-transport of water and p-xylene through carbon molecular sieve membranes

Carbon molecular sieve (CMS) materials are a potential candidate for scalable and high-performance reverse osmosis membranes due to their impressive chemical and thermal stabilities. Moreover, they have the potential to enable impressive rejections of small neutral solutes from water based on their known ability to separate small organic molecules. CMS has been extensively examined for gas and organic solvent separations, but the transport of organic and aqueous mixtures through CMS microstructures is poorly understood. In this work, we investigated the sorption, diffusion, and permeation behavior of organic compounds and water in poly(vinylidene fluoride)(PVDF)-derived CMS (PVDF-CMS). Experimental observations of diffusion, sorption, and permeation shows how the properties of penetrants such as polarity and molecular size affect the transport rates and selectivity. These basic transport and sorption parameters are utilized in sorption-diffusion models to permeation rates of water-organic mixtures in CMS membranes. The transport of water and p-xylene in CMS was experimentally confirmed to follow the sorption-diffusion mechanism. The sorption-diffusion model ideal permselectivity indicates that the CMS is p-xylene selective over water. Water/p-xylene mixture permeation experiments revealed an increased selectivity of p-xylene over water, thus providing tentative evidence for a competitive sorption-selective separation mechanism. Furthermore, this work suggests that CMS membranes exhibit organic-permeable separation properties in water/organic separations. The results presented here highlight the potential for the removal of dilute organics in water via CMS pervaporation membranes.

02 PETROLEUM↗
DOE OSTI2024

Accelerated oxidation of epoxy thermosets with increased O 2 pressure

Polymer oxidation is usually accelerated with temperature, which is therefore applied in nearly every experimental approach dealing with predictive materials aging. Because of this simple approach, we may tend to neglect that the effective concentration of oxygen also acts as a rate multiplier for oxidation. Increasing the oxygen partial pressure in an aging environment accelerates oxidation, and while there is often a near proportional increase initially, the effect of additional oxygen usually transitions to a saturation level at some elevated pressure. This has been theoretically described in the general autoxidation scheme and is well recognized. However, for many materials the exact rate behavior under moderately increased oxygen concentration remains to be established. We therefore review epoxy oxidation and offer a broader overview of its behavior under increased O 2 partial pressure. Experimental data are given for a few thermoset materials demonstrating their rate behavior under O 2 partial pressure up to 4 atm, meaning approximately 20 times more than under standard atmospheric conditions. Confirmative evidence suggests that epoxy materials will reach saturation oxidation rates only at significantly higher O 2 partial pressure. In such a high-pressure regime it is theoretically possible to not only accelerate oxidation, but to transition into a condition where O 2 diffusion can be increased without further accelerating the oxidation rate. Finally, this can reduce diffusion limited oxidation effects under specific accelerated aging conditions as a combination of temperature and O 2 partial pressure.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A phase-field study of stainless-steel oxidation from high-temperature carbon dioxide exposure

An electrochemical phase-field model has been developed to investigate the oxidation mechanisms of the 21-2N valve stainless steel alloy exposed to carbon dioxide at 973 K. Three oxide phases observed in oxidation experiments are included in the model: Mn 3 O 4 , Cr 2 O 3 , and MnCr 2 O 4 . Local charge neutrality and the conserved current condition are assumed to include the impact of the electric potential on oxidation, though it is found to be negligible when the system is electrically isolated. The sensitivity of the oxidation processes to the values of the diffusion mobilities is examined, and the oxidation rate is calibrated against experimental data by modifying the sensitive mobilities. We find that both inward oxygen and outward metal diffusion are important for oxidation. Furthermore, by investigating the impact of the order of the initial oxide layers, we find that Cr 2 O 3 serves as a barrier to outward Mn diffusion. Moreover, controlling the initial oxide layer order can be used to limit oxidation.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Apparent Increasing Lithium Diffusion Coefficient with Applied Current in Graphite

In this study, we assert that the apparent lithium diffusion coefficient in graphite active particles in the negative electrodes of lithium-ion cells increases appreciably with the intercalation rate. This assertion is based on an electrochemical model analysis of a wide range of electrochemical micro-reference electrode full cell studies on a coated natural graphite and other literature results. Although the mechanism for this increase is a subject of further investigation, the results of our study suggest that the lithium transport in the graphite does not limit the maximum attainable charging rate in typical lithium-ion cells for electric vehicles.

25 ENERGY STORAGE↗
DOE OSTI2021

Revisiting diffusion-based moisture functions: why do they fail?

Microbial activities in soil are controlled by the balance between physical and biological mechanisms that are currently implied by soil moisture-respiration relationships, but not explicitly represented. Diffusion based moisture functions focus on physical controls, while substrate kinetics based models primarily address biological drivers. How to harmonize these two types of models for robust predictions of soil respiration and other processes has not been addressed. Here we derived a generalizable analytical solution of diffusion-limited nonlinear microbial uptake kinetics, in which microbial metabolic rates were governed by both physical and biological drivers via substrate diffusion and microbial affinity. We proposed a soil trait concept to integrate both physical and biological perspectives into one unified function, and tested it using both laboratory and field based observations from a variety of soils. This approach provides a tractable and scalable approach that incorporates soil heterogeneity and functional complexity in macroscopic model descriptions.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Structural, Spectroscopic, and Kinetic Insight into the Heating Rate Dependence of Studtite and Metastudtite Dehydration

Uranyl peroxide minerals studtite (UO 2 O 2 ·4H 2 O) and metastudtite (UO 2 O 2 ·2H 2 O) are important materials in the nuclear fuel cycle. When heated, they dehydrate and transform to amorphous uranium oxides (UO x ), yet phase stability and heating rate dependence of these transformations are poorly understood. This information is critical to proper management of fuel cycle materials. In this work, we use in situ powder X-ray diffraction (PXRD), Raman spectroscopy, and thermogravimetric analysis (TGA) to monitor the dehydration of studtite and metastudtite. Strong linear correlation between the heating rate and phase transition temperature is observed. Geometric contraction and diffusion-related kinetic models describe studtite dehydration at slow heating rates, whereas Avrami–Erofeev or reaction order models become more accurate for faster thermal treatments. A second order model describes the transition from metastudtite to UO x regardless of the heating rate. Water retention during studtite dehydration is indicated by PXRD, Raman spectroscopy, and TGA. Here, we observe mixed-phase UO x dehydration products of metastudtite with a likely formation mechanism involving conversion of some uranyl centers from hexagonal to pentagonal bipyramidal coordination units via peroxide liberation. Our observations clarify over 100 years of measurements on these materials and represent an advancement in understanding the chemical behavior of nuclear fuel cycle materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Oligomeric Ruthenium Polypyridyl Dye for Improved Stability of Aqueous Photoelectrochemical Cells

Water-splitting dye-sensitized photoelectrochemical cells rely on molecular sensitizers to harvest light energy and drive the catalytic reactions necessary to generate hydrogen and oxygen from water. The desorption of sensitizer molecules from the semiconductor–aqueous electrolyte interface is a significant barrier to the practical implementation of these cells. To address this problem, we synthesized an oligomeric ruthenium dye ([RuP] n ) that has dramatically improved stability as a photosensitizer for TiO 2 electrodes over the pH range of interest (4–7.8) for DSPECs. Additionally, the efficiency of photoelectrochemical charge separation is known to depend on the rate of cross-surface hole diffusion between dye molecules. The oligomeric dye ([RuP] n ) shows an order of magnitude faster cross-surface hole diffusion than the commonly used monomeric [Ru(bpy) 2 (4,4-PO 3 H 2 ) 2 bpy] 2+ (RuP) sensitizer. Finally, the enhanced stability of the polymeric dye also enables the use of intensity-modulated photovoltage spectroscopy to measure the recombination rate of photogenerated electrons and holes as a function of electrolyte pH.

14 SOLAR ENERGY↗
DOE OSTI2022

Fast estimation of reaction rates in spherical and non-spherical porous catalysts

Here we present a methodology for modeling multi-step reaction rates in porous catalyst particles for use in CFD-DEM and two fluid models. Single-step effectiveness factors based on a Thiele modulus, while useful, cannot accurately capture the cascading reaction systems common in high temperature vapor-phase chemical reactors like fluidized catalytic cracking units and catalytic biomass fast pyrolysis systems. Instead, multi-step effectiveness vectors derived from steady-state solutions to the governing reaction-diffusion equations are needed. Solutions for various catalyst shapes are presented, including spheres, cylinders, and prisms. Computational challenges inherent in repeated evaluation of reaction rates with diffusion limitations are discussed, and an efficient implementation based on pre-computed lookup tables is proposed and demonstrated on a simulation of a fluidized bed reactor. Open-source code is provided for the compilation of reaction rate tables for use in ODE, DEM, and two-fluid models.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

A kinetic model for simulating non-equilibrium mass transport in oxides applied to hematite growth under irradiation

We propose an approach to simulating the dynamic evolution and transport of charged point defects within and through the oxide scales that form during corrosion. The method follows the cluster dynamics formalism widely adopted for radiation damage in solids, which can apply in both quasi-static and far from equilibrium conditions, such as in radiation environments. By treating each charged defect as a cluster of an atomic defect and associated unit charges, the proposed model flexibly allows charge state transitions and shifts in the Fermi level by absorption and emission of charge carriers from point defects in a reaction network with rates constrained by local equilibrium. Applying this model to hematite predicts changes in self-diffusion and oxidation kinetics in irradiation environments, surprisingly showing reduced oxidation rates in many conditions, despite enhanced self-diffusion. In conclusion, the origin of this effect lies in a change in Fermi level induced by excess vacancies formed under irradiation, which in turn suppresses the transport of cation interstitials which facilitate hematite growth.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Evaluating the Feasibility of Using Strain Measured During Sinusoidal Rate Pumping Tests to Characterize an Aquifer

Pumping tests with sinusoidal variation in pumping rate have been proposed as a method for improving aquifer characterization. These tests can interrogate a larger aquifer volume than slug tests and they can be more sensitive to small variations in drawdown. Current methods of using sinusoidal variations of rate are based on measuring pressure signals from the reservoir or aquifer, which requires access to monitoring wells. An alternative approach has been developed that measures the strain in the vadose zone instead of pressure in the reservoir. An instrument has been developed at Clemson University that can measure small strains using optical fiber sensors, and we propose that it can be used to measure strain during sinusoidal pumping tests. The objective of this project is to evaluate the feasibility of measuring and interpreting the vertical strain in the vadose zone generated during a sinusoidal rate pumping tests to estimate aquifer and/or overburden properties. Pumping tests were performed at a site with a water table at 9 m and saturated saprolite from 9 to 30m depth. Sinusoidal pumping tests in the saprolite used different pumping amplitudes and periods while pressure was measured at three piezometers and vertical strain was measured in the vadose zone from 1 to 7 m depth. The delay time of the pressure increased linearly with distance, and it increased with the square root of the period, while the amplitude of the pressure decreased with distance and increased with amplitude. Vertical strain in the vadose zone varied with the same period as the pumping rate and the delay times were similar to those for pressures measured at similar radial distances. Delay times for the strain increased with an increasing propagation of the strain field. The hydraulic diffusivity was estimated using delay times for pressure and strain, and the results were compared with the values estimated from a constant-rate pumping test. The hydraulic diffusivity from the constant rate test was 0.039 m2/sec, whereas it was 0.053 (±0.05) m2/sec and 0.035 (±0.03) m2/sec from the pressure data and 0.08 (±0.022) m2/sec and 0.035 (±0.001) m2/sec from the strain data from sinusoidal tests of various periods and amplitudes. There is no statistical difference among these values. This study indicates that strain measurements in the vadose zone can be used to estimate aquifer properties during sinusoidal pumping tests.

Blais, Riley↗