Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Deactivation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Nanoarray-Based Monolithic Adsorbers for SO 2 Removal

Nanoarray-based monolithic catalysts have been developed for various applications, including CO oxidation, hydrocarbon combustion, lean NO x trapping, and low-pressure CO 2 hydrogenation. In this work, SO 2 adsorption properties have been explored and evaluated on the cordierite honeycomb monoliths grown with zinc oxide nanoarray (ZnO), zinc oxide nanoarray washcoated by BaCO 3 nanoparticles (ZnO/BaCO 3 ), and manganese oxide nanowire array with cryptomelane structure (MnO x ) at a temperature range from 50 to 425 °C. All samples show temperature-dependent SO 2 adsorption behaviors. The adsorption results reveal the performance order: MnO x > ZnO/BaCO 3 > ZnO, with ~ 90% SO 2 adsorbed in MnO x at 425 °C. Washcoated BaCO 3 contributes to the improvement of SO 2 adsorption in ZnO nanoarray, and the best performance displayed in MnO x may be attributed to their high specific surface area. After regeneration, nanoarrays all exhibit good thermal stability during test-regeneration cycles. No additional phase is formed in regenerated ZnO nanoarrays (ZnO-R), while BaCO 3 is converted to BaSO 4 in the regenerated ZnO/BaCO 3 nanoarrays (ZnO/BaCO 3 -R), and the sulfur species (possibly MnSO 4 ) and Mn 2 O 3 are found in regenerated MnO x nanoarrays (MnO x -R). It is noted that a small amount of sulfur species (possibly MnSO 4 ) may promote the SO 2 adsorption of MnO x -R at a lower temperature, while the formed Mn 2 O 3 contributes to the deactivation of MnO x -R.

36 MATERIALS SCIENCE↗
DOE OSTI2024

The stability of single-atom catalysts in thermocatalysis

Abstract Single-atom catalysts (SACs) featuring 100% atom utilization and uniform isolated active sites have been receiving sustainable attention over the last decade, as they offer exceptional performance in various catalytic applications. The motivation behind studying SACs is to develop highly active, selective, and stable catalysts for industrial applications with desirable economic and ecological benefits. Despite their promising potential, SACs face challenges related to stability, which need to be addressed for practical implementation. In this mini-review we discuss the existing stability issues of SACs, and summarize the deactivation mechanism and behaviors, protective strategies, and regeneration methods of SACs. We highlighted the challenges and prospects of future SACs study, aiming to pave the way for their widespread application in industrial processes.

Chae, Sudong↗
DOE OSTI2020

Enzyme interactions on lignocellulosic biomass structure

This chapter shows that, although well studied over the years, the cellulose enzymatic hydrolysis process has still many obstacles to be overcome or minimized. High enzyme loading and relatively long incubation periods are generally required for effective cellulose saccharification to be achieved. These limitations make the process unattractive from an economic perspective. Most studies show that the conversion rate of cellulose hydrolysis decreases over reaction time due to several factors that may inhibit, deactivate, or slow the work of enzymes. Some of these factors are inhibition by the product generated; inhibition/deactivation of enzymes by by-products generated during pretreatment (PT); limitation of mass transfer; shear stress by high stirring; air–liquid interfacial area; and unproductive adsorption on lignin or other compounds present in the biomass. The interaction between cellulases and the lignin present in these biomasses has a major negative impact on the process, with the source of the raw material and the type of PT used having a strong influence on it. Finally, the use of nonenzymatic proteins seems to be the best way to mitigate this problem.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2021

Ordering effects on deformation substructures and strain hardening behavior of a CrCoNi based medium entropy alloy

Here, a CrCoNi based medium entropy alloy with small additions of Ti, Al and Nb (denoted as (CrCoNi) 93 Al 4 Ti 2 Nb) in the as-quenched condition, exhibits tensile properties comparable to those of the equiatomic CrCoNi alloy at room temperature. Dark field transmission electron microscopy (TEM), atomic resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) together with atom probe tomography (APT) show that spatially-localized long range ordering (LRO) L1 2 domains exist in this alloy. The evolution of deformation substructure with plastic deformation in this alloy was characterized using electron backscatter diffraction (EBSD), electron channeling contrast imaging (ECCI) and STEM based techniques including the recently developed weak beam dark field STEM imaging. Plastic deformation occurs by the slip of a/2<110>dislocations, which are narrowly dissociated into Shockley partial dislocations on {111} slip planes. Their dissociation distances in the (CrCoNi) 93 Al 4 Ti 2 Nb alloy are much smaller than the widths of the corresponding partials in the equiatomic CrCoNi alloy due to one or more of the minor alloying elements (Al, Ti, Nb). Dislocation slip in this alloy has a pronounced planar character. The leading dislocations in slip bands glide as pairs due to the existence of LRO domains. Multipoles were formed through the slip of dislocations with opposite signs on adjacent {111} slip planes. Those multipoles serve as building blocks for the formation of subgrain structures consisting of fine slip bands. The distances between slip bands were continuously refined during plastic deformation and dynamic refinement of slip bands plays a crucial role in strain hardening. The effects of LRO domains on planar dislocation slip, the deactivation of deformation twinning and strain hardening of this alloy are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Engineering the Composition of Bimetallic Nanocrystals to Improve Hydrodeoxygenation Selectivity for 2-Acetylfuran

Hydrodeoxygenation (HDO) of 2-acetylfuran (2-AF) was examined at 473 K and 33 bar over carbon-supported, bimetallic catalysts. Monodispersed, Pt-based (PtNi, PtCo, and PtCu) and Ni-based (NiCu) nanocrystals (NCs) with well-defined sizes and compositions were prepared via colloidal synthesis. Steady-state, flow-reactor measurements demonstrate that selectivities for the HDO reaction to 2-ethylfuran (2-EF) are strongly dependent on the alloy compositions. The HDO of 2-AF is shown to be sequential, where 2-EF can react further to form over-hydrogenated products. The NiCu 3 /C nanocatalyst was superior to the other bimetallics; with the optimal residence time, it was possible to achieve a selectivity of 75% 2-EF with 80% conversion of 2-AF, with good stability for up to at least 5 hours time-on-stream. Deactivation due to coking became an issue when the NCs were deposited on oxide supports with weak acidity (SiO 2 and γ-Al 2 O 3 ). Furthermore, this work provides insights into which bimetallic catalytic systems might be useful for HDO of 2-AF reaction.

2-acetylfuran↗
DOE OSTI2020

A critical literature review of the advances in methane dehydroaromatization over multifunctional metal-promoted zeolite catalysts

We report the drastic rise in shale gas production has encouraged the quest for alternative uses of methane as a chemical feedstock in the manufacturing industry. While two-step syngas routes for methane valorization are deployed commercially, direct one-step routes for methane conversion are attracting much attention. As steam cracking installations have shifted from using oil-based naphtha to shale-based natural gas liquids, production of aromatics has dropped. Methane dehydroaromatization (MDA) is a one-step reaction capable of valorizing methane to hydrogen and benzene. Challenges with the MDA reaction are two-fold: the reaction is thermodynamically limited with low one-pass methane conversion and even the best catalytic systems, Mo/zeolites, suffer rapid deactivation from coking. A catalyst design strategy to improve stability is the use of multifunctional Mo-X/zeolite systems where X is a dopant capable of modulating the stability. In this paper we provide a complete overview of the main Mo-X/zeolite systems used in MDA and critically draw connections among the different types of dopants (X) employed, as a function of the role they play in the reaction/deactivation pathway. We have also dedicated a section to emerging trends with non-Mo based catalysts. The goal of this review article is to establish a basis that will facilitate the identification of useful multifunctional catalytic systems, and recognize gaps in the knowledge of these systems that deserve more attention. Improving MDA systems to the point to which they can be commercially deployed requires a multifaceted approach that combines optimization of the designs of both the catalyst and the reactor configuration. We therefore also provide a brief overview of the most recent advances in process intensification strategies employed with different reactor configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Structure sensitivity and its effect on methane turnover and carbon co-product selectivity in thermocatalytic decomposition of methane over supported Ni catalysts

We explore how thermocatalytic decomposition of methane (TCD) is a promising approach for producing CO 2 -free hydrogen and solid carbon co-product. In this study, a series of Al 2 O 3 - and MgAl 2 O 4 -based Ni catalysts, prepared with varying synthesis and pretreatment methods, were evaluated for methane TCD performance at 650°C and characterized before and after reaction to elucidate activity-structure relationships. We found that methane TCD turnover increases with Ni particle size. Further, large Ni particle sizes (i.e., >20 nm) are selective toward the formation of carbon nanotubes (CNTs), while small Ni particle sizes (i.e., <10 nm) are selective toward the formation of graphitic carbon layers. The formation of graphitic carbon layers block access to Ni active sites, thus rendering the catalyst inactive more quickly than when CNTs are produced. Additionally, the catalyst deactivation observed with time-on-stream is due to the fragmentation of Ni particles into smaller Ni particles followed by their encapsulation with graphitic carbon layers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Assessment and comparison of ordered & non-ordered supported metal oxide catalysts for upgrading propane to propylene

Propylene is an important chemical feedstock that is largely produced via cracking of oil-derived naphtha. Direct conversion of propane into propylene may be a more attractive alternative. Specifically, propane dehydrogenation (DH) and oxidative dehydrogenation (ODH) are promising for this transformation, albeit only DH has been industrially implemented. However, even the best DH catalysts (Pt-based) still suffer from deactivation. VO x - and BO x -based ODH catalysts result in significant over-oxidation and lack a mechanistic understanding. A common challenge in developing these catalysts is the broad distribution of surface species caused by the use of non-ordered catalyst supports. This hampers clear structure-performance correlations. Recent progress in the preparation of well-defined active sites on ordered supports has brought about improved catalysts, as well as fundamental insight into the working mechanism. This review will highlight recent advancements in the development of these catalysts and provide direction on the use of ordered supports for propane upgrading.

03 NATURAL GAS↗
DOE OSTI2022

Olefin methylation over iron zeolites and the methanol to hydrocarbons reaction

The effect of olefin addition to a stream of dimethyl ether on the methanol homologation reaction is investigated using iron-substituted zeolites Fe-beta and Fe-ZSM-5. The reaction was investigated using plug-flow microreactors in the temperature range of 240–400 °C, at a total pressure of 0.239 MPa and a WHSV of 6.12 (g DME/ gcat -hr). For Fe-beta (Si/Fe= 9.2) catalysts, isobutene co-feeding almost doubles dimethyl ether (DME) consumption rate and shifts selectivity towards larger olefins with carbon numbers from 5 to 7. Addition of isobutene above 6.3%, however, resulted in a reduction of DME consumption rates, an effect assigned to the replacement of surface methoxy groups for adsorbed olefins in the zeolite pores. Below a temperature of 340 °C hydride-transfer rates are negligible; reaction rates are stable for over 5.5 h and the products consist almost exclusively of olefins and a small amount of methane. Above 360 °C the onset of catalytic hydride transfer processes is observed leading to fast catalyst deactivation rates and an increase in the concentration of aromatic species. Iron ZSM-5 (Si/Fe = 21.4) catalysts under similar reaction conditions consumes methanol faster than Fe-beta at approximately three times the TOF (on a per iron basis). The Fe-ZSM-5 catalyst was selective to a distribution of products (C5 to C8) as compared to Fe-beta which was selective to primarily C5 and C7. Co-feeding larger olefins (2-methyl-2-butene, 2,3-dimethyl-2-butene, 2,3,3-trimethyl-1-butene, and 2,4,4-trimethyl-2-pentene) at a 3.9% olefin concentration over Fe-beta changed selectivity towards cracking products (C4 compounds such as isobutene). As the size of the olefin increases, a reduction of DME consumption rate is also observed. Here these results show that co-feeding olefins with DME over Fe-zeolites is a promising route to increase methylation rates at relatively low temperatures producing larger branched olefins and that the product distribution is highly dependent on the zeolite pore size and structure of the olefin.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

Stepwise impregnation of bimetallic catalysts for carbon nanotube synthesis

Supported bimetallic catalysts are widely used for carbon nanotube (CNT) synthesis, yet the effects of impregnation procedure remain underexplored. Here, we investigated how the sequence of metal impregnation affects CNT synthesis. We prepared cobalt-molybdenum (Co-Mo) bimetallic catalysts on alumina supports via co- and stepwise impregnation, then compared their CNT synthesis performance under identical conditions. Stepwise-impregnated catalysts exhibited higher carbon yields than those prepared by co-impregnation. Notably, impregnating Mo after Co achieved the highest yield despite the lowest BET surface area. Synchrotron X-ray diffraction and visible/UV-Raman spectroscopy revealed that only this catalyst contained Al 2 (MoO 4 ) 3 with a MoO 4 structure. X-ray photoelectron spectroscopy clarified the surface chemistry: the catalyst with the highest CNT productivity exposed Mo entirely as Mo 6+ in Al 2 (MoO 4 ) 3 and CoMoO 4 , whereas the others contained both Mo 4+ and Mo 6+ . The MoO x species like Al 2 (MoO 4 ) 3 is known to suppress Co sintering during CNT synthesis, delaying catalyst deactivation and enhancing the carbon yield. Moreover, an inverse relationship was observed between carbon yield and the CoMoO 4 content. This is attributed to the consumption of catalytically active Co during CoMoO 4 formation, which reduces active sites for CNT growth. ICP-OES further confirmed higher Co and Mo loadings for stepwise catalysts, contributing to superior catalyst performance. The extent of CoMoO 4 formation strongly depended on the metal introduction sequence. In conclusion, this trend is illustrated by considering the relationship between the point of zero charge of support and the pH of the metal precursor solutions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

An ultrastable heterostructured oxide catalyst based on high-entropy materials: A new strategy toward catalyst stabilization via synergistic interfacial interaction

Designing high–performance catalysts that can stabilize catalytic active sites against sintering to deactivation at temperature higher than 900°C is significant but challenging. In this work, we report a new strategy to obtain a transition metal oxide catalyst with high temperature stability for CO oxidation. This is achieved through a synergistic interfacial interaction at the interface of a heterostructure between high– entropy oxides (HEO, high temperature stability) and CuCeO x (catalytic site). The catalytic site (CuCeO x ) for CO oxidation is realized by dissolving an amount of Cu species in HEO into CeO 2 via an entropy–driven mechanochemical process. In situ XRD and HAADF–STEM have confirmed the high temperature stability of the heterostructure CuCeO x –HEO, which can remain its CO oxidation catalytic activity at elevated temperatures. It should be expected that this innovative will offer the potential to the synthesis of catalysts with high temperature stability in industry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Alkylation of lignin-derived aromatic oxygenates with cyclic alcohols on acidic zeolites

Moderately strong BAS and spacious microporous environments (i.e., large-pore acidic zeolites HBEA and HY) are important criteria for efficient alkylation of phenols with cyclic alcohols and alkenes, while very strong BAS appear to be responsible for catalyst deactivation. BAS confined in HBEA and HY pores show substantially higher turnover frequencies compared to solids without molecularly sized pore constraints. HBEA favors the formation of mono-alkylates, while enhanced formation of di-alkylates is observed on HY. Dehydration of alcohols always dominates over the alkylation at the onset of the reaction. Carbenium ions, the direct electrophile for aromatic oxygenates, are produced mainly from the adsorption and protonation of olefins. The present study shows that for the alkylation of phenols and cyclic alcohols in apolar liquids, the alcohol concentration should be kept low to avoid the formation of unreactive surface dimers and mitigate their inhibitory effects on olefin adsorption and protonation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

The superior hydrothermal stability of Pd/SSZ-39 in low temperature passive NOx adsorption (PNA) and methane combustion

We successfully synthesized uniform SSZ-39 with an average crystal size of about a micron. Pd (0.7 - 3 wt%) was supported on SSZ-39 with Si/Al ratio ~12. The as-synthesized materials were characterized by FTIR, XRD, Helium Ion Microscopy, HAADF-STEM imaging, 27 Al, 29 Si and H solid state NMR spectroscopic techniques. FTIR studies with CO and NO probe molecules reveal that the 0.7 wt% Pd/SSZ-39 material with Si/Al ~12 has the majority of Pd dispersed atomically as isolated Pd(II) and Pd(II)-OH centers, and thus can be used as a low-temperature passive NOx adsorber. Pd(II)-NO, Pd(II)(OH)(NO) and Pd(II)(CO)(NO) complexes form during PNA in this material. We compare this PNA material directly with the Pd/SSZ-13 system (with Si/Al ratio ~12) and show its superior hydrothermal stability. Remarkably, Pd/SSZ-39 with Si/Al ratio ~12 survives hydrothermal aging up to 815 ºC in 10% H 2 O/Air vapor for 16 hours without significant loss in activity. The SSZ-39 crystal structure remains intact during hydrothermal aging up to 1,000 ºC as we elucidate it with XRD and HAADF-STEM imaging/EDS mapping. However, changes to the framework during such harsh hydrothermal treatment significantly change the NOx release profiles during PNA as evidenced by high-field 27 Al NMR on fresh and aged Pd/SSZ-39 samples as well as PNA performance measurements. Besides PNA application, these hydrothermally very stable materials (3 wt% Pd on SSZ-39 with Si/Al ratio ~12) can be used as a robust methane combustion catalyst under industrially relevant conditions (GHSV~600,000hr -1 ). This catalyst shows minimal deactivation after both harsh hydrothermal aging at 750 and 800 ºC, and prolonged time on stream (105 hrs) at 425 °C. In contrast, both 3wt% Pd/alumina and 3wt% SSZ-13 supported samples lose a significant portion of their activity. Our study opens new avenues to prepare the most hydrothermally stable known Pd/zeolite materials with applications for adsorption and catalytic hydrocarbon combustion under industrially relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Spectroscopic insight into carbon speciation and removal on a Cu/BEA catalyst during renewable high-octane hydrocarbon synthesis

Conversion of methanol and dimethyl ether (DME) to high-octane gasoline catalyzed by beta zeolite (BEA) provides an opportunity for the production of high-quality fuels from renewable carbon sources (e.g., gasified biomass). Recent research demonstrated that a Cu-modified BEA zeolite catalyst (Cu/BEA) offered advantages over the unmodified BEA catalyst due to multifunctional Cu species that enabled incorporation of co-fed H2, reactivation of light alkanes, and reduction of products from the aromatic hydrocarbon pool. The shift in hydrocarbon pool chemistry has the potential to influence the identity and relative composition of surface carbon species that are often linked to deactivation. A detailed understanding of these carbon species is important to develop an effective and efficient regeneration procedure that can enable the transition from fundamental catalyst development to commercial application. Here, we applied complementary ex situ and in situ characterization techniques to compare the structures of surface carbon species on post-reaction Cu/BEA and unmodified BEA catalysts. Both catalysts contained acyclic and aromatic hydrocarbons along with graphitic carbon species. However, the post-reaction Cu/BEA catalyst had a lower polycyclic aromatic content, and further, the graphitic species were more hydrogenated and defective. It was also found that the presence of Cu promoted carbon removal at lower temperatures than for unmodified BEA through activation of O2 by Cu oxide during thermal oxidation. The fundamental insight into the composition of surface carbon species enabled the design of an effective and efficient regeneration strategy for the DME homologation reaction over Cu/BEA, resulting in full recovery of the catalyst activity.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2022

CO 2 hydrogenation: Selectivity control of CO versus CH 4 achieved using Na doping over Ru/m-ZrO 2 at low pressure

By doping 1%Ru/m-ZrO 2 with sodium, selectivity tuning between CO and CH 4 during CO 2 hydrogenation was achieved by controlling the relative rates of reverse water-gas shift and CO methanation. By increasing basicity through Na loading: (1) the formate C-H bond is weakened in DRIFTS of adsorbed CO, accelerating C-H bond formation of formate and promoting CO formation at the Ru/m-ZrO 2 interface; and (2) the coverage of Na increases on ensembles of Ru atoms responsible for methanation. Increasing Na content shifts selectivity from CH 4 (useful for synthetic natural gas) to CO, which can be used for Fischer-Tropsch synthesis or methanol-to-gasoline. Electronic modification of formate is likely due to enhanced basicity (strengthening bonding between catalyst and the-CO 2 function of formate and weakening C-H). In conclusion, no electron transfer from Na to Ru was detected in XANES. DRIFTS as a function of time and XPS results showed that Na exacerbates site blocking and deactivation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Robust palladium hydride catalyst for electrocatalytic formate formation with high CO tolerance

Palladium is unique in the electrocatalytic reduction of CO 2 to formate because of its low or even near-equilibrium onset potential. However, the inevitably produced CO molecules poison and deactivate the catalyst surface, resulting in an insufficient operating lifetime (<30 min) for conventional and optimized Pd catalysts. In this work, we present a hydrogen-rich Palladium hydride catalyst (PdH0.5/C) derived from a one-step solvothermal synthesis. This catalyst showed a 93.1 % faradaic efficiency towards formate at – 0.4 V (vs RHE). The working lifetime reached a record of 4 h, which was ~15 times longer than a commercial Pd catalyst and outperformed all previous Pd-based electrocatalysts for CO 2 -HCOO – conversion. The high CO tolerance was attributed to the selectivity improvement induced by lattice hydrogen and the weak CO adsorption strength on diverse active sites (i.e. kink, step, and terrace). Isotopic analysis revealed a direct participation of the lattice hydrogen in the protonation of CO 2 molecules in formate formation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

In-situ monitoring of atomically dispersed Pt sites supported on OMS-2 during CO 2 activation

Atomically dispersed catalysts have drawn great interest lately, as they showcase a high density of active sites, selectivity, and high turnover frequencies in oxidation chemistry due to labile oxygen activation. In contrast, the applications of these catalysts have lagged in reduction reactions due to the ambiguity caused by the sintering and restructuring of active sites. To bridge this gap, the evolution of Pt 4+ isomorphically substituted into an octahedral molecular sieve structure (OMS-2) under reductive conditions was correlatively characterized using multiple in-situ analytical techniques such as ambient pressure X-ray photoelectron spectroscopy, environmental transmission electron microscopy, and solid-state nuclear magnetic resonance. The surface dynamics of the Pt single atoms were revealed during the Reverse Water Gas Shift (RWGS) reaction, where the active sites were identified as two-coordinated platinum single atoms. Under reaction, we show nonbinding atoms adjacent to the single atoms restructured the motif of the single atoms to Pt 2+ via ion mobility of potassium, increasing the activation energy by 25.6 kJ/mol. Here, this work also highlights the potential for increased stability of the single atom sites via isomorphic substitution of the metal oxide support, since the Pt-OMS-2 catalyst retained activity for about 33 h before deactivation, after which nanoparticles were observed in TEM images. This work offers a new perspective in single atom synthesis using the metal oxide as the host for the single atom site, instead of adatoms on the surface

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗