Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data search”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

NASA’s Moon Trek Portal: New Capabilities Supporting Mission Planning and Engagement

Introduction: NASA’s Moon Trek (https://trek.nasa.gov/moon/) is one of a growing number of interactive, browser-based, online portals for planetary data visualization and analysis produced by NASA’s Solar System Treks Project (SSTP). Moon Trek continues to be enhanced with new data and new capabilities enabling it to facilitate the planning and conducting of upcoming lunar missions by NASA, its commercial partners, and its international partners, as well as advancing its role as a valuable outreach tool. A Comprehensive Online Web Portal: Developed at NASA’s Jet Propulsion Laboratory (JPL) and managed as a project of NASA’s Solar System Exploration Research Virtual Institute (SSERVI) at NASA Ames Research Center, Moon Trek is a browser-based web portal. The portal provides easy-to-use tools for browsing, data layering, data product blending, and feature search among thousands of data products covering topography, mineralogy, elemental abundance, geology, and much more. Visualizations are provided in var-ious map projections, interactive 3D viewing, and in virtual reality. Using an in-house stereo workflow, SSTP is able to produce new NAC-based high-resolution mosaics and DEMs. Diverse Applications for Lunar Exploration: Baseline analytic tools available to all users include dis-tance measurement, elevation profiling, sun angle calculation, and 3D print file generation. More advanced account-level tools allow users to perform more computationally intensive analyses. These include ray-traced lighting analysis for user-specified areas over user-specified time/date ranges and time intervals, electro-static surface potential analysis, subsetting of large data products, slope analysis, and Lunar Laser Ranging geometry calculation. Artificial intelligence (AI) and ma-chine learning (ML) based tools have been implemented for crater detection and hazard analysis, boulder detection and hazard analysis, and rockfall detection. New Tools Facilitating Exploration: Additional, new tools have recently been added and others are in development, offering even greater functionality in con-ducting analyses of potential landing sites and areas of surface operations. The new Line-of-Sight tool facilitates communications planning between locations on the lunar surface, between any given site on the lunar surface and a specified ground station on the Earth, and between a site on the lunar surface and a relay asset in lunar orbit, all taking into account local lunar topography. The new Data Plotter tool provides both tabular and graphical representations of pixel values along a user specified path for a growing number of data products. The new NAC Finder tool will identify and pro-vide access to NAC images that intersect a user-defined path or bounded area. The SSTP development team is looking to leverage the capabilities of its existing AI and ML crater, boulder, and rockfall detection and analysis tools, and extend that technology to a generalized feature detector that can be trained on instances of specific types of landforms and then search the lunar surface for more examples of such features. New traverse planning tools are being developed with use cases in generalized concept studies and specific mission planning in mind. These will facilitate finding optimal traverse paths based on constraints such as slope, lighting, hazard avoidance, and communications. These will be complemented by new traverse visualization capabilities. Users will be able to interactively ride along with a rover, examining 3D views of the terrain while adjusting camera height and viewing angle along with selecting different data layer overlays to drape across the terrain. Engaging the Public: The capabilities being developed for mission planning are being leveraged to further enhance Moon Trek’s proven utility as a valuable public outreach resource. This includes providing multiple lev-els of engagement with different points of entry. At its simplest level, promoting understanding through visualization, media and the public will be able to easily visualize and conduct their own exploration of lunar sites targeted by NASA and its partners. For a more in-depth experience, we are working with our stakeholders to promote understanding through interaction by extend-ing our current landing site and traverse analysis capabilities, making simplified access to these tools available to those who want to explore more deeply key factors in planning a mission through interactive and possibly even gamified experiences. The highest degree of public outreach, focusing on engagement through scientific participation, could be achieved through our work with missions and the NASA Office of the Chief Scientist on Moon Trek’s extension as a tool with specialized capabilities for facilitating citizen science. In such scenarios, participants become members of extended mis-sion science teams, using dedicated and integrated interfaces to analyze mission data to help answer questions key to lunar science and exploration. We are work-ing with NASA’s Office of Communications, museums, planetariums, and the media to help them easily integrate accurate, detailed visualizations of NASA’s lunar destinations and exploration into their content/productions and to engage diverse audiences in diverse venues.

Moon Trek↗
NASA NTRS1997

A Search for Nontriggered Gamma-Ray Bursts in the BATSE Database

We describe a search of archival data from the Burst and Transient Source Experiment (BATSE). The purpose of the search is to find astronomically interesting transients that did not activate the burst-detection (or "trigger") system on board the spacecraft. Our search is sensitive to events with peak fluxes (on the 1.024 s timescale) that are lower by a factor of approximately 2 than can be detected with the on-board burst trigger. In a search of 345 days of archival data, we detected 91 events in the 50-300 keV range that resemble classical gamma-ray bursts but that did not activate the on-board burst trigger. We also detected 110 low-energy (25-50 keV) events of unknown origin that may include activity from' soft gamma repeater (SGR) 1806-20 and bursts and flares from X-ray binaries. This paper gives the occurrence times, estimated source directions, durations, peak fluxes, and fluences for the 91 gamma-ray burst candidates. The direction and intensity distributions of these bursts imply that the biases inherent in the on-board trigger mechanism have not significantly affected the completeness of the published BATSE gamma-ray burst catalogs.

Kommers, Jefferson M.↗
NASA NTRS2016

Description of the TCERT Vetting Reports for Data Release 25

This document, the Kepler Instrument Handbook (KIH), is for Kepler and K2 observers, which includes the Kepler Science Team, Guest Observers (GOs), and astronomers doing archival research on Kepler and K2 data in NASAs Astrophysics Data Analysis Program (ADAP). The KIH provides information about the design, performance, and operational constraints of the Kepler flight hardware and software, and an overview of the pixel data sets available. The KIH is meant to be read with these companion documents:1. Kepler Data Processing Handbook (KSCI-19081) or KDPH (Jenkins et al., 2016). The KDPH describes how pixels downlinked from the spacecraft are converted by the Kepler Data Processing Pipeline (henceforth just the pipeline) into the data products delivered to the MAST archive. 2. Kepler Archive Manual (KDMC-10008) or KAM (Thompson et al., 2016). The KAM describes the format and content of the data products, and how to search for them.3. Kepler Data Characteristics Handbook (KSCI-19040) or KDCH (Christiansen et al., 2016). The KDCH describes recurring non-astrophysical features of the Kepler data due to instrument signatures, spacecraft events, or solar activity, and explains how these characteristics are handled by the pipeline.4. Kepler Data Release Notes 25 (KSCI-19065) or DRN 25 (Thompson et al., 2015). DRN 25 describes signatures and events peculiar to individual quarters, and the pipeline software changes between a data release and the one preceding it.Together, these documents supply the information necessary for obtaining and understanding Kepler results, given the real properties of the hardware and the data analysis methods used, and for an independent evaluation of the methods used if so desired.

Instrument↗
NASA NTRSDate not supplied

RadLab: A Comprehensive Database and Graphical and Programming Interfaces for Space Radiation Data

RadLab, a component of the NASA Open Science Data Repository (OSDR), is a database of radiation measurements from multiple instruments and spacecraft that provides visual and programmatic interfaces for interrogation and retrieval of these data. The attributes of data available through RadLab include spacecraft, types of radiation sensing instruments, locations within the spacecraft (e.g. ISS modules), associated celestial bodies, trajectories, and spacecraft coordinates; the primary type of data is the absorbed dose rate, as well as flux and dose equivalent rate where available. The application programming interface (API) implements a request syntax for retrieval of timestamped data filtered by various combinations of such attributes; the graphical user interface (GUI) extends this functionality with visualizations (time series plots, comparison plots, geospatial visualizations) which provide easy means to assess data availability, iteratively refine search parameters, interactively inspect the data, and export target data subsets. Datasets are continuously being added to the RadLab database as part of the rolling release process. Investigators from multiple countries, including the US, Canada, Germany, Bulgaria, Hungary, Italy, Japan, Russia and the Czech Republic, have committed to provide data from their instruments in and beyond low Earth orbit. The current release contains datasets provided by US and international collaborators and includes readings from multiple modules of the ISS, the BioSentinel CubeSat, Chang’e 4, the Lunar Reconnaissance Orbiter, the ExoMars Orbiter, and the Curiosity rover. Datasets are associated with respective RadLab knowledgebase articles which include instrument descriptions and provide bibliographical references. RadLab aims to provide a comprehensive, dynamic compendium of space radiation data, enabling the scientific community to perform analyses of data from multiple detectors and to determine the radiation environment of research missions and experiments. Some of its applications include inference of absorbed radiation dose for NASA GeneLab payloads, and training predictive models as part of the 2024 FDL-X challenge. The platform is actively expanding and seeking additional data, with plans to also cover past (e.g. Shuttle, Mir) and future (e.g. Artemis) missions. The RadLab Working Group has been created to aid in this process as well as to foster collaborations among data contributors and users, to develop standards for data harmonization, and to guide the development of the platform, with the goal to establish the use of RadLab in space radiation research and to advance our understanding of the radiation environment in outer space.

Kirill Grigorev↗
NASA NTRSDate not supplied

RadLab: A Comprehensive Database and Graphical and Programming Interfaces for Space Radiation Data

RadLab, a component of the NASA Open Science Data Repository (OSDR), is a database of radiation measurements from multiple instruments and spacecraft that provides visual and programmatic interfaces for interrogation and retrieval of these data. The attributes of data available through RadLab include spacecraft, types of radiation sensing instruments, locations within the spacecraft (e.g. ISS modules), associated celestial bodies, trajectories, and spacecraft coordinates; the primary type of data is the absorbed dose rate, as well as flux and dose equivalent rate where available. The application programming interface (API) implements a request syntax for retrieval of timestamped data filtered by various combinations of such attributes; the graphical user interface (GUI) extends this functionality with visualizations (time series plots, comparison plots, geospatial visualizations) which provide easy means to assess data availability, iteratively refine search parameters, interactively inspect the data, and export target data subsets. Datasets are continuously being added to the RadLab database as part of the rolling release process. Investigators from multiple countries, including the US, Canada, Germany, Bulgaria, Hungary, Italy, Japan, Russia and the Czech Republic, have committed to provide data from their instruments in and beyond low Earth orbit. The current release contains datasets provided by US and international collaborators and includes readings from multiple modules of the ISS, the BioSentinel CubeSat, Chang’e 4, the Lunar Reconnaissance Orbiter, the ExoMars Orbiter, and the Curiosity rover. Datasets are associated with respective RadLab knowledgebase articles which include instrument descriptions and provide bibliographical references. RadLab aims to provide a comprehensive, dynamic compendium of space radiation data, enabling the scientific community to perform analyses of data from multiple detectors and to determine the radiation environment of research missions and experiments. Some of its applications include inference of absorbed radiation dose for NASA GeneLab payloads, and training predictive models as part of the 2024 FDL-X challenge. The platform is actively expanding and seeking additional data, with plans to also cover past (e.g. Shuttle, Mir) and future (e.g. Artemis) missions. The RadLab Working Group has been created to aid in this process as well as to foster collaborations among data contributors and users, to develop standards for data harmonization, and to guide the development of the platform, with the goal to establish the use of RadLab in space radiation research and to advance our understanding of the radiation environment in outer space.

Kirill Grigorev↗
NASA NTRS1992

The preliminary Long Duration Exposure Facility (LDEF) materials data base

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated for LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux), and author(s) or principal investigator(s). The LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which was computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. This paper describes the LDEF Materials Data Base and includes step-by-step example searches using the data base. Information on how to become an authorized user of the system is included.

Funk, Joan G.↗
NASA NTRS1988

Results of software error-data experiments

In order to evaluate existing software reliability models and proposed modeling approaches, a search was conducted for data on the software failure process. This search revealed that the data necessary for this evaluation were not available. As a result, a research effort was initiated by NASA to generate data on which to base the development of credible methods for assessing the reliability of software targeted for flight-crucial applications. Two sets of software error-data experiments were conducted by different research groups. The results of the experiments were consistent: errors caused by different faults in a program occurred at widely varying rates; program failure rates exhibited a log-linear trend with respect to the number of faults corrected; some faults were found to interact in either concealing or revealing ways; and contiguous regions of the input space which cause a program to generate errors, called error crystals, were found and characterized for some faults. Collectively, these experiments have produced information on software failure which must be accounted for in software reliability modeling approaches.

Finelli, George B.↗
NASA NTRS1980

Results from the 10 March 1977 occultation by the Uranus system

Timings of occultation events observed at Perth, Australia during the appulse of Uranus to SAO 158687 are presented. In addition to pre- and post-appulse observations of the alpha ring, a search of the data confirms events by the '4', '5', and '6' rings on the pre-appulse side of Venus, and the '5' and beta rings on the post-appulse side. A table of other suspected events obtained from a statistical search of the data down to the same level of significance as the '4', '5', and '6' events is presented. A fairly strong 'event', so far unconfirmed, is noted near the 5:1 Miranda resonance orbit. Examination of the light curves at high time resolution indicates that the alpha ring was, during this aspect, about 10 km in radial extent and about 50% transparent.

Hubbard, W. B.↗
NASA NTRS2019

TESS Data Release Notes: Multi-Sector 14-16 DRN 23

TESS Data Release 23 consists of results from a transiting planet search conducted with the combined data from Sectors 14 through 16. Figure 1 shows the Right Ascension (RA) and Declination (Dec) of all two-minute targets, color-coded by the number of sectors for which each target was observed. Targets with new data in any of Sectors 14{16 that were observed in multiple sectors were subjected to a multi-sector planet search. The data are the same 2-minute cotrended light curves presented in previous single sector data releases. Table 1 provides basic information and data release numbers for the observations of each sector. The observations span an 80 day period.

Burke, Chris↗
NASA NTRS2009

NASA's Earth Observing Data and Information System

NASA's Earth Observing System Data and Information System (EOSDIS) has been a central component of NASA Earth observation program for over 10 years. It is one of the largest civilian science information system in the US, performing ingest, archive and distribution of over 3 terabytes of data per day much of which is from NASA s flagship missions Terra, Aqua and Aura. The system supports a variety of science disciplines including polar processes, land cover change, radiation budget, and most especially global climate change. The EOSDIS data centers, collocated with centers of science discipline expertise, archive and distribute standard data products produced by science investigator-led processing systems. Key to the success of EOSDIS is the concept of core versus community requirements. EOSDIS supports a core set of services to meet specific NASA needs and relies on community-developed services to meet specific user needs. EOSDIS offers a metadata registry, ECHO (Earth Observing System Clearinghouse), through which the scientific community can easily discover and exchange NASA s Earth science data and services. Users can search, manage, and access the contents of ECHO s registries (data and services) through user-developed and community-tailored interfaces or clients. The ECHO framework has become the primary access point for cross-Data Center search-and-order of EOSDIS and other Earth Science data holdings archived at the EOSDIS data centers. ECHO s Warehouse Inventory Search Tool (WIST) is the primary web-based client for discovering and ordering cross-discipline data from the EOSDIS data centers. The architecture of the EOSDIS provides a platform for the publication, discovery, understanding and access to NASA s Earth Observation resources and allows for easy integration of new datasets. The EOSDIS also has developed several methods for incorporating socioeconomic data into its data collection. Over the years, we have developed several methods for determining needs of the user community including use of the American Customer Satisfaction Index and a broad metrics program.

Mitchell, Andrew E.↗
NASA NTRS1993

Materials And Processes Technical Information System (MAPTIS) LDEF materials data base

A preliminary Long Duration Exposure Facility (LDEF) Materials Data Base was developed by the LDEF Materials Special Investigation Group (MSIG). The LDEF Materials Data Base is envisioned to eventually contain the wide variety and vast quantity of materials data generated from LDEF. The data is searchable by optical, thermal, and mechanical properties, exposure parameters (such as atomic oxygen flux) and author(s) or principal investigator(s). Tne LDEF Materials Data Base was incorporated into the Materials and Processes Technical Information System (MAPTIS). MAPTIS is a collection of materials data which has been computerized and is available to engineers, designers, and researchers in the aerospace community involved in the design and development of spacecraft and related hardware. The LDEF Materials Data Base is described and step-by-step example searches using the data base are included. Information on how to become an authorized user of the system is included.

Funk, Joan G.↗
NASA NTRS2003

Expert Seeker

Expert Seeker is a computer program of the knowledge-management-system (KMS) type that falls within the category of expertise-locator systems. The main goal of the KMS system implemented by Expert Seeker is to organize and distribute knowledge of who are the domain experts within and without a given institution, company, or other organization. The intent in developing this KMS was to enable the re-use of organizational knowledge and provide a methodology for querying existing information (including structured, semistructured, and unstructured information) in a way that could help identify organizational experts. More specifically, Expert Seeker was developed to make it possible, by use of an intranet, to do any or all of the following: Assist an employee in identifying who has the skills needed for specific projects and to determine whether the experts so identified are available. Assist managers in identifying employees who may need training opportunities. Assist managers in determining what expertise is lost when employees retire or otherwise leave. Facilitate the development of new ways of identifying opportunities for innovation and minimization of duplicated efforts. Assist employees in achieving competitive advantages through the application of knowledge-management concepts and related systems. Assist external organizations in requesting speakers for specific engagements or determining from whom they might be able to request help via electronic mail. Help foster an environment of collaboration for rapid development in today's environment, in which it is increasingly necessary to assemble teams of experts from government, universities, research laboratories, and industries, to quickly solve problems anytime, anywhere. Make experts more visible. Provide a central repository of information about employees, including information that, heretofore, has typically not been captured by the human-resources systems (e.g., information about past projects, patents, or hobbies). Unify myriad collections of data into Web-enabled repository that could easily be searched for relevant data.

Fernandez, Becerra↗
NASA NTRS2011

The SPASE Data Model for Heliophysics Data: Is it Working?

The Space Physics Archive Search and Extract (SPASE) Data Model was developed to provide a metadata standard for describing Heliophysics (Space and Solar Physics) data within that science discipline. The SPASE Data Model has matured over the many years of its creation and is presently represented by Version 2.2.1. Information about SPASE can be obtained from the website group.org. The Data Model defines terms and values as well as the relationships between them in order to describe the data resources in the Heliophysics data environment. This data environment is quite complex, consisting of Virtual Observatories, Resident Archives, Data Providers, Partnering Data Centers, Services, Final Archives, and a Deep Archive. SPASE is the metadata language standard intended to permeate the complexity and provide a common method of obtaining and understanding data. Is it working in this capacity? SPASE has been used to describe a wide range of data. Examples range from ground-based magnetometer data to interplanetary satellite measurements to space weather model results. Has it achieved the goal of making the data easier to find and use? To find data of interest it is necessary that all the data of importance be described using the SPASE Data Model. Within the part of the data community associated with NASA (supported through NASA funding) there are obligations to use SPASE and (0 describe the old and new data using the SPASE XML schema. Although this pan of the community is not near 100% compliance with the mandate, there is good progress being made and the goal should be reachable in the future. Outside of the NASA data community there is still work to be done to convince the international community that SPASE descriptions are w011h the cost of their generation. Some of these groups such as Cluster, HELlO, GAIA, NOAA/NGDe. CSSDP, VSTO, SuperMAG, and IUGONET have agreed to use SPASE. but there are still other groups of importance that need (0 be reached. It is also assumed that the terminology is sufficiently broad and the descriptions are sufficiently complete that researchers needing data of a specific type or from a specific period can find and acquire what they need. A valid SPASE description can be very brief or very thorough depending on the willingness of the author to spend the time necessary to make the description useful. There is evidence that users are finding what they need through the SPASE descriptions, and this standard is a big step forward in Heliophysics data location. Does SPASE make it easier to use the data once they are found,) Thorough descriptions of data using SPASE can describe the data down to the level of individual parameters and exactly how the data are organized and stored. Should the SPASE data descriptions be written in such a way that they can be automatically ingested and understood by software tools'? Heliophysics instruments are becoming morc versatile all the time and the complexity of the data makes it tedious and time consuming to write SPASE descriptions with this level of sophistication even with the improvement of the tools used to generate the descriptions. Is it better to just write human-readable descriptions of the data at the parameter level or to refer to references that provide this information? This is a debate that is presently taking place and software is being developed to test what is possible.

Thieman, James↗
NASA NTRS2022

Data-driven Expectations for Electromagnetic Counterpart Searches Based on LIGO/Virgo Public Alerts

Searches for electromagnetic counterparts of gravitational-wave signals have redoubled since the first detection in2017 of a binary neutron star merger with a gamma-ray burst, optical/infrared kilonova, and panchromatic after glow. Yet, one LIGO/Virgo observing run later, there has not yet been a second, secure identification of an electromagnetic counterpart. This is not surprising given that the localization uncertainties of events in LIGO and Virgo’s third observing run, O3, were much larger than predicted. We explain this by showing that improvements in data analysis that now allow LIGO/Virgo to detect weaker and hence more poorly localized events have increased the overall number of detections, of which well-localized, gold-plated events make up a smaller proportion overall. We present simulations of the next two LIGO/Virgo/KAGRA observing runs, O4 and O5, that are grounded in the statistics ofO3 public alerts. To illustrate the significant impact that the updated predictions can have, we study the follow-up strategy for the Zwicky Transient Facility. Realistic and timely forecasting of gravitational-wave localization accuracy is paramount given the large commitments of telescope time and the need to prioritize which events are followed up. We include a data release of our simulated localizations as a public proposal planning resource for astronomers

Polina Petrov↗
NASA NTRS1995

Exchange, interpretation, and database-search of ion mobility spectra supported by data format JCAMP-DX

To assist peak assignment in ion mobility spectrometry it is important to have quality reference data. The reference collection should be stored in a database system which is capable of being searched using spectral or substance information. We propose to build such a database customized for ion mobility spectra. To start off with it is important to quickly reach a critical mass of data in the collection. We wish to obtain as many spectra combined with their IMS parameters as possible. Spectra suppliers will be rewarded for their participation with access to the database. To make the data exchange between users and system administration possible, it is important to define a file format specially made for the requirements of ion mobility spectra. The format should be computer readable and flexible enough for extensive comments to be included. In this document we propose a data exchange format, and we would like you to give comments on it. For the international data exchange it is important, to have a standard data exchange format. We propose to base the definition of this format on the JCAMP-DX protocol, which was developed for the exchange of infrared spectra. This standard made by the Joint Committee on Atomic and Molecular Physical Data is of a flexible design. The aim of this paper is to adopt JCAMP-DX to the special requirements of ion mobility spectra.

Baumback, J. I.↗
NASA NTRS1985

A search in the COS-B data base for correlated time variability in regions containing objects of interest

As is well known, association of the gamma-ray sources with celestial objects is, in general, difficult on a pure positional basis, while correlated time variability could obviously provide such proof. This technique can be employed on regions of the gamma-ray sky containing interesting objects of known variability at some wavelength even in the absence of a recognized gamma-ray excess with the aim to extract a weak but predictable signal from the surrounding noise. This technique is applied here on a longer variability time scale, generally of the order of days. Photons coming from the sky regions centered on the various celestial objects considered were selected with energies 100 MeV and with arrival directions within an energy-dependent area of radius of approx 6 deg at 100 MeV. In order to construct a time profile of such photons, their arrival times were grouped in bins of dimensions defined by the available photons number and by the value of the period searched for.

Caraveo, P. A.↗
NASA NTRS2003

Search for Chemically Bound Water in the Surface Layer of Mars Based on HEND/Mars Odyssey Data

This study is emphasized on search for signatures of chemically bound water in surface layer of Mars based on data acquired by High Energy Neutron Detector (HEND) which is part of the Mars Odyssey Gamma Ray Spectrometer (GRS). Fluxes of epithermal (probe the upper 1-2 m) and fast (the upper 20-30 cm) neutrons, considered in this work, were measured since mid February till mid June 2002. First analysis of this data set with emphasis of chemically bound water was made. Early publications of the GRS results reported low neutron flux at high latitudes, interpreted as signature of ground water ice, and in two low latitude areas: Arabia and SW of Olympus Mons (SWOM), interpreted as 'geographic variations in the amount of chemically and/or physically bound H2O and or OH...'. It is clear that surface materials of Mars do contain chemically bound water, but its amounts are poorly known and its geographic distribution was not analyzed.

Basilevsky, A. T.↗