Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data Characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

The Pascal Mars Scout Mission

Except for Earth, Mars is the planet most amenable to surface-based climate studies. Its surface is accessible, and the kind of observations that are needed, such as meteorological measurements from a long-lived global network, are readily achievable. Weather controls the movement of dust, the exchange of water between the surface and atmosphere, and the cycling of CO2 between the poles. We know there is a weather signal, we know how to measure it, and we know how to interpret it. Pascal seeks to understand the long-term global behavior of near-surface weather systems on Mars, how they interact with its surface, and, therefore, how they control its climate system. To achieve this, Pascal delivers 18 Science Stations to the surface of the planet that operate for three Mars years (5.6 Earth years). The network has stations operating in the tropics, midlatitudes, and polar regions of both hemispheres. During entry, descent, and landing, each Pascal probe acquires deceleration measurements to determine thermal structure, and descent images to characterize local terrain. On the surface, each Science Station takes daily measurements of pressure, opacity, temperature, wind speed, and water vapor concentration and monthly panoramic images of the landing environment. These data will characterize the planet's climate system and how atmosphere-surface interactions control it. The Pascal mission is named after 17th century French Scientist, Blaise Pascal, who pioneered measurements of atmospheric pressure. Pressure is the most critical measurement because it records the "heartbeat" of the planet's general circulation and climate system.

Haberle, R. M.↗

Initial performance improvements due to design modifications for the Pointing Control System on the Hubble Space Telescope

Shortly after Hubble Space Telescope was deployed on orbit it became apparent that the Pointing Control System was experiencing unexpectedly large disturbances during certain portions of the orbit. While these disturbances were most pronounced during transitions of the Earth's shadow, significant disruptions to the pointing occurred at other times in the orbit. Careful analysis of the flight data has lead to the conclusion that the disturbances are caused by a combination of rapid thermal deformations of the Solar Arrays together with striction-friction mechanisms within the array that randomly release stored thermal/mechanical energy. This paper describes the baseline pointing control system design and the flight data that characterized the effects of the extraneous disturbances. The paper goes on to describe the procedure for modifying the onboard controller to attenuate the disturbances to levels consistent with the science operations. Flight data demonstrating the improved performance are shown and are tabulated to compare performance prior to and after phase I of the redesign.

Nurre, G. S.↗

Mars Array Technology Experiment Developed to Test Solar Arrays on Mars

Solar arrays will be the power supply for future missions to the planet Mars, including landers, rovers, and eventually human missions to explore the Martian surface. Until Mars Pathfinder landed in July 1997, no solar array had been used on the surface. The MATE package is intended to measure the solar energy reaching the surface, characterize the Martian environment to gather the baseline information required for designing power systems for long-duration missions, and to quantify the performance and degradation of advanced solar cells on the Martian surface. To measure the properties of sunlight reaching the Martian surface, MATE incorporates two radiometers and a visible/NIR spectrometer. The radiometers consist of multiple thermocouple junctions using thin-film technology. These devices generate a voltage proportional to the solar intensity. One radiometer measures the global broadband solar intensity, including both the direct and scattered sunlight, with a field of view of approximately 130. The second radiometer incorporates a slit to measure the direct (unscattered) intensity radiation. The direct radiometer can only be read once per day, with the Sun passing over the slit. The spectrometer measures the global solar spectrum with two 256-element photodiode arrays, one Si sensitive in the visible range (300 to 1100 nm), and a second InGaAs sensitive to the near infrared (900 to 1700 nm). This range covers 86 percent of the total energy from the Sun, with approximately 5-nm resolution. Each photodiode array has its own fiber-optic feed and grating. Although the purpose of the MATE is to gather data useful in designing solar arrays for Mars surface power systems, the radiometer and spectrometer measurements are expected to also provide important scientific data for characterizing the properties of suspended atmospheric dust. In addition to measuring the solar environment of Mars, MATE will measure the performance of five different individual solar cell types and two different solar cell strings, to qualify advanced solar cell types for future Mars missions. The MATE instrument, designed for the Mars-2001 Surveyor Lander mission, contains a capable suite of sensors that will provide both scientific information as well as important engineering data on the operation of solar power systems on Mars. MATE will characterize the intensity and spectrum of the solar radiation on Mars and measure the performance of solar arrays in the Mars environment. MATE flight hardware was built and tested at the NASA Glenn Research Center and is ready for flight.

Landis, Geoffrey A.↗

Prediction of jet exhaust noise on airframe surfaces during flight

The behavior of pressure fluctuations measured on the airframe of a prototype high lift jet transport (YC-14) is presented. The data are characterized in terms of a particular jet exhaust flow field idealization, jet mixing noise, and exhaust shock noise. Generalized spectrum shapes and scaling relations for peak level and frequency of peak level are developed, and the frequency is found to depend on jet exhaust velocity and aircraft velocity. Comparisons are made with near-field engine exhaust noise of a conventional jet, and results suggest that the same two exhaust noises are important for both aircraft types. Surface fluctuating pressure data are assessed, and results suggest that the jet mixing and exhaust shock noise source characterizations for the YC-14 have useful applicability to conventionally configured jets.

Butzel, L. M.↗

Deep Space Network-Wide Portal Development: Planning Service Pilot Project

The Deep Space Network (DSN) is an international network of antennas that supports interplanetary spacecraft missions and radio and radar astronomy observations for the exploration of the solar system and the universe. DSN provides the vital two-way communications link that guides and controls planetary explorers, and brings back the images and new scientific information they collect. In an attempt to streamline operations and improve overall services provided by the Deep Space Network a DSN-wide portal is under development. The project is one step in a larger effort to centralize the data collected from current missions including user input parameters for spacecraft to be tracked. This information will be placed into a principal repository where all operations related to the DSN are stored. Furthermore, providing statistical characterization of data volumes will help identify technically feasible tracking opportunities and more precise mission planning by providing upfront scheduling proposals. Business intelligence tools are to be incorporated in the output to deliver data visualization.

project development↗

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗

Using Machine Learning to Infer Material Properties of Debris Fragments from X-ray Images in the DebriSat Project

The DebriSat project is a collaboration effort with the NASA Orbital Debris Program Office, the U.S. Space Force Space Systems Command Center, The Aerospace Corporation, and the University of Florida. To date, over 200,000 fragments from this ground-based, hypervelocity impact experiment have been collected, and processing is underway to determine their physical characteristics, such as material, shape, color, characteristic length, and average cross-sectional area. The x-ray process is primarily used to identify the location of the fragments and estimated size for extraction, so that these physical characteristics can be assessed. This paper proposes a machine learning-based approach to characterize materials from x-ray images of debris fragments embedded in soft-catch foam used in the DebriSat project. The novel methodology discussed in this paper will highlight the use of x-ray imagery data to characterize these fragments without extraction or a human-in-the-loop. Both supervised and unsupervised machine learning techniques are utilized with this approach to infer the physical parameters of the fragments embedded in the soft-catch foam panels used in the impact experiment based on x-ray images of the foam panels. Additionally, 3D reconstructions of the extracted fragments are created with images taken from two different angles using the structure from motion (SfM) method. The characteristic lengths and shape from the 3D reconstruction, alongside the physical characteristics of the debris, are used in the inference of the material type. To develop and test the approach, a dataset of x-ray images of debris fragments of varying sizes and materials is collected. Supervised learning methods such as convolutional neural networks (CNNs), support vector machines (SVM), decision trees, and random forest classifiers are used due to the high-dimensional feature spaces of the debris and nonlinear decision boundaries for material categorization. Given the limited pre-labeled data of embedded debris materials smaller than 10 mm, unsupervised machine learning techniques such as clustering algorithms and autoencoders are used, in addition to supervised learning methods. The clustering algorithms group similar fragments together based on their physical properties, and autoencoders reduce the dimensionality of the x ray images and extract relevant features. The performance of the proposed approach's is analyzed using a range of statistical methods, including confusion matrices, receiver operating characteristic curves, and precision-recall curves. The results are compared with those obtained using a baseline approach that relies on manual identification and classification of debris fragments. To evaluate the effectiveness of different machine learning methods, statistical tests such as t-tests, ANOVA, and cross-validation are performed, comparing the performance of CNNs, SVMs, clustering algorithms, and autoencoders. Additional analysis needs to be conducted to identify any sources of bias or variability that may affect the results, such as variations in imaging conditions or fragmentation patterns. Other topics explored are limitations, refinements, and the potential use of semi-supervised learning techniques, such as self-training to label unlabeled datasets and co-training using x-ray images taken from two different angles as two different models.

Saik Anam Siam↗

The Global Albedo of the Moon at 1064 nm from LOLA

The Lunar Orbiter Laser Altimeter (LOLA) measures the backscattered energy of the returning altimetric laser pulse at its wavelength of 1064 nm, and these data are used to map the reflectivity of the Moon at zero-phase angle with a photometrically uniform data set. Global maps have been produced at 4 pixels per degree (about 8 kilometers at the equator) and 2 kilometers resolution within 20 deg latitude of each pole. The zero-phase geometry is insensitive to lunar topography, so these data enable characterization of subtle variations in lunar albedo, even at high latitudes where such measurements are not possible with the Sun as the illumination source. The geometric albedo of the Moon at 1064 nm was estimated from these data with absolute calibration derived from the Kaguya Multiband Imager and extrapolated to visual wavelengths. The LOLA estimates are within 2 sigma of historical measurements of geometric albedo. No consistent latitude-dependent variations in reflectance are observed, suggesting that solar wind does not dominate space weathering processes that modify lunar reflectance. The average normal albedo of the Moon is found to be much higher than that of Mercury consistent with prior measurements, but the normal albedo of the lunar maria is similar to that of Mercury suggesting a similar abundance of space weathering products. Regions within permanent shadow in the polar regions are found to be more reflective than polar surfaces that are sometimes illuminated. Limiting analysis to data with slopes less than 10 deg eliminates variations in reflectance due to mass wasting and shows a similar increased reflectivity within permanent polar shadow. Steep slopes within permanent shadow are also more reflective than similar slopes that experience at least some illumination. Water frost and a reduction in effectiveness of space weathering are offered as possible explanations for the increased reflectivity of permanent shadow; porosity is largely ruled out as the sole explanation. The south polar crater Shackleton is found to be among the most reflective craters in its size range globally but is not the most reflective, so mass wasting cannot be ruled out as a cause for the crater's anomalous reflectance. Models of the abundance of ice needed to account for the reflectance anomaly range from 3 to 14% by weight or area depending on assumptions regarding the effects of porosity on reflectance and whether ice is present as patches or is well mixed in the regolith. If differences in nanophase iron abundances are responsible for the anomaly, the permanently shadowed regions have between 50 and 80% the abundance of nanophase iron in mature lunar soil.

PSR↗

High Frequency Acoustic Response Characterization and Analysis of the Deep Throttling Common Extensible Cryogenic Engine

The Common Extensive Cryogenic Engine program demonstrated the operation of a deep throttling engine design. The program, spanning five years from August 2005 to July 2010, funded testing through four separate engine demonstration test series. Along with successful completion of multiple objectives, a discrete response of approximately 4000 Hz was discovered and explored throughout the program. The typical low-amplitude acoustic response was evident in the chamber measurement through almost every operating condition; however, at certain off-nominal operating conditions, the response became discrete with higher amplitude. This paper summarizes the data reduction, characterization, and analysis of the 4,000 Hz response for the entire program duration, using the large amount of data collected. Upon first encountering the response, new objectives and instrumentation were incorporated in future test series to specifically collect 4,000 Hz data. The 4,000 Hz response was identified as being related to the first tangential acoustic mode by means of frequency estimation and spatial decomposition. The latter approach showed that the effective node line of the mode was aligned with the manifold propellant inlets with standing waves and quasi-standing waves present at various times. Contour maps that contain instantaneous frequency and amplitude trackings of the response were generated as a significant improvement to historical manual approaches of data reduction presentation. Signal analysis and dynamic data reduction also uncovered several other features of the response including a stable limit cycle, the progressive engagement of subsequent harmonics, the U-shaped time history, an intermittent response near the test-based neutral stability region, other acoustic modes, and indications of modulation with a separate subsynchronous response. Although no engine damage related to the acoustic mode was noted, the peak-to-peak fluctuating pressure amplitude achieved 12.1% of the mean chamber pressure at its highest. The identification of this response in terms of an instability is also discussed.

Casiano, M. J.↗

Determination of rainfall and condensational heating in the South Pacific convergence zone during FGGE SOP-1

The role of cloud related diabatic processes in maintaining the structure of the South Pacific Convergence Zone is discussed. The method chosen to evaluate the condensational heating is a diagnostic cumulus mass flux technique which uses GOES digital IR data to characterize the cloud population. This method requires as input an estimate of time/area mean rainfall rate over the area in question. Since direct observation of rainfall in the South Pacific is not feasible, a technique using GOES IR data is being developed to estimate rainfall amounts for a 2.5 degree grid at 12h intervals.

Robertson, F. R.↗

Far-Infrared Spectroscopy of Planetary Nebulae with the KAO

We present new far-infrared line observations of the planetary nebulae (PNs) NGC 7027, NGC 7009, and NGC 6210 obtained with the Kuiper Airborne Observatory (KAO). The bulk of our data are for NGC 7027 and NGC 7009, including [Ne(V)] 24 micrometers, [O(IV)] 26 micrometers, [O(III)] (52, 88) micrometers, and [N(III)] 57 micrometers. Our data for [O(III)] (52, 88) and [N(III)] 57 in NGC 7027 represent the first measurements of these lines in this source. The large [O(III)] 52/88-micrometer flux ratio implies an electron density (cubic cm) of log N(sub e)[O(III)] = 4.19, the largest Ne ever inferred from these lines. We derive N(++)/O(++) = 0.394 +/- 0.062 for NGC 7027 and 0.179 +/- 0.043 for NGC 6210. We are able to infer the O(+3)/O(++) ionic ratio from our data. As gauged by this ionic ratio, NGC 7027 is substantially higher ionization than is NGC 7009 - consistent with our observation that the former produces copious [Ne(V)] emission while the latter does not. These data help characterize the stellar ionizing radiation field. From our [O(IV)] and [O(III)] fluxes, we are able to show that O(++) is by far the dominant oxygen ion in NGC 7009. As a result, the O/H abundance inferred using these data tends to corroborate the value found from UV/optical, collisionally excited lines. We determined accurate rest wavelengths for the [Ne(V)] 2s(2)2p(2)P(sub 1) to 2s(2)2p(2)3P(sub 0) (lambda(sub rest) = 24.316 +/- 0.008 micrometers) and [O(IV)] 2s(2)2p(2)P(sup 0, sub 3/2) to 2s(2)2p(2)P(sup 0, sub 1/2) (lambda(sub rest) = 25.887 +/- 0.007 micrometers) transitions from observations of one or both of the bright PNs NGC 7027 and NGC 7009. Our [O(IV)] value, to the best of our knowledge, is the most accurate direct determination of this lambda(sub rest). These new KAO data will be beneficial for comparison with ISO observations of these PNs.

Rubin, Robert H.↗

Analysis of One-Way Laser Ranging Data to LRO, Time Transfer and Clock Characterization

We processed and analyzed one-way laser ranging data from International Laser Ranging Service ground stations to NASA's Lunar Reconnaissance Orbiter (LRO), obtained from June 13, 2009 until September 30, 2014. We pair and analyze the one-way range observables from station laser fire and spacecraft laser arrival times by using nominal LRO orbit models based on the GRAIL gravity field. We apply corrections for instrument range walk, as well as for atmospheric and relativistic effects. In total we derived a tracking data volume of approximately 3000 hours featuring 64 million Full Rate and 1.5 million Normal Point observations. From a statistical analysis of the dataset we evaluate the experiment and the ground station performance. We observe a laser ranging measurement precision of 12.3 centimeters in case of the Full Rate data which surpasses the LOLA (Lunar Orbiting Laser Altimeter) timestamp precision of 15 centimeters. The averaging to Normal Point data further reduces the measurement precision to 5.6 centimeters. We characterized the LRO clock with fits throughout the mission time and estimated the rate to 6.9 times10 (sup -8), the aging to 1.6 times 10 (sup -12) per day and the change of aging to 2.3 times 10 (sup -14) per day squared over all mission phases. The fits also provide referencing of onboard time to the TDB (Barycentric Dynamical Time) time scale at a precision of 166 nanoseconds over two and 256 nanoseconds over all mission phases, representing ground to space time transfer. Furthermore we measure ground station clock differences from the fits as well as from simultaneous passes which we use for ground to ground time transfer from common view observations. We observed relative offsets ranging from 33 to 560 nanoseconds and relative rates ranging from 2 times 10 (sup -13) to 6 times 10 (sup -12) between the ground station clocks during selected mission phases. We study the results from the different methods and discuss their applicability for time transfer.

Bauer, S.↗

Calibration and evaluation of AVIRIS data: Cripple Creek in October 1987

Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) data were obtained over Cripple Creek and Canon City Colorado on October 19, 1987 at local noon. Multiple ground calibration sites were measured within both areas with a field spectrometer and samples were returned to the laboratory for more detailed spectral characterization. The data were used to calibrate the AVIRIS data to ground reflectance. Once calibrated, selected spectra in the image were extracted and examined, and the signal to noise performance was computed. Images of band depth selected to be diagnostic of the presence of certain minerals and vegetation were computed. The AVIRIS data were extremely noisy, but images showing the presence of goethite, kaolinite and lodgepole pine trees agree with ground checks of the area.

Clark, Roger N.↗

BOREAS TE-1 SSA-Fen Soil Profile Nutrient Data

The BOREAS TE-1 team collected various data to characterize the soil-plant systems in the BOREAS SSA. Particular emphasis was placed on nutrient biochemistry, the stores and transfers of organic carbon, and how the characteristics were related to measured methane fluxes. The overall traniect in the Prince Albert National Park (Saskatchewan, Canada) included the major plant communities and related soils that occurred in that section of the boreal forest. Soil physical, chemical, and biological measurements along the transect were used to characterize the static environment, which allowed them to be related to methane fluxes. Chamber techniques were used to provide a measure of methane production/uptake. Chamber measurements coupled with flask sampling were used to determine the seasonality of methane fluxes. This particular data set contains soil profile measurements of various nutrients at the SSA-Fen site. The data were collected from 23-May to 21-Oct- 1994. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Papagno, Andrea↗

BOREAS TE-1 CO2 and CH4 Flux Data Over the SSA-OBS Site

The BOREAS TE-1 team collected various data to characterize the soil-plant systems in the BOREAS SSA. Particular emphasis was placed on nutrient biochemistry, the stores and transfers of organic carbon, and how the characteristics were related to measured methane fluxes. The overall transect in the Prince Albert National Park (Saskatchewan, Canada) included the major plant communities and related soils that occurred in that section of the boreal forest. Soil physical, chemical, and biological measurements along the transect were used to characterize the static environment, which allowed them to be related to methane fluxes. Chamber techniques were used to provide a measure of methane production/uptake. Chamber measurements coupled with flask sampling were used to determine the seasonality of methane fluxes. This particular data set contains carbon dioxide and methane flux values from the SSA-OBS site. The data were collected from 09-Jun to 04-Sep-1994. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Anderson, Darwin↗

BOREAS TE-1 CH4 Flux Data Over The SSA-OA

The BOREAS TE-1 team collected various data to characterize the soil-plant systems in the BOREAS SSA. Particular emphasis was placed on nutrient biochemistry, the stores and transfers of organic carbon, and how the characteristics were related to measured methane fluxes. The overall transect in the Prince Albert National Park (Saskatchewan, Canada) included the major plant communities and related soils that occurred in that section of the boreal forest. Soil physical, chemical, and biological measurements along the transect were used to characterize the static environment, which allowed them to be related to methane fluxes. Chamber techniques were used to provide a measure of methane production/uptake. Chamber measurements coupled with flask sampling were used to determine the seasonality of methane fluxes. This particular data set contains methane flux and soil profile methane concentration values from the SSA-OA site. The data were collected from 29-May to 17-Sep-1994. The data are stored in tabular ASCII files. The data files are available on a CD-ROM (see document number 20010000884), or from the Oak Ridge National Laboratory (ORNL) Distributed Active Archive Center (DAAC).

Anderson, Darwin↗

High Spatial Resolution Thermal Infrared Remote Sensing Data for Analysis of the Atlanta, Georgia, Urban Heat Island Effect and Its Impacts on the Environment

The twenty-first century is the first "urban century" according to the United Nations Development Program. The focus of cities reflects awareness of the growing percentage of the world's population that lives in urban areas. In environmental terms, cities are the original producers of many of the global problems related to waste disposal, air and water pollution, and associated environmental and ecological challenges. Expansion of cities, both in population and areal extent, is a relentless process. In 2000, approximately 3 billion people representing about 40% of the global population, resided in urban areas. Urban population will continue to rise substantially over the next several decades according to UN estimates, and most of this growth will Occur in developing countries. The UN estimates that by 2025, 60% of the world's population will live in urban areas. As a consequence, the number of"megacities" (those cities with populations of 10 million inhabitants or more) will increase by 100 by 2025. Thus, there is a critical need to understand urban areas and what their impacts are on environmental, ecological and hydrologic resources, as well as on the local, regional, and even global climate. One of the more egregious side effects of urbanization is the increase in surface and air temperatures that lead to deterioration in air quality. In the United States, under the more stringent air quality guidelines established by the U.S. Environmental Protection Agency in 1997, nearly 300 counties in 34 states will not meet these new air quality standards for ground level ozone. Mitigation of the urban heat island (UHI) effect is actively being evaluated as a possible way to reduce ground ozone levels in cities and assist states in improving air quality. Foremost in the analysis of how the UHI affects air quality and other environmental factors is the use of remote sensing technology and data to characterize urban land covers in sufficient detail to quantifiably measure the impact of increased urban heating on air quality. The urban landscape impacts surface thermal energy exchanges that determine development of the UHI. This paper will illustrate how we are using high spatial remote sensing data collected over the Atlanta, Georgia metropolitan area in conjunction with other geographic information, to perform a detailed urban land cover classification and to determine the contribution of these land covers to the urban heat island effect. Also, the spatial arrangement of the land covers and the impact on urban heating from these selected patterns of development are evaluated. Additionally, this paper will show how these data are being used as inputs to improve air quality modeling for Atlanta, including potential benefits from UHI mitigation.

Quattrochi, Dale A.↗

Microstructure-Sensitive Investigation of Fracture Using Acoustic Emission Coupled With Electron Microscopy

A novel technique using Scanning Electron Microscopy (SEM) in conjunction with Acoustic Emission (AE) monitoring is proposed to investigate microstructure-sensitive fatigue and fracture of metals. The coupling between quasi in situ microscopy with actual in situ nondestructive evaluation falls into the ICME framework and the idea of quantitative data-driven characterization of material behavior. To validate the use of AE monitoring inside the SEM chamber, Aluminum 2024-B sharp notch specimen were tested both inside and outside the microscope using a small scale mechanical testing device. Subsequently, the same type of specimen was tested inside the SEM chamber. Load data were correlated with both AE information and observations of microcracks around grain boundaries as well as secondary cracks, voids, and slip bands. The preliminary results are in excellent agreement with similar findings at the mesoscale. Extensions of the application of this novel technique are discussed.

Wisner, Brian↗