Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DOSAGE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Equilibrium, kinetic and thermodynamic studies on the adsorption of phenol onto graphene

Graphical abstract: The effect of temperature on phenol adsorbed by graphene shows that the equilibrium adsorption capacity of phenol increases with the increase in temperature from 285 to 333 K. Increasing adsorption capacities with temperature indicates that the adsorption of phenol is controlled by an endothermic reaction. Highlights: ► The graphene has high phenol adsorption capacity. ► The graphene has a high specific surface area of 305 m{sup 2}/g. ► The adsorption capacity is high at acidic pH range. ► The graphene has rapid phenol adsorption rate. ► Phenol adsorption is a spontaneous and endothermic process. -- Abstract: Graphene, a new member of carbon family, has been prepared, characterized and used as adsorbent to remove phenol from aqueous solution. The effect parameters including pH, dosage, contact time, and temperature on the adsorption properties of phenol onto graphene were investigated. The results showed that the maximum adsorption capacity can reach 28.26 mg/g at the conditions of initial phenol concentration of 50 mg/L, pH 6.3 and 285 K. Adsorption data were well described by both Freundlich and Langmuir models. The kinetic study illustrated that the adsorption of phenol onto graphene fit the pseudo second-order model. The thermodynamic parameters indicated that the adsorption of phenol onto graphene was endothermic and spontaneous.

36 MATERIALS SCIENCE↗

Mixed-solvothermal synthesis and characterization of triangular prism-like Y{sub 2}O{sub 3}

Highlights: ► Y{sub 4}O(OH){sub 9}(NO{sub 3}) microprisms were prepared. ► Use triethylene tetramine as precipitator. ► Y{sub 2}O{sub 3} microprisms were obtained after thermal treatment of Y{sub 4}O(OH){sub 9}(NO{sub 3}) microprisms. -- Abstract: In this paper, it was demonstrated that Y{sub 2}O{sub 3} microprisms could be prepared by a mixed-solvothermal method with triethylene tetramine as precipitator and sequent heat treatment process. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopic (TEM) and high-resolution transmission electron microscopic (HRTEM) were used to characterize the products. The height of the Y{sub 4}O(OH){sub 9}(NO{sub 3}) microprisms is about 1.2 μm and the length of the side of the bottom surface is about 0.6 μm. It was found that the composition of solvent, dosage of triethylene tetramine, reaction time and reaction temperature had great effect on the morphologies of the final products. The as-obtained product via solvothermal process, monoclinic yttrium oxide hydroxide nitrate, Y{sub 4}O(OH){sub 9}(NO{sub 3}), could convert to Y{sub 2}O{sub 3} with the same morphology after annealing at high temperatures. Eu{sup 3+} doped Y{sub 2}O{sub 3} microprisms were also prepared and their photoluminescence (PL) properties were investigated. This method may be applied to prepare other rare earth oxides with complex structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis and characterization of F-N-W-codoped TiO{sub 2} photocatalyst with enhanced visible light response

Graphical abstract: Display Omitted Highlights: ► Anatase F-N-W-codoped TiO{sub 2} was prepared by a sol–gel-hydrothermal method. ► Under visible illumination, carbon removal rate of RB reached 94% using F-7NW-TiO{sub 2}. ► F, N and W dopants narrowed band gap and lowed charge pairs recombination rate. ► There were W{sub x}Ti{sub 1−x}O{sub 2}, O-Ti-N and valence variation of W ions existing. -- Abstract: Anatase F-N-W-codoped TiO{sub 2} photocatalyst was successfully prepared by a method combining sol–gel with hydrothermal treatment. Effects of F, N and W ion dosage concentration on the crystallinity, morphology, grain size and chemical status of the photocatalyst were investigated. The results showed that the F-7NW-TiO{sub 2} photocatalyst composed of uniform ellipsoidal particles around 20 nm in length and 10 nm in width, and the photocatalyst displayed enhanced visible-light absorption and photocatalytic activities. Using the photocatalyst and under visible irradiation for 1.5 h, the decoloration percent of RB and carbon removal rate were about 98% and 94% respectively, which were much higher than that of commercial P25, TiO{sub 2}, N-W-TiO{sub 2} and F-TiO{sub 2}. The high visible-light photocatalytic activity of F-7NW-TiO{sub 2} might result from narrowing the band gap and lowing charge pairs recombination rate for the W{sub x}Ti{sub 1−x}O{sub 2}, O-Ti-N and valence variation of W ions existing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis of nickel–zinc ferrite magnetic nanoparticle and dye degradation using photocatalytic ozonation

Graphical abstract: Display Omitted Highlights: ► Nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and characterized. ► Dye degradation by photocatalytic ozonation using NZFMN was studied. ► Formate, acetate and oxalate were detected as dominant dye degradation aliphatic intermediates. ► Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. ► NZFMN was an effective magnetic nanocatalyst to degrade dyes. -- Abstract: In this paper, nickel–zinc ferrite magnetic nanoparticle (NZFMN) was synthesized and its dye degradation ability using photocatalytic ozonation was investigated. The NZFMN was characterized by X-ray diffraction (XRD), scanning electron microscopic (SEM), Fourier transforms infrared (FTIR) and alternative gradient force magnetometer (AGFM). Reactive Red 198 (RR198) and Direct Green 6 (DG6) were used as dye models. UV–vis and ion chromatography (IC) analyses were employed to study dye degradation. The effects of operational parameters on decolorization such as NZFMN dosage, dye concentration, salt and pH were studied. RR198 and DG6 were completely decolorized (100%) by photocatalytic ozonation using NZFMN. Formate, acetate and oxalate anions were detected as dominant aliphatic intermediates. Nitrate, sulfate and chloride ions were detected as mineralization products of dyes. Results showed that the photocatalytic ozonation using NZFMN was a very effective method for dye degradation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Fe{sub 3}O{sub 4}@graphene oxide composite: A magnetically separable and efficient catalyst for the reduction of nitroarenes

Highlights: ► The Fe{sub 3}O{sub 4}@GO composite was prepared by a facile co-precipitation method. ► Fe{sub 3}O{sub 4} nanoparticles are well distributed on GO nanosheets. ► Fe{sub 3}O{sub 4}@GO was for the first time explored as a catalyst to reduce nitroarenes. ► Fe{sub 3}O{sub 4}@GO exhibits higher catalytic activity. ► The composite catalyst is easily recycled due to its magnetic separability. - Abstract: We reported a facile co-precipitation method to prepare a highly active Fe{sub 3}O{sub 4}@graphene oxide (Fe{sub 3}O{sub 4}@GO) composite catalyst, which was fully characterized by means of X-ray diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, transmission electron microscopy (TEM) and N{sub 2} adsorption–desorption measurements. The results demonstrated that the Fe{sub 3}O{sub 4} nanoparticles (Fe{sub 3}O{sub 4} NPs) with a small diameter of around 12 nm were densely and evenly deposited on the graphene oxide (GO) sheets. The as-prepared Fe{sub 3}O{sub 4}@GO composite was explored as a catalyst to reduce a series of nitroarenes for the first time, which exhibited a great activity with a turnover frequency (TOF) of 3.63 min{sup −1}, forty five times that of the commercial Fe{sub 3}O{sub 4} NPs. The dosages of catalyst and hydrazine hydrate are both less than those reported. Furthermore, the composite catalyst can be easily recovered due to its magnetic separability and high stability.

36 MATERIALS SCIENCE↗

Fabrication of nano Delafossite LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} as the new adsorbent in efficient removal of reactive blue 5 from aqueous solutions

Highlights: ► Fabrication of nano Delafossite LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} by sol–gel method. ► Kinetic study of the adsorption properties. ► Removal of reactive blue 5 (RB5) as a reactive dye by the prepared new nanocatalyst. - Abstract: In this paper, nanoparticles of delafossite-type LiCo{sub 0.5}Fe{sub 0.5}O{sub 2} were prepared by sol–gel method in the presence of maleic acid as a chelating agent. The nanoparticles were characterized using differential thermal analysis, X-ray powder diffraction, Fourier infrared spectroscopy, transmission electron microscope, scanning electron microscopy and scanning tunneling microscopy. The nanoparticles showed the excellent adsorption properties towards reactive dye, reactive blue 5 (RB5). The adsorption studies were carried out at different pH values, various adsorbent dosages and contact time in a batch experiments. The kinetic studies indicate that the removal process obeys the second-order kinetic equation. Also, the isotherm evaluations reveal that the adsorption of RB5 by the nanoparticles follows the Freundlich model.

36 MATERIALS SCIENCE↗

Zinc ferrite nanoparticle as a magnetic catalyst: Synthesis and dye degradation

Graphical abstract: Photocatalytic degradation of Reactive Red 198 and Reactive Red 120 by the synthesized zinc ferrite nanoparticle. - Highlights: • Magnetic zinc ferrite nanoparticle was synthesized and characterized. • Photocatalytic dye degradation by magnetic nanoparticle was studied. • Formate, acetate and oxalate were detected as dominant dye degradation aliphatic intermediates. • Nitrate and sulfate ions were detected as mineralization products of dyes. • Zinc ferrite nanoparticle was an effective magnetic photocatalyst to degrade dyes. - Abstract: In this paper, magnetic zinc ferrite (ZnFe{sub 2}O{sub 4}) nanoparticle was synthesized and its photocatalytic dye degradation ability from colored wastewater was studied. Reactive Red 198 (RR198) and Reactive Red 120 (RR120) were used as model dyes. The characteristics of ZnFe{sub 2}O{sub 4} were investigated using Fourier transform infrared (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM). Photocatalytic dye degradation by ZnFe{sub 2}O{sub 4} was studied by UV–vis spectrophotometer and ion chromatography (IC). The effects of ZnFe{sub 2}O{sub 4} dosage, initial dye concentration and salt on dye degradation were evaluated. Formate, acetate and oxalate anions were detected as dominant aliphatic intermediate. Inorganic anions (nitrate and sulfate anions) were detected as dye mineralization products. The results indicated that ZnFe{sub 2}O{sub 4} could be used as a magnetic photocatalyst to degrade dyes from colored wastewater.

36 MATERIALS SCIENCE↗

Construction of CQDs-Bi{sub 20}TiO{sub 32}/PAN electrospun fiber membranes and their photocatalytic activity for isoproturon degradation under visible light

Highlights: • The flexible fiber membranes were prepared by coaxial electrospinning technique. • CQDs-Bi{sub 20}TiO{sub 32} photocatalyst was uniformly fixed on the surfaces of PAN fibers. • The fiber membranes had high photocatalytic activity for degradation of isoproturon. • The composite fiber membranes exhibited good recyclability. - Abstract: The CQDs-Bi{sub 20}TiO{sub 32} photocatalysts exhibited high visible-light responsive photocatalytic activity. To achieve the cyclic utilization of CQDs-Bi{sub 20}TiO{sub 32}, the novel flexible CQDs-Bi{sub 20}TiO{sub 32}/PAN fiber membranes were prepared by a simple coaxial electrospinning technique. It was found that the CQDs-Bi{sub 20}TiO{sub 32} photocatalyst could be firmly and uniformly fixed on the surfaces of electrospun fibers and the composite fiber membranes possessed the hierarchical macro- and mesoporous structure. The loaded CQDs-Bi{sub 20}TiO{sub 32} endowed the composite fiber with an obvious photocatalytic activity for the degradation of the herbicide isoproturon under visible light irradiation. Among these samples, S3 at photocatalyst dosage 15 w/v% had the highest degradation efficiency for isoproturon. Meanwhile, the core-shell structured inorganic-organic hybrid fiber membranes have a significant advantage in the recyclability for photocatalyts. The flexible CQDs-Bi{sub 20}TiO{sub 32}/PAN electrospun fiber membranes would have potential applications in efficient removal of organic contaminants.

36 MATERIALS SCIENCE↗

Highly efficient deep desulfurization of fuels by meso/macroporous H3PW12O40/TiO2 at room temperature

Highlights: • A new kind of meso/macroporous structured HPW/TiO{sub 2} catalyst was prepared by monodispersed polystyrene spheres and quaternary ammonium bromide. • Quaternary ammonium bromide with longer alkyl chains length (STAB) was found to be the best mesostructure-directing agent in the synthesis of meso/macroporous HPW/TiO{sub 2} catalyst. • The influence of dosage of macroporous templates (monodispersed polystyrene spheres) and alkyl chains length of quaternary ammonium bromide on the textural of meso/macroporous HPW/TiO{sub 2} catalyst were investigated. • With proper PS spheres and quaternary ammonium bromide usage, disordered macropores arranged periodicity and led relatively larger pore size and pore volume. • The meso/macroporous HPW/TiO{sub 2} materials exhibited enhanced excellent desulfurization performance of thiophenic sulfur in model fuel than other samples. Dibenzothiophene can be completely removed within 2 h at 30 °C. - Abstract: This paper described the synthesis of meso/macroporous phosphotungstic acid (HPW) /TiO{sub 2} catalyst with quaternary ammonium bromide and monodispersed polystyrene spheres (PS) as dual-template. The synthetic parameters, such as concentration of the templates and the alky chain length of quaternary ammonium bromide was studied carefully and optimized to generate catalyst with regulated porous features. The chemical properties of the catalyst was also investigated, X-ray diffraction (XRD) and Fourier transform infrared (FT-IR) measurements confirmed the Keggin-type HPW were highly dispersed on the TiO{sub 2} framework. The optimal meso/macroporous HPW/TiO{sub 2} catalyst exhibited excellent catalytic activity in the oxidation of refractory sulphur compounds such as benzothiophene (BT), dibenzothiophene (DBT), and 4,6-dimethyldibenzothiophene (4,6-DMDBT). DBT was removed within 2 h at 30 °C under selected reaction conditions and the apparent activation energy for DBT oxidation was calculated to be 45.7 kJ/mol. The high ODS reaction rate of catalyst could be attributed to the combination of unique meso/macroporous architecture allowing for efficient mass transport of reactants and products in pore channel and its high surface area, large mesoporous size, and pore volume enabling sufficient exposure of catalytic active sites. Moreover, the meso/macroporous HPW/TiO{sub 2} catalyst also exhibited excellent reusability with no obviously degradation even after eight cycles.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

A new synergetic mesoporous silica combined to CdSe-graphene nanocomposite for dye degradation and hydrogen evolution in visible light

Highlights: • The SiO{sub 2}/CdSe-graphene material is capable of photocatalytic degradation of different organic dyes under visible light irradiation. • The large surface area of silica was provided a large response surface with a large quantity of reactions centers that needed H{sub 2} generation. • High H{sub 2} generation can be attributed to the effective charge carrier system and a good charge transferability of graphene decorated with SiO{sub 2}, and CdSe semiconductors. • The ternary catalyst holds promise to become a new potential photocatalyst for developing efficient hetero-system for hydrogen production. - Abstract: To promote outstanding qualities of mesoporous silica and enhance photocatalytic activity of CdSe and silica nanoparticles, the combination of SiO{sub 2} nanoparticles from silica precursor with CdSe-graphene nanoparticles was processed under catering of cetyltrimethylammonium bromide (CTAB) and sodium lauryl sulfate (SLS) as the surfactant template. The as-synthesized sample exhibited highly efficient photocatalytic effects for treatment of MB and RBB organic dye solutions at optimum conditions for this study, including pH and catalyst dosage, were at pH 11 for MB dye solution case and pH 3 for RBB dye solution case and initial amount was 0.05 g catalyst for both cases. Besides, hydrogen generation of SiO{sub 2}/CdSe-graphene was markedly higher than that of binary CdSe-graphene nanocomposite under ambient conditions with/without methanol 20% sacrificing reagents at room temperature. The SiO{sub 2}/CdSe-graphene nanocomposite is capable of photocatalytic degradation of different organic dyes under visible light irradiation as well as for developing efficient hetero-system for hydrogen production.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Silver-loaded ZnO/ZnFe2O4 mesoporous hollow spheres with enhanced photocatalytic activity for 2,4-dichlorophenol degradation under visible light irradiation

Highlights: • Visible-light-driven ZnO/ZnFe{sub 2}O{sub 4}/Ag spheres were successfully synthesized. • ZnO/ZnFe{sub 2}O{sub 4}/Ag spheres have unique mesoporous hollow structures. • ZnO/ZnFe{sub 2}O{sub 4}/Ag spheres exhibit excellent photodegradation of 2,4-dichlorophenol. • ZnO/ZnFe{sub 2}O{sub 4}/Ag spheres are reusable with the aid of a magnet. - Abstract: Silver-loaded ZnO/ZnFe{sub 2}O{sub 4} (ZnO/ZnFe{sub 2}O{sub 4}/Ag) mesoporous hollow spheres were synthesized via a layer-by-layer technique followed chemical reduction method. The structures and morphologies of the as-prepared catalysts were characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope and N{sub 2} adsorption/desorption porosimetry. The photodegradation activities of ZnO/ZnFe{sub 2}O{sub 4}/Ag mesoporous hollow spheres toward 2,4-dichlorophenol were investigated under UV and visible light irradiation. The experimental results indicated that our mesoporous hollow spheres exhibited much higher photodegradation activities than P25 for the loading of silver particles, the bands matching and the unique structures. There exists an optimal loading dosage of silver particles. Too high or too low loading will reduce the photodegradation activities of ZnO/ZnFe{sub 2}O{sub 4}/Ag mesoporous hollow spheres. The possible mechanism behind was proposed. Noteworthily, the ZnO/ZnFe{sub 2}O{sub 4}/Ag mesoporous hollow spheres are reusable with the aid of a magnet, which is cost effective.

36 MATERIALS SCIENCE↗

Tissue Heterogeneity in IMRT Dose Calculation for Lung Cancer

The aim of this study was to evaluate the differences in accuracy of dose calculation between 3 commonly used algorithms, the Pencil Beam algorithm (PB), the Anisotropic Analytical Algorithm (AAA), and the Collapsed Cone Convolution Superposition (CCCS) for intensity-modulated radiation therapy (IMRT). The 2D dose distributions obtained with the 3 algorithms were compared on each CT slice pixel by pixel, using the MATLAB code (The MathWorks, Natick, MA) and the agreement was assessed with the {gamma} function. The effect of the differences on dose-volume histograms (DVHs), tumor control, and normal tissue complication probability (TCP and NTCP) were also evaluated, and its significance was quantified by using a nonparametric test. In general PB generates regions of over-dosage both in the lung and in the tumor area. These differences are not always in DVH of the lung, although the Wilcoxon test indicated significant differences in 2 of 4 patients. Disagreement in the lung region was also found when the {Gamma} analysis was performed. The effect on TCP is less important than for NTCP because of the slope of the curve at the level of the dose of interest. The effect of dose calculation inaccuracy is patient-dependent and strongly related to beam geometry and to the localization of the tumor. When multiple intensity-modulated beams are used, the effect of the presence of the heterogeneity on dose distribution may not always be easily predictable.

61 RADIATION PROTECTION AND DOSIMETRY↗

Feasibility of an online adaptive replanning method for cranial frameless intensity-modulated radiosurgery

To introduce an approach for online adaptive replanning (i.e., dose-guided radiosurgery) in frameless stereotactic radiosurgery, when a 6-dimensional (6D) robotic couch is not available in the linear accelerator (linac). Cranial radiosurgical treatments are planned in our department using intensity-modulated technique. Patients are immobilized using thermoplastic mask. A cone-beam computed tomography (CBCT) scan is acquired after the initial laser-based patient setup (CBCT{sub setup}). The online adaptive replanning procedure we propose consists of a 6D registration-based mapping of the reference plan onto actual CBCT{sub setup}, followed by a reoptimization of the beam fluences (“6D plan”) to achieve similar dosage as originally was intended, while the patient is lying in the linac couch and the original beam arrangement is kept. The goodness of the online adaptive method proposed was retrospectively analyzed for 16 patients with 35 targets treated with CBCT-based frameless intensity modulated technique. Simulation of reference plan onto actual CBCT{sub setup}, according to the 4 degrees of freedom, supported by linac couch was also generated for each case (4D plan). Target coverage (D99%) and conformity index values of 6D and 4D plans were compared with the corresponding values of the reference plans. Although the 4D-based approach does not always assure the target coverage (D99% between 72% and 103%), the proposed online adaptive method gave a perfect coverage in all cases analyzed as well as a similar conformity index value as was planned. Dose-guided radiosurgery approach is effective to assure the dose coverage and conformity of an intracranial target volume, avoiding resetting the patient inside the mask in a “trial and error” way so as to remove the pitch and roll errors when a robotic table is not available.

61 RADIATION PROTECTION AND DOSIMETRY↗

Dosimetric feasibility of an “off-target isocenter” technique for cranial intensity-modulated radiosurgery

To evaluate the dosimetric effect of placing the isocenter away from the planning target volume (PTV) on intensity-modulated radiosurgery (IMRS) plans to treat brain lesions. A total of 15 patients who received cranial IMRS at our institution were randomly selected. Each patient was treated with an IMRS plan designed with the isocenter located at the target center (plan A). A second off-target isocenter plan (plan B) was generated for each case. In all the plans,100% of the prescription dose covered 99% of the target volume. The plans A and B were compared for the target dosage (conformity index [CI] and homogeneity index) and organs-at-risk (OAR) dose sparing. Peripheral dose falloff was compared by using the metrics volume of normal brain receiving more than 12-Gy dose (V12) and CI at the level of the 50% of the prescription dose (CI 50%). The values found for each metric (plan B vs plan A) were (mean ± standard deviation [SD]) as follows—CI: 1.28 ± 0.15 vs 1.28 ± 0.15, p = 0.978; homogeneity index (HI): 1.29 ± 0.14 vs 1.34 ± 0.17, p = 0.079; maximum dose to the brainstem: 2.95 ± 2.11 vs 2.89 ± 1.88 Gy, p = 0.813; maximum dose to the optical pathway: 2.65 ± 4.18 vs 2.44 ± 4.03 Gy, p = 0.195; and maximum dose to the eye lens: 0.33 ± 0.73 vs 0.33 ± 0.53 Gy, p = 0.970. The values of the peripheral dose falloff were (plan B vs plan A) as follows—V12: 5.98 ± 4.95 vs 6.06 ± 4.92 cm{sup 3}, p = 0.622, and CI 50%: 6.08 ± 2.77 vs 6.28 ± 3.01, p = 0.119. The off-target isocenter solution resulted in dosimetrically comparable plans as the center-target isocenter technique, by avoiding the risk of gantry-couch collision during the cone beam computed tomography (CBCT) acquisition.

61 RADIATION PROTECTION AND DOSIMETRY↗

Evaluation of the setup margins for cone beam computed tomography–guided cranial radiosurgery: A phantom study

The aim of this study is to evaluate the setup margins from the clinical target volume (CTV) to planning target volume (PTV) for cranial stereotactic radiosurgery (SRS) treatments guided by cone beam computed tomography (CBCT). We designed an end-to-end (E2E) test using a skull phantom with an embedded 6mm tungsten ball (target). A noncoplanar plan was computed (E2E plan) to irradiate the target. The CBCT-guided positioning of the skull phantom on the linac was performed. Megavoltage portal images were acquired after 15 independent deliveries of the E2E plan. The displacement 2-dimensional (2D) vector between the centers of the square field and the ball target on each portal image was used to quantify the isocenter accuracy. Geometrical margins on each patient's direction (left-right or LR, anterior-posterior or AP, superior-inferior or SI) were calculated. Dosimetric validation of the margins was performed in 5 real SRS cases: 3-dimesional (3D) isocenter deviations were mimicked, and changes in CTV dose coverage and organs-at-risk (OARs) dosage were analyzed. The CTV-PTV margins of 1.1 mm in LR direction, and 0.7 mm in AP and SI directions were derived from the E2E tests. The dosimetric analysis revealed that a 1-mm uniform margin was sufficient to ensure the CTV dose coverage, without compromising the OAR dose tolerances. The effect of isocenter uncertainty has been estimated to be 1 mm in our CBCT-guided SRS approach.

61 RADIATION PROTECTION AND DOSIMETRY↗

An acid baking approach to enhance heavy rare earth recovery from bituminous coal-based sources

The recovery of rare earth elements (REEs) from secondary resources, particularly coal-based materials, has recently received attention due to supply and demand imbalance. Research reported to date indicates that a high REE recovery can be realized when treating bituminous coal sources using strong acid solutions of approximately100 g/L or higher. This study introduces an approach to enhance the total rare earth recovery (TREE), especially for heavy rare earth elements (HREEs), from these coal sources at significantly lower acid concentrations. Based on the presence of REE minerals like monazite and xenotime, a detailed investigation was undertaken to quantify three pre-leach treatment methods, i.e., 1) roasting, 2) direct acid baking, and 3) acid baking after roasting. Roasting tests at 600°C revealed that the recovery of light REEs (LREEs) was enhanced while the recovery of HREEs remained relatively unaffected. LREE and HREE recovery values of 38.3% and 21.3%, respectively, were achieved using a 50 g/L (0.5 M) sulfuric acid solution at 5% solid concentration and a solution temperature of 75°C for 2 h. Comparatively, direct acid baking at 250°C provided substantial increases in LREE and HREE recovery values to approximately 49.4% and 53.0%, respectively, using an equivalent acid dosage. Recoveries were maximized to 77.0% and 79.6% for LREE and HREE, respectively, by roasting followed by acid baking. Similar results were obtained from the treatment of a second bituminous coal source. Due to strong correlations between REE and Al recovery values, tests were performed on kaolinite and illite, which were prominent clay minerals within the source coals. In conclusion, these experiments revealed that the REE recovery improvements were likely a result of dehydroxylation of clays and subsequent release and decomposition of REE-bearing minerals such as monazite, xenotime and zircon.

42 ENGINEERING↗

ToF-SIMS spectral analysis of pristine and neutron irradiated single crystal tungsten

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) has many promising features in studying materials including high spatial resolution and high mass accuracy of elements, molecules, and isotopes. Its ability to resolve isotopes is especially attractive in studying transmutation products of single crystal tungsten (SCW) post neutron irradiation. Tungsten (W) is a contender of plasma facing materials (PFMs) due to its high thermal and radiological stability. PFMs to be used in the construction of fusion vessels are subject to high temperature and neutron irradiation, resulting in changes to materials including transmutation, which ultimately impact material mechanical and thermal properties. We used IONTOF TOF.SIMS V instrument equipped with a 30 keV Bi 3 + primary ion beam to study pristine SCW and irradiated SCW speciemens. Scanning electron microscope coupled with focused ion beam (SEM-FIB) was used to reduce the dosage of neutron irradiated tungsten and prepare for specimens for SIMS analysis. Static ToF-SIMS spectra were obtained, and transmutation product peak identification was presented in this work. Identified molecules and molecular fragments were compared against isotope theoretical mass to charge ratios of tungsten, rhenium, osmium, and other relevant products. Our results show that ToF-SIMS provides a viable means to study transmutation products of W post neutron irradiation. Such applications are suitable to investigate transmutation effects on materials that are being considered and developed for fusion pilot plants.

36 MATERIALS SCIENCE↗

Arsenic stabilization performance of a novel starch-modified Fe-Mn binary oxide colloid

Arsenic (As) is an environmentally hazardous contaminant and can be a serious threat to human health. In China, remediation needs for a large number of As-contaminated sites renders a strong demand for efficient remedial reagents and cost effective approaches. In this study, a novel starch-modified Fe-Mn binary oxide (SFM), an amorphous colloidal material, has been synthesized as a remedial reagent and its As stabilization performance has been evaluated. A set of laboratory batch experiments were carried out by directly adding SFM of different dosages into three contaminated soils. Results demonstrated that SFM could transform As in soil from non-specifically and specifically sorbed fractions to the more stable form bounded to amorphous iron hydrous oxides, thus reducing the As concentration in TCLP leachates by 42.0-93.2%. Results from adsorption tests and microscopic analysis indicated that the interactions between SFM and As are mainly controlled by adsorption, oxidation, and precipitation processes. SFM has abundant surface hydroxyl groups, with excellent adsorption properties for both As(V) and As(III), with the maximum adsorption capacities of 160.63 and 284.64 mg/g respectively at pH 7.0. The adsorption process closely fitted pseudo second-order kinetics and Freundlich isotherm model. SFM could increase soil Eh and oxidize As(III) to As(V), which facilitated the As stabilization in soilColloidal iron-based material directly used for stabilization in As contaminated soils is reported here for the first time. Starch modification improves both the reactivity and mobility of SFM in soil. Our findings propose an efficient and convenient reagent for As remediation in soil.

Yan, Xiulan↗