Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DEPLETION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17

Depletion of Vandium in Planetary Mantles: Controlled by Metal, Oxide, or Silicate?

Vanadium concentrations in planetary mantles can provide information about the conditions during early accretion and differentiation. Because V is a slightly siderophile element, it is usually assumed that any depletion would be due to core formation and metal-silicate equilibrium. However, V is typically more compatible in phases such as spinel, magnesiowuestite and garnet. Fractionation of all of these phases would cause depletions more marked than those from metal. In this paper consideration of depletions due to metal, oxide and silicate are critically evaluated.

Righter, Kevin↗

VLF and HF Plasma Waves Associated with Spread-F Plasma Depletions Observed on the C/NOFS Satellite

The C/NOFS spacecraft frequently encounters structured plasma depletions associated with equatorial spread-F along its trajectory that varies between 401 km perigee and 867 km apogee in the low latitude ionosphere. We report two classes of plasma waves detected with the Vector Electric Field Investigation (VEFI) that appear when the plasma frequency is less than the electron gyro frequency, as is common in spread-F depletions where the plasma number density typically decreases below 10(exp 4)/cu cm. In these conditions, both broadband VLF waves with a clear cutoff at the lower hybrid frequency and broadband HF waves with a clear cutoff at the plasma frequency are observed. We interpret these waves as "hiss-type" emissions possibly associated with the flow of suprathermal electrons within the inter-hemispherical magnetic flux tubes. We also report evidence of enhanced wave "transients" sometimes embedded in the broader band emissions that are associated with lightning sferics detected within the depleted plasma regions that appear in both the VLF and HF data. Theoretical implications of these observations are discussed.

Pfaff, Robert↗

On the Distribution of Ion Density Depletion Along Magnetic Field Lines as Deduced Using C-NOFS

To investigate ion density depletion along magnetic field lines, we compare in situ-measured ion density fluctuations as seen from C/NOFS and compare them to the field-line-integrated depletion of the whole bubble as inferred from electric field measurements. Results show that, within C/NOFS' range, local measurement of the normalized density depletion, (Delta)n/n(sub 0), near the apex may be far less than at other points on the same field line. We argue that the distribution of (Delta)n/n(sub 0) is a weighted distribution concentrated at latitudes of the Appleton anomalies and becomes more heavily weighted the closer the field-aligned bubble rises to the peak of the anomalies. A three-dimensional simulation of an ionospheric bubble verifies our arguments.

ion density↗

Sm-Nd and Rb-Sr Isotopic Systematics of a Heavily Shocked Martian Meteorite Tissint and Petrogenesis of Depleted Shergottites

Tissint is a very fresh Martian meteorite that fell near the town of Tissint in Morocco on July 18, 2011. It contains abundant olivine megacrysts (~23%) in a fine-grained matrix of pyroxene (~55%), maskelynitized plagioclase (~15%), opaques (~4%) and melt pockets (~3%) and is petrographically similar to lithologies A and C of picritic shergottite EETA 79001 [1,2]. The presence of 2 types of shock-induced glasses and all 7 high-pressure mineral phases that were ever found in melt pockets of Martian meteorites suggests it underwent an intensive shock metamorphism of ~25 GPa and ~2000 C localized in melt pockets [2]. Mineral textures suggest that olivines, pyroxenes and plagioclases probably did not experience such hightemperature. Earlier determinations of its age yielded 596+/-23 Ma [3] and 616+/-67 Ma [4], respectively, for the Sm-Nd system and 583+/-86 Ma for the Lu-Hf system [4], in agreement with the 575+/-18 Ma age of the oldest olivine-phyric depleted shergottite Dho 019 [5]. However, the exposure ages of Tissint (~1 Ma [1, 6, 7]) and Dho 019 (~20 Ma [8]) are very different requiring two separate ejection events. These previously determined Sm-Nd and Lu-Hf ages are older than the Ar-Ar maskelynite plateau age of 524+/-15 Ma [9], reversing the pattern usually observed for Martian meteorites. In order to clarify these age issues and place models for Tissint's petrogenesis on a firm basis, we present new Rb-Sr and Sm- Nd isotopic results for Tissint, and discuss (a) the shock effects on them and the Ar-Ar chronometer, (b) correlation of the determined ages with those of other depleted shergottites, and (c) the petrogenesis of depleted shergottites. Since the meteorite is a recent fall, terrestrial contamination is expected to be minimal, but, the strong shock metamorphism might be expected to compromise the equilibrium of the isotopic systems.

Shih, C.-Y.↗

Distribution of Alkalis (Na, Cs, Rb) Between Silicate and Sulfide: Implications for Planetary Volatile Depletion

The abundances of volatile elements in the Earth's mantle are correlated with their temperatures of condensation. This depletion can be due to either incomplete condensation of the elements during the nebula condensation or evaporation processes during planetary growth. Elements that have affinities with metals (siderophile) and sulfides (chalcophile) are additionally depleted due to their segregation into the core. Therefore, study of lithophile elements could be useful to isolate processes of volatilization and their effect on the abundance of the elements in the Earth's mantle. However, the correlation of these lithophile elements including alkali elements, with their temperatures of condensation shows a significant scatter, which is difficult to reconcile with a depletion by vaporization or incomplete condensation alone.

Boujibar, A.↗

Comet C/2013 V5 (Oukaimeden): Evidence for Depleted Organic Volatiles and Compositional Heterogeneity as Revealed through Infrared Spectroscopy

We obtained high-resolution (lambda divided by delta times lambda equals approximately 25,000) pre-perihelion spectra of Comet C/2013 V5 (Oukaimeden) using NIRSPEC at Keck II on UT 2014 September 5-6, and CSHELL (Cryogenic Echelle Spectrograph) at the NASA-Infrared Telescope Facility on September 11-13, altogether spanning a range in heliocentric distance R (sub h) equals 0.789-0.698 astronomical units. We report water production rates, and production rates and abundance ratios relative to co-measured H2O for eight trace molecules: CO, H2CO, CH3OH, CH4, C2H2, C2H6, HCN, and NH3. Our measured water production rates from NIRSPEC ( Near Infra-Red Spectrograph) and CSHELL observations remained relatively constant and were close to those from SOHO (Solar and Heliospheric Observatory) / Solar Wind Anisotropies observations that encompassed our dates, suggesting H2O production dominated by release directly from or within approximately 2000 kilometers of the nucleus. All trace volatiles were depleted relative to their respective median abundances among comets, excepting NH3, which was consistent with its median abundance. Most surprising were pronounced increases in abundance ratios for CH3OH (by 51 percent relative to simultaneously measured H2O) and especially C2H6 (by 87 percent) between September 5 and 6. On September 5, C2H6 was severely depleted, consistent with its lowest abundance yet measured for any comet. It also tracked the spatial profile of H2O, suggesting C2H6 was associated with a polar ice phase dominating gas production. On September 6, C2H6 was only moderately depleted and was spatially distinct from H2O, suggesting both polar- and nonpolar-dominated ice phases contributed to the activity then. Our results are consistent with a nonhomogeneous volatile composition for C/2013V5, implying differential processing of its constituent ices.

DiSanti, Michael A.↗

The Signature of Ozone Depletion in Recent Antarctic Precipitation Change: A Study with the Community Earth System Model

Although precipitation is a primary control on Antarctic ice sheet (AIS) mass balance, long-term historical AIS precipitation trends and their underlying external climate drivers remain inconclusive. In this study, we use a novel pair of climate model ensembles to identify a simulated spatial signature of ozone depletion-forced AIS precipitation change. Distinct areas of little change or precipitation decrease, arising from interaction between ozone depletion-forced atmospheric circulation changes and ice sheet topography, are outweighed by large-scale precipitation increases. This signature bears notable similarities to a new ice core-based reconstruction of AIS accumulation change and yields a significant increase in annual integrated precipitation (38 ± 10 Gt/year over the 1986–2005 period or 51 ± 11 Gt/year over the 1991–2005 period). Remarkably, this simulated ozone depletion-forced precipitation change is of a similar absolute magnitude to recent observed AIS mass loss trends and as a consequence, it may play a role in dampening recent AIS sea level rise contributions.

Lenaerts, Jan T. M.↗

Relative Sputtering Rates of FeS, MgS, and Mg Silicates: Implications for ISM Gas Phase Depletions of Rock-Forming Elements

Astronomical measurements of S abundances in the diffuse interstellar medium (ISM) indicate ionized S is a dominant species with little (< 5%) S residing in grains (e.g. Jenkins 2009). This is an enigmatic result, given that abundant Fe-sulfide grains are observed in dust around pre- and post-main sequence stars and are also observed as major components of primitive meteoritic and cometary samples. These disparate observations suggest that the lifetime of sulfide grains in the ISM is short because of destruction processes. Our previous work has shown that FeS and MgS retain their crystallinity and do not amorphize during radiation processing, whereas enstatite and forsterite are readily amorphized. We have extended this study to measure the relative sputtering rates of FeS and MgS compared to enstatite and forsterite. Irradiation of FeS with 4 keV He+ results in preferential sputtering of S and the formation of a thin 2-3 nm, compact Fe metal layer that armors the surface. The zone of S loss extends to a depth of ~8-10 nm below the exposed surface. Despite this S loss, the FeS retains its crystallinity and shows no sign of incipient amorphization. Irradiation of FeS with 5kV Ga+ in a focused ion beam (FIB) instrument resulted in preferential sputtering of S and the formation of a 5-8-nm thick surface layer of nanophase Fe metal. X-ray mapping shows that the zone of S sputtering extends to a depth of nearly 20 nm, but there is no evidence for FeS amorphization, consistent with our previous work. The irradiation experiments show that the relative sputtering rate of FeS and MgS are much higher than olivine or enstatite. Sputtering experiments utilizing 30 kV and 5 kV Ga ions in the FIB produced volume loss in troilite that was ~4X greater than in enstatite or forsterite. The sputter yield under these conditions is such that for every Si atom sputtered from enstatite, ~14 S atoms are sputtered from FeS. We have performed similar sputtering experiments on Fe-bearing niningerite (MgS) and co-existing enstatite from the ALH 84170 EH3 chondrite. MgS also sputters much more rapidly than enstatite with a relative Si:S sputter yield of 1:8. For MgS, sulfur is highly depleted at the surface and the S-depletion zone extends to a depth of ~15 nm (using 5 kV Ga+). There is a corresponding zone of Mg and especially Fe enrichment that extends from 5 to ~10 nm below the surface, respectively. The dominant grain destruction mechanism in the ISM is sputtering from passage of supernova-generated shock waves. This process also results in the amorphization of crystalline silicates in the ISM. Our results indicate that FeS and MgS grains produced in evolved stars and injected into the ISM will be destroyed more rapidly than crystalline silicates. This process may account for the lack of significant depletion of S from the gas phase in the ISM. However, rare nanophase FeS grains occur as inclusions in circumstellar amorphous silicate grains found in comet dust particles analyzed in the laboratory. These results show that a finite amount of S in the ISM is sequestered in solid grains.

SPUTTERING RATES↗

Irrigation-Driven Groundwater Depletion in the Ganges-Brahmaputra Basin Decreases the Streamflow in the Bay of Bengal

Ganges and Brahmaputra, two of Asia’s most prominent rivers, have a crucial role in Southeast Asia’s geopolitics and economy and are home to one of the world’s biggest marine ecosystems. Irrigation-driven groundwater depletion and climate change affect the Ganges-Brahmaputra’s hydrology, threatening the stability of the Bay of Bengal. Here, we quantify, using results from a land reanalysis, the impacts of a changing climate and intensive irrigation on the surface water flowing into the Bay of Bengal. The effects of such activities mostly occurring in the Ganges basin, either intensified or lessened depending on the area by the climatic conditions, decrease freshwater flow into the bay by up to 1200 m 3 /s/year. While the increase in precipitation in the Ganges basin reduces the effects of groundwater depletion on the streamflow, the decrease in precipitation and the snowmelt decline in the Brahmaputra basin exacerbate streamflow reduction due to groundwater depletion at the delta.

Climate change↗

SCALE Continuous-Energy Monte Carlo Depletion with Parallel KENO in TRITON

The TRITON sequence of the SCALE code system is a powerful and robust tool for performing multigroup (MG) reactor physics analysis using either the 2-D deterministic solver NEWT or the 3-D Monte Carlo transport code KENO. However, as with all MG codes, the accuracy of the results depends on the accuracy of the MG cross sections that are generated and/or used. While SCALE resonance self-shielding modules provide rigorous resonance self-shielding, they are based on 1-D models and therefore 2-D or 3-D effects such as heterogeneity of the lattice structures may render final MG cross sections inaccurate. Another potential drawback to MG Monte Carlo depletion is the need to perform resonance self-shielding calculations at each depletion step for each fuel segment that is being depleted. The CPU time and memory required for self-shielding calculations can often eclipse the resources needed for the Monte Carlo transport. This summary presents the results of the new continuous-energy (CE) calculation mode in TRITON. With the new capability, accurate reactor physics analyses can be performed for all types of systems using the SCALE Monte Carlo code KENO as the CE transport solver. In addition, transport calculations can be performed in parallel mode on multiple processors.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Molten Salt Reactor Fuel Depletion Tools in SCALE

Molten salt reactor depletion modeling and simulation tools have been implemented into the SCALE suite for reactor analysis and design developed by Oak Ridge National Laboratory. For depletion with material feeds and removals, additional removal and feed rate functionalities are being developed in ORIGEN to account for these flows during depletion. To track separate fuel and waste materials, additional functions and an iterative scheme are being added to the SCALE/TRITON lattice physics tool. The functionality of these tools has been demonstrated in part for previous analyses using external scripts that manage SCALE/TRITON calculations. Direct implementation of these functionalities into SCALE provides for a more ecient, more accurate material accountability methodology that is accessible to external SCALE users with a new input definition. These implementations are being tested for accuracy and to demonstrate their applicability to predefined molten salt reactor use case problems. This work demonstrates the capability of the SCALE modeling and simulation tools for reactor physics and fuel cycle analysis of molten salt reactor concepts.

Betzler, Benjamin↗

Understanding the haling power depletion (HPD) method

The Pennsylvania State Univ. (PSU) is using the university version of the Studsvik Scandpower Code System (CMS) for research and education purposes. Preparations have been made to incorporate the CMS into the PSU Nuclear Engineering graduate class 'Nuclear Fuel Management' course. The information presented in this paper was developed during the preparation of the material for the course. The Haling Power Depletion (HPD) was presented in the course for the first time. The HPD method has been criticized as not valid by many in the field even though it has been successfully applied at PSU for the past 20 years. It was noticed that the radial power distribution (RPD) for low leakage cores during depletion remained similar to that of the HPD during most of the cycle. Thus, the Haling Power Depletion (HPD) may be used conveniently mainly for low leakage cores. Studies were then made to better understand the HPD and the results are presented in this paper. Many different core configurations can be computed quickly with the HPD without using Burnable Poisons (BP) to produce several excellent low leakage core configurations that are viable for power production. Once the HPD core configuration is chosen for further analysis, techniques are available for establishing the BP design to prevent violating any of the safety constraints in such HPD calculated cores. In summary, in this paper it has been shown that the HPD method can be used for guiding the design for the low leakage core. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Achieving Single-Electron Sensitivity at Enhanced Speed in Fully-Depleted CCDs with Double-Gate MOSFETs

We introduce a new output amplifier for fully-depleted thick p-channel CCDs based on double-gate MOSFETs. The charge amplifier is an n-type MOSFET specifically designed and operated to couple the fully-depleted CCD with high charge-transfer efficiency. The junction coupling between the CCD and MOSFET channels has enabled high sensitivity, demonstrating sub-electron readout noise in one pixel charge measurement. We have also demonstrated the non-destructive readout capability of the device. Achieving single-electron and single-photon per pixel counting in the entire CCD pixel array has been made possible through the averaging of a small number of samples. We have demonstrated fully-depleted CCD readout with better performance than the floating diffusion and floating gate amplifiers available today, in both single and multisampling regimes, boasting at least six times the speed of floating gate amplifiers.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Uncertainty propagation in full-core Monte Carlo depletion simulations using Serpent

The desire to accurately model the heterogeneity of the nuclear reactor environment combined with the ever more powerful computational resources have made in recent years the use of Monte Carlo method more attractive and feasible (if challenging) even for 3-D full core depletion simulation. However, in this case statistical uncertainty is combined with error propagating through the calculation from previous steps. In an effort to understand this error propagation, a numerical study was undertaken and previously reported modeling depletion of a four fuel assemblies (a 'quad'). This work extends results and analysis on a full nuclear reactor core depletion simulation where isotopics of individual fuel pins is tracked. By changing the code's initial random number seed, the data produced by a series of 19 replica runs was used to investigate the true and apparent variance in k{sub eff} and pin powers. It is hoped that this results can help to identify some common regularities in the behavior of uncertainty in several key parameters, and ultimately develop a predictive model. (authors)

97 MATHEMATICS AND COMPUTING↗

Spatially Continuous Depletion Algorithm for Monte Carlo Simulations

To correctly predict reactor behavior during cycle operations, the evolution of nuclide number densities throughout the core must be accurately modeled. The time-varying spatial distribution of nuclide number densities is typically resolved by discretizing the Monte Carlo geometry into smaller cells over which number densities are assumed to be spatially invariant. The nuclide number densities in these smaller cells are integrated through time using reaction rate tallies on the same discretized geometry. However, detailed distributions of nuclide number densities in a full three dimensional simulation can require a prohibitive amount of tallies, and the spatial discretization of the base geometry makes coupling to external multi-physics tools difficult. In this paper a method for solving for spatially continuous number density distributions during depletion calculations will be described. The spatially continuous number densities can be used in the transport method proposed by Brown and Martin which allows for transporting neutrons through a material with continuously varying properties such as temperature and nuclide number densities. Coupled with the ability of Functional Expansion Tallies (FETs) to represent tallied quantities as continuous functions, it is possible to both solve for and make use of spatially continuous nuclide number densities. The need for this capability was alluded to by Brown et. al., but no solution has yet been proposed. With a continuous depletion method, recent work which utilized FETs and continuous material tracking to incorporate multi-physics feedback in Monte Carlo simulations can be extended to simulations that include depletion analysis. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Application of the EPRI depletion reactivity benchmarks - 14423

The EPRI measured-based depletion reactivity benchmarks intend to facilitate the validation of burnup credit by validating the combined effect of changes in isotopic content and cross-sections. In the framework of burnup credit implementation for PWR fuels, this paper proposes to study the application of the EPRI benchmarks for a spent fuel pool criticality evaluation using the French tools: the DARWIN 2.2 depletion package and the CRISTAL V1 criticality safety package, both based on cross-section libraries from the JEF2.2 evaluation. For that purpose, the benchmarks are analyzed using the connection of DARWIN 2.2 with APOLLO2-MORET 4, allowing the determination of the bias for the reactivity decrement. Then, these results are used to define a bias to take into account in the criticality evaluation of a spent fuel pool. In addition, the benefit of the EPRI depletion reactivity benchmarks is assessed through a comparison with the validation approach adopted in France until now. The bias resulting from this latter approach is evaluated by 1) applying, to the calculated nuclides concentrations, isotopic penalizing factors derived from the comparison between calculated values of nuclide concentrations and experimental values obtained from used fuel chemical analyses from French reactors, 2) analyzing representative critical experiments. Additional analysis of the benchmarks using the connection of VESTA 2.1 with MORET 5 is performed as these codes allow calculations of complex 3D geometrical configurations and the use of various nuclear data libraries. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Analysis of an existing spent fuel pool storage rack using current practices and updated depletion bias and uncertainty values - 14458

In accordance with NRC Information Notice 2011-03: Nonconservative Criticality Safety Analysis for Fuel Storage, a US nuclear power plant reviewed their analysis of record (AOR) for possible nonconservative technical specifications related to the criticality safety of fuel storage. During this review, it was determined that some legacy fuel assemblies did not meet all the assumptions of the AOR, but did meet the plant Technical Specifications. The plant entered into an Operability Evaluation in order to evaluate the moderator temperature and boron concentration assumptions used in the AOR, as well as evaluate the impact of including additional biases and depletion uncertainties for the non-borated case. As this study was part of a response to the NRC Information Notice, a full assessment was not conducted. A re-analysis of the spent fuel rack in accordance with current practices was performed. This analysis used the bounding core conditions, and included all biases and depletion uncertainties. The results challenged the 10CFR50.68(b) requirement that 'the k-effective must remain below 1.0 (subcritical), at a 95 percent probability, 95 percent confidence level, if flooded with un-borated water'. Credits for additional reactivity offsets were then analyzed. Previous assumptions for the measurement uncertainty were evaluated and subsequently reduced. New values for the depletion bias and uncertainty were applied. More detailed, realistic modeling was used to remove conservatisms. The results showed that the storage racks met the 10CFR50.68(b) criteria for the un-borated case. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

An APEC-covered 2-D NEM macroscopic depletion analysis of partial MOX SMRs

A proper leakage correction is mandatory for a depletion analysis based on the conventional two-step method to take into account neighborhood effect. This study aims to apply the albedo-corrected parameterized equivalence constant (APEC) method to a macroscopic depletion in 2-D NEM analysis and assess the performance of introduced 1x1 and 2x2 APEC leakage corrections. The main idea of the APEC leakage correction is to correct homogenized group constants (HGCs) by predetermined APEC functions as a function of a normalized leakage parameter, current-to-flux ratio (CFR). Predetermined APEC functions consist of APEC cross-section (XS) and discontinuity factor (DF), and various color-set burnup calculations are conducted to generate burnup-dependent APEC functions. In this work, partial MOX SMR and variant cores are introduced to evaluate the applicability of the APEC leakage correction even in partially MOX-loaded SMRs, which are difficult to be analyzed by the conventional two-step method. Results show that the burnup-dependent 2x2 APEC leakage correction can improve the nodal equivalence in partial MOX SMRs. The burnup-dependent 2x2 APEC leakage correction is recommended to overcome the inherent limitation of the macroscopic depletion analysis with the conventional two-step method. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗