Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DEGREES OF FREEDOM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 307 records · Page 17
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Nodal Constraint, Shear Deformation and Continuity Effects Related to the Modeling of Debonding of Laminates, Using Plate Elements

The effects of several critical assumptions and parameters on the computation of strain energy release rates for delamination and debond configurations modeled with plate elements have been quantified. The method of calculation is based on the virtual crack closure technique (VCCT), and models of the upper and lower surface of the delamination or debond that use two-dimensional (2D) plate elements rather than three-dimensional (3D) solid elements. The major advantages of the plate element modeling technique are a smaller model size and simpler configurational modeling. Specific issues that are discussed include: constraint of translational degrees of freedom, rotational degrees of freedom or both in the neighborhood of the debond front, shear deformation assumptions; and continuity of material properties and section stiffness in the vicinity of the debond front. Where appropriate, the plate element analyses are compared with corresponding two-dimensional plane strain analyses.

Glaessgen, E. H.↗
NASA NTRS1998

Effect of Shear Deformation and Continuity on Delamination Modelling with Plate Elements

The effects of several critical assumptions and parameters on the computation of strain energy release rates for delamination and debond configurations modeled with plate elements have been quantified. The method of calculation is based on the virtual crack closure technique (VCCT), and models that model the upper and lower surface of the delamination or debond with two-dimensional (2D) plate elements rather than three-dimensional (3D) solid elements. The major advantages of the plate element modeling technique are a smaller model size and simpler geometric modeling. Specific issues that are discussed include: constraint of translational degrees of freedom, rotational degrees of freedom or both in the neighborhood of the crack tip; element order and assumed shear deformation; and continuity of material properties and section stiffness in the vicinity of the debond front, Where appropriate, the plate element analyses are compared with corresponding two-dimensional plane strain analyses.

Glaessgen, E. H.↗
NASA NTRS2001

Spinning Rocket Simulator Turntable Design

Contained herein is the research and data acquired from the Turntable Design portion of the Spinning Rocket Simulator (SRS) project. The SRS Project studies and eliminates the effect of coning on thrust-propelled spacecraft. This design and construction of the turntable adds a structural support for the SRS model and two degrees of freedom. The two degrees of freedom, radial and circumferential, will help develop a simulated thrust force perpendicular to the plane of the spacecraft model while undergoing an unstable coning motion. The Turntable consists of a ten-foot linear track mounted to a sprocket and press-fit to a thrust bearing. A two-inch high column grounded by a Triangular Baseplate supports this bearing and houses the slip rings and pressurized, air-line swivel. The thrust bearing allows the entire system to rotate under the moment applied through the chain-driven sprocket producing a circumferential degree of freedom. The radial degree of freedom is given to the model through the helically threaded linear track. This track allows the Model Support and Counter Balance to simultaneously reposition according to the coning motion of the Model. Two design factors that hinder the linear track are bending and twist due to torsion. A Standard Aluminum "C" channel significantly reduces these two deflections. Safety considerations dictate the design of all the components involved in this project.

Miles, Robert W.↗
NASA NTRS1990

Modeling and model simplification of aeroelastic vehicles

The rigid-body degrees of freedom and elastic degrees of freedom of aeroelastic vehicles are typically treated separately in dynamic analysis. Such a decoupling, however, is not always justified and modeling assumptions that imply decoupling must be used with caution. The frequency separation between the rigid-body and elastic degrees of freedom for advanced aircraft may no longer be sufficient to permit the typical treatment of the vehicle dynamics. Integrated, elastic vehicle models must be developed initially and simplified in a manner appropriate to and consistent with the intended application. This paper summarizes key results from the research aimed at developing and implementing integrated aeroelastic vehicle models for flight controls analysis and design. Three major areas will be addressed: (1) the accurate representation of the dynamics of aeroelastic vehicles, (2) properties of several model simplification methods, and (3) the importance of understanding the physics of the system being modeled and of having a model which exposes the underlying physical causes for critical dynamic characteristics.

Waszak, Martin R.↗
NASA NTRS1992

Modeling and model simplification of aeroelastic vehicles: An overview

The rigid-body degrees of freedom and elastic degrees of freedom of aeroelastic vehicles are typically treated separately in dynamic analysis. Such a decoupling, however, is not always justified and modeling assumptions that imply decoupling must be used with caution. The frequency separation between the rigid-body and elastic degrees of freedom for advanced aircraft may no longer be sufficient to permit the typical treatment of the vehicle dynamics. Integrated, elastic vehicle models must be developed initially and simplified in a manner appropriate to and consistent with the intended application. This paper summarizes key results from past research aimed at developing and implementing integrated aeroelastic vehicle models for flight controls analysis and design. Three major areas will be addressed: (1) the accurate representation of the dynamics of aeroelastic vehicles, (2) properties of several model simplification methods, and (3) the importance of understanding the physics of the system being modeled and of having a model which exposes the underlying physical causes for critical dynamic characteristics.

Waszak, Martin R.↗
DOE OSTI2023

A Threshold Helium Leakage Detection Switch with Ultra Low Power Operation

Detecting helium leakage is important in many applications, such as in dry cask nuclear waste storage systems. This work develops a helium detection system based on the relative permittivity (dielectric constant) difference between air and helium. This difference changes the status of an electrostatic microelectromechanical system (MEMS) switch. The switch is a capacitive-based device and requires a very negligible amount of power. Exciting the switch’s electrical resonance enhances the MEMS switch sensitivity to detect low helium concentration. This work simulates two different MEMS switch configurations: a cantilever-based MEMS modeled as a single-degree-freedom model and a clamped-clamped beam MEMS molded using the COMSOL Multiphysics finite-element software. While both configurations demonstrate the switch’s simple operation concept, the clamped-clamped beam was selected for detailed parametric characterization due to its comprehensive modeling approach. The beam detects at least 5% helium concentration levels when excited at 3.8 MHz, near electrical resonance. The switch performance decreases at lower excitation frequencies or increases the circuit resistance. The MEMS sensor detection level was relatively immune to beam thickness and parasitic capacitance changes. However, higher parasitic capacitance increases the switch’s susceptibility to errors, fluctuations, and uncertainties.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
NASA NTRS1987

Precise computer controlled positioning of robot end effectors using force sensors

A major problem in space applications of robotics and docking of spacecraft is the development of technology for automated precise positioning of mating components with smooth motion and soft contact. To achieve the above objective, a design method was developed for optimally placing the closed-loop poles of a discretized robotic control system at exact prescribed locations inside the unit circle of the complex z-plane. The design method combines the merits of the pole placement and the linear quadratic design approaches. The proposed design procedure is based on the assignment of one real eigenvalue or two complex conjugate (or real) eigenvalues at each design step. The method involves solutions of simple algebraic equations and this is considered to be efficient for on-line or off-line computations. Also, two methods for the linearization of the nonlinear model of a robotic manipulator were presented. Since automatic control of multi-degree freedom robotic manipulators involves high nonlinear equations of systems, a pilot project was proposed involving the control of a one-dimensional system. This simple system can be readily implemented for testing the concepts and algorithms.

Shieh, Leang S.↗
NASA NTRS1977

Accomplishments in ride quality research: Present and near future

Areas of research in the field of ride quality were categorized into generic subdivisions. The following generic areas were identified: single degree of freedom simulations, multiple degrees of freedom simulations, field simulations, field experiments, surveys/reviews, and modeling techniques. From this review a consensus was reached on the projection of needs for future research efforts, including a prioritization, as well as time and cost estimates of ride quality studies.

Source record↗
NASA NTRS1984

Application of modern structural optimization to vibration reduction in rotorcraft

The helicopter rotor model consists of a four bladed hingeless rotor attached to a fuselage. The helicopter is assumed to be in trimmed forward flight. Each blade is assumed to have flap, lag, and torsional degrees of freedom. The fuselage degrees of freedom are not included in the analysis. Thus the aeroelastic stability and response analysis upon which this study is based is an isolated blade analysis. The helicopter rotor vibration reduction problem expressed as a general class of structural synthesis problems is given.

Friedmann, P. P.↗
NASA NTRS2004

The Formation Control Testbed

This paper describes the design and construction of the Formation Control Testbed. The FCT consists of three robots navigating on an air bearing floor, propelled by cold gas thrusters. Each robot contains an attitude platform supported on a spherical air bearing which provides three rotational degrees of freedom. The sixth degree of freedom, vertical translation, will be provided by a powered vertical stage, actively controlled to provide a simulated zero-g environment for the attitude platform.

Singh, Gurkirpal↗
NASA NTRS1994

Decentralized control of large flexible structures by joint decoupling

This paper presents a novel method to design decentralized controllers for large complex flexible structures by using the idea of joint decoupling. Decoupling of joint degrees of freedom from the interior degrees of freedom is achieved by setting the joint actuator commands to cancel the internal forces exerting on the joint degrees of freedom. By doing so, the interactions between substructures are eliminated. The global structure control design problem is then decomposed into several substructure control design problems. Control commands for interior actuators are set to be localized state feedback using decentralized observers for state estimation. The proposed decentralized controllers can operate successfully at the individual substructure level as well as at the global structure level. Not only control design but also control implementation is decentralized. A two-component mass-spring-damper system is used as an example to demonstrate the proposed method.

LINEAR QUADRATIC REGULATOR MET↗
NASA NTRS1993

Mechanical flexible joint design document

The purpose of this report is to document the status of the Mechanical Flexible Joint (MFJ) Design Subtask with the intent of halting work on the design. Recommendations for future work is included in the case that the task is to be resumed. The MFJ is designed to eliminate two failure points from the current flex joint configuration, the inner 'tripod configuration' and the outer containment jacket. The MFJ will also be designed to flex 13.5 degrees and have three degrees of freedom. By having three degrees of freedom, the MFJ will allow the Low Pressure Fuel Duct to twist and remove the necessity to angulate the full 11 degrees currently required. The current flex joints are very labor intensive and very costly and a simple alternative is being sought. The MFJ is designed with a greater angular displacement, with three degrees of freedom, to reside in the same overall envelope, to meet weight constraints of the current bellows, to be compatible with cryogenic fuel and oxidizers, and also to be man-rated.

Daily, Vic↗
NASA NTRS1992

Human-like agents with posture planning ability

Human body models are geometric structures which may be ultimately controlled by kinematically manipulating their joints, but for animation, it is desirable to control them in terms of task-level goals. We address a fundamental problem in achieving task-level postural goals: controlling massively redundant degrees of freedom. We reduce the degrees of freedom by introducing significant control points and vectors, e.g., pelvis forward vector, palm up vector, and torso up vector, etc. This reduced set of parameters are used to enumerate primitive motions and motion dependencies among them, and thus to select from a small set of alternative postures (e.g., bend vs. squat to lower shoulder height). A plan for a given goal is found by incrementally constructing a goal/constraint set based on the given goal, motion dependencies, collision avoidance requirements, and discovered failures. Global postures satisfying a given goal/constraint set are determined with the help of incremental mental simulation which uses a robust inverse kinematics algorithm. The contributions of the present work are: (1) There is no need to specify beforehand the final goal configuration, which is unrealistic for the human body, and (2) the degrees of freedom problem becomes easier by representing body configurations in terms of 'lumped' control parameters, that is, control points and vectors.

Jung, Moon R.↗
NASA NTRS1975

Simulator studies and psychophysical ride comfort models

An elementary psychophysical model to predict ride comfort was developed using flight and simulator data where subjects were exposed to six degrees of freedom. The model presumes that the comfort response is proportional to the logarithm of the stimulus above some threshold stimulus. In order to verify this concept of comfort modeling, it was necessary to obtain ride comfort data for single degree of freedom random motions and for combinations of random motions. Accordingly, a simulator program was performed at the NASA Langley Research Center to measure subjective comfort response ratings using one degree of freedom, two degrees of freedom, three degrees of freedom, and six degrees of freedom. An analysis of the single degree of freedom and two degrees of freedom data is presented. Preliminary models of ride comfort response for single degree of freedom random motions and for certain combinations of two degrees of freedom random motions were developed.

Stone, R. W., Jr.↗
DOE OSTI2020

SD-pair shell model: Vibrational and rotational limits in the interacting boson–fermion model for like-nucleon system

Typical features of the Bose–Fermi symmetries associated with [Formula: see text] and [Formula: see text] limits in the interacting boson model are described in the SD-pair shell model (SDPSM) framework for like-nucleon system. It is found that the limiting spectra associated with [Formula: see text] (vibrational) and [Formula: see text] (rotational) in the interacting boson–fermion model can be well reproduced in the SDPSM framework. It is shown that coupling of collective degree of freedom with the single-particle degree of freedom in the pairing interaction almost has no effect on the spectrum of odd-A system comparing to the adjacent even–even system, while the coupling of the collective degree of freedom with the single-particle degree of freedom in the quadrupole–quadrupole interaction results in the level splitting of several excited levels.

Physics↗